10' Lippert Girard GG750 Series ”Cassette” Style Deluxe Awning w/12V Built-in Power & LED Light Strip (Requires Adding At Least 12” Extra Trailer Height )

NOTE: Awning length MUST be at least 2' shorter than whatever trailer length you are ordering.  If trailer you are ordering has a standard height side door, you must add at least 12” extra height to the trailer, even more extra height if adding height to a standard side door, so as to accommodate this awning installation. *This Awning Features Include: Lightweight, compact, lateral-arm awning. No upright legs to contend with. 12V powered w/built-in 12v battery. Fully enclosed awning in cassette for protection from weather. Full 8’ projection (on all sizes 10’ and up). Your choice of Black or White framework, comes ONLY with BLACK woven polyester fabric. Has a 12V built-in motor and 12V LED light strip.

12' Lippert Girard GG750 Series ”Cassette” Style Deluxe Awning w/12V Built-in Power & LED Light Strip (Requires Adding At Least 12” Extra Trailer Height )

NOTE: Awning length MUST be at least 2' shorter than whatever trailer length you are ordering.  If trailer you are ordering has a standard height side door, you must add at least 12” extra height to the trailer, even more extra height if adding height to a standard side door, so as to accommodate this awning installation. *This Awning Features Include: Lightweight, compact, lateral-arm awning. No upright legs to contend with. 12V powered w/built-in 12v battery. Fully enclosed awning in cassette for protection from weather. Full 8’ projection (on all sizes 10’ and up). Your choice of Black or White framework, comes ONLY with BLACK woven polyester fabric. Has a 12V built-in motor and 12V LED light strip.

14' Lippert Girard GG750 Series ”Cassette” Style Deluxe Awning w/12V Built-in Power & LED Light Strip (Requires Adding At Least 12” Extra Trailer Height )

NOTE: Awning length MUST be at least 2' shorter than whatever trailer length you are ordering.  If trailer you are ordering has a standard height side door, you must add at least 12” extra height to the trailer, even more extra height if adding height to a standard side door, so as to accommodate this awning installation. *This Awning Features Include: Lightweight, compact, lateral-arm awning. No upright legs to contend with. 12V powered w/built-in 12v battery. Fully enclosed awning in cassette for protection from weather. Full 8’ projection (on all sizes 10’ and up). Your choice of Black or White framework, comes ONLY with BLACK woven polyester fabric. Has a 12V built-in motor and 12V LED light strip.

16' Lippert Girard GG750 Series ”Cassette” Style Deluxe Awning w/12V Built-in Power & LED Light Strip (Requires Adding At Least 12” Extra Trailer Height )

NOTE: Awning length MUST be at least 2' shorter than whatever trailer length you are ordering.  If trailer you are ordering has a standard height side door, you must add at least 12” extra height to the trailer, even more extra height if adding height to a standard side door, so as to accommodate this awning installation. *This Awning Features Include: Lightweight, compact, lateral-arm awning. No upright legs to contend with. 12V powered w/built-in 12v battery. Fully enclosed awning in cassette for protection from weather. Full 8’ projection (on all sizes 10’ and up). Your choice of Black or White framework, comes ONLY with BLACK woven polyester fabric. Has a 12V built-in motor and 12V LED light strip.

18' Lippert Girard GG750 Series ”Cassette” Style Deluxe Awning w/12V Built-in Power & LED Light Strip (Requires Adding At Least 12” Extra Trailer Height )

NOTE: Awning length MUST be at least 2' shorter than whatever trailer length you are ordering.  If trailer you are ordering has a standard height side door, you must add at least 12” extra height to the trailer, even more extra height if adding height to a standard side door, so as to accommodate this awning installation. *This Awning Features Include: Lightweight, compact, lateral-arm awning. No upright legs to contend with. 12V powered w/built-in 12v battery. Fully enclosed awning in cassette for protection from weather. Full 8’ projection (on all sizes 10’ and up). Your choice of Black or White framework, comes ONLY with BLACK woven polyester fabric. Has a 12V built-in motor and 12V LED light strip.

20' Lippert Girard GG750 Series ”Cassette” Style Deluxe Awning w/12V Built-in Power & LED Light Strip (Requires Adding At Least 12” Extra Trailer Height )

NOTE: Awning length MUST be at least 2' shorter than whatever trailer length you are ordering.  If trailer you are ordering has a standard height side door, you must add at least 12” extra height to the trailer, even more extra height if adding height to a standard side door, so as to accommodate this awning installation. *This Awning Features Include: Lightweight, compact, lateral-arm awning. No upright legs to contend with. 12V powered w/built-in 12v battery. Fully enclosed awning in cassette for protection from weather. Full 8’ projection (on all sizes 10’ and up). Your choice of Black or White framework, comes ONLY with BLACK woven polyester fabric. Has a 12V built-in motor and 12V LED light strip.

STAGE-10' Wide-w/36” Railing, Steps, Folds Out/Up w/Electric Winch (Available only on 7',8',8.5' Wide Tandem or Triple Axle Models) *Requires minimum 7' inside height

NOTE: Standard stage comes with uncovered 3/4” plywood floor deck. (unless you also purchase covered interior walls and then stage will be covered). If NOT ordering covered interior walls, adding ATP or black rubber on stage is an available option. Trailer must be a tandem or triple axle and trailer ordered with a stage must be at least 4' longer than the stage width you order. This option adds a drop down stage that is 8' wide and as tall as possible based on your trailer height. Minimum inside trailer height of 7' is required for a stage option to be added. Includes the stage drop down side, 36” fold-down railing, electric winch with 12v marine battery for raising and lowering stage, set of stage jack legs and steps.

STAGE-12' Wide-w/36” Railing, Steps, Folds Out/Up w/Electric Winch (Available only on 7',8',8.5' Wide Tandem or Triple Axle Models) *Requires minimum 7' inside height

NOTE: Standard stage comes with uncovered 3/4” plywood floor deck. (unless you also purchase covered interior walls and then stage will be covered). If NOT ordering covered interior walls, adding ATP or black rubber on stage is an available option. Trailer must be a tandem or triple axle and trailer ordered with a stage must be at least 4' longer than the stage width you order. This option adds a drop down stage that is 8' wide and as tall as possible based on your trailer height. Minimum inside trailer height of 7' is required for a stage option to be added. Includes the stage drop down side, 36” fold-down railing, electric winch with 12v marine battery for raising and lowering stage, set of stage jack legs and steps.

STAGE-14' Wide-w/36” Railing, Steps, Folds Out/Up w/Electric Winch (Available only on 7',8',8.5' Wide Tandem or Triple Axle Models) *Requires minimum 7' inside height

NOTE: Standard stage comes with uncovered 3/4” plywood floor deck. (unless you also purchase covered interior walls and then stage will be covered). If NOT ordering covered interior walls, adding ATP or black rubber on stage is an available option. Trailer must be a tandem or triple axle and trailer ordered with a stage must be at least 4' longer than the stage width you order. This option adds a drop down stage that is 8' wide and as tall as possible based on your trailer height. Minimum inside trailer height of 7' is required for a stage option to be added. Includes the stage drop down side, 36” fold-down railing, electric winch with 12v marine battery for raising and lowering stage, set of stage jack legs and steps.

STAGE-16' Wide-w/36” Railing, Steps, Folds Out/Up w/Electric Winch (Available only on 7',8',8.5' Wide Tandem or Triple Axle Models) *Requires minimum 7' inside height

NOTE: Standard stage comes with uncovered 3/4” plywood floor deck. (unless you also purchase covered interior walls and then stage will be covered). If NOT ordering covered interior walls, adding ATP or black rubber on stage is an available option. Trailer must be a tandem or triple axle and trailer ordered with a stage must be at least 4' longer than the stage width you order. This option adds a drop down stage that is 8' wide and as tall as possible based on your trailer height. Minimum inside trailer height of 7' is required for a stage option to be added. Includes the stage drop down side, 36” fold-down railing, electric winch with 12v marine battery for raising and lowering stage, set of stage jack legs and steps.

STAGE-8' Wide-w/36” Railing, Steps, Folds Out/Up w/Electric Winch (Available only on 7',8',8.5' Wide Tandem or Triple Axle Models) *Requires minimum 7' inside height

NOTE: Standard stage comes with uncovered 3/4” plywood floor deck. (unless you also purchase covered interior walls and then stage will be covered). If NOT ordering covered interior walls, adding ATP or black rubber on stage is an available option. Trailer must be a tandem or triple axle and trailer ordered with a stage must be at least 4' longer than the stage width you order. This option adds a drop down stage that is 8' wide and as tall as possible based on your trailer height. Minimum inside trailer height of 7' is required for a stage option to be added. Includes the stage drop down side, 36” fold-down railing, electric winch with 12v marine battery for raising and lowering stage, set of stage jack legs and steps.

Stage-Deck Floor Covered in ATP or Black Rubber ($40 per foot of stage width)

NOTE: Stage comes with uncovered, 3/4” plywood deck floor standard. If ordering a stage, and you are NOT also ordering covered interior walls on your entire trailer (stage would be covered in the wall covering you order because stage is part of the wall), if you want the stage deck floor to be covered in aluminum treadplate (ATP) or in black rubber, add this option and change quantity in your cart to the width stage you are ordering. Price is per foot x the width of the stage you order.

Add Electric Brakes on Standard Single 3500 lb Idler (No Brake) Drop Leaf Spring Axle Model

Add electric brakes and safety breakaway on a 5 lug 3500 lb single axle model standard with no brakes, upgrades to 7 pin wiring harness (Electric brake controller required on your tow vehicle)

Change Any 7' Wide ONLY Single Axle Model to ”Narrow Track” Axle w/Inside Fender Wells

Add this option for any weight capacity or type axle on any single 7' wide model. (Not available on any other widths). Will have a minimal trim area around wheels on outside of trailer.

Change Any 7' Wide ONLY Tandem Axle Model to ”Narrow Track” Axles w/Inside Fender Wells

Add this option for any weight capacity or type axle on any tandem axle 7' wide model. (Not available on any other widths). Will have a minimal trim area only around wheels on outside of trailer.

Change from Standard Single or Tandem Drop Leaf Spring Axle to Straight Leaf Spring Axle (Change Fee)

NOTE: Will add build lead time for these special order axles. All models come standard with drop leaf spring axles. Changing to straight axles will raise the trailer bottom up about 3-1/2”  to 4” higher off the ground.

Upgrade Tandem Axle to Spread (California) Style (8.5 wide torsion axles only)

Upgrade any tandem axle model to ”spread axle” design. Only available to use with torsion axles, must purchase torsion axles of your choice separately.

Upgrade to 5200 lb. Single Axle Hydraulic Surge Brakes from 3500 Idler Leaf Spring

Upgrades from a no brake 3500 lb idler axle to the 5200 lb surge brake single axle. Also upgrades to 6 lug larger wheel

Upgrade to Hydraulic Brakes on 3500 lb. Torsion Tandem Axle from 3500 lb. Leaf Spring Tandem Axles

Upgrade to Hydraulic Surge Brakes on 3500 lb. Tandem Leaf Spring Axles

Upgrades any tandem model standard with 3500 lb electric brakes to surge brakes

Upgrade to Hydraulic Surge Brakes on Any 3500 lb. Single Axle w/No Brakes

This adds surge brakes to a standard non-brake 3500 lb idler (no brake) single axle model.

Upgrade to Hydraulic Surge Brakes with 5200 lb. Tandem Leaf Spring Axles from Tandem 3500 lb. Leaf Spring Axles

Upgrades axle capacity and from electric to surge brakes. Also upgrades to 6 lug larger wheels

Upgrade to Hydraulic Surge Brakes with 5200 lb. Tandem Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrades any model standard with 5200 lb electric brake drop leaf axles to torsion axles and surge brakes.

Upgrade to Hydraulic Surge Brakes with 7000 lb. Tandem Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Upgrades any tandem model with standard 3500 lb axles. Also upgrades wheels to 16”.

Upgrade to Hydraulic Surge Brakes with 7000 lb. Tandem Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrade any standard 5200 lb drop leaf axle model with electric brakes to 7000 lb torsion axles with surge brakes. Also upgrades to larger 8 lug 16” wheels

Upgrade to Single 3500 lb. Torsion Axle from Standard Single 3500 lb. Leaf Spring Axle (No Brakes)

Upgrades from leaf spring to torsion axle, but does not add brakes. No brakes

Upgrade to Single 3500 lb. Torsion Axle w/Brakes from Standard Single 3500 lb. Leaf Spring Idler (No Brake) Axle

Upgrades from standard 5 lug drop leaf no brake single axle to 5 lug torsion single axle with electric brakes and safety breakaway, 7 pin wiring plug.

Upgrade to Single 5200 lb. Leaf Spring Axle w/Brakes from Single 3500 lb. Leaf Spring Idler Axle

Also adds electric brakes and safety breakaway, 7 pin wiring plug. (Electric brake controller required on your tow vehicle). Larger 6 lug wheels

Upgrade to Single 5200 lb. Torsion Axle w/ Brakes from Single 3500 lb. Leaf Spring Idler Axle

Also adds electric brakes and safety breakaway and larger 6 lug wheels, 7 pn wiring plug. (Requires electric brake controller on your tow vehicle)

Upgrade to Tandem 3500 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring

Upgrades any standard tandem axle model with 3500 lb drop leaf standard axles

Upgrade to Tandem 5200 lb. Leaf Spring Axles from Tandem 3500 lb. Axles

Also adds larger 6 lug 15” wheels & tires

Upgrade to Tandem 5200 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring

Upgrades from standard tandem 3500 lb leaf spring axles to 5200 lb tandem torsion axles with 6 lug 15” wheels w/larger tire.

Upgrade to Tandem 5200 lb. Torsion Axles from Tandem 5200 lb Leaf Spring Axles

Upgrades any model standard with 5200 lb axles from the standard leaf spring to torsion axles (6 lug)

Upgrade to Tandem 7000 lb. Leaf Spring Axles from Tandem 3500 lb. Axles (also upgrades coupler & jack)

Also upgrades to 15K Coupler and 5K Tongue Jack and 16” 8 lug wheels

Upgrade to Tandem 7000 lb. Leaf Spring Axles from Tandem 5200 lb. Axles

Upgrade for any model standard with 5200 lb leaf spring axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 16” 8 lug wheels/tires.

Upgrade to Tandem 7000 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

This upgrade also includes a 15K Coupler and 5K Tongue Jack. Also upgrades to 8 lug 16” wheels

Upgrade to Tandem 7000 lb. Torsion Axles from Tandem 5200 lb. Leaf Spring

Upgrades any model with 5200 lb drop leaf standard axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 16” 8 lug wheels.

Upgrade to Tandem 7000 lb. Torsion Axles from Tandem 5200 lb. Torsion Axles

Upgrades any model with 5200 lb torsion axles to 7000 lb torsion axles. Upgrades to larger 16” 8 lug wheels.

Upgrade to Tandem 8000 lb. Leaf Spring Oil Bath Axles (17.5 Wheels) from Tandem 3500 lb. Axles

Also upgrades to 15K Coupler and 5K Tongue Jack and 17.5” wheels

Upgrade to Tandem 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) from Tandem 3500 lb. Leaf Spring Axles

This upgrade also includes a 15K Coupler and 5K Tongue Jack. Also upgrades to larger 17.5” wheels.

Upgrade to Tandem 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) from Tandem 5200 lb. Leaf Spring

Upgrades any model standard with 5200 lb drop leaf axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 17.5” wheel

Upgrade to Triple 3500 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Upgrade to Triple 5200 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Also upgrades to larger 6 lug wheels

Upgrade to Triple 5200 lb. Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrade to Triple 7000 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Also upgrades to larger 8 lug wheels and 16” tires, 15k coupler, 5k jack

Upgrade to Triple 7000 lb. Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Also upgrades to larger 8 lug 16” wheels, 15k coupler and 5k jack.

Upgrade to Triple 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) from Tandem 5200 lb. Leaf Spring Axles

Also upgrades to larger 17.5” wheels, 15k coupler and 5k jack.

Upgrade to Triple 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) From Triple 5200 lb. Torsion Axles

Upgrades any model standard with triple 5200 lb torsion axles to 8000 lb triple torsion oil bath axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 17.5” wheel

Upgrade to Triple 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) From Triple 7000 lb. Torsion Axles w/16” Wheels

Upgrades any model standard with triple 7000 lb torsion axles (16” wheels) to 8000 lb triple oil bath torsion axles (17.5” wheels). Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 17.5” wheels.

Upgrade Triple Axle to Spread (California) Style (8.5 wide torsion axles only)

Add this after upgrading a tandem axle to triple torsion axles, to upgrade to the  ”spread axle” design. Only available to use with torsion axles, must purchase triple torsion axles of your choice separately.

Upgarde Gooseneck to Triple 5200 lb Torsion Axles From Tandem 5200 lb Torsion Axles

Upgrade to triple 5200 lb torsion axles for any gooseneck model standard with tandem 5200 lb torsion axles.

Upgarde Gooseneck to Triple 7000 lb Torsion Axles From Tandem 5200 lb Torsion Axles

Upgrade to triple 7000 lb torsion axles for any gooseneck model standard with tandem 5200 lb torsion axles. Also upgrades to larger 8 lug 16” wheels.

Upgarde Gooseneck to Triple 7000 lb Torsion Axles From Triple 5200 lb Torsion Axles

Upgrade to triple 7000 lb torsion axles for any gooseneck model standard with triple 5200 lb torsion axles. Also upgrades to larger 8 lug 16” wheels.

Upgrade Gooseneck to Tandem 7000 lb. Torsion Axles from 5200 lb. Torsion Axles

Upgrade for any gooseneck model standard with 5200 lb tandem torsion axles.  Also upgrades to larger 16” 8 lug wheels/tires.

Upgrade GOOSENECK to Tandem 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) from Tandem 5200 lb. Torsion Axles

Upgrades any gooseneck model standard with 5200 lb torsion axles. Upgrades to larger 17.5” wheel

Upgrade GOOSENECK to Triple 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) from Tandem 5200 lb. Torsion Axles

Also upgrades to larger 17.5” wheels.

Upgrade GOOSENECK to Triple 8000 lb. Torsion Oil Bath Axles (17.5 Wheels) From Triple 5200 lb. Torsion Axles (Copy)

Upgrades any gooseneck model standard with triple 5200 lb torsion axles to 8000 lb triple torsion oil bath axles. Upgrades to larger 17.5” wheel

Upgrade Tandem Axle to Spread (California) Style (8.5 wide torsion axles only)

Upgrade any tandem axle model to ”spread axle” design. Only available to use with torsion axles, must purchase torsion axles of your choice separately.

Upgrade Triple Axle to Spread (California) Style (8.5 wide torsion axles only)

Add this after upgrading a tandem axle to triple torsion axles, to upgrade to the  ”spread axle” design. Only available to use with torsion axles, must purchase triple torsion axles of your choice separately.

18” Deep Overhead Cabinet w/Doors-Your Choice Length-($99 per Foot) Min 2'

Choose this item and add as many straight feet to your cart that you want.  (Minimum purchase 2'). You can choose the location. (Upper L purchase also required if in corner). Cabinets are metal in any of the standard colors or mill (aluminum) finish, your choice.

24” Deep Base Cabinet w/Doors-Your Choice Length-($115 per Foot) Min 2'

Choose this item and add as many straight feet to your cart that you want.  (Minimum purchase 2'). You can choose the location. (Base L purchase also required if in corner). Cabinets are metal in any of the standard colors or mill (aluminum) finish, your choice.

Cabinets Set Over Tandem Axle Model Wheel Well Box (8.5 Wide Only)

This option will add built in metal cabinets with locking doors and inside shelves on top of a wheel well box, either side. Note: If you want on both sides must order two sets.

Cabinets Set Over TRIPLE Axle Model Wheel Well Box (8.5 Wide Only)

This option will add built in metal cabinets with locking doors and inside shelves on top of a wheel well box, either side. Note: If you want on both sides must order two sets. (Shown over triple axle model in pic)

Closet-1/2 Height

Sits over a base cabinet that must be added separately of at least 2'.

Closet-Full Height

Approximately 2' wide. Normally added on next to a base and overhead cabinet which must be purchased separately.

L Bottom Base Cabinet (To Go Around Front Corner)

Must purchase this option if you want to L turn bottom base cabinets around a front corner. Example: If you want base cabinet across an 8' wide model, add 7' base cabinets and add this L base cabinet to turn the corner.  Add more base cabinets by the foot if you want more down the side wall.

L Upper Cabinet (To Go Around Front Corner)

Must purchase this option if you want to L turn upper cabinets around a front corner. Example: If you want upper cabinet across an 8' wide model, add 7' upper cabinets and add this L cabinet to turn the corner.  Add more upper cabinets by the foot if you want more down the side wall.

Loft/Shelf Front Storage On 2-Car Stacker Models ONLY (Per Foot of Depth Across Full Width)

Choose this to add a custom plywood loft/shelf on welded framework across the front wall of any 2-car stacker model trailer. Price is by the foot. Add to cart then change quantity to how many feet long you want the loft/shelf to extend back from the front of the trailer. Normally can be 3' to 6' long depending on the length trailer you order.

Stereo System With Flip-Up Stereo and Six (6) Speakers (requires upper cabinet purchase)

Must purchase upper cabinets and stereo will be mounted in cabinets which must be purchased separately.

Tool Box (4-Drawers) 24” Wide ADDED into 2' of Base Cabinet (Cabinets Sold Separately)

You can choose this tool box option to be installed in 2' of base cabinet space. You must order at least 2' of base cabinet to have this 4-drawer tool box inside the 2' of base cabinet space.

4' Long x 3' Tall Concession DOOR w/Window w/Screen

Door with slider glass & screen.

5' Long x 3' Tall Concession DOOR w/Window w/Screen

Door with slider glass & screen, your placement choice.

5' Long x 4' Tall Concession DOOR w/Window w/Screen

Door with slider glass & screen.

6' Long x 3' Tall Concession DOOR w/Window w/Screen

Door with slider glass & screen, your placement choice.

6' Long x 4' Tall Concession DOOR w/Window w/Screen

Door with slider glass & screen.

8' Long x 3' Tall Concession DOOR w/Window w/Screen

Door with slider glass & screen.

8' Long x 4' Tall Concession DOOR w/Window w/Screen

Door with window and screen.

12' Long x 5' Tall Concession Door

Longest available concession door only. This door is built by Anvil Trailer factory in-house.

4' Long x 3' Tall Concession Door

On gas shocks, with locks.

5' Long x 3' Tall Concession Door

5' Long x 4' Tall Concession Door

6' Long x 3' Tall Concession Door

6' Long x 4' Tall Concession Door

8' Long x 3' Tall Concession Door

8' Long x 4' Tall Concession Door

Metal Covered Work Table on Metal Legs (Per Foot)

Your choice 12”, 18” or 24” deep, aluminum covered 3/4 plywood w/metal trim, work table on aluminum legs, free standing in your location choice. Add to your cart then update quantity to desired total feet of table. List depth desired in checkout notes. (Minimum order of 4 ')

Shadow Box in Trailer Side (Aluminum Finish) *Requires Concession Door of Same Size

Adds a shadow box display or to hold outside TV, etc. Order this shadow box and must also order the size concession door that you want the size of the shadow box to be. Example: 6' long x 4' tall shadow box requires purchase of 6' long x 4' tall concession door to cover it.

Shadow Box in Trailer Side (Plywood Finish) *Requires Concession Door of Same Size

Adds a shadow box display or to hold outside TV, etc. Order this shadow box and must also order the size concession door that you want the size of the shadow box to be. Example: 6' long x 4' tall shadow box requires purchase of 6' long x 4' tall concession door to cover it.

Shelf (Fold-down) on Wall w/ 2” Lip Edge (12”-24” Deep) Per Foot

3/4” plywood shelving, 12” to 24” (your choice) deep trimmed with front lip edge, covered in metal. Attached to wall on fold-down brackets in your designated location. Add to cart, then change quantity in cart to the desired length of shelving.  Price is per foot, minimum order of  4'.

Shelf (Stationary) on Wall w/ 2” Lip Edge (12”-24” Deep) Per Foot

3/4” plywood shelving, 12” to 24” (your choice) deep trimmed with front lip edge, covered in metal. Attached and braced to wall in your designated location. Add to cart, then change quantity in cart to the desired length of shelving.  Price is per foot, minimum order of  4'.

Shelf-Concession Serving/Prep Fold-Down 12” Deep Shelf ($40 per foot of shelf)

For exterior use under a concession serving door/window. For interior use under concession door or any other interior wall location. Mounted to wall on folding brackets. Add to cart then change cart to how many total feet of shelf desired. Example: You order a 6' long concession door, order 6' of shelf to go outside (or inside) under the concession door.

3/8” Plywood Finish Partition Wall (8' Long or Shorter)

Must purchase a walk thru door separately if desired. Wall can be placed at your chosen inside location.

4' Aluminum Race Flap on Ramp Door (8.5 Wide Models Only) *Includes Double Spring Assist on Ramp Door

Available only on 8.5 wide models. Upgrades from standard 16”plywood flap to 4' all aluminum flap.

Add 24” Walk Thru Door W/ Flush Key Lock in Partition Wall

Choose this to add a 24” wide walk through door in a partition wall

Add 32” Walk Thru Door w/ Flush Key Lock in Partition Wall

Choose this to add a 32” wide walk through door in a partition wall.

Add 36” Walk Thru Door w/Flush Key Lock in Partition Wall

Choose this to add a 36” wide walk through door in a partition wall

Aluminum Covered Partition Wall (8' Long or Shorter)

Any standard color metal over plywood wall. (Must purchase a walk through door separately if desired)

Cabinets Set Over Tandem Axle Model Wheel Well Box (8.5 Wide Only)

This option will add built in metal cabinets with locking doors and inside shelves on top of a wheel well box, either side. Note: If you want on both sides must order two sets.

Cabinets Set Over TRIPLE Axle Model Wheel Well Box (8.5 Wide Only)

This option will add built in metal cabinets with locking doors and inside shelves on top of a wheel well box, either side. Note: If you want on both sides must order two sets. (Shown over triple axle model in pic)

Motorcycle Deluxe Hauler Package (Any 5' Wide Single Axle Model)

Ready to Go-5' Wide Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, alloy mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 6' Wide Single Axle Model)

Ready to Go-6' Wide Single Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, alloy mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 6' Wide Tandem Axle Model)

Ready to Go-6' Wide Tandem Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, alloy mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 7' Wide Single Axle Model)

Ready to Go-7' Wide Single Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, alloy mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 7' Wide Tandem Axle Model)

Ready to Go-7' Wide Tandem Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, allow mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 8.5' Wide Tandem Axle Model 26' to 32' Long)

Ready to Go-8.5' Wide Tandem Axle 26' to 32' Long. Package Includes: Pair rear stabilizer jacks, 2 extra  Floor D-Rings, Removable wheel chock, alloy mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 8.5' Wide Tandem Axle Model Up to 24' Long)

Ready to Go-8.5' Wide Tandem Axle Up to 24' Long. Package Includes: Pair rear stabilizer jacks, 2 extra Floor D-Rings, Removable wheel chock, alloy mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 8' Wide Tandem Axle Model)

Ready to Go-8' Wide Tandem Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, alloy mag 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Pro Series Professional UPGRADE to Any 6' or 7' Wide SINGLE AXLE Anvil Elite V Model (Any Length)

Add this Pro Series upgrade package to any standard single axle 6' or 7' wide Anvil trailer you are ordering. This Pro Series single axle upgrade package includes the following items added to the standard features on a single axle standard Anvil Elite model: 16” on center floor cross members, 16” on center roof cross bows, interior spare mount bracket, standard steel spare wheel, rounded ”bull-nose” V front with smooth anodized front corners, steel skid plates under rear corner posts, 12” tall 3/4” plywood kickplate protecting bottom of inside walls, bar lock for padlock on side door, 5” LED strip 12v dome light centered in ceiling, heaviest .080 PolyCore exterior (up to 7'6” inside height-taller requires ATP sides and rear upgrade purchase), 4- floor D-rings in corners, increased six (6) year factory limited warranty ILO standard 5 year.

Pro Series Professional UPGRADE to Any 6' or 7' Wide TANDEM AXLE Anvil Elite V Model (Any Length)

Add this Pro Series upgrade package to any standard Tandem axle 6' or 7' wide Anvil trailer you are ordering. This Pro Series tandem axle upgrade package includes the following items added to the standard features on a 6' or 7' wide tandem axle standard Anvil Elite model:  16” on center roof cross bows, interior spare mount bracket, standard steel spare wheel, rounded ”bull-nose” V front with smooth anodized front corners, steel skid plates under rear corner posts, 12” tall 3/4” plywood kickplate protecting bottom of inside walls, bar lock for padlock on side door, 5” LED strip 12v dome light centered in ceiling, heaviest .080 PolyCore exterior (up to 7'6” inside height-taller requires ATP sides and rear upgrade purchase), 4- floor D-rings in corners, increased six (6) year factory limited warranty ILO standard 5 year.

Pro Series Professional UPGRADE to Any 8' or 8.5' Wide TANDEM AXLE Anvil Elite V Model (Any Length Up to 34')

Add this Pro Series upgrade package to any standard Tandem axle 8' or 8.5' wide Anvil trailer you are ordering. This Pro Series tandem axle upgrade package includes the following items added to the standard features on a 8' or 8.5' wide tandem axle standard Anvil Elite model:  16” on center roof cross bows, interior spare mount bracket, standard steel spare wheel, rounded ”bull-nose” V front with smooth anodized front corners, steel skid plates under rear corner posts, 12” tall 3/4” plywood kickplate protecting bottom of inside walls, bar lock for padlock on side door, 5” LED strip 12v dome light centered in ceiling, heaviest .080 PolyCore exterior (up to 7'6” inside height-taller requires ATP sides and rear upgrade purchase), 4- floor D-rings in corners, increased six (6) year factory limited warranty ILO standard 5 year.

Race Basic Set-Up Complete Package For 8.5' x 20' or 24' (V-Nose or Flat Front Models)

Package includes: Upgrade to 5200 drop leaf spring axles with electric brakes, 6 lug wheels, 15” radials. Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, in any standard free color, aluminum interior walls, ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Race Basic Set-Up Complete Package For 8.5' x 26' or 28' (V-Nose or Flat Front Models)

Package includes: Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, in any standard free color, aluminum interior walls, ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Race Custom Set-Up Complete Package For 8.5' x 20' or 24' (Flat Front Models Only)

Package includes: Upgrade to 5200 drop leaf spring axles with electric brakes, 6 lug wheels, 15” radials. Cast front corners w/anodized insert cap and  larger 4” top trim. Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, in any standard free color, aluminum interior walls, ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Race Custom Set-Up Complete Package For 8.5' x 26' or 28' (Flat Front Models Only)

Package includes: Cast front corners w/anodized insert cap and  larger 4” top trim. Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, in any standard free color, aluminum interior walls, ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Stereo System With Flip-Up Stereo and Six (6) Speakers (requires upper cabinet purchase)

Must purchase upper cabinets and stereo will be mounted in cabinets which must be purchased separately.

10' Half Wall Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

This converts rear space of trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

10' Open Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

12' Open Porch W/12” on center cross members and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

14' Open Porch W/12” on center cross members and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

16' Open Porch W/12” on center cross members and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

36” Tall Railing On 12' or Longer Open Porch W/36” Gate Door

Purchase this to add railing and a walk thru gate on any separate open rear porch you order, on 12' long or longer porch.

36” Tall Railing On Up to a 10' Open Porch W/36” Gate Door

Purchase this to add railing and a walk thru gate on any separate open rear porch you order, up to 10' long open porch.

4' Half Wall Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

4' Open Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

5' Slide-in Rear-Aluminum Load Ramps on Hybrid Models (ILO 4' Expanded Metal Steel Ramp Gate)

If you want 5' aluminum slide-in load ramps instead of the standard 4' tall expanded metal steel load ramp rear gate on any hybrid model.

6' Half Wall Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

6' Open Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

8' Half Wall Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

8' Open Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. Must purchase side rails separately if desired. NOTE: Porches available on tandem axle models only. Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

Double 8” Main Frame Upgrade (required purchase on all rear porch models) $40 PLF

This is a required option on all trailer sizes with a back porch custom build purchase. Price is calculated at per linear foot x the length of the overall trailer you are ordering, not just the back porch size, because the entire trailer frame must be double 8”. to support the rear porch.

Hybrid Open Rear Deck Conversion -7',8' or 8.5' Wide Models Any Length Up to 24' Long

This option converts from enclosed to open deck on any 7', 8', 8.5' wide model up to 24' long. Choose your trailer length up to 24', then add this option to convert your choice length on the rear to an open deck with a steel expanded metal (mesh) ramp load gate. Floor is 3/4 plywood. Double barn rear locking doors on enclosed area are included. (Note: Upgrade to 2” x 6” board floor on open deck as a separate purchase, if desired)

Hybrid Open Rear Deck Conversion-8.5' Wide Models 26' Long and Longer

For 8.5 wide trailer models  26' or longer'. Add this option to convert your choice length on the rear to an open deck with a steel expanded metal (nesh) ramp load gate. Floor is 3/4 plywood. (Upgrade to 2x6 board deck separately).Double barn rear locking doors on enclosed area are included if desired or can be a solid rear wall. (Note: Upgrade to 2” x 6” board floor on open deck as a separate purchase  if desired)

Upgrade Rear Porch or Hybrid Open Rear Deck to 2” x 6” Treated Boards ILO Standard Plywood ($22 Per Foot of Deck)

Add this if you also purchase either a rear porch or the Hybrid open rear deck conversion option and want to upgrade from the standard 3/4” plywood deck to 2” x 6” treated board deck on the open section. (Note: Can also be upgraded on inside section if desired. Add to cart, then change quantity to how many feet long your open deck or porch area will be.

12” x 12” Aluminum Utility Door (Fuel Door)

Your location choice. Locking door.

36” x 24” Generator Door Only W/Vent (Small)

Your choice location. Access door only.

36” x 34” Larger (Standard) Generator Door Only W/Vent (Included on Inside Gen. Prep Package)

This door accommodates most generators but you are responsible for checking your size match. It can be purchased separately here, or it is included standard if you purchase the Inside Generator Prep Package.

36” x 36” Baggage Access Door

Your location choice. Locking door.

40” x 32” Generator Door Only W/Vent (Largest)

This is the largest generator door offered. Your choice location. Door only.

48” x 36” Baggage Access Door

Your location choice. Locking door.

54” x 48” Escape Door W/RV Style Flushlock

Your placement. Generally used with 8.5 wide models, normally installed low over fender wells on driver side.

Access Door 12” x 12” (with key lock)

Add this to any trailer side location.

Baggage Access Door 36” x 24” (with key lock)

Add this baggage access door anywhere in the side of the trailer.

Generator Prep Package (Outside On Tongue-Flat Front Only) Includes 60” Triple Tube Extended Tongue

Must have a flat front on trailer. Will noy fit on any V-nose model. Includes: ATP covered aluminum frame Generator Box, that completely lifts off the ATP over plywood base, the extended  60”  Triple Tube Tongue. You specify size of box needed to fit your generator. Normal is approx 36” x 36”.

Generator Prep Package (Outside On Tongue-Flat Front Only) Includes 72” Triple Tube Extended Tongue

Must have a flat front on trailer. Will not fit on any V-nose model. Includes: ATP covered aluminum frame Generator Box, that completely lifts off the ATP over plywood base, the extended  60”  Triple Tube Tongue. You specify size of box needed to fit your generator. Normal is approx 36” x 36”.

Generator Prep Pkg (Inside Trailer) With Vented Door and Slide-out Tray

Includes: 36” x 34” Generator Access Door w/vent, Interior Plywood Compartment 36”x36” to store generator, and the Generator Slider Tray for you to easily access generator after mounted.

36” Ramp Door Flap W/ ATP Supports and 3” Bumpers and Double Spring Assist on Ramp Door

Upgrades from standard 16” flap and adds double spring assist on ramp door.

4' Aluminum Race Flap on Ramp Door (8.5 Wide Models Only) *Includes Double Spring Assist on Ramp Door

Available only on 8.5 wide models. Upgrades from standard 16”plywood flap to 4' all aluminum flap.

4' Ramp Door In V-Nose W/ 2' Extended V-Nose

Includes longer V-nose required for door

4' Ramp Door On Side of Trailer

Placed in your choice location

5' Ramp Door in V-Nose W/ Extra Extended V-Nose and 110” Draw Bars

Has longer V nose and extended tongue to fit door in V

5' Ramp Door On Side of Trailer

Placed in your choice location.

Add 24” Side Door W/ RV Style Flushlock

Usually added on a 5 wide that doesn't come standard with a side door, but can be added to any width model, your location  choice.

Add 32” Side Door W/ RV Style Flushlock

This adds an extra 32” door, your location choice

Add 32” x 68” RV Door W/Screen and Window

Requires model with at least 75” (6'3”) inside height. Adding the complete door unit, not upgrading.

Add 36” Side Door W/RV Style Flushlock

This adds an extra door, your placement choice.

Add 36” x 78” RV Door W/Screen and Window

Requires at  least 84” (7') Inside height. Adding the complete door unit, not upgrading.

Add 48” Side Door W/RV Style Flushlock

This adds an extra door to any model, your location choice

Add 48” x 78” RV Door W/Screen and Window

Requires minimum 84” (7') Inside Height. Adding the complete door unit, not upgrading.

Add a 60” x 78” Double Side Door (Limited Models)

This is an extra door purchase

Add a 72” x 78” Double Side Door

This adds a new door, your location choice

Add a Barlock On Any Side Door for padlock

Adds a swing away bar lock to any side door. All models with side doors come standard with a RV style flush key lock only.

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models Over 7' Inside Height)

For any width model with ”over” 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models up to 7' Inside Height)

For any width model up to 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

ATP or Black RTP, Black Rubber Coin, B & W Vinyl on Rear Ramp Door and Flap

Your choice of black & white checkered vinyl, aluminum tread plate or black rubber tread plate or black rubber coin covering on the rear ramp door and ground end flap. Any width trailer. Indicate your selection in your checkout notes section.

Barn Door Hinges-Add EXTRA BARN Swing Door Hinges (per extra pair)

Choose this to ADD extra barn door hinges on any model you are ordering with barn swing rear doors. All width models with barn swing doors come standard with TWO (2) hinges on each of the double barn door. (Except 4' wide only available with single swing barn door).  Price is per one pair of extra barn door hinges added, Ordering one (1) pair adds one extra hinge on each barn swing door.

Barn Swing Doors on Rear In Lieu of Standard Ramp Rear Door ($20 Change Fee Only)

CHANGE FEE ONLY. All models 5' to 8.5' wide come standard with the ramp rear door. Add this option to your cart if you want double barn swing rear doors instead of the standard ramp door. Note: 4' wide models are standard with one swing barn rear door. This is a change only for any 5' 6', 7', 8, 8.5 wide model from the standard ramp door to double barn doors with bar lock.

Double 3/4” Plywood on Rear Ramp Door (standard height models) *Recommend adding dbl spring asst)

Double the 3/4” plywood on the rear ramp door on any standard height model. Makes rear door heavier. On 8' or 8.5 wide models it is highly recommended to also add the double spring assist on the ramp door. (Double spring assist not available on models smaller than 8' wide)

Double Spring Assist On Ramp Door-8' or 8.5' Wide Models Only (Required on all with 24” Extra Height or Taller)

Only available on 8' or 8.5' wide models. Makes raising and lowering ramp door easier and safer. Required on any 8' wide or 8.5' wide trailer that has 24” or more extra height added. NOTE: This double spring assist comes standard on the 7,000 lb super duty ramp door upgrade.

Ramp Door Hinges-Add EXTRA Ramp Door Hinges (each)

Choose this to ADD extra rear ramp door hinges on any width model. All 5' and 6' wide models with a ramp rear door come standard with TWO (2) hinges on the ramp door. All 7' wide models come standard with THREE (3) hinges on rear ramp door. All 8' and 8.5' wide models come standard with FOUR (4) hinges on the ramp door. Add quantity in cart for how many EXTRA hinges you desire. Price is per each hinge added.

Ramp Door Support for Deck; Fold-Down, Adjustable Height Jacks On Ramp Door (pair)

Add this option to any ramp rear door to add fold down jacks on the rear exterior of the ramp door allowing you to use ramp door as a rear deck. Screw adjustable.

Ramp Door Upgrade on Any 4' Wide Anvil Model (must also add at least 24” Extra height)

Anvil 4' wide models are standard with a single swing rear door. To upgrade a 4' wide model to a ramp rear door you must also add at least 2' (24”) extra height to have a functional ramp rear door.

RAMPS (Slide-in) Aluminum 5' Load Ramps (for models with barn swing rear doors) One Pair

If ordering a trailer with barn swing rear doors, add this ramp option for a pair of 5' aluminum slide-in load ramps to for roll-up loading. Mounted on side behind rear axle.

Rear Ramp Door Winch w/12V Battery (Highly Recommended If Ramp Door Height Needed is Over 8')

Ramp doors come standard up to an 8'6'' inside height trailer, (ramp door opening will be about 8'). This is as tall as any standard ramp door can go, unless you want to extend the ramp door opening height taller, then you will need to add this door winch because the door is too heavy to raise & lower manually. Winch is ceiling mounted with cable that hooks to ramp door. Comes with 12V battery.

Refrigeration Strips on Ramp Door

Clear strips. Add on any ramp door opening to help keep cold (or warm) air inside with ramp door open.

Refrigeration Strips on Side Door

Add on any side door. Clear walk through strips for use to keep cool air in with door open.

RV Style Pull-Out Aluminum ”Thinline” DELUXE 48” Wide Step Under any Side Door

Installs under any side door. This is an all-aluminum, manual pull-out step. It's only available in 48” width and it is much thinner in design than is the basic steel step and does not reduce ground clearance under trailer as much as the basic steel step. (Recommended if you travel un-even terrain or driveways.)

RV Style Pull-Out Steel Step Under any Side Door (Basic)

Installs under any side door. This is a basic steel, manual pull-out step. It hangs down under trailer frame and will reduce ground clearance under trailer. NOT recommended if you travel over un-even terrain or driveways. (See the all-aluminum thinline step as an alternative.)

Side Door Extra 10” Height-6' or 7' Wide Models (Requires adding at least 9” extra height to trailer)

Side door height is 68” on 6' and 7' wide standard height models. If adding at least 9” extra height to your trailer and you want the side door to be 10” taller to 78”, add this option.

Side Door Extra 6” Height-6' or 7' Wide Models (Requires adding at least 6”extra height to trailer)

Side door height is 68” on 6' and 7' wide standard height models. If adding at least 6”extra height to your trailer and you want the side door to be 6” taller to 74”, add this option.

Side Door Extra 6” Height-8' or 8.5' Wide Models (Requires adding at least 6” extra trailer height)

Standard height on side door is 78” on all 8' or 8.5' wide models. If you are adding at least 6” extra height to your trailer and want to increase the side door height to the maximum of 84”, add this option.

Steel Transition Flap to cover Ramp Door Hinges (door to floor)

Helps with smoother roll over from ramp door to trailer floor area.

Upgrade 8' or 8.5 Wide to Super Duty Ramp Door (7000 lb. Capacity) Includes Double Spring Assist-Center Jacks)

Upgrades from standard ramp door and comes with the required double spring assist. (Available only on 8' or 8.5 wide models). Includes pair of drop leg jack stands on center sides of door.

Upgrade from Standard 32” Side Door to 36” Side Door

Upgrade any trailer size with standard 32” side door to a 36” side door

Upgrade from Standard 32” Side Door to 48” Side Door

Must be able to fit space on trailer length you select. Upgrade a trailer with standard 32” side door to a 48” side door

Upgrade from Standard 36” Side Door to 48” Side Door

Upgrade any trailer size with standard 36” side door to a 48” side door

Upgrade to 3/4” Pressure Treated Plywood on a Ramp Door-Any Width

In Lieu of Standard non-pressure treated 3/4” Plywood on a ramp door, any width.

Upgrade to 32” x 68” RV Door W/Screen and Window

Upgrades from any model with a  standard 32” side door.

Upgrade to 36” x 78” RV Door W/Screen and Window

Requires minimum 84” (7') Inside Height. Upgrades from any model with a standard 32” or 36” side door

Upgrade to 48” Ramp Door Flap W/ ATP Supports and 3” Bumpers and Double Spring Assist on Ramp Door

Upgrade from standard 16” wood flap on ramp door

Upgrade to 48” x 78” RV Door W/Screen and Window

Requires minimum 84” (7') inside height. Upgrades from any standard 32” or 36” size side door

Upgrade to 60” x 78” Double Side Door In Lieu of Standard Door

This upgrades from any size standard side door

Upgrade to 72” x 78” Double Side Door In Lieu of Standard Side Door (Limited Models)

NOTE: Will only fit on trailer that is long enough for the door. Upgrade from any size standard side door

Upgrade to EXTRA WIDE 95-1/2” Rear Ramp Door Opening (8.5 Wide Models Only)

Select this option to have the rear framework modified to make the rear ramp door opening the maximum width of approximately 95-1/2” which is  about 4” wider than the standard 91-1/2” width. For 8.5 wide models only.

UPGRADE to HD Aluminum Door Hold-Backs on Barn Doors or Side Door (price per each hold-back)

NOTE: NOT AVAILABLE IN BLACK SO ON A BLACKOUT TRIM WILL BE ALUMINUM. Barn rear door models and all side doors come with plastic door hold-backs standard. You can upgrade to heavier duty aluminum door hold-backs. (2 required for barn rear doors, 1 required for any side door). Price is per each hold-back. Change to correct quantity in cart before checking out.

Upgrade to Heavy Duty Ramp Door w/flap (4500 lb. Capacity) 7' or 8' Wide Only

Upgrade a 7' or 8' wide model from standard 2,000 lb capacity ramp door to heavy duty 4,500 lb capacity ramp door w/16” flip flap on ground end.  (this door comes included as standard on all 8.5 wide models)

Upgrade to Longer V-Nose w/Extra Longer” Triple Tube Tongue, 4' Ramp Door in V

From standard V nose this option upgrades to longer V nose, (very pointed) with a 4' ramp door in the V-nose, includes upgrade to extra long extended triple tube tongue. For 7' wide or wider models only.

Upgrade to Steel 16” Ramp Door Ground End Flap ILO Standard 16” Plywood Flap (Any Ramp Door Model)

This will upgrade the flip flap on the ground end of any ramp door from the standard 16” plywood flap to a steel 16” flap.

'Recessed 12V Battery Storage Compartment (6” or 8” Frame Models Only)

Add this if you also purchase a 12V battery for inside 12V power and want to recess the battery in the floor. Only available to install in a 6” or 8” mainframe model.

110 Volt 15 AMP Wall Receptacle

Add per each receptacle. Not wired unless you also purchase a breaker box or electrical package with breaker box

110 Volt 20 Amp Recepts (Each)

Add extra wall 20 AMP recepticle

110 Volt GFI Recepts (Interior or Exterior)

Add per each receptacle. Your choice placement. Not wired unless breaker box or electric package is also purchased.

110 Volt to 12 Volt Converter 45 Amp DC

Must purchase any electrical package or breaker panel box separately.

110 Volt Wall Switch

110V Wire Stubbed Out Only-For Your Item Install (each stub)

Choose this to have a 110V wire stubbed out to your inside location for your later installation of your 110V item.

12 Volt LED Angled Surface Mount Exterior Light

Your choice outside placement. (Must add 12V power supply separately if desired)

12 Volt LED Porch Light

Installed outside near side door, with switch

12 Volt LED Rear Loading Light (each) Includes One Switch

Per each LED loading light mounted outside top. Recommend minimum of two. Price includes one switch for all lights ordered. Update desired quantity in cart

12 Volt Wall Switch

Add if you also want a wall switch to operate inside dome light that comes standard with switch on the light. Your placement choice.

125 AMP Electric Panel Box Only W/Lifeline and Cable Hatch

Add this for electrical service. Your placement choice inside trailer. Includes HD 50 AMP Lifeline Chord and plug, with double 110V service into the panel box.

12V LED Flat Light 24” Long x 6” Wide Interior Light

This is available in 12V only. Installed at your location choice in trailer. Purchase 12V battery power supply separately if desired.

12v LED Strip Light (interior) 8' Long x 1” Wide (each)

Add desired quantity into cart.

12v Light Wiring All Encased in Plastic Loom Tubing ($20 PLF)

If you want all 12v light wiring to be encased in protective plastic loom covering, add this option. Price is calculated per linear foot x length of any trailer you are ordering.

12V Power Supply On Board (Includes 12v Deep Cycle Marine Battery in Vented Box)

Add this to have 12V power supply wired to whatever 12V items you choose. Battery will trickle charge when trailer is plugged to vehicle. Installed inside trailer in a vented box

12V Wire Stubbed Out Only-For Your Item Install (each stub)

Choose this to have a 12V wire stubbed out to your inside location for your later installation of your 12V item.

15 AMP Exterior Motor Base Plug (3-Prong) With One-15 AMP Interior Wall Outlet

Plug a standard 3-prong extension cord into the exterior motor base plug on outside front of trailer, with one 15 AMP wall outlet inside the trailer for 110V power.

220 Volt Interior Recepts (Must give correct configuration of plug) Requires 125 AMP Panel

You must provide us the plug configuration style you require. Price for one plug. Not wired unless you purchase the 125 AMP panel box service to provide 220.

30 AMP Electric Panel Box Only W/Lifeline and Cable Hatch (not usable with an A/C)

Can not be used on models that have an A/C unit added. (Must buy minimum 50 AMP service). Add this for electrical service. Your placement choice inside trailer.

30 Amp Motor Base Plug (Exterior Connector)

If you want to plug shore power into panel box from the outside. Adding this plug will change to a loose shoreline cord if ordering  a panel box or electric package. Not wired and no cord, unless you purchase an electric breaker panel box or electrical package.

4' Fluorescent LED Lights (Each)

LED light. Note: Two of these lights are included in all electrical packages. Not wired unless you also purchase at least the electric panel box.

50 AMP Electric Panel Box Only W/Lifeline and Cable Hatch

Add this for electrical service. Your placement choice inside trailer. Includes HD 50 AMP Lifeline Chord with 50 AMP Plug, floor drop hatch for cable.

50 Amp Lifeline Cord ONLY (25' long) (Loose)

50 Amp Motor Base Plug (Exterior Connector)

If you want to plug shore power into panel box from the outside. Adding this plug will change to a loose shoreline cord if ordering  a panel box or electric package. Not wired and no cord, unless you purchase an electric breaker panel box or electrical package.

Additional 12 Volt LED Interior Dome Light (each)

Add an additional LED 12V  inside dome light. (All trailers come standard with one regular non-LED dome light)

Converter-Converts 110v AC Power to 12v DC Power

Add this converter if you want to run any 12v items with power initiated from 110v power supply, like a generator or a power plugin. Must add 110v electrical service separately if desired.

Dedicated 20 AMP 110v Breaker

Add this for any electrical outlet or item you are purchasing and want it to be wired on it's own dedicated breaker in the panel box. This is for the dedicated breaker only, electrical panel box, outlet, etc are purchased separately. (A/C units come standard on a dedicated breaker included in A/C price)

Electric 4500# Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer. Includes 12V electric 4500 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Electric 6000# HD Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer with at least 5200 lb axles. Includes 12V electric 6000 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Extra 12V LED Side Clearance Lights-Top or Bottom (Your Choice Location)

Must purchase in multiple of 2 (one in same location on each side). Add as many extra clearance lights to sides of any width model. Can be added to top or bottom of trailer sides. Tell us your requested locations in your checkout notes.

Extra Electric Cable Floor Drop Thru Hatch

Add this if you need an additional floor drop hatch for electric cable. Your location choice.

Generator Prep Package (Outside On Tongue-Flat Front Only) Includes 60” Triple Tube Extended Tongue

Must have a flat front on trailer. Will noy fit on any V-nose model. Includes: ATP covered aluminum frame Generator Box, that completely lifts off the ATP over plywood base, the extended  60”  Triple Tube Tongue. You specify size of box needed to fit your generator. Normal is approx 36” x 36”.

Generator Prep Package (Outside On Tongue-Flat Front Only) Includes 72” Triple Tube Extended Tongue

Must have a flat front on trailer. Will not fit on any V-nose model. Includes: ATP covered aluminum frame Generator Box, that completely lifts off the ATP over plywood base, the extended  60”  Triple Tube Tongue. You specify size of box needed to fit your generator. Normal is approx 36” x 36”.

Generator Prep Pkg (Inside Trailer) With Vented Door and Slide-out Tray

Includes: 36” x 34” Generator Access Door w/vent, Interior Plywood Compartment 36”x36” to store generator, and the Generator Slider Tray for you to easily access generator after mounted.

INVERTER-2000 Watt-Inverts 12v DC Power to 110v AC Power

Add this 2000 watt Inverter if you want to run a larger amount of 110v items with power initiated from 12v battery power supply (sold separately). Must add 110v electrical items or package separately if desired.

INVERTER-750 Watt-Inverts 12v DC Power to 110v AC Power

Add this 750 watt Inverter if you want to run a small amount of110v items with power initiated from 12v battery power supply (sold separately). Must add 110v electrical items or package separately if desired.

Stereo System With Flip-Up Stereo and Six (6) Speakers (requires upper cabinet purchase)

Must purchase upper cabinets and stereo will be mounted in cabinets which must be purchased separately.

Upgrade Any Single Axle Model from Standard 4 pin flat to 7 pin Round Wiring Harness/Plug Only

A 7 pin wiring harness/plug is required on any trailer if adding back up lights. (This harness/plug is standard on all models with electric brakes).

Upgrade to 110 Volt 20 Amp Recept In Lieu of Standard 15 Amp included in an Electrical Package

When you purchase any electrical package. This is an upgrade charge to upgrade the two standard 15 AMP receptacles included in an electric package to 20 AMP

Upgrade to LED 12 Volt Dome Light from Standard Dome Light

All models come with one non-LED dome light. This upgrades the included standard dome light to an LED dome light

Winch Box Only (Steel) Recessed in Floor (6” or 8” Main Frame Models Only)

Winch box is recessed in floor at your choice location, normally centered in front of any trailer. Must add winch as separate purchase if desired.

15 AMP Exterior Motor Base Plug (3-Prong) With One-15 AMP Interior Wall Outlet

Plug a standard 3-prong extension cord into the exterior motor base plug on outside front of trailer, with one 15 AMP wall outlet inside the trailer for 110V power.

30 Amp Motor Base Plug (Exterior Connector)

If you want to plug shore power into panel box from the outside. Adding this plug will change to a loose shoreline cord if ordering  a panel box or electric package. Not wired and no cord, unless you purchase an electric breaker panel box or electrical package.

50 Amp Motor Base Plug (Exterior Connector)

If you want to plug shore power into panel box from the outside. Adding this plug will change to a loose shoreline cord if ordering  a panel box or electric package. Not wired and no cord, unless you purchase an electric breaker panel box or electrical package.

Complete 110 Volt 125 AMP ”Super Duty” Electrical Package w/LED Lights (required for 220V Outlet)

Includes: Panel Box with two 110 legs wired coming into panel box, with the HD 50 AMP shoreline cord and plug on 25' Lifeline Chord, with Floor Cable Hatch to drop lifeline out, (2) 110 Volt Interior Wall Recepts, and (2) 4' LED Fluorescent Lights W/ Light Switch.

Complete 110 Volt 30 AMP ”Light Duty” Electrical Package w/LED Lights

Includes: Electrical Panel Box with a 30 AMP plug lifeline shore power cable, & floor cable hatch to drop lifeline out, (2) 110 Volt Interior Wall Recepts, and (2) 4' LED Fluorescent Lights W/Light Switch.

Complete 110 Volt 50 AMP ”Heavy Duty” Electrical Package w/LED Lights *required with A/C

*NOTE: The 50 AMP service is required if adding an air conditioner. Package Includes: Electrical Panel Box with a 50 AMP plug on 25' HD lifeline shore power cable, & floor cable hatch to drop lifeline out, (2) 110 Volt Interior Wall Recepts, and (2) 4' LED Fluorescent Lights W/Light Switch.

12 Volt LED Porch Light

Installed outside near side door, with switch

12 Volt LED Rear Loading Light (each) Includes One Switch

Per each LED loading light mounted outside top. Recommend minimum of two. Price includes one switch for all lights ordered. Update desired quantity in cart

12v Light Wiring All Encased in Plastic Loom Tubing ($20 PLF)

If you want all 12v light wiring to be encased in protective plastic loom covering, add this option. Price is calculated per linear foot x length of any trailer you are ordering.

Back-Up Lights (LED) One Pair

Note: Only available on models standard with electric brakes and 7 pin wiring harness or you much also purchase a 7 pin harness upgrade separately.

Dual Tail-Lights (LED) (Pair)

Adds an extra set of rear LED tail lights to any model.

Extra 12V LED Side Clearance Lights-Top or Bottom (Your Choice Location)

Must purchase in multiple of 2 (one in same location on each side). Add as many extra clearance lights to sides of any width model. Can be added to top or bottom of trailer sides. Tell us your requested locations in your checkout notes.

Side Turn Blinker Lights (Pair)-Come Standard on 26' & Longer

For any model, mounted on sides. Adds more visibility of trailer when turning. Included standard on 26' and longer models.

Upgrade Any Single Axle Model from Standard 4 pin flat to 7 pin Round Wiring Harness/Plug Only

A 7 pin wiring harness/plug is required on any trailer if adding back up lights. (This harness/plug is standard on all models with electric brakes).

100 lb. Propane Tank Aluminum Holding Cage ONLY (Each)

Cage only. Tongue mounted or rear mounted as shown. (Two cages pictured as example)

24” Tall Anodized (Smooth) Aluminum Down Sides and Across Rear ($19 per linear foot)

Adds to any width model. calculated at x per foot length of trailer

24” Tall ATP Down Sides and Across Rear ($20 per linear foot)

Adds to any width trailer. Calculated at x length of trailer.

24” Tall Colored Metal Down Sides and Across Rear ($19 per linear foot)

Your choice any of the 6 standard free colors. Calculated at per foot  x length of any trailer

Anodized (Smooth) Metal or ATP Metal to Rear Corners

All models come standard with front corner ATP. Add this vertical rear corner trim to any width trailer. Specify your choice anodized or ATP in your checkout notes.

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models Over 7' Inside Height)

For any width model with ”over” 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models up to 7' Inside Height)

For any width model up to 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

Cast Aluminum Front and Rear Corners w/Anodized Insert Front ”Racing” Cap (Flat Front 8.5 Wide Only)

Only available on flat front 8.5 wide models

Cover Tongue Area in Steel Treadplate (Requires Flat Front or Extended Tongue on a V-Nose Model)

For a generator or other equipment mounting area. Flat front models, or on V-nose models you must add the upgrade to either a 60” or 72” extended tongue, depending on how much depth you need on tongue plate.

Cover Tongue Area w/3/4” Plywood and ATP (Requires Flat Front or Extended Tongue on a V-Nose Model)

For a generator or other equipment mounting area. Flat front models, or on V-nose models you must add the upgrade to an extended tongue.

Flat Front In Lieu of Standard V-Nose Front ($20 Change Fee Only)

V-Nose front with the ATP nose & corner plate is standard on all models. Add this change option to convert your trailer to a flat nose front with aluminum corners instead of the standard V-Nose front. This is a change fee only.

Full Blackout Trim Package (With any Color Side Metal)

For any size model. Includes: Black Trim, Black ATP Stoneguard, Black ATP Up V-Nose, Smooth Black Fenders, Black Screws, and Black Steel Wheels. Can be used with black or any other color side metal you choose. (On RV Door/Screen upgrades door trim will be aluminum finish, not available in black)

Harley Davidson Decals 3 Set Total (Each Side and Rear)

Can be used on one color or two color combo trailer. Decals available in black/orange or black/silver, your choice.

Platform (Steel) Mounted Across Tongue For After-Market Generator, etc (Requires Flat Front or Extended Tongue on V-Nose Model)

Steel mounting platform across the tongue for mounting your generator or other equipment. Built to your specified size provided there is enough room on the tongue. Must be a flat front model or must add an extended tongue to allow room as needed.

Red and White DOT Reflector Tape ($6 Per Linear Foot)

Installed on side bottom rail. Calculated at x total linear foot of any width trailer. Note: Standard on all 26' or longer models.

Slant Top Roof Upgrade on a V-Nose Model

By slanting the roof top down on  V-nose, it assists in aerodynamics of air flow over trailer.

Upgrade Any Single Axle Model to ATP Fenders

Upgrades a single axle model from standard smooth aluminum to aluminum tread plate (ATP) fenders.

Upgrade Any Tandem Axle Model to ATP Fenders

Upgrades any tandem axle model from standard smooth aluminum to aluminum tread plate (ATP) fenders. (fender skirts on 8' & 8.5' models)

Upgrade Gooseneck Model From Flat to V-Nose Front

Upgrade from the standard flat front to a V-nose front on any gooseneck model

Upgrade to 3” Bottom Trim In Lieu of Standard 2” Trim ($10 per linear foot)

Calculated per foot x length of trailer. Note: This 3” bottom trim size comes standard on all 8.5 wide models.

Upgrade to 4' Tall ATP Rock Guard ILO 24” Standard (Straight Across or Angle Cut)

Upgrade from standard  2' tall Aluminum Tread Plate (ATP) rock guard to 4' tall rock guard. (Can be angle cut if requested).

Upgrade to Black ATP Stoneguard, Front Corners, Nose Plate Only (24” High) on Front (Flat Front or V-Nose)

Instead of aluminum ATP. V-nose or flat front model. (If V-nose model you must also purchase black vertical nose plate upgrade to match, if desired)

Upgrade to Riveted Exterior Metal (ILO Semi-Screw-less) ($30 Per Linear Foot)

Exterior metal is riveted (not semi-screwed) at every joining metal seam (approx every 4')  then hi-tech adhesive is used to attach metal to all other wall posts. Calculated per foot x length of trailer.

Upgrade to Smooth Screw-less Exterior ($25 Per Linear Foot) *No Warranty

Upgrades from the standard semi-screw less to fully screw less. Exterior metal is attached to sides only using a hi-tech adhesive between metal onto all wall posts. Calculated per foot x length of any width trailer. NOT recommended in extremely hot or cold geographic areas. If you choose this screwless option, be aware there is NO warranty against metal detaching at any time. The factory does NOT warrant or guarantee the exterior screwless metal to stay adhered.

Upgrade to TAPERED (wedge) Front V on Any 7', 8', 8.5' Wide BUMPER PULL Model UP TO 24' Long (Includes the Required 60” Extended Triple Tube Tongue)

Upgrade 7', 8', 8.5' wide up to 24' long, to a tapered (wedge style) front V section from the standard pointed V-nose on bumper pull model. Incudes the required 60” extended triple tube tongue option to accommodate the wedge front.

Upgrade to TAPERED (wedge) Front V on Any 8.5' Wide BUMPER PULL Model 26' or LONGER (Includes the Required 60” Extended Triple Tube Tongue)

Upgrade any 8.5' wide 26' or longer model, to a tapered (wedge style) front V section from the standard pointed V-nose on bumper pull model. Incudes the required 60” extended triple tube tongue option to accommodate the wedge front.

Upgrade to TAPERED (wedge) Front V on Any Gooseneck Model

Upgrade to a tapered (wedge style) front V section from the standard flat front on a gooseneck model.

V-Nose Rounded ILO Standard Pointed V-Nose (Any Size)

Choose this to have the front V rounded instead of the standard straight to a point V nose.

Wing Rear Top w/3-LED Exterior Lights/Switch (Any Width Model)-See Note on Rear Door Heights

Add this custom rear wing on any width model. NOTE: All Anvil models with a ramp rear door, the ramp door height is always 6” shorter than whatever inside height you are ordering. With this wing top rear option added, if you choose double rear barn doors, the rear door header height is 12” shorter than inside height so the barn doors can swing open and clear the wing top sides.

12” Tall 3/4” Plywood Kickplate on Walls ($14 per linear foot)

Adds a 12” high 3/4” plywood kick plate on walls. Calculated at per foot x length of trailer, any width model.

12” Tall ATP or Black RTP Kickplate on Walls ($20 per linear foot)

Adds a 12” high interior walls kick plate in either aluminum, or black rubber tread plate. Calculated at per foot x length of trailer, any width model. Specify choice in checkout notes.

18” Wide ATP Tire Runners (Pair) Aluminum ($20 per linear foot)

Aluminum tread plate. One each side (pair). Calculated at per foot x length of trailer. 8.5 wide models.

24” Tall 3/4” Plywood Kickplate on Walls ($18 per linear foot)

Adds a 24” high kick plate of 3/4” layer of plywood. Calculated at per foot x length of trailer, any width model.

24” Tall ATP or Black RTP Kickplate on Walls ($25 per linear foot)

Adds a 24” high kick plate of either aluminum tread plate, or black rubber tread plate. Calculated at per foot x length of trailer, any width model. Specify choice in checkout notes.

24” Wide ATP Tire Runners (Pair) Aluminum ($24 per linear foot)

Aluminum tread plate. Includes one each side (pair). Calculated per foot x length of trailer. 8.5 wide models.

Aluminum (extruded) Floor Deck (BEST OFFERED) Any Width Model ($135 PLF)

The entire floor deck of trailer will be constructed of all extruded aluminum, no plywood. This is a high-quality, long-lasting deck ideal for race cars, food service, etc. Price is calculated per linear foot x length of any width Anvil trailer model.

Aluminum Tread Plate Flooring ($38 per linear foot)

Aluminum tread plate floor. Calculated at per foot x length of trailer. Any width. (purchase E-track in photo separately, if desired). Does not include ATP on ramp door, purchase separately if desired.

ATP Covered Wheelboxes (Tandem Axle) Aluminum

Covers interior wheel well boxes on 8' or 8.5' wide models

ATP Covered Wheelboxes (Triple Axle) Aluminum

Covers interior wheel well boxes on 8' or 8.5' wide models

ATP or Black RTP, Black Rubber Coin, B & W Vinyl on Rear Ramp Door and Flap

Your choice of black & white checkered vinyl, aluminum tread plate or black rubber tread plate or black rubber coin covering on the rear ramp door and ground end flap. Any width trailer. Indicate your selection in your checkout notes section.

Black COIN Design Rubber Flooring ($38 per linear foot)

Black rubber coin design floor covering. Considered softer to stand on than rubber treadplate. Calculated per foot x length of trailer, any width. (Does not include covering for ramp door & flap, must add separately if desired)

Black Rubber Tread Plate Flooring ($37 per linear foot)

Black rubber tread plate floor. Calculated per foot x length of trailer, any width. (Does not include covering for ramp door & flap, must add separately if desired)

Black/White Vinyl Checkered Flooring ($36 per linear foot)

Floor covering (must add covering for ramp door and flap separately if desired). Calculated at per foot x length of trailer, any width model.

Carpeted Sidewalls-Up to 8' Inside Height ($50 per linear foot)

Dark carpet on all walls floor to ceiling. Calculated at per foot x length of trailer, any width model.

Double 3/4” Plywood Flooring ($32 per linear foot)

Double layer of 3/4” plywood for floor. Calculated at per foot x length of trailer, any width model.

Double 3/4” Plywood on Rear Ramp Door (standard height models) *Recommend adding dbl spring asst)

Double the 3/4” plywood on the rear ramp door on any standard height model. Makes rear door heavier. On 8' or 8.5 wide models it is highly recommended to also add the double spring assist on the ramp door. (Double spring assist not available on models smaller than 8' wide)

Floor Insulation ($25 per linear foot)

Calculated at per foot x length of trailer, any width model.

Indoor/Outdoor Carpet on Floor ($38 per linear foot)

Dark indoor/outdoor carpet floor covering. Calculated at per foot x length of trailer. Any width.

Steel Ramp Over Wheel Wells w/ATP or RTP Covering-24” wide x 16' Long

Ramp over interior wheel wells. Steel frame topped with plywood. You choice aluminum tread plate or rubber tread plate covering. 8.5 wide models.

Steel Ramp Over Wheel Wells w/ATP or RTP Covering-24” wide x 18' Long

Ramps over interior wheel wells. Steel frame topped with plywood. Your choice of aluminum tread plate or rubber tread plate covering. 8.5' wide models

Steel Ramp Over Wheel Wells w/ATP or RTP Covering-24” wide x 20' Long

Steel frame topped with plywood. Your choice aluminum tread plate or rubber tread plate covering on ramp over interior wheel wells-8.5 wide models.

Steps Built-Inside a Gooseneck Model to Access Front Riser Storage Area

This options adds built-in aluminum framed steps inside the trailer to access the front riser storage area. Steps are covered in rubber treadplate.

Upgrade Floor to 1/8” Diamond Plate Steel on Any Width Model ($95 per linear foot)

This upgrades from the standard 3/4” plywood to 1/8” diamond plate steel floor. No plywood on floor. Price is calculated times per linear foot of any width trailer.

Upgrade to 3/4” Pressure Treated Plywood Floor ($24 per linear foot)

In Lieu of Standard non-pressure treated Plywood Floor. Calculated at per foot x length of trailer, any width model.

Upgrade to 3/4” Pressure Treated Plywood on a Ramp Door-Any Width

In Lieu of Standard non-pressure treated 3/4” Plywood on a ramp door, any width.

Upgrade to Double 3/4” Pressure Treated Plywood Flooring ($48 per linear foot)

Double layer of pressure treated 3/4” plywood flooring. Calculated at per foot x length of trailer, any width model.

'Recessed 12V Battery Storage Compartment (6” or 8” Frame Models Only)

Add this if you also purchase a 12V battery for inside 12V power and want to recess the battery in the floor. Only available to install in a 6” or 8” mainframe model.

12” On Center Floor Crossmembers (24' Trailer and Smaller)

Every 12” Floor Brace members on 24' and shorter models-(standard is 16” on all tandems regardless of length)

12” On Center Floor Crossmembers (26' Trailer and Larger)

Every 12” Floor Brace members-(standard is 16” on tandem axles) on 26' and longer models

12” On Center Roof Bows (Any Length)

Tubing roof bow members every 12”-any length

12” On Center Wall Post (24' Trailer and Smaller)

Tubing wall posts every 12”-on 24' and shorter models

12” On Center Wall Post (26' Trailer and Larger)

Tubing wall posts every 12”-on 26' and longer models

16” On Center Floor Crossmembers (Up to 7 x 14 Single Axle)

Every 16” Floor Brace members-(16” is standard on all tandems)

16” On Center Roof Bows (Any Length)

Tubing roof bows every 16”-any length.

5' Ramp Door in V-Nose W/ Extra Extended V-Nose and 110” Draw Bars

Has longer V nose and extended tongue to fit door in V

Add 1/4” Steel Skid Plate Under Rear Corner Posts

Add this on any size trailer to help protect the corners of the rear in case they drag the ground.

Angled Cross Brace/Strap on Side Wall Posts-(REQUIRED on ANY Trailer With 9' Inside Height or Taller)

This is a required add on ANY width model with 9' inside height or taller. Adds cross/strap brace for more support on side wall posts. Included standard on all stacker models.

Double 8” Main Frame Upgrade (required purchase on all rear porch models) $40 PLF

This is a required option on all trailer sizes with a back porch custom build purchase. Price is calculated at per linear foot x the length of the overall trailer you are ordering, not just the back porch size, because the entire trailer frame must be double 8”. to support the rear porch.

Flat Front In Lieu of Standard V-Nose Front ($20 Change Fee Only)

V-Nose front with the ATP nose & corner plate is standard on all models. Add this change option to convert your trailer to a flat nose front with aluminum corners instead of the standard V-Nose front. This is a change fee only.

Framed Opening Welded In Trailer Side Wall-Your Location (For After-Market Use)

Framed opening is welded into the wall framework as close to your chosen location as possible. Plywood is cut out on inside, metal is over outside for customer to remove after-market, to install customer's desired item, etc. Must furnish us a drawing showing what inside size opening you desire and at what approximate wall location. Variance allowed.

Removable/Detachable Tongue (Available on Standard Length Tongues Only- Flat Front ONLY-Min 6” Main Frame)

Tongue is made to completely detach from trailer frame when parked. Includes a pair of 5000 lb scissor jacks on front corners of trailer to support trailer when tongue is removed. NOTE: Cannot be used on any models with extended tongue option and must be a flat front model, not available on a V-nose model. MUST have a minimum of 6” main frame.

Slant Top Roof Upgrade on a V-Nose Model

By slanting the roof top down on  V-nose, it assists in aerodynamics of air flow over trailer.

Steel Winch Plate

Welded to framework, normally centered inside front of trailer, but can be placed at your location. It is under plywood floor on frame for your after market winch installation.

UPGRADE Ceiling Cross Bows to 1-1/2”x 2” Tubing From Standard 1”x 1-1/2” Tubing ($18 PLF)

Add this if you want larger ceiling cross braces on any Anvil trailer size. Price is calculated per linear foot x trailer length of any width model.

Upgrade to 3” Tube Floor Cross Members ($28 per linear foot)

Upgrade from standard C-channel to 3” Tubing floor brace members. Calculated at per foot x length of trailer, For 5' or 6' wide models up to 14' long standard with 3” tube main frame.

Upgrade to 4” Main Frame from 3” Main Frame ($30 per linear foot)

Upgrade any standard 3” mainframe model to 4”. Calculated at per linear foot x length of trailer

Upgrade to 4” Tube Floor Cross Members ($32 per linear foot)

Upgrade from standard C-channel to 4” tube floor brace members. Calculated at per foot x length of trailer, for any 6', 7' wide models up to 14' long standard with 4” tube main frame.

Upgrade to 6” Main Frame from 3” Main Frame ($38 per linear foot)

Upgrade any standard 3” mainframe model to 6”. Calculated at per linear foot x length of trailer

Upgrade to 6” Main Frame from 4” Main Frame ($27 per linear foot)

Upgrade any standard 4” mainframe model to 6”. Calculated at per foot x length of trailer

Upgrade to 6” Tube Floor Cross Members ($40 per linear foot)

Upgrade from standard C-channel to 6” Tube Floor Brace  members. Calculated at per foot x length of trailer, any model standard with 6” mainframe.

Upgrade to 8” Main Frame ($40 per linear foot)

Note: 8” main frame comes standard on any trailer 8.5 x 26' and longer.  Upgrade any other size to 8” main frame calculated at per foot x length of trailer. This option is required with any water service package to allow room for water tanks under trailer. Highly recommended for any models with 42” extra height or more.

Upgrade to 8” Tube Floor Cross Members ($75 per linear foot)

Upgrade from standard C-channel cross members to 8” tubing cross members. Calculated at per foot x length of trailer, any 26' or longer model standard with 8” mainframe..

Upgrade to EXTRA WIDE 95-1/2” Rear Ramp Door Opening (8.5 Wide Models Only)

Select this option to have the rear framework modified to make the rear ramp door opening the maximum width of approximately 95-1/2” which is  about 4” wider than the standard 91-1/2” width. For 8.5 wide models only.

Upgrade to Longer V-Nose w/Extra Longer” Triple Tube Tongue, 4' Ramp Door in V

From standard V nose this option upgrades to longer V nose, (very pointed) with a 4' ramp door in the V-nose, includes upgrade to extra long extended triple tube tongue. For 7' wide or wider models only.

Upgrade to the Extended 2' V-Nose W/Longer Triple Tube Tongue (Any Width Model)

This extends the V-nose to a full 2' and extends the tongue, adds a 3rd middle tube to accommodate the longer V-Nose.

Upgrade V-Nose to 4' Long W/Extra Long 72” Triple Tube Tongue Included

From standard V nose this option upgrades to 4' V nose, (more pointed) includes upgrade to extra long extended 72” triple tube tongue. For 7 wide and larger models only.

Upgrade V-Nose to 5' Long W/Extra Long 72” Triple Tube Tongue Included

From standard V nose this option upgrades to 5' V nose, (very pointed) includes upgrade to extra long extended triple tube tongue. For 8' or 8.5' models only.

UPGRADE Wall Posts to 1-1/2”x 2” Tubing From Standard 1”x 1-1/2” Tubing ($20 PLF)

Add this if you want larger wall posts on any Anvil trailer size. Price is calculated per linear foot x trailer length of any width model.

03” Extra Height to 6' or 7'' Wide Trailer Only ($20 per linear foot)

Calculated per foot x length of trailer. Increases interior height from standard 6'3” to 6'6” ( 78” inside height) and the overall height.

06” Extra Height to Any Width Trailer ($24 per linear foot)

Calculated per foot x length of trailer. Increases interior and overall height.

09” Extra Height to 6' or 7'' Wide Trailer Only ($26 per linear foot)

Calculated per foot x length of trailer. Increases interior height from 6'3” to 84” (7'inside) and the overall height.

12” Extra Height to Any Width Trailer ($33 per linear foot)

Calculated per foot x length of trailer. Increases interior and overall height.

18” Extra Height to Trailer ($36 per linear foot)

Highly recommended to add the Double Spring Assist option for all 8' and 8.5' wide Models. 18” extra height calculated per foot x length of trailer.

24” Extra Height to Trailer ($42 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Models. 24” extra height calculated per foot x length of trailer.

30” Extra Height to Trailer ($55 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. 30” extra height calculated per foot x length of trailer. NOTE: On 8' and 8.5' wide models, it is required that you also add the ”Extra Height Wall Cross Bracing” option listed separately. On 14' and shorter models also recommended that you upgrade to at least a 6” frame, on 16'-14' models recommended to upgrade to 8” frame.

36” Extra Height to Trailer ($60 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. 36” extra height calculated per foot x length of trailer. NOTE: Requires adding the ”Extra Height Bracing” option separately, regardless of the width/length of the trailer you are ordering. Recommended: On 26' or longer models, highly recommended to upgrade to the 8” frame option. On 14' and shorter recommended to upgrade to at least the 6” frame option.

42” Extra Height to Trailer ($70 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. 42” extra height calculated per foot x length of trailer. NOTE: Requires adding the ”Extra Height Bracing” option separately, regardless of the width/length of the trailer you are ordering. Recommended: On 26' or longer models, highly recommended to upgrade to the 8” frame option. On 24' and shorter recommended to upgrade to at least the 6” frame option.

48” Extra Height to Trailer ($75 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. 48” extra height calculated per foot x length of trailer. NOTE: Requires adding the ”Extra Height Bracing” option separately, regardless of the width/length of the trailer you are ordering. Recommended: On 26' or longer models, highly recommended to upgrade to the 8” frame option. On 24' and shorter recommended to upgrade to at least the 6” frame option.

54” Extra Height to Trailer ($85 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. 54” extra height calculated per foot x length of trailer. NOTE: Requires adding the ”Extra Height Bracing” option separately, regardless of the width/length of the trailer you are ordering. Highly recommend also upgrading to 6” or 8” frame.

Angled Cross Brace/Strap on Side Wall Posts-(REQUIRED on ANY Trailer With 9' Inside Height or Taller)

This is a required add on ANY width model with 9' inside height or taller. Adds cross/strap brace for more support on side wall posts. Included standard on all stacker models.

Double Spring Assist On Ramp Door-8' or 8.5' Wide Models Only (Required on all with 24” Extra Height or Taller)

Only available on 8' or 8.5' wide models. Makes raising and lowering ramp door easier and safer. Required on any 8' wide or 8.5' wide trailer that has 24” or more extra height added. NOTE: This double spring assist comes standard on the 7,000 lb super duty ramp door upgrade.

Rear Ramp Door Winch w/12V Battery (Highly Recommended If Ramp Door Height Needed is Over 8')

Ramp doors come standard up to an 8'6'' inside height trailer, (ramp door opening will be about 8'). This is as tall as any standard ramp door can go, unless you want to extend the ramp door opening height taller, then you will need to add this door winch because the door is too heavy to raise & lower manually. Winch is ceiling mounted with cable that hooks to ramp door. Comes with 12V battery.

Reduce the interior/total height of Any Size Trailer ($18 per linear foot)

Reduce the height of any width/length trailer to the interior/overall height of  your choice. Calculated at per foot x length of trailer.

Wing Rear Top w/3-LED Exterior Lights/Switch (Any Width Model)-See Note on Rear Door Heights

Add this custom rear wing on any width model. NOTE: All Anvil models with a ramp rear door, the ramp door height is always 6” shorter than whatever inside height you are ordering. With this wing top rear option added, if you choose double rear barn doors, the rear door header height is 12” shorter than inside height so the barn doors can swing open and clear the wing top sides.

3/4” Plywood Walls ($33 per linear foot)

3/4” Plywood In Lieu of Standard 3/8” Plywood. Calculated at per foot x length of trailer, any width model.

3/4” Pressure Treated Plywood Walls ($42 per linear foot)

3/4” pressure treated in Lieu of Standard 3/8”untreated. Calculated at per foot x length of trailer, any width model.

3/8” Plywood Ceiling Liner ($28 per linear foot)

Same 3/8” plywood as standard on walls. Calculated at per foot x length of trailer, any width model.

3/8” Plywood Finish Partition Wall (8' Long or Shorter)

Must purchase a walk thru door separately if desired. Wall can be placed at your chosen inside location.

Aluminum Composite .080 PolyCore Ceiling Liner ($35 per linear foot)

Aluminum with thicker composite backing. Calculated at per foot x length of trailer, any width model. Must order composite wall panels separately to match composite ceiling, if desired. Choose from any standard color.

Aluminum Composite .080 PolyCore Wall Panels ($46 per linear foot)

Aluminum composite backed thicker panels on walls.  Ceiling composite panels to match walls must be purchased separately, if desired. Calculated at per foot x length of trailer, any width model. Choose from any standard color.

Aluminum Covered Partition Wall (8' Long or Shorter)

Any standard color metal over plywood wall. (Must purchase a walk through door separately if desired)

Aluminum Tread Plate (ATP) Ceiling Liner ($28 per linear foot)

Aluminum tread plate (ATP) ceiling liner. Calculated at per foot x length of trailer, any width model.

Aluminum Tread Plate (ATP) Walls ($35 per linear foot)

Aluminum tread plate covered walls. Ceiling liner must be purchased separately, ramp door/flap covering must be purchased separately, if desired. Calculated at per foot x length of trailer, any width model.

Ceiling-Therma Cool Ceiling Sheath ($8 per linear foot) Helps Reduce Inside Heat

Insulative sheathing for the ceiling. (not the same as a ceiling liner or ceiling insulation). Smooth, thick proprietary fibrous with laminated facers of .078” water resistant adhesive kraft paper on both sides. Installed between roof braces and metal roof to assist in insulation of trailer. Calculated per foot x length of trailer, any width model. Can be added with or without regular ceiling insulation.

Closet-1/2 Height

Sits over a base cabinet that must be added separately of at least 2'.

Closet-Full Height

Approximately 2' wide. Normally added on next to a base and overhead cabinet which must be purchased separately.

Full Bathroom w/Larger 36”x36” Shower (Including Full Water Service Package

Note: Approximately 6'x6'.  Requires minimum 7' Interior Height Trailer! Includes full water service package w/55 gal waste water holding tank w/dump valve, 43 gal fresh water tank, city water fill inlet, 110v water pump, 6 gal electric water heater, all plumbing.  The larger 36” x 36” shower, toilet, hand sink in base cabinet, 110V light w/switch, 110V power roof vent w/fan, 24” door and partition wall. (Must purchase 110V electrical panel box or complete electrical package separately, if desired).

Full Bathroom w/Standard 24”x24”Shower-Including Full Water Service Package

Note: Approximate 6' x 4'overall dimensions. Requires minimum 7' Interior Height Trailer! Includes full water service package w/55 gal waste water holding tank w/dump valve, 43 gal fresh water tank, city water fill inlet, 110v water pump, 6 gal electric water heater, all plumbing.  The standard 24”x24” shower, toilet, hand sink in base cabinet, 110V light w/switch, 110V power roof vent w/fan, 24” door and partition wall. (Must purchase 110V electrical panel box or complete electrical package separately, if desired).

Half Bath w/Full Water Service Package (No Shower)

Approximately 4'x4'. Includes full water service package w/55 gal waste water holding tank w/dump valve, 43 gal fresh water tank, city water fill inlet, 110v water pump, 6 gal electric water heater, all plumbing.  Toilet,  hand sink in base cabinet, 110V light w/switch, 110V power roof vent w/fan, 24” door and partition wall.  (Must purchase 110V electrical panel box or complete electrical package separately, if desired).

Insulation-Ceiling ($12 per linear foot)-*Requires Separate Ceiling Liner Purchase

Calculated at per foot x length of trailer, any width model. NOTE: When purchasing ceiling insulation, you must separately purchase a ceiling liner material of your choice to hold up the insulation. Note: Goosenecks come with ceiling liner included.

Insulation-Walls ($20 per linear foot)

All insulated walls. Calculated at per foot x length of trailer, any width model.

Loft/Shelf Front Storage On 2-Car Stacker Models ONLY (Per Foot of Depth Across Full Width)

Choose this to add a custom plywood loft/shelf on welded framework across the front wall of any 2-car stacker model trailer. Price is by the foot. Add to cart then change quantity to how many feet long you want the loft/shelf to extend back from the front of the trailer. Normally can be 3' to 6' long depending on the length trailer you order.

Metal Covered Work Table on Metal Legs (Per Foot)

Your choice 12”, 18” or 24” deep, aluminum covered 3/4 plywood w/metal trim, work table on aluminum legs, free standing in your location choice. Add to your cart then update quantity to desired total feet of table. List depth desired in checkout notes. (Minimum order of 4 ')

Shelf (Fold-down) on Wall w/ 2” Lip Edge (12”-24” Deep) Per Foot

3/4” plywood shelving, 12” to 24” (your choice) deep trimmed with front lip edge, covered in metal. Attached to wall on fold-down brackets in your designated location. Add to cart, then change quantity in cart to the desired length of shelving.  Price is per foot, minimum order of  4'.

Shelf (Stationary) on Wall w/ 2” Lip Edge (12”-24” Deep) Per Foot

3/4” plywood shelving, 12” to 24” (your choice) deep trimmed with front lip edge, covered in metal. Attached and braced to wall in your designated location. Add to cart, then change quantity in cart to the desired length of shelving.  Price is per foot, minimum order of  4'.

Steps Built-Inside a Gooseneck Model to Access Front Riser Storage Area

This options adds built-in aluminum framed steps inside the trailer to access the front riser storage area. Steps are covered in rubber treadplate.

10' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual size).

100 lb. Propane Tank Aluminum Holding Cage ONLY (Each)

Cage only. Tongue mounted or rear mounted as shown. (Two cages pictured as example)

12' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual size).

3 Compartment Dish Wash Sink w/Faucet (No Backsplash or Drainboards) Water Service Not Included

NSF approved. No Back splash or Drainboards are included. No water supply or holding tanks, etc. Note: Must purchase water service and electrical package separately if desired.

3 Compartment Dish Wash Sink w/Faucet & Backsplash-No Drainboards-Water Service Not Included

NSF approved. Includes 3 sinks and faucet with backsplash. No water or electrical supply included, you must purchase these separately if desired.

4' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual style/size).

6' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual style/size).

8' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual size).

Single Handwash Sink w/Faucet in 24” Cabinet

No water supply included unless you purchase separately.

Total Complete Water and 3-Sinks Kitchen Concession Package (8' or 8.5' Wide Models Only) (requires 8” mainframe on trailer)

Any model 24' or shorter also requires upgrading to 8” mainframe on models needed to accommodate this package. Package Includes: 3 Compartment Dish Wash Sink w/Faucet, Single Hand wash Sink w/Faucet, Large Water Package w/55 gal waste water holding tank w/dump valve, 43 gal fresh water tank, city water fill inlet, 110v water pump, 6 gal electric water heater, all plumbing, and the Base Cabinet for all sinks, fully installed and ready to use. (Does not include electrical, must purchase separately if desired)

Vent Hood Brace & Wire Stub ONLY (for your after-market hood install)

For your after market vent hood install. Must give us exact size and location for your after-market install.

Water Service Package-Installed (No Sinks or Cabinets) (requires 8” mainframe on trailer)

Also requires any trailer 24' or shorter to upgrade to an 8” mainframe to accommodate the holding tank/plumbing under frame. No sinks or cabinets included. Includes: 55 Gallon Waste Tank w/Dump valve, (mounted underneath frame) 43 Gallon Fresh Water Tank (mounted inside), City Water Fill Inlet, 110 Volt Water Pump, 6 Gallon Electric Hot Water Heater (inside), and all Plumbing. (connected if you purchase sinks separately). No electrical included (must be purchased separately if desired).

Ladder for Roof Access (Stationary)

Aluminum attached to front or side (Cannot attach to side on 8' or 8.5' wide models)

Ladder for Roof Access-BLACK (Stationary)

BLACK Aluminum attached to front or side (Cannot attach to side on 8' or 8.5' wide models). Generally purchased when also buying a blackout trim package on trailer.

Ladder Racks-Aluminum (Per Arm Section) Standard Height

Requires minimum of 2 arms. Each arm rated max 200 lbs capacity. Add to cart then set your quantity. Can be mounted at your location choice.

Ladder Racks-BLACK (Per Arm Section) Standard Height

Requires minimum of 2 arms. Each arm rated max 200 lbs capacity. Add to cart then set your quantity. Can be mounted at your location choice.

Ladder Racks-Cut Down Lower to Roof ($40 Per Each Arm Section)

This option will cut down to reduce height as low as possible to top of trailer for easier loading/unloading. Requires minimum of 2 arms. Each arm rated max 200 lbs capacity. Spaced at your choice location. Add to cart then set your quantity.

Observation Deck w/ Fold Down Rails, Gate, Exterior Ladder-8' or 8.5' Wides ONLY ($170 per foot length of Observation Deck Desired) *Also Requires Walk-on Trailer Roof-Additional Purchase

NOTICE: You must also add the full walk-on roof separately sold option for your whatever length trailer you are ordering. The Observation deck includes: Roof mounted observation deck with rails that fold up/down, walk thru gate, exterior ladder. Only available on 8' or 8.5 wide models. Add to cart then change quantity in cart to how long you want your observation deck. Minimum 8' long.

One Piece Aluminum Roof ($22 per linear foot)

No seams, all aluminum. Calculated at per foot x length of trailer-Any width model. (Not always available)

Slant Top Roof Upgrade on a V-Nose Model

By slanting the roof top down on  V-nose, it assists in aerodynamics of air flow over trailer.

Walk on Roof Package ($75 PLF)

Includes: 12” On Center Tubular Roof Bows, 3/4” Plywood in Roof, and One Piece Aluminum Roofing. Calculated at per foot x length of trailer you are ordering. Must be on entire length of trailer.

Walk on Roof Package w/Fold Down Metal Covered Roof Panels ($150 PLF)

Includes: 12” On Center Tubular Roof Bows, 3/4” Plywood in Roof, and One Piece Aluminum Roofing, Fold up/down metal covered rail 24” or 36” tall all around the top, both sides, both ends . Calculated at per foot x length of trailer you are ordering. Must be full length of trailer.

Walk on Roof Package w/Fold Down Open Rails, Gate ($115 PLF)

Includes: 12” On Center Tubular Roof Bows, 3/4” Plywood in Roof, and One Piece Aluminum Roofing, Fold down railing and walk thru gate. Calculated at per foot x length of trailer you are ordering. Must be full length of trailer.

12 Volt Electric 5k Tongue Jack W/Battery (Upgrade from a Standard Jack)

Includes separate 12V battery in a vented box mounted inside trailer front. (Picture for illustration purposes only and may not be exact style)

5000 lb. Scissor Jacks (Pair)

Bogey Wheels 10” Long (Pair)

Under rear frame to protect from dragging bottom of trailer on incline

Bogey Wheels 6” Long (Pair)

Under rear of frame to protect from dragging trailer on incline

Caster Wheel on Tongue Jack (comes standard with sand foot) NOTE: Cannot be added on a flip up jack!

All Anvil models include a sand foot in base price. Choose this to upgrade to a caster wheel. (not recommended for tandem or triple axle models). Caster wheel cannot be added on a flip up jack upgrade.

Electric 4500# Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer. Includes 12V electric 4500 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Electric 6000# HD Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer with at least 5200 lb axles. Includes 12V electric 6000 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Flush Mount Floor D-Rings (welded in frame)-Each

Note: All 8.5 wide models come standard with 2 in front and 2 in rear.

Fold Down Stabilizer Jacks (Pair)

Usually for rear corners (can also be placed on front corners)

Motorcycle Wheel Chock (Removable)

Installed your location choice or loose. We recommend also purchasing at least two floor D-Rings for tie down use with each chock.

Rear Drop Down Jacks (3000 lb.) (Pair)

Recessed Flush Mount Floor E-Track ($18 per foot)

Welded and recessed flush mounted in floor, your location. Minimum 8' purchase. Add item to your cart then update your cart to the total amount of feet to run length of your trailer per run.

Set-Back The Standard Tongue Jack-(Requires Flat Front or Adding Extended Tongue Option on V-nose Model)

Must change to a flat front (n0 V-nose) or with the V-nose you must add an extended tongue option to allow room to set back the jack. This will move the standard tongue jack back in the A-frame tongue area, allowing most tailgates to drop without hitting the jack.

Side Wind Handle Jack (Not Flip-Up) In Lieu of Standard Top Wind 2000 lb. Tongue Jack

Winds on side instead of top

Steel Winch Plate

Welded to framework, normally centered inside front of trailer, but can be placed at your location. It is under plywood floor on frame for your after market winch installation.

Triple Tube Tongue-Adds a 3rd Center Tube in Standard A-frame Tongue (No Tongue Length Added)-Any Size

Adds a center tube down A-frame on standard length tongue. Any size model.

Upgrade to 5000 lb Tongue Jack from Standard 2000 lb Tongue Jack

Upgrades to heavier duty 5k wind up tongue jack

Upgrade to 7000 lb Drop Leg Tongue Jack from Standard 2000 lb Tongue Jack

NOT available on 4' or 5' extended V-nose models. Upgrades to heavier duty drop leg jack, from standard 2000 lb jack

Upgrade to Swing Up/Away Tongue Jack (cannot use with a caster wheel)

Upgrade from standard wind up/down to swing up wind up/down jack

Wall E-Track (Horizontal) Recessed Flush Mount ($14 per foot)

Welded and recessed in wall running horizontally. Add item to your cart then update cart to how many total feet of wall E-track you want. Run is full length of box. Example: 6x12 trailer needs 24' of horizontal wall E-track to have 1-run on each side wall. Your choice height location.

Wall E-Track (VERTICAL) Recessed Flush Mount ($28 per foot)

Welded and recessed in wall running vertically. Add item to your cart then update cart to how many total feet of VERTICLE wall E-track you want. Calculate total feet needed by multiplying the inside height of your trailer times how many vertical runs of E-track you want on each side wall. Example: If your trailer inside height is 7' and you want four vertical E-tracks on each side wall, 7' x 4 tracks is 28' for one side so you will need 56' total for both sides. You must provide us at what locations you want the vertical E-track. Add to cart then update quantity in cart to total needed.

Wall Mount D-Rings-Each

Screwed into tubing wall post studs, your location choice. Standard is 36” above floor level.

Winch Box Only (Steel) Recessed in Floor (6” or 8” Main Frame Models Only)

Winch box is recessed in floor at your choice location, normally centered in front of any trailer. Must add winch as separate purchase if desired.

”Bulldog” 2-5/16” Coupler in Lieu of Standard 2-5/16” Coupler

Upgrades the coupler style on all tandem axle models with 2-5/16” standard coupler.

”Bulldog” 2” Coupler In Lieu of Standard 2” Coupler

Upgrades the coupler style on all single alle models with 2” standard coupler

2-5/16” Stationary Coupler UPGRADE in Lieu of Standard 2” Stationary Coupler

Choose this to upgrade single axle model from a standard 2” ball coupler to a standard 2-5/16” ball coupler

60” Extended Triple Tube Tongue (6” Main Frames and Smaller) For 24' and shorter models

Adds about 16” additional length to tongue. Any size up to 8.5 x 24 and smaller models

60” Extended Triple Tube Tongue (8” Main Frames) For 26' and longer models

Adds about 16” additional length to tongue. For any size 8.5 x 26 and larger models

72” Extended Triple Tube Tongue (6” Main Frames and Smaller) For any 24' or shorter model

Adds about 25” to 28” additional length to standard tongue length depending on width. Any size up to 8.5 x 24 and smaller models

72” Extended Triple Tube Tongue (8” Main Frames) For 26' and longer

Adds about 28” additional length to standard tongue length. For any size 8.5 x 26 and larger models

Adustable 2-5/16” Coupler in Lieu of Standard 2-5/16” Coupler

Allows you to adjust the coupler height to multiple positions. Upgrades any tandem axle model with a standard 2-5/16” coupler.

Adustable Pintle Eye Coupler In Lieu of Standard Coupler

Also called Government or Military Style

Change From the Standard Gooseneck 2-5/16” Ball Coupler to a Fifth Wheel/Kingpin Coupler (adapter)

This option will switch the standard gooseneck ball coupler to a Fifth Wheel/Kingpin coupler as used on fifth wheel campers or 18 wheelers.

Cover Tongue Area in Steel Treadplate (Requires Flat Front or Extended Tongue on a V-Nose Model)

For a generator or other equipment mounting area. Flat front models, or on V-nose models you must add the upgrade to either a 60” or 72” extended tongue, depending on how much depth you need on tongue plate.

Cover Tongue Area w/3/4” Plywood and ATP (Requires Flat Front or Extended Tongue on a V-Nose Model)

For a generator or other equipment mounting area. Flat front models, or on V-nose models you must add the upgrade to an extended tongue.

Platform (Steel) Mounted Across Tongue For After-Market Generator, etc (Requires Flat Front or Extended Tongue on V-Nose Model)

Steel mounting platform across the tongue for mounting your generator or other equipment. Built to your specified size provided there is enough room on the tongue. Must be a flat front model or must add an extended tongue to allow room as needed.

Removable/Detachable Tongue (Available on Standard Length Tongues Only- Flat Front ONLY-Min 6” Main Frame)

Tongue is made to completely detach from trailer frame when parked. Includes a pair of 5000 lb scissor jacks on front corners of trailer to support trailer when tongue is removed. NOTE: Cannot be used on any models with extended tongue option and must be a flat front model, not available on a V-nose model. MUST have a minimum of 6” main frame.

Set-Back The Standard Tongue Jack-(Requires Flat Front or Adding Extended Tongue Option on V-nose Model)

Must change to a flat front (n0 V-nose) or with the V-nose you must add an extended tongue option to allow room to set back the jack. This will move the standard tongue jack back in the A-frame tongue area, allowing most tailgates to drop without hitting the jack.

Triple Tube Tongue-Adds a 3rd Center Tube in Standard A-frame Tongue (No Tongue Length Added)-Any Size

Adds a center tube down A-frame on standard length tongue. Any size model.

Upgrade a Gooseneck to Electric Landing Gear (Dual Jacks) w/ 12V Battery in Box

This option upgrades the landing gear (jacks) on any gooseneck model from manual hand operated to 12V Electric powered jacks and includes the battery in a box.

Upgrade a Gooseneck to Electric Landing Gear (Single Jack) w/ 12V Battery in Box

This option upgrades the landing gear (jack) on any gooseneck model from manual hand operated to 12V Electric powered single jack and includes the battery in a box.

110 Volt Powered Roof Vent

Requires 110V electric power service added separately if desired.

12 Volt Powered Roof Vent

Add 12v powered vent-each.  Note: Must add 12V battery pack separately if desire to run fan when not plugged to vehicle 12V power

13.5 BTU A/C W/ Heatstrip (Includes Required Wire & Brace)

Includes the required wire & brace for A/C, does not include electrical service that must be purchased separately if desired.

13.5 BTU A/C W/ Heatstrip and Wall Mount Thermostat W/Battery (Includes Brace & Wire Stub)

Includes the required wire & brace for A/C mounting. Does not include electrical, must purchase separately.

13.5 BTU A/C W/ Heatstrip Low Profile (Includes Brace & Wire Stub)

Includes the required wire & brace for A/C mounting. Does not include electrical, must purchase separately

15.0 BTU A/C W/ Heatstrip (Includes Brace & Wire Stub)

Includes the required wire & brace for A/C mounting. Does not include electrical, must be purchased separately.

15.0 BTU A/C W/ Heatstrip and Wall Mount Thermostat W/Battery (Includes Brace & Wire Stub)

Includes the required wire & brace for A/C mounting. Does not include electrical service, must purchase separately if desired

15.0 BTU A/C W/ Heatstrip Low Profile (Includes Brace & Wire Stub)

Includes the required wire & brace for A/C mounting. Does not include electrical, must purchase separately

15.0 BTU A/C W/Heatstrip Low Profile and Wall Mount Thermostat W/Battery (Includes Brace & Wire Stub)

Includes the wire & brace for A/C option. Does not include electrical, must purchase separately

Add Extra Plastic Sidewall Vents (White or Black) One Pair

All Anvil trailer models come standard with one pair of these stationary flow through air vents, but you can add another pair by choosing this option. Add another pair of plastic sidewall flow thru air vents. Will be black or white to best match exterior color.

Add Non-Powered Wind-up RV Style Roof Vent

All Anvil trailer models come standard with plastic (white or black to color match) stationary, flow through side air vents. (one pair).  Add this non-powered roof vent option if you also want a roof vent-per each, your location choice.

Add Two-Way Sidewall Vents (Black or Aluminum) One Pair

Add (or upgrade) one pair of adjustable open/close sidewall two-way vents. Black or aluminum to best match exterior metal choice. All Anvil trailer models come standard with plastic (white or black to color match) stationary, flow through side air vents. (one pair).

Electric Baseboard Heater W/ Thermostat 30” Long

Does not include electrical, must purchase separately

Electric Baseboard Heater W/ Thermostat 48” Long

Does not include electrical, must purchase separately

Framed Opening Welded In Trailer Side Wall-Your Location (For After-Market Use)

Framed opening is welded into the wall framework as close to your chosen location as possible. Plywood is cut out on inside, metal is over outside for customer to remove after-market, to install customer's desired item, etc. Must furnish us a drawing showing what inside size opening you desire and at what approximate wall location. Variance allowed.

Maxx-Air Roof Vent Cover

Adding this cover extends roof vent life, allows you to leave your roof vent open for better ventilation, while driving or parked.

Mini-Split 12k BTU (1-Ton) A/C Unit (Requires Min 7'6” Interior)

Includes: The outside cooling unit usually mounted on a flat front model, can mount on a 8.5 wide V front, comes with one inside blower unit at installed at your inside location choice.

Mini-Split 18k BTU (1-1/2 Ton) A/C Unit (Requires Min 7'6” Interior)

Includes: The outside cooling unit usually mounted on a flat front model, can mount on a 8.5 wide V front, comes with one inside blower unit at installed at your inside location choice.

Mini-Split 24k BTU (2 Ton) A/C Unit (Requires Min 7'6” Interior)

Includes: The outside cooling unit usually mounted on a flat front model, can mount on a 8.5 wide V front, comes with one inside blower unit at installed at your inside location choice.

Mini-Split 36k BTU (3 Ton) A/C Unit (Requires Min 7'6” Interior)

Includes: The outside cooling unit usually mounted on a flat front model, can mount on a 8.5 wide V front, comes with one inside blower unit at installed at your inside location choice.

Roof Installation Brace For A/C Install w/ Wire Stub Included

Optional purchase without an A/C purchase for your future A/C installation. Installed in roof, normally centered, but can be placed in your desired roof location.  You get both the wire stub and metal brace needed for your after market A/C  hookup. (no breaker box or electrical service, must add separately if desired)

Roof Installation Brace only For A/C Unit

Optional purchase without an A/C purchase for future A/C installation. Does not include any wiring. Placed in roof for your after market cut out for A/C install. Normally centered but can be placed at your desired roof location.

Upgrade From Standard Plastic Flow Thru Side Vents to Non-Powered Wind-up RV Style Roof Vent

All Anvil trailer models come standard with plastic (white or black to color match) stationary, flow through side air vents. (one pair).  Choose this option to upgrade to one non-powered roof vent centered in trailer roof (or in your choice roof location) in lieu of having the pair of plastic side air vents.

13” Spare Wheel w/Radial Tire-Fits ONLY 4' Wide Models (each)

Fits only the standard 2000 lb axle on a 4' wide model only. Standard steel wheel to match trailer. (Mount bracket must be purchased separately if desired)

5 Lug 13” Alloy ”Liger Dagger” Mag Radial Spare Tire (each) FITS ONLY 4' Wide Model

Fits only 4' wide model with 13”-5 lug 2000 axle hub. Per each wheel/tire

5 Lug 15” Alloy ”Liger Dagger” Mag Radial Spare Tire (each)

Fits any standard 3500 lb 5 lug axle hub. Per each wheel/tire

5 Lug 15” Standard Single/Tandem Axle Radial Spare Tire (each)

Fits standard 3500 lb 5 lug axle. Standard steel wheel to match trailer. (Mount bracket must be purchased separately if desired)

6 Lug 225 Alloy ”Liger Dagger”Mag Radial Spare Tire (Fits 5200 lb Axle)

Fits 5200 lb 6 lug axle hub. Price per each

6 Lug 225 Standard Radial Spare Tire (Fits 5200 lb Axle)

Fits 6 lug 5200 lb axle models. Standard steel wheel. (Mount bracket must be purchased separately)

8 Lug 17.5” Radial Spare Tire (Fits 8,000 lb Axles)

Fits 8,000 lb 8 lug axle. Standard steel wheel, 17.5” radial 16 ply. (Mount bracket must be purchased separately)

8 Lug 235 Alloy ”Liger Dagger” Mag Radial Spare Tire (Fits 7000 lb axle)

Fits 7,000 lb 8 lug axle hub.  Price per each.

8 Lug 235 Standard 16” Radial Spare Tire (Fits 7,000 lb Axles)

Fits 7,000 lb 8 lug axle hub. Standard steel wheel. (Mount bracket must be purchased separately)

8 Lug Alloy ”Liger Dagger” Mag 17.5” Radial Spare Tire (Fits 8000 lb axle)

Fits 8,000 lb 8 lug axle hub. 17.5” tire 16 ply. Price per each.

Inside Spare Tire Mount Bracket (your choice location)

This is to purchase the mount bracket only. Normally mounts on inside front wall. Can mount anywhere you choose on inside wall of trailer

Recessed Spare Tire Compartment (6” or 8” Mainframe Required)

Store a spare tire in recessed compartment in floor (for 6” or 8” Frame Models-7' wide x 16' or longer, any 8' and 8.5' wide models)

Spare 16” Steel (For Upgraded) Wheel & Radial Tire for 5200 lb 6 Lug Axle (E-Rated)

This spare fits the 5200 lb axle when you upgrade from standard 15” to to 16” 6 lug wheels on your trailer. E-rated capacity tire.

Spare Tire Mount Bracket on Tongue (Flat Front or Extended Tongue V-Nose Models Only)

Fits straight across on a standard or extended tongue flat front model or can be used on a V-nose model, but if ordered for a V-nose model, you must also purchase the 60” or 72” Extended Triple Tube Tongue option separately to allow for turning clearance with spare mounted on tongue area.

Upgrade to 16” Radial Tire (From 15” Standard) on a 6 Lug Standard 5200 lb Axle Wheel-Per Each Wheel

Upgrade from 15” to 16” radial tire on a standard 6 lug (52oo lb axle) wheel. E-Rated Capacity. Per wheel charge. Add to cart and then select quantity to match number of wheels on trailer. SA=2, TA= 4, Triple A=6

Upgrade to 17.5” Wheel/Tire (From the 16” Standard) on a 8 Lug 7000 lb Axle Model-Price Per Each Wheel

Upgrade wheel/tire size from the standard 16” tire (E-rated) to 17.5” tire (H-rated) on any 8 lug (7000 lb axle) model.  Includes the required larger wheel well box. Price is per wheel. Add to cart and then select quantity to match number of wheels on trailer ordering. SA=2, TA= 4, Triple A=6

Upgrade to Alloy ”Liger Dagger” Mag w/Radial Tires on 5 lug 3500 lb-Tandem Axles

Fits any standard 3500 lb 5 lug axle hub. This upgrades all wheels.

Upgrade to Alloy ”Liger Dagger” Mag w/Radial Tires on 5 lug 3500 lb-Triple Axles

Fits any standard 3500 lb 5 lug axle hub. This upgrades all wheels.

Upgrade to Alloy ”Liger Dagger” Mags w/17.5” Radial Tires on 8 lug 8000 lb-Triple Axles

Fits 8000 lb 8 lug axle hub. This upgrades all wheels to 17.5” with 16 ply radials..

Upgrade to Alloy ”Liger Dagger” Mags w/Radial Tires on 5 lug 2000 lb-Single Axles (FITS ONLY 4' Wide Model)

Fits only the 2000 lb 5 lug axle hub only on a 4' wide model. This upgrades all wheels.

Upgrade to Alloy ”Liger Dagger” Mags w/Radial Tires on 5 lug 3500 lb-Single Axles

Fits any standard 3500 lb 5 lug axle hub. This upgrades all wheels.

Upgrade to Alloy ”Liger Dagger” Mags w/Radial Tires on 6 lug 5200 lb-Single Axle

Fits any 5200 lb 6 lug axle hub. This upgrades both wheels.

Upgrade to Alloy ”Liger Dagger” Mags w/Radial Tires on 6 lug 5200 lb-Tandem Axles

Fits any 5200 lb 6 lug axle hub. This upgrades all wheels.

Upgrade to Alloy ”Liger Dagger” Mags w/Radial Tires on 6 lug 5200 lb-Triple Axles

Fits 5200 lb 6 lug axle hub. This upgrades all wheels.

Upgrade to Alloy ”Liger Dagger” Mags w/Radial Tires on 8 lug 7000 lb-Tandem Axles

Fits 7000  lb 8 lug axle hub. This upgrades all wheels.

Upgrade to Alloy ”Liger Dagger” Mags w/Radial Tires on 8 lug 7000 lb-Triple Axles

Fits 7000 lb 8 lug axle hub. This upgrades all wheels.

15” Wide X 30” Tall Radius Window W/Tint

Your location choice. Normally used in a side door.

30” Wide X 15” Tall Radius Window W/Tint

Your location choice

30” Wide X 30” Tall Radius Window W/Tint

Your location choice

Egress Slider Emergency Window (as in camper) 30”H x 30”L (only installed in roadside or solid rear wall)

Due to configuration for sliding and lifting, can ONLY be installed in the roadside wall or a solid rear wall. Add this window to sleep inside your trailer as it serves as an emergency exit through the window. Opens from inside with emergency latch. Can be placed at your location choice but ONLY in the roadside wall or in a rear solid wall of trailer.