Econoline 9-Ton 102″ x 18′ Tri-Axle Deckover Flatbed Trailer

Add Bed Length to Dovetail & Flatbed 15-30 Ton Models (per linear foot) 40' Max

Charge is per linear foot added. Add item to cart and then adjust/update your cart to the total additional feet desired. NOTE: If ordering 27' or longer trailer, Belly Strapping is also required and must also be added to your order separately.

Add Bed Length to Dovetail & Flatbed 5-12 Ton Models (per linear foot)

Charge is per linear foot added. Add item to cart and then adjust/update your cart to the total additional feet desired. NOTE: If ordering 27' or longer trailer, Belly Strapping is also required and must also be added to your order separately.

Add Belly Strapping to Bed of Any Length Trailer (required on any 27' or longer trailer)

Belly Strapping is required on any trailer 27' long or longer. Flat price is for any length model 27' or longer.

Add Stationary Front Bed Length to Any Tilt Bed 15-30 Ton Models (per linear foot)

Extra length is added as a stationary front deck. Charge is per linear foot added and must be ordered in 2' increments with minimum of 4'. Add item to cart and then adjust/update your cart to the total additional feet desired. NOTE: If ordering a 27' or longer trailer, Belly Strapping is also required and must also be added to your order separately.

Add Stationary Front Bed Length to Any Tilt Bed 5-12 Ton Models (per linear foot)

Extra length is added as stationary front deck. Charge is per linear foot added and must be added in 2' increments, minimum of 4'. Add item to cart and then adjust/update your cart to the total additional feet desired. NOTE: If ordering 27' or longer trailer, Belly Strapping is also required and must also be added to your order separately.

Diamond Plate Over Wheel Area on Deckover Models

Diamond Plate in deck over all wheels in lieu of oak

Fork Tube Guides (pair)

Available on flatbed deck-over models only.

Honda Gas Powered Hydraulic Lift Pump for Dump Trailer Bed

Electric and pull start Honda gas engine to have on board power any time for dumping your trailer, even if your 12V power supply is dead.

Recessed D-Rings in Deck

Per each. Welded on and recessed in deck

Remote Controlled Power Tilt (For Any 5-30 Ton Tilt Bed Models)

12V  Remote controlled power

Upgrade Any Wood Deck Model to Steel Deck ($55 per linear foot)

This changes your trailer deck from standard wood to steel. Priced per linear foot x length of your trailer. Add to your cart then change quantity to the overall length of your trailer.

Upgrade Loader Toter or Mini Max Models from Pine to Oak Decking (Oak is standard on all other models)

ALL Econoline models EXCEPT Loader Toter and Mini Max Series come standard with Oak decking. Choose this option to upgrade any size Loader Toter or Mini Max model to oak decking. Flat charge for any length model.

Upgrade to Drop Deck 5th Wheel Coupler (18 wheeler type) For 25,500# GVWR or Higher

Choose this to upgrade a standard bumper pull or goose-neck model to a 5th wheel type coupler including additional 11' long drop deck. (Cannot be added on any base trailer over 36' long because it adds 11' extra overall length). This option to be used on models rated a minimum of 25,500 # GVWR if you do not want a bumper pull.

Welded-On Side D-Rings In Lieu of Standard Rub Rail & Stake Pockets (102” Wide Models))

Choose this option if you want D-rings only and DO Not want the standard rub rail with stake pockets. (25' bed will have 3 D-rings each side)

Winch Mounting Plate in Bed

Steel plate only. Mounted centered front unless otherwise specified with order

Upgrade Standard Stationary Oak Dovetail to Self Cleaning Steel Pop-Up Dovetail

Upgrade a standard 5' stationary oak dovetail to a steel self cleaning spring assisted pop up steel dovetail.

Upgrade Standard Stationary Oak Dovetail to Stationary Steel Self Cleaning Dovetail

Goose-neck Storage Toolbox w/Locking Lid

Add this to any goose-neck non-tilt model only. Mounted between uprights.

Upgrade from (1) One Single Speed to (1) One 2-Speed Jack

This is an upgrade for any trailer standard with one single speed 12,000 lb capacity jack, to one 2-speed 25,000 lb capacity jack.

Upgrade from (1) One to (2) Two Single Speed Jacks

This is an upgrade for any trailer standard with one single speed 12,000 lb capacity jack. Adds a second single speed 12,000 lb capacity  jack. (Must add tool box shown separately if desired)

Upgrade From Standard Jacks to Dual (2) Hydraulic Jacks

Upgrade is only available on selected models.

Upgrade to Dual (2) 2-Speed Jacks

25,000 lb capacity per each 2 speed jack. This is an upgrade from one standard single speed jack to two dual (2) 2-speed jacks. (Add tool box shown separately, if desired)

Add 2-Way Spring Assist to Standard Ramps

Assist in raising and lowering load ramps

Add a 3rd Deck Level 5' Ramp Including Tall Header Modification

Add a 3rd Standard 5' Load Ramp (Including Tall Header Modification)

Adds extra standard load ramp

Add Extra Length to Any Standard Ramps (Per Foot For Pair)

Standard ramps are 5' long. Add length by the foot to any standard set of ramps. Add to cart then change quantity in cart to how extra many feet you want to add to ramps. Price is per foot.

Add Extra Spring to Standard Rear Load Ramps

Assists in raising up ramps.

Add Stand-up Arms to Load Ramps

For any 5' or longer dovetail model. Included on all Loader Toter models with 2' dovetail

Add Steel Tread Plate to Standard Ramps

Add Wood Fill Inserted on 5' or 6' Standard Ramps (For Pair)

Hydraulic Rear Load Ramps 36” x 72” (Upgrade)

Remote control, electric activated over hydraulic. Available on any model in lieu of standard ramps.

Taper Standard Ramps to Knife Edge on Ground End

Upgrade Standard 5' Fold-up Load Ramps to Wood Filled Tapered Ramps

Available on selected models only.

Upgrade Standard 5' Ramps to Deck-Level 6' Standard Ramps (must have 6' Dovetail)

Trailer must have a 6' dovetail to add deck level ramps, so standard 5' is increased to 6' dovetail, no overall trailer bed length is added.

Upgrade Standard 5' Ramps to Deck-Level 6' Super Steel Mega Ramps (must have 6' Dovetail) 7-12 Ton Models Only

Trailer must be built with a 6' dovetail to upgrade to deck level super  solid plate ramps with two-way spring assist. So the standard 5' dovetail is increased to 6', no extra overall trailer length is added. Available only 7-12 ton models.

Mount Bracket for Spare Tire - All Gooseneck Models

Mount bracket on gooseneck

Mount Bracket for Spare Tire on Tongue-Bumper Pull Models

Tongue mount bracket on any tag-along bumper pull trailer

Spare 215 75 R17.5 16 PLY to Fit a Dual Hub Axle

Per each spare wheel & tire

Spare 215 75 R17.5 16 PLY to Fit a Single Hub Axle

Per each spare wheel & tire

Spare 235 75 R17.5 18 PLY to Fit a Dual Hub Axle

Per each spare wheel & tire

Spare 235 75 R17.5 18 PLY to Fit a Single Hub Axle

Per each spare wheel & tire

Spare 235 80 R16 10 PLY to Fit a Dual Hub Axle

Per each spare wheel & tire

Spare 235 80 R16 10 PLY to Fit a Single Hub Axle

Per each spare wheel & tire

Spare 235 85 R16 14 PLY to Fit a Dual Hub Axle

Per each spare wheel & tire

Spare 235 85 R16 14 PLY to Fit a Single Hub Axle

Per each spare wheel & tire

2 5/16 Ball Hitch Upgrade by ”Hit n' Hitch”

For models with standard 2-5/16” coupler

5' Tongue Upgrade (Mini Max Models Only) 5' Standard on all other models

5' tongue is standard on all models except Mini Max. Mini Max tongue is standard 4'

6' Tongue Upgrade

7' Tongue Upgrade

Goose-neck Storage Toolbox w/Locking Lid

Add this to any goose-neck non-tilt model only. Mounted between uprights.

Platform over Gooseneck (Treadplate Steel 8' x 6')

Platform over Gooseneck (Wood Deck 8' x 6')

Add on any goose-neck model

Tongue Chain Storage with Locking Lid

In Tongue Storage w/Locking Lid

Tongue Chain Storage without Locking Lid

Open in In Tongue-NO  Lid

Upgrade Any Bumper Pull 14 or 15 Ton Model to HD Goose-neck w/3” Bull Dog Coupler

Choose this heavy duty upgrade only for a 14 ton or 15 ton GVWR bumper pull model. A goose-neck option cannot be added to any model over 15 ton. This goose-neck coupler requires the HD 3” ball. (Add a storage box separately if desired)

Upgrade Any Bumper Pull Trailer Up to 14 Ton to Standard 2-5/16” Goose-neck

Choose this to upgrade from a bumper pull to a standard goose-neck 2-5/16” ball hitch on any trailer up to and including a 14 ton. 15 ton models require the HD 3” goose-neck option. Models over 15 ton require the 5th wheel drop deck coupler (18 wheeler type) option. (Purchase tool box separately and available on non-tilt models only)

Upgrade to Drop Deck 5th Wheel Coupler (18 wheeler type) For 25,500# GVWR or Higher

Choose this to upgrade a standard bumper pull or goose-neck model to a 5th wheel type coupler including additional 11' long drop deck. (Cannot be added on any base trailer over 36' long because it adds 11' extra overall length). This option to be used on models rated a minimum of 25,500 # GVWR if you do not want a bumper pull.

4' Locking Toolbox Mounted Under Bed (each box)

Price is per each 24” x 48” box mounted your location choice. For Flatbed deck-over models only. Add to cart then change cart to desired quantity of boxes. Box locks but is not moisture proof.

Chain/Tool Storage Box w/ Locking Lid

Tongue mounted

Goose-neck Storage Toolbox w/Locking Lid

Add this to any goose-neck non-tilt model only. Mounted between uprights.

Tongue Chain Storage without Locking Lid

Open in In Tongue-NO  Lid