Upgrade A Standard Tandem Axle Landscape Model From 3500 lb to 5200 lb Axles (also upgrades frame and wheel size)

This will upgrade from standard 3500 lb tandem axles to 5200 lb tandem axles, also upgrades to heavier mainframe and to 6 lug larger wheels/tires.

Upgrade Any 76” Wide Single 3500 lb Axle Model to 82” Wide w/5200 lb Single Axle w/Elec Brakes (upgrades frame)

Choose this if ordering a single axle 76” wide model standard with 3500 lb 5-lug axle (no brakes)  and you wish to upgrade to heavier 5200 lb 6-lug single axle with electric brakes, and also upgrades to wider 82” bed, also upgrades main frame to 5”x3” also includes required DOT safety breakaway kit, also upgrades to larger 2-5/16” ball coupler.

Upgrade Any Carhauler from Tandem 3500# to 5200# Axles

Upgrades both axles to 5200#, also upgrades to 6 Lug larger radial tires, upgrades mainframe and tongue

Upgrade Both Axles on Any Equipment Trailer from 12K to 14K GVWR

This upgrades the axles from standard 6000 lb to 7000 lb and upgrades tires and framework.

Upgrade Both Axles on Any Equipment Trailer from 12K to 16K GVWR

This upgrades the axles from standard 6000 lb to 8000 lb and upgrades tires and framework.

Upgrade Both Axles on Any Equipment Trailer from 14K to 16K GVWR

This upgrades the axles from standard 7000 lb to 8000 lb and upgrades tires and framework.

Upgrade from Tandem 3500# to 5200# Brake Axles (18'-20' Landscape Models)

Upgrade from standard 3500# to 5200# axles--Also includes mainframe, tongue, & larger 6 lug wheels and tire size upgrade.

Upgrade Single Idler (no brakes) Axle Landscape Trailer to Electric Brake Axle

Upgrade the standard no brake (idler) single axle to electric brakes with safety breakaway and 7 pin wiring plug.

Add Bed Length (30' Max Length) to Any Deck Overbed Model ($400 per foot)

Choose this option to add deck length to any deck overbed model. Price is per foot added. Add to cart, then update quantity in cart to the number of extra feet you want to add. Up to a maximum trailer bed length of 30'

Add Expanded Metal to Any Standard Height Rail on Single Axle Model Up to 14'

Add expanded metal (wire mesh) to any standard height open side rail on any single axle landscape trailer up to 14' long

Add Flat Steel Center Bar Around Any 24” High Sides Model

This adds a flat steel bar around the middle of the high side on any high side model size.

Convert to 2' Rear Dovetail on Any Wood Deck Carhauler

Converts the standard flat rear 2' of any length wood deck car trailer to a dovetail. (Does not add any overall length to the trailer)

Locking Landscape Storage Box Fits 6' or 7' Wide (Welded or Bolted On)

To Fit Any  6' or 7' wide Landscape Trailer-Lid opens on the top. Your choice welded or bolted on,  across the front (indicate your choice in order checkout notes)

Upgrade Any Tandem Axle Model to Diamond Plate Fenders ILO Standard Teardrop Fenders

This upgrades any standard teardrop tandem axle model to diamond plate tandem fenders. (Not available on single axle models)

Upgrade Bed Deck to Diamond Plate Steel-Any Width Model ($99 per linear foot)

Choose this to upgrade from standard treated wood deck to diamond plate steel deck. Price is calculated at per linear foot length on any width model.

Upgrade the 20 Ft' Long (Model E720.12KD) to 24' Long

Also upgrades the mainframe to 8” channel

Upgrade the 20' long (Model E720.12KD) to 22' Long

Also upgrades the mainframe to 8” channel

Upgrade the 20' Long Model LD620 to 22' Long

Adds 2' length with standard specs of 20' long model LD620

Upgrade to 22' Long Skidsteer from Standard 20' (SS720.14K)

Upgrade to 24” Expanded Metal Sides-Any 18' & Longer Landscape Trailer

Upgrades from standard 14” open rail sides to 24” high sides with expanded metal (wire mesh) all around, any standard landscape model 18' or longer.

Upgrade to 4' High Expanded Metal Sides On Any Standard 2' High Expanded Metal Sides Model Up to 16'

Increases a standard high side model from 2' to 4' high expanded metal sides & front, up to 16' long model.

Upgrade to Wrapped Tongue-Tandem Axle Landscape Models

Upgrade the standard tongue to a stronger wrapped tongue on any tandem axle landscape model

Upgrade Width on Standard 76” Landscape Trailer to 82” Wide (10'-16' Models)

Upgrade any 10'-16'  long model landscape trailer from the standard 76” width to 82” width

Upgrade Width on Standard 76” Landscape Trailer to 82” Wide (18'-20' Models Only)

Upgrades any 18'-20' landscape trailer from standard 76” width to 82” width

Extend the Standard Tongue by 12” on ANY Bumper Pull Model

On landscape models and car trailers, extends the standard 42” tongue to about 54”. On equipment models, extends the standard 48” tongue to about 60”-all measurements approximate.

Upgrade Any Carhauler to Pintle Ring Style Coupler

Upgrade Any Deluxe Model Equipment Trailer to Adjustable Height Pintle Ring Coupler

This upgrades a deluxe model equipment trailer from the standard adjustable height 2-5/16” ball coupler to pintle ring coupler.

Upgrade Any Tandem Axle Model to 2-5/16” Adjustable Height Coupler

Choose this option to upgrade any tandem axle model with a standard 2-5/16” coupler, to the adjustable height 2-5/16: coupler.

Upgrade Standard Overbed Model to Pintle Ring Instead of Ball Coupler Hitch

Changes a standard equipment trailer to fixed pintle ring coupler instead of fixed 2-5/16” ball coupler

Add D-Rings Tie-Downs

Cost per each ring, add to cart, then update to desired quantity in cart

Upgrade Any Gooseneck Model to Dual (2) Front Jacks

Choose this option to upgrade from one gooseneck jack to two gooseneck jacks. Adds more lift capacity and stability, if needed.

Upgrade From A-frame Tongue Jack to Flip Up Jack

Upgrade from the standard tongue jack to a flip up/away jack on any landscape model trailer, single or double axle that comes standard with a jack

Upgrade From Standard Jack Placement to Set-Back Jack (to avoid hitting most tailgate)

For standard single or double axle landscape type trailers with tongue jacks. Choose this option and the wind up tongue jack will be set-back into the center of the A-frame tongue on an additional welded cross plate. This allows you to lower the pick up truck tailgate without hitting the tongue jack on most vehicles.

Upgrade Overbed Model to 10K Jack

Add 5' Long Slide-In Load Ramps to Any Overbed Flat Deck Model (no dovetail)

This is only for flat deck overbed models that come standard with no dovetail or ramps. These are two 4” steel ladder ramps that slide in from the rear. Please note that overbed models deck height is approx 36” and the ramps are 5'long so angle is steep.

Add 5' Wide Side Load Ramp Gate to Any 24”High Side Landscape Model (12' SA or Any Length TA 14' or Longer)

This option is for 24” high side height models only. Only available on a 12' long single axle. Available on all tandem axles 16' and longer. Adds an additional 5' wide ramp load gate to the side of the trailer for side loading. Can only be installed in front of axle(s). Normally on curbside but can be on driver side if requested.

Add 5' Wide Side Load Ramp Gate to Any Standard Height Landscape Model (12' SA or 14'-20' TA)

This option is for standard side rail height models only. Only available on a 12' long single axle. Available on all tandem axles 14' and longer. Adds an additional 5' wide ramp load gate to the side of the trailer for side loading. Can only be installed in front of axle(s). Normally on curbside but can be on driver side if requested.

Add a 3rd 5' Slide-in Load Ramp to ANY Car Hauler Trailer

Car trailers come standard with two slide-in load ramps that can be placed anywhere on the rear of trailer for loading. If you need a 3rd ramp (for example to load a 3-wheel trike), choose this option to add the extra 3rd ramp.

Add a 3rd Rear 5' Center Load Ramp on Equipment Trailer

Add to any trailer standard with two rear load ramps. All ramps are adjustable side to side on a slide bar.

Add Ladder Ramping Inside Framing on Rear Load Gate on Any Landscape Model

Ladder ramps are  built into the 4'tall rear ramp load gate frame covered over by the expanded metal (wire mesh).

Add Spring Assist on Gooseneck Load Ramps

Add Spring Assist on Rear Equipment Model Load Ramps

Available on equipment trailers with standard fold up ramps. Assists in easier raising and lowering.

Add Tread Plate Steel On Tops of Rear Load Ramps on Any Equipment Trailer w/Ramps

Add this option if you want solid tread plate steel tops added on the standard rear ladder style load ramps on any equipment trailer.

Flip Up 5' Long Load Ramps Instead of Standard Rear Gate (12'-20' Tandem Axle Models Only)

Changes from standard rear single 4' tall load gate to 5' flip up load ramps on Tandem Axle Landscape Trailers 12'-20' models only

Slide-in 5' Long Load Ramps Instead of Standard Rear Gate (18'-20' Models Only)

Changes from standard rear single 4' tall load gate to 5' long slide-in stow-away load ramps on Landscape Trailers 18'-20' models only

Spring Assist Easy Lift on Any Landscape Trailer Ramp Gate

Add a 2-way spring assist on any landscape trailer ramp load gate for easier raising and lowering.

Upgrade Any Width Landscape Trailer Ramp Gate to Heavier Duty Ramp Gate

This adds more bracing for heavier duty ramp gate on any width landscape trailer.

Upgrade From Standard 4' to 5' Tall Heavy Duty Ramp Rear Gate (Landscape Models)

This upgrades any landscape trailer from a standard 4' rear gate to a longer and stronger 5' ramp gate. Also easily removable or lay flat just like standard ramp gate. Note: Gate is much heavier than standard gate so it is suggested to add spring assist separately if desired.

Upgrade to Split Rear Gate (10'-16' Landscape Models)

Change from standard single rear gate to split gate on any landscape trailer 10'-16' long

Spare 5 Lug 12” Wheel & Bias Ply Tire (Fits 2000 lb Axle)

One matching 5 lug spare 12” wheel with bias ply tire to fit 2000 lb axle light duty models.

Spare 5 Lug 13” Wheel & Bias Ply Tire (Fits 2000 lb Axle)

One matching 5 lug spare 13” wheel with bias ply tire to fit 2000 lb axle light duty models.

Spare 5 Lug 15” Wheel & Radial Tire (Fits 3500 lb Axle)

One matching 5 lug spare 15” wheel and radial tire

Spare 6 Lug 15” Wheel & Radial Tire (Fits 5200 lb Axle)

One matching 6 lug spare 15” wheel and radial tire

Spare 8 Lug 16” Wheel & Radial Tire (Fits 6k or 7k lb Axles)

One matching 8 lug spare 16” wheel and radial tire fits 6000 lb or 7000 lb axles

Spare Tire Bracket in Gooseneck