Econoline 24-Ton 102" x 30' Heavy Duty Dual-Tandem Tilt Trailer *Air Brakes*
$
48,227.00
$
37,999.00
Model Number: DP2430TA
| Hitch Type | 4-bolt, 5-position pintle hitch |
| Axles | (2) 22,500 lb. axles with oil bath bearings |
| Bed Type | tilt w/one single speed jack |
| Bed Length | 30' tilt bed (standard) or 25' tilt + 5' stationary |
| Bed Width | 102" w/rub rail & stake pockets |
| Bed Height | 40" from ground level (approx.), 14 degree tilt (approx.) |
| Capacity | 52,000 lb. GVWR |
| Trailer Weight | 11,400 lb. (approx.) |
| Brakes | 12 1/4" x 7 1/2" air brakes |
| Tires | 235 75 R 17.5 radials-18 ply |
| Spec Sheet | Click Here for Spec Sheet |
Click on One Color Choice
-
FREE Colors
Econoline YellowRedBlackJohn Deere GreenKubota OrangeCAT YellowCharcoal Gray -
Upgrade Colors
WhiteFord BlueBrownVolvo Blue
-
Color Pricing
Any Standard Color FREE Any Upgrade Color $750.00 Any Custom Color Request Must Call for Price
Click a Category Below to Add Custom Options
-
Axle/Brake Options
Change a 10 Ton Dual Hub/Wheel Model to SUPER SINGLE 17.5” Hubs (only 4- 17.5” wheels/tires) ($50 Change Fee Only)
Only available on a 10 ton dual tandem axle model. Choose this option if you prefer 4 single hubs with (4) 17.5” wheels/tires, instead of the standard dual hubs with (8) 16” hubs/tires
Only available on a 10 ton dual tandem axle model. Choose this option if you prefer 4 single hubs with (4) 17.5” wheels/tires, instead of the standard dual hubs with (8) 16” hubs/tiresAdd to Cart$50.00
(Deposit: $50.00)
Change a Triple 6,000 lb Axle Model to Triple 7,000 lb Axles ($50 change fee only)
Choose this to upgrade any tri-axle model from standard triple 6k to triple 7k electric brake axles with the same 16” radial wheel/tire size.
Choose this to upgrade any tri-axle model from standard triple 6k to triple 7k electric brake axles with the same 16” radial wheel/tire size.Add to Cart$50.00
(Deposit: $50.00)
Upgrade an Econoline 7 Ton Capacity Tandem Axle Model to 8 Ton Capacity Tandem Axle
This upgrades from tandem 7,000 lb electric brake axles to tandem 8,000 lb electric brake axles, increasing the trailer's GVWR by 2,000 lbs total.
This upgrades from tandem 7,000 lb electric brake axles to tandem 8,000 lb electric brake axles, increasing the trailer's GVWR by 2,000 lbs total.Add to Cart$3,599.00
(Deposit: $3,599.00)
Upgrade Any 10,12 or 15 Ton Model From Standard Electric to Electric/Hydraulic Brakes
Select this to upgrade only a 10, 12 or 15 ton model that is standard with electric drum brakes, to electric over hydraulic drum brakes.
Select this to upgrade only a 10, 12 or 15 ton model that is standard with electric drum brakes, to electric over hydraulic drum brakes.Add to Cart$5,599.00
(Deposit: $5,599.00)
Bed OptionsAdd Bed Length to ANY Deck-over Dovetail or Flatbed Model ($499 Per Foot Added-2' Minimum)
Add length to the overall stationary bed length on any Econoline deck-over dovetail or flatbed model. Must order a minimum of 2 feet. Up to a maximum of 40' total length. Note: May not be available on all models. Add to cart, then change quantity in the cart to the desired number of extra feet.
Add length to the overall stationary bed length on any Econoline deck-over dovetail or flatbed model. Must order a minimum of 2 feet. Up to a maximum of 40' total length. Note: May not be available on all models. Add to cart, then change quantity in the cart to the desired number of extra feet.Add to Cart$499.00
(Deposit: $499.00)
Add Stationary Front Bed Length to ANY Tilt Bed Model ($499 per foot-2' minimum)
Extra length to the tilt bed itself cannot be added. Extra length is added as a stationary front deck. Charge is per linear foot added and must add a minimum of 2'. May not be available on all models. Add item to cart and then update your cart to the total feet of additional stationary front bed desired.
Extra length to the tilt bed itself cannot be added. Extra length is added as a stationary front deck. Charge is per linear foot added and must add a minimum of 2'. May not be available on all models. Add item to cart and then update your cart to the total feet of additional stationary front bed desired.Add to Cart$499.00
(Deposit: $499.00)
D-Ring (Movable) Drops in Standard Stake Pockets (each)
This D-ring is easily movable anywhere using the stake pockets built in the rub rail.
This D-ring is easily movable anywhere using the stake pockets built in the rub rail.Add to Cart$49.00
(Deposit: $49.00)
Diamond Plate Over Wheel Area-Upgrade for Bumper Pull Deckover Models (included standard on all gooseneck models)
Diamond Plate added in deck over wheel area on any size bumper pull deckover model, in lieu of standard wood decking. NOTE: This diamond plate option comes standard on ALL Econoline gooseneck models.
Diamond Plate added in deck over wheel area on any size bumper pull deckover model, in lieu of standard wood decking. NOTE: This diamond plate option comes standard on ALL Econoline gooseneck models.Add to Cart$499.00
(Deposit: $499.00)
Fork Tube Guides (one pair) For Any Non-Deckover Non-Tilt Models
Available on any non-deckover or non-tilt model. Cannot be added on any flatbed deck-over models due to DOT max width allowed by law.
Available on any non-deckover or non-tilt model. Cannot be added on any flatbed deck-over models due to DOT max width allowed by law.Add to Cart$359.00
(Deposit: $359.00)
Platform over Gooseneck (Treadplate Steel 8' x 6')
Available on any gooseneck model
Available on any gooseneck modelAdd to Cart$1,199.00
(Deposit: $1,199.00)
Platform over Gooseneck (Wood Deck 8' x 6')
Add on any goose-neck model
Add on any goose-neck modelAdd to Cart$599.00
(Deposit: $599.00)
Recessed in the Deck HD D-Rings (each)
Per each. Welded on and recessed in deck at your location choice. Add to cart and change quantity in cart to desired amount. Order in increments of 2 if you want same number added on each side.
Per each. Welded on and recessed in deck at your location choice. Add to cart and change quantity in cart to desired amount. Order in increments of 2 if you want same number added on each side.Add to Cart$29.00
(Deposit: $29.00)
Remote Control Power Tilt WIRELESS CONTROLLER UPGRADE (Upgrades from standard cabled controller)
Add on to your separate purchase of the Remote Controlled Power Tilt System sold separately and standard with a 10' cabled remote.
Add on to your separate purchase of the Remote Controlled Power Tilt System sold separately and standard with a 10' cabled remote.Add to Cart$269.00
(Deposit: $269.00)
Remote Controlled Power Tilt System (For Any 5-30 Ton Tilt Bed Models)
12V Remote controlled single cylinder power tilt, includes 12v battery, 10' cabled remote. (Wireless remote upgrade available to purchase separately, if desired).
12V Remote controlled single cylinder power tilt, includes 12v battery, 10' cabled remote. (Wireless remote upgrade available to purchase separately, if desired).Add to Cart$1,999.00
(Deposit: $1,999.00)
Sliding Channel for Sliding Ratchet Straps ($49 PLF) - Must Order Sliding Ratchet/Strap Separately
This channel is only on one side of the trailer running the full length of the bed (less axle area). Sliding ratchets can be moved along the channel to the desired location. Price for sliding channel is pre-calculated x per linear foot of the entire trailer. (You must order desired number of sliding ratchets with strap that are sold separately)
This channel is only on one side of the trailer running the full length of the bed (less axle area). Sliding ratchets can be moved along the channel to the desired location. Price for sliding channel is pre-calculated x per linear foot of the entire trailer. (You must order desired number of sliding ratchets with strap that are sold separately)Add to Cart$1,470.00
(Deposit: $1470)
Sliding Strap Ratchet w/strap (each) Fits on a Sliding Channel (Requires Adding Sliding Channel Separately)
Price is per each ratchet with strap, fits on a sliding channel running the length of trailer (less axle area). Must add sliding channel option separately pre-priced for your trailer bed length. Add sliding ratchet strap to cart and update quantity in cart to total number of sliding ratchets you want.
Price is per each ratchet with strap, fits on a sliding channel running the length of trailer (less axle area). Must add sliding channel option separately pre-priced for your trailer bed length. Add sliding ratchet strap to cart and update quantity in cart to total number of sliding ratchets you want.Add to Cart$39.00
(Deposit: $39.00)
Steps to Climb on Flat Bed Deckover Front-Pair (one step on each side of front bed)
Add steps for stepping up onto trailer bed. Price is for a pair, one step on each side of the bed at front.
Add steps for stepping up onto trailer bed. Price is for a pair, one step on each side of the bed at front.Add to Cart$99.00
(Deposit: $99.00)
Strap Ratchet w/Strap-Stationary (welded on at your location choice) per each
Per each welded on strap ratchet with strap. Placed at your desired location (cannot be installed over axle/wheel area).
Per each welded on strap ratchet with strap. Placed at your desired location (cannot be installed over axle/wheel area).Add to Cart$49.00
(Deposit: $49.00)
Upgrade Any ”Loader Toter” Model from Pine to Oak Decking (Oak is standard on all other models)
ALL Econoline models EXCEPT Loader Toter and Mini Max Series come standard with Oak decking. Choose this option to upgrade any size Loader Toter or Mini Max model to oak decking. Flat charge for any length model.
ALL Econoline models EXCEPT Loader Toter and Mini Max Series come standard with Oak decking. Choose this option to upgrade any size Loader Toter or Mini Max model to oak decking. Flat charge for any length model.Add to Cart$369.00
(Deposit: $369.00)
Upgrade Any Wood Deck Model to Diamond Plate Steel Deck ($79 PLF)
This changes your trailer deck from standard wood to steel. Price calculated per linear foot x length of your trailer.
This changes your trailer deck from standard wood to steel. Price calculated per linear foot x length of your trailer.Add to Cart$2,370.00
(Deposit: $2370)
Welded-On Side HD Stationary D-Rings (each)
Add to cart and change quantity in cart to desired amount (even numbers 2 or more if you want same number on each side)
Add to cart and change quantity in cart to desired amount (even numbers 2 or more if you want same number on each side)Add to Cart$29.00
(Deposit: $29.00)
Winch Steel Mounting Plate Only-Mounted in Front Bed
Steel plate only. Must order winch separately if desired. Mounted centered front of bed.
Steel plate only. Must order winch separately if desired. Mounted centered front of bed.Add to Cart$169.00
(Deposit: $169.00)
WINCH-Add a 12,000 lb Capacity Electric Winch w/ Battery & Includes the Steel Mounting Plate
This includes the steel in bed mounting plate for the winch and the 12k electric winch with battery, installed.
This includes the steel in bed mounting plate for the winch and the 12k electric winch with battery, installed.Add to Cart$1,599.00
(Deposit: $1,599.00)
WINCH-Add a 15,000 lb Capacity Electric Winch w/ Battery & Includes the Steel Mounting Plate
This includes the steel in bed mounting plate for the winch and the 15k electric winch with battery, installed.
This includes the steel in bed mounting plate for the winch and the 15k electric winch with battery, installed.Add to Cart$2,099.00
(Deposit: $2,099.00)
Dovetail OptionsUpgrade Standard Stationary Oak Dovetail to Stationary Steel Self Cleaning Dovetail
Upgrade for any standard wood dovetail model. Helps with tire cleaning and better traction loading and unloading equipment.
Upgrade for any standard wood dovetail model. Helps with tire cleaning and better traction loading and unloading equipment.Add to Cart$449.00
(Deposit: $449.00)
Jacks, Winch OptionsUpgrade from (1) One Single Speed (12k capacity) to (1) One 2-Speed Jack (25k capacity)
This is an upgrade for any trailer standard with one single speed 12,000 lb capacity jack, to one 2-speed 25,000 lb capacity jack.
This is an upgrade for any trailer standard with one single speed 12,000 lb capacity jack, to one 2-speed 25,000 lb capacity jack.Add to Cart$499.00
(Deposit: $499.00)
Upgrade from (1) One to (2) Two Single Speed (12k capacity each) Jacks
This is an upgrade for any trailer standard with one single speed 12,000 lb capacity jack. Adds a second single speed 12,000 lb capacity jack. (Must add tool box shown separately if desired)
This is an upgrade for any trailer standard with one single speed 12,000 lb capacity jack. Adds a second single speed 12,000 lb capacity jack. (Must add tool box shown separately if desired)Add to Cart$299.00
(Deposit: $299.00)
Upgrade from One (1) Single Speed Jack to Two (2) 2-Speed (25k capacity each) Jacks
25,000 lb capacity per each 2 speed jack. This is an upgrade from trailers that come standard with one single speed jack, to two dual (2) 2-speed jacks. (Add tool box shown separately, if desired but not available on tilt bed)
25,000 lb capacity per each 2 speed jack. This is an upgrade from trailers that come standard with one single speed jack, to two dual (2) 2-speed jacks. (Add tool box shown separately, if desired but not available on tilt bed)Add to Cart$659.00
(Deposit: $659.00)
Upgrade From Standard Jack to Dual (2) Hydraulic Jacks (call-available only on some models)
Upgrade is only available on some models. Check with us before ordering.
Upgrade is only available on some models. Check with us before ordering.Add to Cart$2,299.00
(Deposit: $2,299.00)
Upgrade From Standard Manual Single Jack to One Hydraulic Jack (call-available only on some models)
Upgrade is only available on some models. Check with us before ordering.
Upgrade is only available on some models. Check with us before ordering.Add to Cart$1,149.00
(Deposit: $1,149.00)
Winch Steel Mounting Plate Only-Mounted in Front Bed
Steel plate only. Must order winch separately if desired. Mounted centered front of bed.
Steel plate only. Must order winch separately if desired. Mounted centered front of bed.Add to Cart$169.00
(Deposit: $169.00)
WINCH-Add a 12,000 lb Capacity Electric Winch w/ Battery & Includes the Steel Mounting Plate
This includes the steel in bed mounting plate for the winch and the 12k electric winch with battery, installed.
This includes the steel in bed mounting plate for the winch and the 12k electric winch with battery, installed.Add to Cart$1,599.00
(Deposit: $1,599.00)
WINCH-Add a 15,000 lb Capacity Electric Winch w/ Battery & Includes the Steel Mounting Plate
This includes the steel in bed mounting plate for the winch and the 15k electric winch with battery, installed.
This includes the steel in bed mounting plate for the winch and the 15k electric winch with battery, installed.Add to Cart$2,099.00
(Deposit: $2,099.00)
Ramp OptionsAdd a 3rd Standard 5' Load Ramp (Includes Tall Header Modification)
Adds extra standard 5' ladder style load ramp on rear. Also includes a required taller header modification.
Adds extra standard 5' ladder style load ramp on rear. Also includes a required taller header modification.Add to Cart$899.00
(Deposit: $899.00)
Add Extra Length to Any Standard Stand-up Ramps (Per Foot For Pair) (Option to increase dovetail length or not)
Standard ramps are 5' long. Add length by the foot to any standard set of ramps. NOTE” If you want dovetail length t0 match ramp length dovetail will also be longer and flat deck area will be reduced by the extra length of the dovetail. You can add length to ramps and keep 5' dovetail but will need to add stand-up arms to hold ramps upright. Add to cart then change quantity in cart to how extra many feet you want to add to ramps. Price is per foot and includes both ramps.
Standard ramps are 5' long. Add length by the foot to any standard set of ramps. NOTE” If you want dovetail length t0 match ramp length dovetail will also be longer and flat deck area will be reduced by the extra length of the dovetail. You can add length to ramps and keep 5' dovetail but will need to add stand-up arms to hold ramps upright. Add to cart then change quantity in cart to how extra many feet you want to add to ramps. Price is per foot and includes both ramps.Add to Cart$59.00
(Deposit: $59.00)
Add Stand-up Arms to Standard 5' Load Ramps (on Any Dovetail Model)
Price is for arm on both ramps. For any dovetail model with 5' or longer dovetail. These arms are included standard on all Loader Toter models standard with 2' dovetail
Price is for arm on both ramps. For any dovetail model with 5' or longer dovetail. These arms are included standard on all Loader Toter models standard with 2' dovetailAdd to Cart$129.00
(Deposit: $129.00)
Add Steel Tread Plate on Tops of Standard Load Ramps
This will add steel treadplate welded on the top of both the standard ladder style load ramps.
This will add steel treadplate welded on the top of both the standard ladder style load ramps.Add to Cart$169.00
(Deposit: $169.00)
Hydraulic 6' Rear Load Ramps 36” x 72” (Upgrade from Standard Ramps)
This option will allow you to increase the dovetail from standard 5' to 6' and reduce the flat bed deck area by 1' or you can keep just a 5' dovetail because these ramps do not lay down flat. Remote control, electric activated over hydraulic. Available on any model in lieu of standard ramps.
This option will allow you to increase the dovetail from standard 5' to 6' and reduce the flat bed deck area by 1' or you can keep just a 5' dovetail because these ramps do not lay down flat. Remote control, electric activated over hydraulic. Available on any model in lieu of standard ramps.Add to Cart$3,349.00
(Deposit: $3,349.00)
Hydraulic 8' Rear Load Ramps 42” x 96” (Upgrade from Standard Ramps)
This option will allow you to increase the dovetail from standard 5' to 8' and reduce the flat bed deck area by 3' or you can keep just a 5' dovetail because these ramps do not lay down flat. Remote control, electric activated over hydraulic. Available on any model in lieu of standard ramps.
This option will allow you to increase the dovetail from standard 5' to 8' and reduce the flat bed deck area by 3' or you can keep just a 5' dovetail because these ramps do not lay down flat. Remote control, electric activated over hydraulic. Available on any model in lieu of standard ramps.Add to Cart$3,549.00
(Deposit: $3,549.00)
Taper Standard Load Ramps to Knife Edge on Ground End
Price is for both ramps. This puts a tapered edge on ends of standard load ramps for easier roll-up.
Price is for both ramps. This puts a tapered edge on ends of standard load ramps for easier roll-up.Add to Cart$129.00
(Deposit: $129.00)
Upgrade Standard Stand-up 5' Ramps to 6' Deck-Level Super Steel Mega Ramps (increases to 6' Dovetail) 7-12 Ton Models Only
Trailer must be built with a 6' dovetail (instead of standard 5') to upgrade to deck level super solid plate ramps with two-way spring assist. So the standard 5' dovetail is increased to 6', no extra overall trailer length is added. Available only on 7-12 ton models.
Trailer must be built with a 6' dovetail (instead of standard 5') to upgrade to deck level super solid plate ramps with two-way spring assist. So the standard 5' dovetail is increased to 6', no extra overall trailer length is added. Available only on 7-12 ton models.Add to Cart$999.00
(Deposit: $999.00)
Wood Fill Inserts Added on 5' or 6' Standard Ramps w/Tapered Ends (For Pair)
Price is for wood fill on both standard load ramps.
Price is for wood fill on both standard load ramps.Add to Cart$189.00
(Deposit: $189.00)
Tires & WheelsSpare 215 75 R17.5 16 PLY to Fit a TRIPLE AXLE Model
Per each spare wheel & tire
Per each spare wheel & tireAdd to Cart$449.00
(Deposit: $449.00)
Spare 235 75 R17.5 18 PLY to Fit a 17.5” Hub TANDEM AXLE Model
Per each spare wheel & tire
Per each spare wheel & tireAdd to Cart$549.00
(Deposit: $549.00)
Spare 235 80 R16 10 PLY to Fit a Dual Hub Axle
Per each spare wheel & tire
Per each spare wheel & tireAdd to Cart$299.00
(Deposit: $299.00)
Spare 235 80 R16 10 PLY to Fit a Single Hub Axle
Per each spare wheel & tire
Per each spare wheel & tireAdd to Cart$259.00
(Deposit: $259.00)
Spare 235 80 R16 14 PLY to Fit a Dual Hub Axle
Per each spare wheel & tire
Per each spare wheel & tireAdd to Cart$399.00
(Deposit: $399.00)
Spare 235 80 R16 14 PLY to Fit a Single Hub Axle
Per each spare wheel & tire
Per each spare wheel & tireAdd to Cart$379.00
(Deposit: $379.00)
Spare Mount (Bracket Only) for Spare Tire - All Gooseneck Models (Mount Location as Required)
Spare tire mount bracket on any gooseneck model. (Must order correct size spare wheel separately). NOTE: Mounted on top of gooseneck provided no platform deck is ordered. If platform over gooseneck is ordered, spare must hang under gooseneck.
Spare tire mount bracket on any gooseneck model. (Must order correct size spare wheel separately). NOTE: Mounted on top of gooseneck provided no platform deck is ordered. If platform over gooseneck is ordered, spare must hang under gooseneck.Add to Cart$39.00
(Deposit: $39.00)
Spare Mount (Bracket Only) for Spare Tire on Tongue-Bumper Pull (Limited Models)
Not available to use on a single jack model or a model with a tongue tool storage box. Tongue mount bracket on any tag-along bumper pull trailer model mounts the spare laying down flat on the tongue.
Not available to use on a single jack model or a model with a tongue tool storage box. Tongue mount bracket on any tag-along bumper pull trailer model mounts the spare laying down flat on the tongue.Add to Cart$89.00
(Deposit: $89.00)
Spare Tire Mount Bracket Under A Stationary Flatbed Deckover Model
Only available on deckover non-tilt models.
Only available on deckover non-tilt models.Add to Cart$239.00
(Deposit: $239.00)
Spare Tire Stake Pocket Mount Bracket (removable) Cannot Be Used on Deckover Models
Easy mounting for a spare tire on any model with stake pocket sides that is NOT a deck-over. Cannot be used on 102” wide deck-over models due to total trailer width.
Easy mounting for a spare tire on any model with stake pocket sides that is NOT a deck-over. Cannot be used on 102” wide deck-over models due to total trailer width.Add to Cart$99.00
(Deposit: $99.00)
UPGRADE Any Tandem Axle Single Hub 7k Axle Model Standard w/16” 10 Ply Tires to 14 Ply Tires (Upgrades All 4)
Upgrades all 4 tires on a single 8-lug hub 6/7k axle model with 16” wheels to 14 ply tires from the standard 10 ply tires.
Upgrades all 4 tires on a single 8-lug hub 6/7k axle model with 16” wheels to 14 ply tires from the standard 10 ply tires.Add to Cart$489.00
(Deposit: $489.00)
UPGRADE Any TRIPLE Axle Single Hub 7k Axle Model Standard w/16” 10 Ply Tires to 14 Ply Tires (Upgrades All 6)
Upgrades all 6 tires on a single 8-lug hub TRIPLE 6/7k axle model standard with 16” wheels to 14 ply tires from the standard 10 ply tires.
Upgrades all 6 tires on a single 8-lug hub TRIPLE 6/7k axle model standard with 16” wheels to 14 ply tires from the standard 10 ply tires.Add to Cart$749.00
(Deposit: $749.00)
Upgrade Hubs/Tires on Any TANDEM 7-Ton Model From 16” to 17.5” Wheels w/16 Ply Tires
This option will upgrade the hubs/tires on any 7- ton tandem axle model from the standard 16” wheels with 10 ply tires, to 17.5 wheels with 16 ply tires.
This option will upgrade the hubs/tires on any 7- ton tandem axle model from the standard 16” wheels with 10 ply tires, to 17.5 wheels with 16 ply tires.Add to Cart$1,599.00
(Deposit: $1,599.00)
Upgrade Hubs/Tires on Any TRIPLE Axle 9-Ton Model From 16” to 17.5” Wheels w/16 Ply Tires
This option will upgrade the hubs/tires on any triple axle 9 ton model from the standard 16” wheels with 10 ply tires, to 17.5 wheels with 16 ply tires.
This option will upgrade the hubs/tires on any triple axle 9 ton model from the standard 16” wheels with 10 ply tires, to 17.5 wheels with 16 ply tires.Add to Cart$2,099.00
(Deposit: $2,099.00)
Upgrade Tires on Any Dual Tandem 10-12 Ton Model From Standard 16” to Larger 17.5” Wheels w/18 Ply Tires
This option will upgrade the hubs/tires on any 10-12 ton dual tandem axle model from the standard 16” wheels with 10 ply tires, to 17.5 wheels with 18 ply tires.
This option will upgrade the hubs/tires on any 10-12 ton dual tandem axle model from the standard 16” wheels with 10 ply tires, to 17.5 wheels with 18 ply tires.Add to Cart$1,599.00
(Deposit: $1,599.00)
Tongues, Gooseneck and Hitch Options6' Tongue Upgrade (from standard 5')
Longer 6'tongue on bumper pull models. Standard bumper pull tongue is 5'
Longer 6'tongue on bumper pull models. Standard bumper pull tongue is 5'Add to Cart$299.00
(Deposit: $299.00)
7' Tongue Upgrade (from standard 5')
Longer 7' bumper pull tongue (standard bumper pull tongues are 5')
Longer 7' bumper pull tongue (standard bumper pull tongues are 5')Add to Cart$349.00
(Deposit: $349.00)
Goose-neck Storage Toolbox w/Locking Lid-Between Uprights (mounts higher on tilt bed models)
Add this to any goose-neck Econoline trailer, mounted between the front uprights. NOTE If added on a tilt bed model, tool box must be mounted a little higher in order to clear the tilt bed release arm.
Add this to any goose-neck Econoline trailer, mounted between the front uprights. NOTE If added on a tilt bed model, tool box must be mounted a little higher in order to clear the tilt bed release arm.Add to Cart$399.00
(Deposit: $399.00)
Height Added to Standard Gooseneck Uprights (per 6” increment)
If you require additional height on standard gooseneck. Price is per six (6) inches of extra height needed. Example: You need 6” taller, add quantity of 1 to cart. You need 12” taller, add quantity of 2 to cart.
If you require additional height on standard gooseneck. Price is per six (6) inches of extra height needed. Example: You need 6” taller, add quantity of 1 to cart. You need 12” taller, add quantity of 2 to cart.Add to Cart$59.00
(Deposit: $59.00)
Kingpin on Standard Gooseneck (Upgrade from Standard Gooseneck Ball Coupler)
This upgrades a standard goosneck from a ball coupler to a Kingpin coupler
This upgrades a standard goosneck from a ball coupler to a Kingpin couplerAdd to Cart$379.00
(Deposit: $379.00)
Platform over Gooseneck (Treadplate Steel 8' x 6')
Available on any gooseneck model
Available on any gooseneck modelAdd to Cart$1,199.00
(Deposit: $1,199.00)
Platform over Gooseneck (Wood Deck 8' x 6')
Add on any goose-neck model
Add on any goose-neck modelAdd to Cart$599.00
(Deposit: $599.00)
Tongue Chain Storage with Locking Lid (Add to Bumper Pull Models)
Add this tongue storage with locking lid onto any bumper pull model. Has expanded metal bottom.
Add this tongue storage with locking lid onto any bumper pull model. Has expanded metal bottom.Add to Cart$159.00
(Deposit: $159.00)
Upgrade Any 14 or 15 Ton BUMPER PULL Model to HD Goose-neck Stem w/3” Bull Dog Coupler (Required on any 14 or 15 Ton GN Model)
Choose this REQUIRED heavy duty upgrade only for a 14 ton or 15 ton GVWR bumper pull model. IMPORTANT NOTE: A goose-neck stem upgrade option cannot be added to any model over 15 ton. This goose-neck stem coupler requires the HD 3” ball. (Add a storage box separately if desired, but front tool box cannot be added on tilt bed models)
Choose this REQUIRED heavy duty upgrade only for a 14 ton or 15 ton GVWR bumper pull model. IMPORTANT NOTE: A goose-neck stem upgrade option cannot be added to any model over 15 ton. This goose-neck stem coupler requires the HD 3” ball. (Add a storage box separately if desired, but front tool box cannot be added on tilt bed models)Add to Cart$3,199.00
(Deposit: $3,199.00)
Upgrade Any 7-12 Ton Bumper Pull Trailer to a Standard 2-5/16” Goose-neck Ball Stem
Choose this to upgrade from a bumper pull to a standard goose-neck 2-5/16” ball stem on any 7-12 ton model. NOTE: A 14 ton and a 15 ton model requires the HD 3” goose-neck upgrade option. IMPORTANT NOTICE: Models OVER 15 ton require the 5th wheel drop deck coupler (18 wheeler type) option. (Purchase tool box separately and tool box available on non-tilt bed models only)
Choose this to upgrade from a bumper pull to a standard goose-neck 2-5/16” ball stem on any 7-12 ton model. NOTE: A 14 ton and a 15 ton model requires the HD 3” goose-neck upgrade option. IMPORTANT NOTICE: Models OVER 15 ton require the 5th wheel drop deck coupler (18 wheeler type) option. (Purchase tool box separately and tool box available on non-tilt bed models only)Add to Cart$999.00
(Deposit: $999.00)
Toolbox Options4' Locking Toolbox (24”x48”) Mounted Under Bed (ea) For 102” Wide Flatbed Deckover or Partial Tilt Bed Models ONLY
Not available on tilt bed models, EXCEPT can be mounted under the partial stationary front deck portion on a tilt bed model, if stationary deck is 5' or longer. Price is per each 24” x 48” box mounted in your location choice. Add to cart then change cart to desired quantity of boxes. Box locks but is not built to be fully moisture proof.
Not available on tilt bed models, EXCEPT can be mounted under the partial stationary front deck portion on a tilt bed model, if stationary deck is 5' or longer. Price is per each 24” x 48” box mounted in your location choice. Add to cart then change cart to desired quantity of boxes. Box locks but is not built to be fully moisture proof.Add to Cart$499.00
(Deposit: $449.00)
Goose-neck Storage Toolbox w/Locking Lid-Between Uprights (mounts higher on tilt bed models)
Add this to any goose-neck Econoline trailer, mounted between the front uprights. NOTE If added on a tilt bed model, tool box must be mounted a little higher in order to clear the tilt bed release arm.
Add this to any goose-neck Econoline trailer, mounted between the front uprights. NOTE If added on a tilt bed model, tool box must be mounted a little higher in order to clear the tilt bed release arm.Add to Cart$399.00
(Deposit: $399.00)
Tongue Chain Storage with Locking Lid (Add to Bumper Pull Models)
Add this tongue storage with locking lid onto any bumper pull model. Has expanded metal bottom.
Add this tongue storage with locking lid onto any bumper pull model. Has expanded metal bottom.Add to Cart$159.00
(Deposit: $159.00)
