10' Awning (8500 Series)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

10' Awning (9000 Series)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

12' Awning (8500 Series)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

12' Awning (9000 Series)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

14' Awning (8500 Series)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

14' Awning (9000 Series)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

16' Awning (8500 Series)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

16' Awning (9000 Series)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

18' Awning (8500 Series)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

18' Awning (9000 Series)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

20' Awning (8500 Series)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

20' Awning (9000 Series)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

22' Awning (8500 Series) (Center Support Leg Included)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

22' Awning (9000 Series) (Center Support Leg Included)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

24' Awning (8500 Series) (Center Support Leg Included)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

24' Awning (9000 Series) (Center Support Leg Included)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

8' Awning (8500 Series)

A & E 8500 series. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

8' Awning (9000 Series)

A & E 9000 series is in metal cover for protection when rolled in. Includes all mounting hardware and installed on the side of your trailer. Note: Awning length must be at least 2' shorter than the trailer you are ordering to allow room to mount arm brackets.

Add Electric Brakes on Single 3500 lb No Brake Axle Model

Add electric brakes and safety breakaway on a 5 lug 3500 lb single axle model standard with no brakes, upgrades to 7 pin wiring harness (Electric brake controller required on your tow vehicle)

Change Any 7' Wide Single Axle Model to ”Narrow Track” Axle w/Inside Fender Wells

Add this option for any weight capacity or type axle on any single 7' wide model. (Not available on any other widths). Will have a minimal fender area & skirt on outside of trailer.

Change Any 7' Wide Tandem Axle Model to ”Narrow Track” Axles w/Inside Fender Wells

Add this option for any weight capacity or type axle on any tandem axle 7' wide model. (Not available on any other widths). Will have a minimal fender area &  skirt on outside of trailer

Change from Standard Single or Tandem Drop Leaf Spring Axle to Straight Leaf Spring Axle

All models come standard with drop leaf spring axles. Changing to straight axles will raise the trailer bottom up about 3-1/2”  to 4” higher off the ground.

Upgarde Gooseneck to Triple 5200 lb Torsion Axles From Tandem 5200 lb Torsion Axles

Upgrade to triple 5200 lb torsion axles for any gooseneck model standard with tandem 5200 lb torsion axles.

Upgarde Gooseneck to Triple 7000 lb Torsion Axles From Tandem 5200 lb Torsion Axles

Upgrade to triple 7000 lb torsion axles for any gooseneck model standard with tandem 5200 lb torsion axles. Also upgrades to larger 8 lug 16” wheels.

Upgarde Gooseneck to Triple 7000 lb Torsion Axles From Triple 5200 lb Torsion Axles

Upgrade to triple 7000 lb torsion axles for any gooseneck model standard with triple 5200 lb torsion axles. Also upgrades to larger 8 lug 16” wheels.

Upgrade Gooseneck to Tandem 7000 lb. Torsion Axles from 5200 lb. Torsion Axles

Upgrade for any gooseneck model standard with 5200 lb torsion axles.  Also upgrades to larger 16” 8 lug wheels/tires.

Upgrade Tandem Axle to Spread (California) Style (8.5 wide torsion axles only)

Upgrade any tandem axle model to ”spread axle” design. Only available to use with torsion axles, must purchase torsion axles of your choice separately.

Upgrade to 5200 lb. Single Axle Hydraulic Surge Brakes from 3500 Idler Leaf Spring

Upgrades from a no brake 3500 lb idler axle to the 5200 lb surge brake axle. Also upgrades to 6 lug larger wheel

Upgrade to Hydraulic Brakes on 3500 lb. Torsion Tandem Axle from 3500 lb. Leaf Spring Tandem Axles

Upgrade to Hydraulic Surge Brakes on 3500 lb. Tandem Leaf Spring Axles

Upgrades any tandem model standard with 3500 lb electric brakes to surge brakes

Upgrade to Hydraulic Surge Brakes on Any 3500 lb. Single Axle

This adds surge brakes to a standard non-brake 3500 lb idler (no brake) axle model.

Upgrade to Hydraulic Surge Brakes with 5200 lb. Tandem Leaf Spring Axles from Tandem 3500 lb. Leaf Spring Axles

Upgrades axle capacity and from electric to surge brakes. Also upgrades to 6 lug larger wheels

Upgrade to Hydraulic Surge Brakes with 5200 lb. Tandem Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrades any model standard with 5200 lb electric brake drop leaf axles to torsion axles and surge brakes.

Upgrade to Hydraulic Surge Brakes with 7000 lb. Tandem Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Upgrades any tandem model with standard 3500 lb axles. Also upgrades wheels to 16”.

Upgrade to Hydraulic Surge Brakes with 7000 lb. Tandem Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrade any standard 5200 lb drop leaf axle model with electric brakes to 7000 lb torsion axles with surge brakes. Also upgrades to larger 8 lug 16” wheels

Upgrade to Single 3500 lb. Torsion Axle from Single 3500 lb. Leaf Spring Axle

No brakes

Upgrade to Single 3500 lb. Torsion Axle w/Brakes from Single 3500 lb. Leaf Spring Idler Axle

Upgrades from standard 5 lug drop leaf no brake single axle to 5 lug torsion single axle with electric brakes and safety breakaway, 7 pin wiring plug.

Upgrade to Single 5200 lb. Leaf Spring Axle w/Brakes from Single 3500 lb. Leaf Spring Idler Axle

Also adds electric brakes and safety breakaway, 7 pin wiring plug. (Electric brake controller required on your tow vehicle). Larger 6 lug wheels

Upgrade to Single 5200 lb. Torsion Axle w/ Brakes from Single 3500 lb. Leaf Spring Idler Axle

Also adds electric brakes and safety breakaway and larger 6 lug wheels, 7 pn wiring plug. (Requires electric brake controller on your tow vehicle)

Upgrade to Tandem 3500 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring

Upgrades any standard tandem axle model with 3500 lb drop leaf standard axles

Upgrade to Tandem 5200 lb. Leaf Spring Axles from Tandem 3500 lb. Axles

Also adds larger 6 lug 15” wheels & tires

Upgrade to Tandem 5200 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring

Upgrades from standard tandem 3500 lb leaf spring axles to 5200 lb tandem torsion axles with 6 lug larger wheels

Upgrade to Tandem 5200 lb. Torsion Axles from Tandem 5200 lb Leaf Spring Axles

Upgrades any model standard with 5200 lb axles from the standard leaf spring to torsion axles (6 lug)

Upgrade to Tandem 7000 lb. Leaf Spring Axles from Tandem 3500 lb. Axles (also upgrades coupler & jack)

Also upgrades to 15K Coupler and 5K Tongue Jack and 16” 8 lug wheels

Upgrade to Tandem 7000 lb. Leaf Spring Axles from Tandem 5200 lb. Axles

Upgrade for any model standard with 5200 lb leaf spring axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 16” 8 lug wheels/tires.

Upgrade to Tandem 7000 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

This upgrade also includes a 15K Coupler and 5K Tongue Jack. Also upgrades to 8 lug 16” wheels

Upgrade to Tandem 7000 lb. Torsion Axles from Tandem 5200 lb. Leaf Spring

Upgrades any model with 5200 lb drop leaf standard axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 16” 8 lug wheels.

Upgrade to Tandem 8000 lb. Leaf Spring Axles (17.5 Wheels) from Tandem 3500 lb. Axles

Also upgrades to 15K Coupler and 5K Tongue Jack and 17.5” wheels

Upgrade to Tandem 8000 lb. Torsion Axles (17.5 Wheels) from Tandem 3500 lb. Leaf Spring Axles

This upgrade also includes a 15K Coupler and 5K Tongue Jack. Also upgrades to larger 17.5” wheels.

Upgrade to Tandem 8000 lb. Torsion Axles (17.5 Wheels) from Tandem 5200 lb. Leaf Spring

Upgrades any model standard with 5200 lb drop leaf axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 17.5” wheel

Upgrade to Triple 3500 lb. Leaf Spring Axles from Tandem 3500 lb. Leaf Spring Axles

Upgrade to Triple 3500 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Upgrade to Triple 5200 lb. Leaf Spring Axles from Tandem 3500 lb. Leaf Spring Axles

Also upgrades to larger 6 lug wheels

Upgrade to Triple 5200 lb. Leaf Spring Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrade to Triple 5200 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Also upgrades to larger 6 lug wheels

Upgrade to Triple 5200 lb. Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrade to Triple 7000 lb. Leaf Spring Axles from Tandem 3500 lb. Leaf Spring Axles

Also upgrades to larger 8 lug 16” wheels and tires

Upgrade to Triple 7000 lb. Leaf Spring Axles from Tandem 5200 lb. Leaf Spring Axles

Upgrades any standard model with tandem 5200 lb drop leaf axles. Also upgrades to 8 lug 16” wheel

Upgrade to Triple 7000 lb. Torsion Axles from Tandem 3500 lb. Leaf Spring Axles

Also upgrades to larger 8 lug wheels and 16” tires

Upgrade to Triple 7000 lb. Torsion Axles from Tandem 5200 lb. Leaf Spring Axles

Also upgrades to larger 8 lug 16” wheels

Upgrade to Triple 8000 lb. Torsion Axles (17.5 Wheels) from Tandem 5200 lb. Leaf Spring Axles

Also upgrades to larger 17.5” wheels

Upgrade to Triple 8000 lb. Torsion Axles (17.5 Wheels) From Triple 5200 lb. Torsion Axles

Upgrades any model standard with triple 5200 lb torsion axles to 8000 lb triple torsion axles. Also includes 15K Coupler and 5K Tongue Jack. Upgrades to larger 17.5” wheel

Upgrade Triple Axle to Spread (California) Style (8.5 wide torsion axles only)

Add this after upgrading a tandem axle to triple torsion axles, to upgrade to the  ”spread axle” design. Only available to use with torsion axles, must purchase triple torsion axles of your choice separately.

18” Deep Overhead Cabinet w/Doors-Your Choice Length-($89 per Foot) Min 2'

Choose this item and add as many straight feet to your cart that you want.  (Minimum purchase 2'). You can choose the location. (Upper L purchase also required if in corner). Cabinets are metal in any of the 6 standard colors or mill (aluminum) finish, your choice.

24” Deep Base Cabinet w/Doors-Your Choice Length-($99 per Foot) Min 2'

Choose this item and add as many straight feet to your cart that you want.  (Minimum purchase 2'). You can choose the location. (Base L purchase also required if in corner). Cabinets are metal in any of the 6 standard colors or mill (aluminum) finish, your choice.

L Base Cabinet

Must purchase this if you want to L turn base cabinets around a corner

L Upper Cabinet

Must purchase this option if you want to L turn upper cabinets around a corner

Loft/Shelf Front Storage On 2-Car Stacker Models ONLY (Per Foot)

Choose this to add a custom plywood loft/shelf on welded framework across the front wall of any 2-car stacker model trailer. Price is by the foot. Add to cart then change quantity to how many feet long you want the loft/shelf to extend back from the front of the trailer. Normally can be 3' to 6' long depending on the length trailer you order.

12' Long x 5' Tall Concession Door

Longest available concession door only. This door is built by Anvil Trailer in factory.

4' Long x 12” Deep Fold-Down Concession Serving Shelf

For exterior or interior,  your choice location

4' Long x 3' Tall Concession Door

On gas shocks, with locks.

5' Long x 12” Deep Fold-Down Concession Serving Shelf

For exterior or interior,  your choice location

5' Long x 3' Tall Concession Door

5' Long x 4' Tall Concession Door

6' Long x 12” Deep Fold-Down Concession Serving Shelf

For exterior or interior,  your choice location

6' Long x 3' Tall Concession Door

6' Long x 4' Tall Concession Door

8' Long x 12” Deep Fold-Down Concession Serving Shelf

For exterior or interior,  your choice location

8' Long x 3' Tall Concession Door

8' Long x 4' Tall Concession Door

Metal Covered Work Table on Metal Legs (Per Foot)

Your choice 12”, 18” or 24” deep, aluminum covered 3/4 plywood w/metal trim, work table on aluminum legs, free standing in your location choice. Add to your cart then update quantity to desired total feet of table. List depth desired in checkout notes. (Minimum order of 4 ')

Shelf on Wall w/ 2” Lip Edge (By the Foot)

3/4” plywood shelving, 12” to 24” (your choice) deep trimmed with front lip edge, covered in metal. Attached and braced to wall in your designated location. Add to cart, then change quantity in cart to the desired length of shelving.  Price is per foot, minimum order of  4'.

4' Long x 3' Tall Concession Window w/Screen

With slider glass & screen, must also purchase concession door separately.

5' Long x 3' Tall Concession Window w/Screen

With slider glass & screen, your placement choice. Must also purchase a concession door separately.

5' Long x 4' Tall Concession Window w/Screen

With slider glass & screen, must also purchase concession door separately.

6' Long x 3' Tall Concession Window w/Screen

With slider glass & screen, your placement choice. Must also purchase a concession door separately.

6' Long x 4' Tall Concession Window w/Screen

With slider glass & screen, must also purchase concession door separately.

8' Long x 3' Tall Concession Window w/Screen

With slider glass & screen, must also purchase concession door separately.

8' Long x 4' Tall Concession Window w/Screen

Must also purchase concession door separately

10' Half Wall Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

This converts rear space of trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

10' Open Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

12' Open Porch W/12” on center cross members and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

14' Open Porch W/12” on center cross members and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

16' Open Porch W/12” on center cross members and ATP Flooring (requires adding double 8” main frame option to trailer)

Must purchase side rails separately if desired. This converts the rear space of a trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

36” Tall Railing On 12' or Longer Open Porch W/36” Gate Door

Purchase this to add railing and a walk thru gate on any separate open rear porch you order, on 12' long or longer porch.

36” Tall Railing On Up to 10' Open Porch W/36” Gate Door

Purchase this to add railing and a walk thru gate on any separate open rear porch you order, up to 10' long.

5' Slide-in Rear-Aluminum Load Ramps on Hybrid Models (ILO 4' Ramp Gate)

If you want 5' slide-in load ramps instead of the standard 4' tall expanded metal load ramp rear gate on any hybrid model.

6' Half Wall Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

6' Open Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

8' Half Wall Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

8' Open Porch W/12” on center crossmembers and ATP Flooring (requires adding double 8” main frame option to trailer)

Converts rear of trailer, does not add length. Must purchase side rails separately if desired. NOTE: Requires purchase of ”Double 8” Main Frame Option Upgrade on Trailer Size You Choose. Rear Porch Capacity: Max of 1500 lbs on very rear of trailer porch, max of 3500 lbs up next to enclosed box area.

Double 8” Main Frame Upgrade (required on all rear porch models) $40 PLF

This is a required option on all trailer sizes with a back porch custom build purchase. Price is calculated at per linear foot x the length of the overall trailer you are ordering, not just the back porch size, because the entire trailer frame must be 8”.

Hybrid Open Rear Deck Conversion -7',8' or 8.5' Wide Models Up to 24' Long

This option converts from enclosed to open deck on any 7', 8', 8.5' wide model, choose your trailer length up to 24', then add this option to convert your choice length on the rear to an open deck with a steel mesh ramp load gate. Floor is 3/4 plywood. Double barn rear locking doors on enclosed area are included. (Note: Upgrade to 2” x 6” board floor on open deck as a separate purchase, if desired)

Hybrid Open Rear Deck Conversion-8.5' Wide Models 26' Long and Up

For trailers 26' or longer'. Add this option to convert your choice length on the rear to an open deck with a steel mesh ramp load gate. Floor is 3/4 plywood. Double barn rear locking doors on enclosed area are included. (Note: Upgrade to 2” x 6” board floor on open deck as a separate purchase, if desired)

Upgrade Rear Porch or Hybrid Open Rear Deck to 2” x 6” Treated Boards ($18 Per Foot of Deck)

Add this if you also purchase either a rear porch or the Hybrid open rear deck conversion option and want to upgrade from the standard 3/4” plywood to 2” x 6” board deck on the open section. Add to cart, then change quantity to how many feet long your open deck area will be.

36” Ramp Door Flap W/ ATP Supports and 3” Bumpers and Double Spring Assist on Ramp Door

Upgrades from standard 16” flap and adds double spring assist on ramp door.

4' Ramp Door In V-Nose W/ 2' Extended V-Nose

Includes longer V-nose required for door

4' Ramp Door On Side of Trailer

Placed in your choice location

5' Ramp Door in V-Nose W/ Extra Extended V-Nose and 110” Draw Bars

Has longer V nose and extended tongue to fit door

5' Ramp Door On Side of Trailer

Placed in your choice location.

54” x 48” Escape Door W/RV Style Flushlock

Your placement. Generally used with 8.5 wide models, normally over fender wells.

Access Door 12” x 12” (with key lock)

Add this to any trailer side location.

Access Door 36” x 24” (with key lock)

Add this baggage access door anywhere in the side of the trailer.

Add 24” Side Door W/ RV Style Flushlock

Usually added on a 5 wide that doesn't come standard with a side door, but can be added to any width model, your location  choice.

Add 32” Side Door W/ RV Style Flushlock

This adds an extra door, your location choice

Add 32” x 68” RV Door W/Screen and Window

Requires model with at least 75” (6'3”) inside height. Adding the complete door unit, not upgrading.

Add 36” Side Door W/RV Style Flushlock

This adds an extra door, your placement choice.

Add 36” x 78” RV Door W/Screen and Window

Requires at  least 84” (7') Inside height. Adding the complete door unit, not upgrading.

Add 48” Side Door W/RV Style Flushlock

This adds an extra door to any model, your location choice

Add 48” x 78” RV Door W/Screen and Window

Requires minimum 84” (7') Inside Height. Adding the complete door unit, not upgrading.

Add a 60” x 78” Double Side Door

This is an extra door purchase

Add a 72” x 78” Double Side Door

This adds a new door, your location choice

Add a Barlock On Any Side Door for padlock

Adds a swing away bar lock to any side door. All models with side doors come standard with a RV style flush key lock.

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models Over 7' Inside Height)

For any width model with ”over” 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models up to 7' Inside Height)

For any width model up to 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

Barn Doors on Rear In Lieu of Standard Ramp Rear Door (Free Change)

No Charge change. Just add this option to your cart if you want double barn swing rear doors. Note: 4' wide models are standard with one swing barn rear door. This is a change for any 5' 6', 7', 8, 8.5 wide model from standard ramp door to double barn doors with bar lock and hasp.

Black and White Vinyl or ATP or RTP on Rear Ramp Door and Flap

Your choice of black & white checkered vinyl, aluminum tread plate or black rubber tread plate covering. Any width trailer.

Double 3/4” Plywood on Rear Ramp Door (standard height models)

Double the 3/4” plywood on the rear ramp door on any standard height model. Makes rear door heavier. On 8' or 8.5 wide models it is highly recommended to also add the double spring assist on the ramp door. (Double spring assist not available on models smaller than 8' wide)

Double Spring Assist On 8' or 8.5' Wide Ramp Door-(Required on all with 18” Extra Height or Taller)

Must add on any 8' wide or 8.5' wide trailer that has 18” or more extra height added. This double spring assist comes standard on the 7,000 lb super duty ramp door upgrade.

Rear Ramp Door Winch w/12V Battery (Required If Ramp Door Height Needed is Over 7'6”)

Ramp doors come standard up to an 8' inside height trailer, (ramp door opening will be about 7'6”). This is as tall as any standard ramp door can go, unless you want to extend the ramp door opening height taller, then you must add this door winch because the door is too heavy to raise & lower manually. Winch is ceiling mounted with cable that hooks to ramp door. Comes with 12V battery.

Refrigeration Strips on Ramp Door

Add on any ramp door

Refrigeration Strips on Side Door

Add on any side door. Clear walk through strips for use to keep cool air in with door open.

RV Pull-Out Step on any side door

Installs under any side door

Side Door Extra 10” Height-6' or 7' Wide Models (Requires adding at least 9” extra height to trailer)

Side door height is 68” on 6' and 7' wide standard height models. If adding at least 9” extra height to your trailer and you want the side door to be 10” taller to 78”, add this option.

Side Door Extra 6” Height-6' or 7' Wide Models (Requires adding at least 6”extra height to trailer)

Side door height is 68” on 6' and 7' wide standard height models. If adding at least 6”extra height to your trailer and you want the side door to be 6” taller to 74”, add this option.

Side Door Extra 6” Height-8' or 8.5' Wide Models (Requires adding at least 6” extra trailer height)

Standard height on side door is 78” on all 8' or 8.5' wide models. If you are adding at least 6” extra height to your trailer and want to increase the side door height to the maximum of 84”, add this option.

Steel Transition Flap to cover Ramp Door Hinges (door to floor)

Helps with smoother roll over from ramp door to trailer floor area.

Upgrade 8' or 8.5 Wide to Super Duty Ramp Door (7000 lb. Capacity) Includes Double Spring Assist-Center Jacks)

Upgrades from standard ramp door and comes with the required double spring assist. (Available only on 8' or 8.5 wide models). Includes pair of drop leg jack stands on center sides of door.

Upgrade from Standard 32” Side Door to 36” Side Door

Upgrade any trailer size with standard 32” side door to a 36” side door

Upgrade from Standard 32” Side Door to 48” Side Door

Upgrade any trailer size with standard 32” side door to a 48” side door

Upgrade from Standard 36” Side Door to 48” Side Door

Upgrade any trailer size with standard 36” side door to a 48” side door

Upgrade to 32” x 68” RV Door W/Screen and Window

Upgrades from a standard 32” side door

Upgrade to 36” x 78” RV Door W/Screen and Window

Requires minimum 84” (7') Inside Height. Upgrades from a standard 36” side door

Upgrade to 48” Ramp Door Flap W/ ATP Supports and 3” Bumpers and Double Spring Assist on Ramp Door

Upgrade from standard 16” wood flap on ramp door

Upgrade to 48” x 78” RV Door W/Screen and Window

Requires minimum 84” (7') inside height. Upgrades from any standard side door

Upgrade to 60” x 78” Double Side Door In Lieu of Standard Door

This upgrades from any size standard side door

Upgrade to 72” x 78” Double Side Door In Lieu of Standard Side Door

Upgrade from any size standard side door

Upgrade to EXTRA WIDE 95-1/2” Rear Ramp Door Opening (8.5 Wide Models Only)

Select this option to have the rear framework modified to make the rear ramp door opening the maximum width of approximately 95-1/2” which is  4” wider than the standard 91-1/2” width. For 8.5 wide models only.

Upgrade to Heavy Duty Ramp Door w/flap (4500 lb. Capacity)

Upgrade from standard 2,000 lb capacity ramp door to heavy duty 4,500 lb capacity ramp door w/16” flip flap on ground end. 7 wide and larger (this door comes standard on 8.5 wide models)

Upgrade V-Nose to 4' w/Extra Long 72” Triple Tube Tongue, 4' Ramp in V

From standard V nose this option upgrades to 4' V nose, (very pointed) with a 4' ramp door in the V-nose, includes upgrade to extra long extended triple tube tongue. For 7' wide or wider models only.

Upgrade V-Nose to 5' w/Extra Long 72” Triple Tube Tongue, 5' Ramp in V

From standard V nose this option upgrades to 5' V nose, (very pointed) with a 5' ramp door in the V-nose, includes upgrade to extra long extended triple tube tongue. For 8' or 8.5' models only.

'Recessed 12V Battery Storage Compartment (6” or 8” Frame Models Only)

Add this if you also purchase a 12V battery for inside 12V power and want to recess the battery in the floor.

110 Volt 12” x 24” Recessed LED Side Mount Ceiling Lights

These are recessed at top of side wall and ceiling. Note: Must order electrical package or at a minimum a breaker box for these to be wired by factory.

110 Volt 15 AMP Wall Receptacle

Add per each receptacle. Not wired unless you also purchase a breaker box or electrical package with breaker box

110 Volt 20 Amp Recepts (Each)

Add per receptical

110 Volt 500 Watt Recessed Quartz Exterior Light

110 Volt GFI Recepts (Interior or Exterior)

Add per each receptacle. Your choice placement. Not wired unless breaker box or electric package is also purchased.

110 Volt to 12 Volt Converter 45 Amp DC

Must purchase any electrical package or breaker box separately.

110 Volt Wall Switch

110V Wire Stubbed Out Only-For Your Item Install (each stub)

Choose this to have a 110V wire stubbed out to your inside location for your later installation of your 110V item. (must also purchase at least a breaker panel box)

12 Volt LED Angled Surface Mount Exterior Light

Your choice outside placement. (Must add 12V power supply separately if desired)

12 Volt LED Loading Light (each)

Per each LED loading light. Update desired quantity in cart

12 Volt LED Porch Light

Installed outside near side door, with switch

12 Volt Wall Switch

Add if you also want a wall switch to operate inside dome light that comes standard with switch on the light. Your placement choice.

12” Recessed Exterior 12V LED Flood Light Bar w/Switch

Your placement choice on exterior. Must add 12V battery separately to be powered when not plugged in to vehicle

125 AMP Electric Panel Box Only W/Lifeline and Cable Hatch

Add this for electrical service. Your placement choice inside trailer. Includes HD 50 AMP Lifeline Chord

12V LED 24” Long x 6” Wide Interior Light

This is available in 12V only. Installed at your location choice in trailer. Purchase 12V battery power supply separately if desired.

12V Power Supply On Board (Battery in Box)

Add this to have 12V power supply wired to whatever 12V items you choose. Battery trickle charges when trailer is plugged to vehicle. Installed inside front of trailer.

12V to 110V Power Inverter w/12V Battery in Box-1600 Watt

Gives you 110V power  plugin inside your trailer. 1600 watt (16 AMP) power inverter with 12V battery and battery storage box, installed inside trailer.

12V to 110V Power Inverter w/12V Battery in Box-3000 Watts

Gives you 110V power  plugin inside your trailer. 3000 watt (30 AMP) power inverter with 12V battery and battery storage box, installed inside trailer.

12V Wire Stubbed Out Only-For Your Item Install (each stub)

Choose this to have a 12V wire stubbed out to your inside location for your later installation of your 12V item.

220 Volt Interior Recepts (Must give correct configuration of plug)

30 AMP Electric Panel Box Only W/Lifeline and Cable Hatch (not usable with an A/C)

Can not be used on models that have an A/C unit added. (Must buy minimum 50 AMP service). Add this for electrical service. Your placement choice inside trailer.

30 Amp Motor Base Plug

To connect shore power. Not wired unless you purchase an electric breaker box or electrical package.

4' Fluorescent LED Lights (Each)

LED light. Note: Two of these lights are included in all electrical packages. Not wired unless you also purchase at least the electric panel box.

50 AMP Electric Panel Box Only W/Lifeline and Cable Hatch

Add this for electrical service. Your placement choice inside trailer. Includes HD 50 AMP Lifeline Chord

50 Amp Lifeline Cord (25' long) (Loose)

50 Amp Motor Base Plug

To connect shore power. Not wired unless you also purchase a breaker box or an electrical package.

Additional 12 Volt LED Interior Dome Light (each)

Add an additional LED 12V  inside dome light. (All trailers come standard with one regular non-LED dome light)

Electric 3500# Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer. Includes 12V electric 3500 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Electric 9000# HD Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer with at least 5200 lb axles. Includes 12V electric 9000 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Extra 12V LED Side Marker Lights-Top or Bottom (Your Choice Location)

Must purchase in multiple of 2 (one in same location on each side). Add as many extra marker lights to sides of any width model. Can be added to top or bottom of trailer sides. Tell us your requested locations in your checkout notes.

Extra Electric Cable Floor Drop Thru Hatch

Add this if you need an additional floor drop hatch for electric cable. Your location choice.

Generator Prep Package (Outside On Tongue) Includes 60” Triple Tube Extended Tongue

Includes: ATP Generator Box w/lid, the extended  60”  Triple Tube Tongue. You specify size of box needed to fit your generator.

Generator Prep Pkg (Inside Trailer) With Vented Door

Includes: 36” x 36” Generator Access Door w/vent, Interior Generator Compartment, and Generator Slider Tray.

Pair of LED Brake/Blinker Side Lights (8' or 8.5' Wide Models Only)

This adds one brake/blinker stop/turn signal light on each side on any 8' or 8.5' wide model for extra visibility. Normally placed just in front of axles on each side of trailer.

Upgrade Any Single Axle Model from Standard 4 pin to 7 pin Wiring Harness/Plug Only

A 7 pin wiring harness/plug is required on any trailer if adding back up lights. (This harness/plug is standard on all models with electric brakes).

Upgrade to 110 Volt 20 Amp Recept In Lieu of Standard 15 Amp included in an Electrical Package

When you purchase any electrical package. This is an upgrade charge to upgrade the two standard 15 AMP receptacles included in an electric package to 20 AMP

Upgrade to LED 12 Volt Dome Light from Standard Dome Light

All models come with one non-LED dome light. This upgrades the included standard dome light to an LED dome light

Complete 110 Volt 125 AMP Electrical Package w/LED Lights

Includes: Panel Box  capable up to 100 AMP  W/HD 50 AMP Lifeline Chord/Plug & Floor Cable Hatch, (2) 110 Volt Interior Wall Recepts, and (2) 4' LED Fluorescent Lights W/ Light Switch.

Complete 110 Volt 30 AMP Electrical Package w/LED Lights

Includes: 30 AMP Electrical Panel Box W/Lifeline & Floor Cable Hatch, (2) 110 Volt Interior Wall Recepts, and (2) 4' LED Fluorescent Lights W/ Light Switch. Includes 30 AMP Lifeline Chord/Plug.

Complete 110 Volt 50 AMP Electrical Package w/LED Lights

Includes: Panel box capable of 50  AMP W/Lifeline & Floor Cable Hatch, (2) 110 Volt Interior Wall Recepts, and (2) 4' LED Fluorescent Lights W/ Light Switch. Includes HD 50 AMP lifeline chord/plug.

Stereo System w/(6) Speakers (4 Inside, 2 Outside)

NOTE: You must also order overhead cabinets when ordering the stereo package option. Electric breaker box  or electrical package is also an additional option required if you want power wired to stereo.

Back-Up Lights (LED) One Pair

Note: Only available on models standard with electric brakes and 7 pin wiring harness or you much also purchase a 7 pin harness upgrade separately.

Dual Tail-Lights (LED) (Pair)

Adds an extra set of rear LED tail lights to any model.

Extra Clearance Lights (LED) (Each)

Add extra side clearance lights. Amber or red depending on location you want. Red on center to rear, amber on center to front.  Minimum 2 of same color.

Side Turn Blinker Lights (Pair)

For any model, mounted on sides. Adds more visibility of trailer when turning.

Upgrade Any Single Axle Model from Standard 4 pin to 7 pin Wiring Harness/Plug Only

A 7 pin wiring harness/plug is required on any trailer if adding back up lights. (This harness/plug is standard on all models with electric brakes).

100 lb. Propane Tank Aluminum Cage (Each)

Cage only. Tongue mounted, flat front models only. Or rear mounted as shown. (Two cages pictured as example)

24” Tall Anodized (Smooth) Aluminum Down Sides and Across Rear ($16 per linear foot)

Adds to any width model.

24” Tall ATP Down Sides and Across Rear ($16 per linear foot)

Adds to any width trailer. Calculated at $16 x length of trailer.

24” Tall Colored Metal Down Sides and Across Rear ($20 per linear foot)

Your choice any of the 6 standard colors. Calculated at per foot  x length of any trailer

Anodized (Smooth) Metal or ATP Metal to Front and Rear Corners

Add this vertical 4 corner trim to any width trailer. Specify your choice anodized or ATP in your checkout notes. (Smooth anodized corners are standard on front corners only, if you order a flat front trailer, not standard on V-nose models)

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models Over 7' Inside Height)

For any width model with ”over” 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

Anodized (smooth) or ATP (tread plate) Aluminum On Full Rear Door Exterior (Models up to 7' Inside Height)

For any width model up to 7' inside height. Your choice of smooth anodized aluminum or aluminum tread plate on the full rear door, ramp or double door model.

Cast Aluminum Front and Rear Corners w/Anodized Insert Front Cap (Flat Front 8.5 Wide Only)

Only available on flat front 8.5 wide models

Cover Tongue w/3/4” Plywood and ATP

For a mounting area. Flat front models, or on V-nose models you will need to add the upgrade to the extended tongue.

Flat Front In Lieu of Standard V-Nose Front (Free Change)

V-Nose front with the ATP nose plate is standard on all models. Add this no charge option to convert your trailer to a flat nose front with smooth aluminum corners instead of the standard V-Nose front. This is a FREE change option.

Full Blackout Trim Package (With any Color Side Metal)

For any size model. Includes: Black Trim, Black ATP Stoneguard, Black ATP Up V-Nose, Smooth Black Fenders, Black Screws, and Black Steel Wheels. Can be used with black or any other color side metal you choose. (On RV Door/Screen upgrades door trim will be aluminum finish, not available in black)

Harley Davidson Decals 3 Set Total (Each Side and Rear)

Can be used on one color or two color combo trailer. Decals available in black/orange or black/silver, your choice.

Red and White DOT Reflector Tape ($10 Per Linear Foot)

Installed on side bottom rail. Calculated at x total linear foot of any width trailer

Slant Top Roof Upgrade on a V-Nose Model

By slanting the roof top down on  V-nose, it assists in aerodynamics of air flow over trailer. Slat top portion covered in ATP.

Upgrade Any Single Axle Model to ATP Fenders

Upgrades a single axle model from standard smooth aluminum to aluminum tread plate (ATP) fenders.

Upgrade Any Tandem Axle Model to ATP Fenders

Upgrades any tandem axle model from standard smooth aluminum to aluminum tread plate (ATP) fenders. (fender skirts on 8' & 8.5' models)

Upgrade From Standard Free Color .024 Thickness Metal to .080 PolyCore Backed Aluminum ($20 per linear foot) Black or White ONLY!

PolyMetalTM is a flat, durable and moisture resistant Class A fire-rated panel. Upgrades from the standard free .024 thickness standard aluminum metal colors. If you want to have the thicker PolyCore PolyMetal exterior, the metal is adhered to a poly core backing. This gives the smoothest finish with the least amount of waviness in the metal during expansion and retraction with temp changes. Calculated at per foot x length of trailer.

Upgrade From Standard Free Color .024 Thickness to .030 Exterior Aluminum ($15 per linear foot)-Recommended (LTF)

We recommend this upgrade on any trailer with the standard free .024 thickness standard color if you want to add thicker stronger metal, and to help reduce waviness look of metal during temp changes (especially darker colors). Calculated at per foot x length of trailer.

Upgrade Gooseneck Model From Flat to V-Nose Front

Upgrade from the standard flat front to a V-nose front on any gooseneck model

Upgrade to .040 Exterior Aluminum -White or Black Only-Up to 7'6” Interior Height-($25 per linear foot)

Choose for  7'6” interior height or shorter models. Calculated per foot x length of trailer.

Upgrade to .040 Exterior Aluminum (White or Black Only) 8'0” interior height or taller ($35 per linear foot)

Choose for 8' interior height or taller models. Calculated at per foot x length of trailer.

Upgrade to 3” Bottom Trim In Lieu of Standard ($10 per linear foot) Comes on 8.5 Wides

Calculated per foot x length of trailer. Note: This 3” bottom trim size comes standard on all 8.5 wide models.

Upgrade to 4' Tall ATP Rock Guard (Straight Across or Angle Cut)

Upgrade from standard  2' tall Aluminum Tread Plate (ATP) rock guard to 4' tall rock guard. (Can be angle cut if requested).

Upgrade to Black ATP Stoneguard Only (24” High) on Front

Instead of aluminum ATP. V-nose or flat front model. (If V-nose you must also purchase black vertical nose plate upgrade to match, if desired)

Upgrade to Black ATP Vertical Plate Up V-Nose

Instead of aluminum ATP

Upgrade to Riveted Exterior Metal (ILO Semi-Screw-less) ($25 Per Linear Foot)

Exterior metal is riveted (not semi-screwed) at every joining metal seam (approx every 4')  then hi-tech adhesive is used to attach metal to all other wall posts. Calculated per foot x length of trailer.

Upgrade to Smooth Screw-less Exterior Metal ($20 Per Linear Foot)

NOT AVAILABLE WITH POLYCORE METAL UPGRADE. Upgrades from the standard semi-screw less to fully screw less. Exterior metal is attached using a hi-tech adhesive to all wall posts. Calculated per foot x length of trailer. NOT recommended in real hot or real cold temp areas and not warranted to stay adhered.

Wing Rear Top w/3-LED Exterior Lights/Switch (Fits Any Width Model With at Least 12” Extra Height Added)

Add this custom rear wing on any width model, but it reduces the height of the rear door opening. Requires at least 12” extra height added over standard height.

12” Tall 3/4” Plywood Kickplate on Walls ($12 per linear foot)

Adds a 12” high 3/4” plywood kick plate on walls. Calculated at per foot x length of trailer, any width model.

12” Tall ATP, Black or Silver RTP Kickplate on Walls ($12 per linear foot)

Adds a 12” high interior walls kick plate in either aluminum, or black or silver rubber tread plate. Calculated at $12 per foot x length of trailer, any width model. Specify choice in checkout notes.

18” Wide ATP Tire Runners (Pair) Aluminum ($14 per linear foot)

Aluminum tread plate. One each side (pair). Calculated at per foot x length of trailer. 8.5 wide models.

24” Tall 3/4” Plywood Kickplate on Walls ($15 per linear foot)

Adds a 24” high kick plate of 3/4” layer of plywood. Calculated at per foot x length of trailer, any width model.

24” Tall ATP, Black or Silver RTP Kickplate on Walls ($15 per linear foot)

Adds a 24” high kick plate of either aluminum tread plate, or black or silver rubber tread plate. Calculated at $15 per foot x length of trailer, any width model. Specify choice in checkout notes.

24” Wide ATP Tire Runners (Pair) Aluminum ($16 per linear foot)

Aluminum tread plate. Includes one each side (pair). Calculated per foot x length of trailer. 8.5 wide models.

Aluminum Tread Plate Flooring ($26 per linear foot)

Aluminum tread plate floor. Calculated at $26 per foot x length of trailer. Any width. (purchase E-track in photo separately, if desired). Does not include ATP on ramp door, purchase separately if desired.

ATP Covered Wheelboxes (Tandem Axle) Aluminum

Covers interior wheel well boxes on 8' or 8.5' wide models

ATP Covered Wheelboxes (Triple Axle) Aluminum

Covers interior wheel well boxes on 8' or 8.5' wide models

Black and White Vinyl or ATP or RTP on Rear Ramp Door and Flap

Your choice of black & white checkered vinyl, aluminum tread plate or black rubber tread plate covering. Any width trailer.

Black Rubber Tread Plate Flooring ($26 per linear foot)

Black rubber tread plate floor. Calculated at $26 per foot x length of trailer, any width. (Does not include covering for ramp door & flap, must add separately if desired)

Black/White Vinyl Checkered Flooring ($26 per linear foot)

Floor covering (must add covering for ramp door and flap separately if desired). Calculated at $26 per foot x length of trailer, any width model.

Carpeted Sidewalls ($42 per linear foot)

Dark carpet on all walls floor to ceiling. Calculated at $42 per foot x length of trailer, any width model.

Double 3/4” Plywood Flooring ($28 per linear foot)

Double layer of 3/4” plywood for floor. Calculated at per foot x length of trailer, any width model.

Double 3/4” Plywood on Rear Ramp Door (standard height models)

Double the 3/4” plywood on the rear ramp door on any standard height model. Makes rear door heavier. On 8' or 8.5 wide models it is highly recommended to also add the double spring assist on the ramp door. (Double spring assist not available on models smaller than 8' wide)

Floor Insulation ($18 per linear foot)

Calculated at $18 a foot x length of trailer, any width model.

Indoor/Outdoor Carpet on Floor ($26 per linear foot)

Dark indoor/outdoor carpet floor covering. Calculated at $26 per foot x length of trailer. Any width.

Silver Rubber Tread Plate Flooring ($28 per linear foot)

Silver rubber tread plate floor. Calculated at $28 per foot x length of trailer. Any width. Does not include covering ramp door, purchase separately if desired.

Steel Ramp Over Wheel Wells w/ATP or RTP Covering-24” wide x 16' Long

Ramp over interior wheel wells. Steel frame topped with plywood. You choice aluminum tread plate or rubber tread plate covering. 8.5 wide models.

Steel Ramp Over Wheel Wells w/ATP or RTP Covering-24” wide x 18' Long

Ramps over interior wheel wells. Steel frame topped with plywood. Your choice of aluminum tread plate or rubber tread plate covering. 8.5' wide models

Steel Ramp Over Wheel Wells w/ATP or RTP Covering-24” wide x 20' Long

Steel frame topped with plywood. Your choice aluminum tread plate or rubber tread plate covering on ramp over interior wheel wells-8.5 wide models.

Upgrade Floor to 1/8” Diamond Plate Steel on Any Width Model ($75 per linear foot)

This upgrades from the standard 3/4” plywood to 1/8” diamond plate steel floor. No plywood on floor. Price is calculated per linear foot.

Upgrade to 3/4” Pressure Treated Plywood Floor ($17 per linear foot)

In Lieu of Standard non-pressure treated Plywood Floor. Calculated at per foot x length of trailer, any width model.

Upgrade to Double 3/4” Pressure Treated Plywood Flooring ($39 per linear foot)

Double layer of pressure treated 3/4” plywood flooring. Calculated at per foot x length of trailer, any width model.

'Recessed 12V Battery Storage Compartment (6” or 8” Frame Models Only)

Add this if you also purchase a 12V battery for inside 12V power and want to recess the battery in the floor.

12” On Center Floor Crossmembers (24' Trailer and Smaller)

Every 12” Floor Brace members-(standard is 16” on all tandems) on 24' and shorter models

12” On Center Floor Crossmembers (26' Trailer and Larger)

Every 12” Floor Brace members-(standard is 16” on tandem axles) on 26' and longer models

12” On Center Roof Bows (Any Length)

Tubing roof bow members every 12”-any length

12” On Center Wall Post (24' Trailer and Smaller)

Tubing wall posts every 12”-on 24' and shorter models

12” On Center Wall Post (26' Trailer and Larger)

Tubing wall posts every 12”-on 26' and longer models

16” On Center Floor Crossmembers (Up to 7 x 14 Single Axle)

Every 16” Floor Brace members-(16” is standard on all tandems)

16” On Center Roof Bows (Any Length)

Tubing roof bows every 16”-any length.

60” Extended Triple Tube Tongue (6” Main Frames and Smaller) For 24' and shorter models

Adds about 16” additional length to tongue. Any size up to 8.5 x 24 and smaller models

60” Extended Triple Tube Tongue (8” Main Frames) For 26' and longer models

Adds about 16” additional length to tongue. For any size 8.5 x 26 and larger models

72” Extended Triple Tube Tongue (6” Main Frames and Smaller) For any 24' or shorter model

Adds about 25” to 28” additional length to standard tongue length depending on width. Any size up to 8.5 x 24 and smaller models

72” Extended Triple Tube Tongue (8” Main Frames) For 26' and longer

Adds about 28” additional length to standard tongue length. For any size 8.5 x 26 and larger models

Add 1/4” Steel Skid Plate Under Rear Corner Posts

Add this on any size trailer to help protect the corners of the rear in case they drag the ground.

Double 8” Main Frame Upgrade (required on all rear porch models) $40 PLF

This is a required option on all trailer sizes with a back porch custom build purchase. Price is calculated at per linear foot x the length of the overall trailer you are ordering, not just the back porch size, because the entire trailer frame must be 8”.

Flat Front In Lieu of Standard V-Nose Front (Free Change)

V-Nose front with the ATP nose plate is standard on all models. Add this no charge option to convert your trailer to a flat nose front with smooth aluminum corners instead of the standard V-Nose front. This is a FREE change option.

Framed Opening Welded In Trailer Side Wall-Your Location (For After-Market Use)

Framed opening is welded into the wall framework as close to your chosen location as possible. Plywood is cut out on inside, metal is over outside for customer to remove after-market, to install own A/C, etc. Must furnish us a drawing showing what size opening you desire and at what approximate wall location.

Removable/Detachable Tongue w/ 5000 lb Scissor Jacks (For Flat Front Models Only)

(Available only on flat front models). Complete tongue will remove and you have a pair of 5000 lb scissor jacks on front corners of trailer to support trailer weight when the tongue and standard tongue jack are removed. Ideal for short parking areas or for leaving your trailer on-site.

Slant Top Roof Upgrade on a V-Nose Model

By slanting the roof top down on  V-nose, it assists in aerodynamics of air flow over trailer. Slat top portion covered in ATP.

Steel Winch Plate

Welded to framework, normally centered inside front of trailer, but can be placed at your location. It is under plywood floor on frame for your after market winch installation.

Upgrade to 3” Tube Floor Cross Members ($18 per linear foot)

Upgrade from standard C-channel to 3” Tubing floor brace members. Calculated at $18 per foot x length of trailer, 5' or 6' wide models up to 14' long.

Upgrade to 4” Main Frame from 3” Main Frame ($15 per linear foot)

Upgrade any standard 3” mainframe model to 4”. Calculated at per linear foot x length of trailer

Upgrade to 4” Tube Floor Cross Members ($20 per linear foot)

Upgrade from standard C-channel to 4” tube floor brace members. Calculated at per foot x length of trailer, any 6', 7' wide models up to 14' long.

Upgrade to 6” Main Frame from 3” Main Frame ($20 per linear foot)

Upgrade any standard 3” mainframe model to 6”. Calculated at per linear foot x length of trailer

Upgrade to 6” Main Frame from 4” Main Frame ($18 per linear foot)

Upgrade any standard 4” mainframe model to 6”. Calculated at per foot x length of trailer

Upgrade to 6” Tube Floor Cross Members ($24 per linear foot)

Upgrade from standard C-channel to 6” Tube Floor Brace  members. Calculated at per foot x length of trailer, any width model.

Upgrade to 8” Main Frame ($26 per linear foot)

Note: 8” main frame comes standard on any trailer 8.5 x 26' and longer.  Upgrade any other size to 8” main frame calculated at per foot x length of trailer. This option is required with any water service package to allow room for water tanks under trailer.

Upgrade to 8” Tube Floor Cross Members ($52 per linear foot)

Upgrade from standard C-channel cross members to 8” tubing cross members. Calculated at per foot x length of trailer, any width model.

Upgrade to EXTRA WIDE 95-1/2” Rear Ramp Door Opening (8.5 Wide Models Only)

Select this option to have the rear framework modified to make the rear ramp door opening the maximum width of approximately 95-1/2” which is  4” wider than the standard 91-1/2” width. For 8.5 wide models only.

Upgrade to the Longer 2' V-Nose W/Longer Tongue (Any Width Model)

This extends the V-nose to a full 2' and extends the tongue to accommodate the longer V-Nose.

Upgrade V-Nose to 4' Long W/Extra Long 72” Triple Tube Tongue Included

From standard V nose this option upgrades to 4' V nose, (more pointed) includes upgrade to extra long extended 72” triple tube tongue. For 7 wide and larger models only.

Upgrade V-Nose to 4' w/Extra Long 72” Triple Tube Tongue, 4' Ramp in V

From standard V nose this option upgrades to 4' V nose, (very pointed) with a 4' ramp door in the V-nose, includes upgrade to extra long extended triple tube tongue. For 7' wide or wider models only.

Upgrade V-Nose to 5' Long W/Extra Long 72” Triple Tube Tongue Included

From standard V nose this option upgrades to 5' V nose, (very pointed) includes upgrade to extra long extended triple tube tongue. For 8' or 8.5' models only.

Upgrade V-Nose to 5' w/Extra Long 72” Triple Tube Tongue, 5' Ramp in V

From standard V nose this option upgrades to 5' V nose, (very pointed) with a 5' ramp door in the V-nose, includes upgrade to extra long extended triple tube tongue. For 8' or 8.5' models only.

03” Extra Height to 6' or 7'' Wide Trailer ($15 per linear foot)

Calculated per foot x length of trailer. Increases interior height from standard 6'3” to 6'6” ( 78” inside height) and the overall height.

06” Extra Height to Any Width Trailer ($18 per linear foot)

Calculated per foot x length of trailer. Increases interior and overall height.

09” Extra Height to 6' or 7'' Wide Trailer ($22 per linear foot)

Calculated per foot x length of trailer. Increases interior height from 6'3” to 84” (7'inside) and the overall height.

12” Extra Height to Any Width Trailer ($25 per linear foot)

Calculated per foot x length of trailer. Increases interior and overall height.

18” Extra Height to Trailer ($30 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Models. This much extra height it is required to upgrade to at least .030 thicker exterior metal. 18” extra height calculated per foot x length of trailer.

24” Extra Height to Trailer ($36 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Models. This much extra height it is required to upgrade to at least .030 thicker exterior metal. 24” extra height calculated per foot x length of trailer.

30” Extra Height to Trailer ($49 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. This much extra height it s required to upgrade to at least the .030 thicker exterior metal. 30” extra height calculated per foot x length of trailer.

36” Extra Height to Trailer ($59 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. This much extra height it s required to upgrade to at least the .030 thicker exterior metal. 36” extra height calculated per foot x length of trailer.

42” Extra Height to Trailer ($65 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. This much extra height it s required to upgrade to at least the .030 thicker exterior metal. 42” extra height calculated per foot x length of trailer.

48” Extra Height to Trailer ($70 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. This much extra height it s required to upgrade to at least the .030 thicker exterior metal. 48” extra height calculated per foot x length of trailer.

54” Extra Height to Trailer ($75 per linear foot) *Requires other options

Also Requires adding the Double Spring Assist option for all 8' and 8.5' wide Ramp Door Models. This much extra height it s required to upgrade to at least the .030 thicker exterior metal. 54” extra height calculated per foot x length of trailer.

Double Spring Assist On 8' or 8.5' Wide Ramp Door-(Required on all with 18” Extra Height or Taller)

Must add on any 8' wide or 8.5' wide trailer that has 18” or more extra height added. This double spring assist comes standard on the 7,000 lb super duty ramp door upgrade.

Rear Ramp Door Winch w/12V Battery (Required If Ramp Door Height Needed is Over 7'6”)

Ramp doors come standard up to an 8' inside height trailer, (ramp door opening will be about 7'6”). This is as tall as any standard ramp door can go, unless you want to extend the ramp door opening height taller, then you must add this door winch because the door is too heavy to raise & lower manually. Winch is ceiling mounted with cable that hooks to ramp door. Comes with 12V battery.

Reduce the interior/total height of Any Size Trailer ($15 per linear foot)

Reduce the height of any width/length trailer to the interior height of  your choice. Calculated at per foot x length of trailer.

Wing Rear Top w/3-LED Exterior Lights/Switch (Fits Any Width Model With at Least 12” Extra Height Added)

Add this custom rear wing on any width model, but it reduces the height of the rear door opening. Requires at least 12” extra height added over standard height.

3/4” Plywood Walls ($30 per linear foot)

3/4” Plywood In Lieu of Standard 3/8” Plywood. Calculated at per foot x length of trailer, any width model.

3/4” Pressure Treated Plywood Walls ($39 per linear foot)

3/4” pressure treated in Lieu of Standard 3/8”untreated. Calculated at per foot x length of trailer, any width model.

3/8” Plywood Ceiling Liner ($20 per linear foot)

Same plywood as walls. Calculated at per foot x length of trailer, any width model.

Aluminum Ceiling Liner ($18 per linear foot)

Choose any of 6 standard color metal or mill (aluminum) finish. Calculated at $18 a foot x length of trailer, any width model.

Aluminum Composite Backed Ceiling Liner ($22 per linear foot) Black or White Only

Aluminum with thicker composite backing. Calculated at per foot x length of trailer, any width model. Must order composite wall panels separately to match composite ceiling, if desired. Available in Black or White only.

Aluminum Composite Backed Wall Panels ($30 per linear foot) Black or White Only

Aluminum composite backed thicker panels on walls. Black or white only, your choice. Ceiling composite panels to match walls must be purchased separately, if desired. Calculated at per foot x length of trailer, any width model.

Aluminum Tread Plate (ATP) Ceiling Liner ($21 per linear foot)

Aluminum tread plate (ATP) ceiling liner. Calculated at per foot x length of trailer, any width model.

Aluminum Tread Plate (ATP) Walls ($30 per linear foot)

Aluminum tread plate covered walls. Ceiling liner must be purchased separately, ramp door/flap covering must be purchased separately, if desired. Calculated at per foot x length of trailer, any width model.

Aluminum Walls ($26 per linear foot)

Aluminum covered walls, your choice any of the 6 standard metal colors or mill (aluminum) finish. Ceiling liner must be purchased separately, ramp door/flap covering must be purchased separately, if desired. Calculated at $26 per foot x length of trailer, any width model.

Ceiling Insulation ($10 per linear foot)

Calculated at $10 per foot x length of trailer, any width model.

Full Bathroom w/Shower and Full Water Service Package

Note: Requires minimum 7' Interior Height Trailer! Includes full water service package, shower, toilet, sink in base cabinet, 110V light w/switch, 110V power roof vent w/fan, 24” door and partition wall. (Must purchase 110V electrical panel box or complete electrical package separately, if desired).

Half Bath w/Full Water Service Package (No Shower)

Includes full water service package, toilet, sink in base cabinet, 110V light w/switch, 110V power roof vent w/fan, 24” door and partition wall. (Must purchase 110V electrical panel box or complete electrical package separately, if desired).

Loft/Shelf Front Storage On 2-Car Stacker Models ONLY (Per Foot)

Choose this to add a custom plywood loft/shelf on welded framework across the front wall of any 2-car stacker model trailer. Price is by the foot. Add to cart then change quantity to how many feet long you want the loft/shelf to extend back from the front of the trailer. Normally can be 3' to 6' long depending on the length trailer you order.

Metal Covered Work Table on Metal Legs (Per Foot)

Your choice 12”, 18” or 24” deep, aluminum covered 3/4 plywood w/metal trim, work table on aluminum legs, free standing in your location choice. Add to your cart then update quantity to desired total feet of table. List depth desired in checkout notes. (Minimum order of 4 ')

Raw Luan (plywood) Ceiling Liner ($12 per linear foot)

Woodtone finish Luan liner. Calculated at per foot x length of trailer, any width model.Our least expensive ceiling liner.

Shelf on Wall w/ 2” Lip Edge (By the Foot)

3/4” plywood shelving, 12” to 24” (your choice) deep trimmed with front lip edge, covered in metal. Attached and braced to wall in your designated location. Add to cart, then change quantity in cart to the desired length of shelving.  Price is per foot, minimum order of  4'.

Therma Cool Ceiling Sheath ($8 per linear foot) Helps Reduce Inside Heat

Gray insulative sheathing for the ceiling. (not the same as a ceiling liner or ceiling insulation). Smooth, thick proprietary fibrous board with laminated facers of .078” water resistant adhesive kraft paper on both sides. Installed between roof braces and metal roof to assist in insulation of trailer. Calculated per foot x length of trailer, any width model. Can be added with or without regular ceiling insulation.

Wall Insulation ($17 per linear foot)

All insulated walls. Calculated at $17 per foot x length of trailer, any width model.

White Vinyl Ceiling Liner ($14 per linear foot)

Calculated at $14 a foot x length of trailer, any width model.

White Vinyl Walls ($21 per linear foot)

White vinyl covering on all walls. (Ceiling liner must be purchased separately if desired). Calculated at $21 per foot x length of trailer, any width model.

10' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual size).

12' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual size).

3 Compartment Dish Wash Sink w/Faucet (No Backsplash or Drainboards)

NSF approved. No Back splash or Drainboards are included. No water supply or holding tanks, etc. Note: Must purchase water service and electrical package separately if desired.

3 Compartment Dish Wash Sink w/Faucet & Backsplash-No Drainboards

NSF approved. Includes 3 sinks and faucet with backsplash. No water or electrical supply included, you must purchase these separately if desired.

4' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual style/size).

6' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual style/size).

8' Vent Hood System

Not wired unless you purchase electrical AMP box or complete electrical package separately if desired. (Image may not be actual size).

Single Handwash Sink w/Faucet in 24” Cabinet

No water supply included unless you purchase separately.

Total Complete Water and Sinks Concession Package

Photo for illustration purposes only. Includes upgrade to 8” mainframe on models needed to accommodate this package. Package Includes: 3 Compartment Dish Wash Sink w/Faucet, Single Hand wash Sink w/Faucet, Large Water Package w/55 gal waste water holding tank w/dump valve, 43 gal fresh water tank, city water fill inlet, 110v water pump, 6 gal electric water heater, all plumbing, and the Base Cabinet for all sinks, fully installed and ready to use. (Does not include electrical, must purchase separately if desired))

Water Service Package Only-Installed With No Sinks or Cabinets (For Your Aftermarket Completion)

Note: 8.5 x 24 and smaller requires upgrade purchase of 8” mainframe to accommodate the holding tank/plumbing under frame. No sinks or cabinets included. Includes: 55 Gallon Waste Tank w/Dumpvalve, (mounted underneath frame) 43 Gallon Fresh Water Tank (mounted inside), City Water Fill Inlet, 110 Volt Water Pump, 6 Gallon Electric Hot Water Heater (inside), and all Plumbing stubbed out only,  for your aftermarket completion. No electrical (must be purchased separately if desired).

.024 Aluminum Covered Partition Wall (8' Long or Shorter)

Any standard color metal over plywood wall. (Must purchase a walk through door separately if desired)

3/8” Plywood Finish Partition Wall (8' Long or Shorter)

Must purchase a walk thru door separately if desired. Wall can be placed at your chosen inside location.

Add 24” Walk Thru Door W/ Flush Key Lock in Partition Wall

Choose this to add a 24” wide walk through door in a partition wall

Add 32” Walk Thru Door w/ Flush Key Lock in Partition Wall

Choose this to add a 32” wide walk through door in a partition wall.

Add 36” Walk Thru Door w/Flush Key Lock in Partition Wall

Choose this to add a 36” wide walk through door in a partition wall

Motorcycle Deluxe Hauler Package (Any 5' Wide Model)

Ready to Go-5' Wide Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, polished alloy with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 6' Wide Single Axle Model)

Ready to Go-6' Wide Single Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, polished alloy with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 6' Wide Tandem Axle Model)

Ready to Go-6' Wide Tandem Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock, polished alloy with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 7' Wide Single Axle Model)

Ready to Go-7' Wide Single Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock,  polished alloy with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 7' Wide Tandem Axle Model)

Ready to Go-7' Wide Tandem Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock,  polished allow with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 8.5' Wide Tandem Axle Model 26' to 32' Long)

Ready to Go-8.5' Wide Tandem Axle 26' to 32' Long. Package Includes: Pair rear stabilizer jacks, 2 extra  Floor D-Rings, Removable wheel chock, polished alloy with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 8.5' Wide Tandem Axle Model Up to 24' Long)

Ready to Go-8.5' Wide Tandem Axle Up to 24' Long. Package Includes: Pair rear stabilizer jacks, 2 extra Floor D-Rings, Removable wheel chock, polished alloy with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Motorcycle Deluxe Hauler Package (Any 8' Wide Tandem Axle Model)

Ready to Go-8' Wide Tandem Axle Package Includes: Pair rear stabilizer jacks, 6 Floor D-Rings, Removable wheel chock,  polished alloy with or without black inlay 15” wheels w/radials, Pair of 2-way adjustable sidewall vents, Your choice of 24” high anodized, ATP or standard colored metal down sides and across rear.

Race Basic Set-Up Complete Package For 8.5' x 20' or 24' (V-Nose or Flat Front Models)

Package includes: Upgrade to 5200 drop leaf spring axles with electric brakes, 6 lug wheels, 15” radials. Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, upgraded to .030 exterior metal in any standard free color, aluminum interior walls, white vinyl ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Race Basic Set-Up Complete Package For 8.5' x 26' or 28' (V-Nose or Flat Front Models)

Package includes: Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, upgraded to .030 exterior metal in any standard free color, aluminum interior walls, white vinyl ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Race Custom Set-Up Complete Package For 8.5' x 20' or 24' (Flat Front Models Only)

Package includes: Upgrade to 5200 drop leaf spring axles with electric brakes, 6 lug wheels, 15” radials. Cast front corners w/anodized insert cap and  larger 4” top trim. Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, upgraded to .030 exterior metal in any standard free color, aluminum interior walls, white vinyl ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Race Custom Set-Up Complete Package For 8.5' x 26' or 28' (Flat Front Models Only)

Package includes: Cast front corners w/anodized insert cap and  larger 4” top trim. Straight across front base and overhead cabinets with 3/4”composite gray counter top, 50 AMP full electric package upgraded to 4' LED lights, with one exterior GFI recept, two 12V surface mount angle lights w/switch, two 12V LED dome lights w/switch, two 12V LED loading lights on rear header w/switch, 12V electric tongue jack w/battery. 54” x 48” escape door with key lock, upgraded to .030 exterior metal in any standard free color, aluminum interior walls, white vinyl ceiling liner, rubber treadplate or vinyl floor and on rear ramp door and flap, 60” extended triple tube tongue, one piece aluminum roof.

Ladder for Roof Access (Removable)

Aluminum ladder attaches to front or side (Cannot attach to side on 8' or 8.5' wide models, only on front)

Ladder for Roof Access (Stationary)

Aluminum attached to front or side (Cannot attach to side on 8' or 8.5' wide models)

Ladder Racks-Aluminum (Per Arm Section)

Requires minimum of 2 arms. Each arm rated max 200 lbs capacity. Add to cart then set your quantity. Can be mounted at your location choice.

Ladder Racks-Mounted Cut Down Lower to Roof (Per Arm Section)

These racks are cut down to reduce height as low as possible to top of trailer for easier loading/unloading. Requires minimum of 2 arms. Each arm rated max 200 lbs capacity. Spaced at your choice location. Add to cart then set your quantity.

Observation Deck 12' Long w/Fold Down Rails, Gate, Exterior Ladder, Walk-on Roof ($140 PLF of Trailer)

Includes: Full trailer walk on roof for the entire length of the trailer, plus 12' long roof mounted observation deck with rails that fold up/down, walk thru gate, exterior ladder. Only available on any length 8' or 8.5 wide model. Perfect for race day! Price calculated at per foot x overall trailer length.

Observation Deck 8' Long w/ Fold Down Rails, Gate, Exterior Ladder, Walk-on Roof ($120 PLF of Trailer)

Includes: Full trailer walk on roof for the entire length of the trailer, plus 8' long roof mounted observation deck with rails that fold up/down, walk thru gate, exterior ladder. Only available on any length 8' or 8.5 wide model. Perfect for race day! Price calculated at per foot x overall trailer length.

One Piece Aluminum Roof ($20 per linear foot)

No seams, all aluminum. Calculated at per foot x length of trailer-Any width model. (Not always available)

Slant Top Roof Upgrade on a V-Nose Model

By slanting the roof top down on  V-nose, it assists in aerodynamics of air flow over trailer. Slat top portion covered in ATP.

Walk on Roof Package ($50 PLF)

Includes: 12” On Center Tubular Roof Bows, 3/4” Plywood in Roof, and One Piece Aluminum Roofing. Calculated at per foot x length of trailer you are ordering. Must be on entire length of trailer.

Walk on Roof Package w/Fold Down Metal Covered Roof Panels ($120 PLF)

Includes: 12” On Center Tubular Roof Bows, 3/4” Plywood in Roof, and One Piece Aluminum Roofing, Fold up/down metal covered rail 24” or 36” tall all around the top, both sides, both ends . Calculated at per foot x length of trailer you are ordering. Must be full length of trailer.

Walk on Roof Package w/Fold Down Open Rails, Gate ($80 PLF)

Includes: 12” On Center Tubular Roof Bows, 3/4” Plywood in Roof, and One Piece Aluminum Roofing, Fold down railing and walk thru gate. Calculated at per foot x length of trailer you are ordering. Must be full length of trailer.

12” x 12” Aluminum Utility Door (Fuel Door)

Your location choice. Locking door.

36” x 24” Baggage Doors

Installed in your choice location. Locking door.

36” x 24” Generator Door Only W/Vent

Your choice location. Access door only.

36” x 36” Baggage Door

Your location choice. Locking door.

36” x 36” Generator Door Only W/Vent (Included w/Inside Gen. Prep Package)

This door can be purchased separately, or it is included if you purchase the Inside Generator Prep Package.

40” x 32” Generator Door Only W/Vent

Your choice location. Door only.

48” x 36” Baggage or Escape Door

Your location choice. Locking door.

Generator Prep Package (Outside On Tongue) Includes 60” Triple Tube Extended Tongue

Includes: ATP Generator Box w/lid, the extended  60”  Triple Tube Tongue. You specify size of box needed to fit your generator.

Generator Prep Pkg (Inside Trailer) With Vented Door

Includes: 36” x 36” Generator Access Door w/vent, Interior Generator Compartment, and Generator Slider Tray.

”Bulldog” 2-5/16” Coupler in Lieu of Standard 2-5/16” Coupler

Upgrades the coupler style on all tandem axle models with 2-5/16” standard coupler.

”Bulldog” 2” Coupler In Lieu of Standard 2” Coupler

Upgrades the coupler style on all single alle models with 2” standard coupler

12 Volt Electric Tongue Jack W/Battery (Upgrade)

Includes separate 12V battery in box. (Picture may not be exact style)

2-5/16” Coupler in Lieu of Standard 2” Coupler

Choose this to upgrade single axle model from a standard 2” ball coupler to a standard 2-5/16” ball coupler

5000 lb. Scissor Jacks (Pair)

60” Extended Triple Tube Tongue (6” Main Frames and Smaller) For 24' and shorter models

Adds about 16” additional length to tongue. Any size up to 8.5 x 24 and smaller models

60” Extended Triple Tube Tongue (8” Main Frames) For 26' and longer models

Adds about 16” additional length to tongue. For any size 8.5 x 26 and larger models

72” Extended Triple Tube Tongue (6” Main Frames and Smaller) For any 24' or shorter model

Adds about 25” to 28” additional length to standard tongue length depending on width. Any size up to 8.5 x 24 and smaller models

72” Extended Triple Tube Tongue (8” Main Frames) For 26' and longer

Adds about 28” additional length to standard tongue length. For any size 8.5 x 26 and larger models

Adustable 2-5/16” Coupler in Lieu of Standard 2-5/16” Coupler

Allows you to adjust the coupler height to multiple positions. Upgrades any tandem axle model with a standard 2-5/16” coupler.

Adustable Pintle Eye Coupler In Lieu of Standard Coupler

Also called Government or Military Style

Bogey Wheels 10” Long (Pair)

Under rear frame to protect from dragging bottom of trailer on incline

Bogey Wheels 6” Long (Pair)

Under rear of frame to protect from dragging trailer on incline

Caster Wheel on Tongue Jack (comes standard with sand foot)

All Anvil models include a sand foot in base price. Choose this to upgrade to a caster wheel. (not recommended for tandem or triple axle models)

Electric 3500# Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer. Includes 12V electric 3500 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Electric 9000# HD Winch Installed w/ 12V Battery (mount plate included)

Add this to any 8.5 wide car hauler trailer with at least 5200 lb axles. Includes 12V electric 9000 lb capacity winch, 12V battery, control cable, winch mount plate welded to frame, all installed in center front of trailer, ready to work!

Flush Mount Floor D-Rings (welded in frame)-Each

Note: All 8.5 wide models come standard with 2 in front and 2 in rear.

Fold Down Stabilizer Jacks (Pair)

Usually for rear corners (can also be placed on front corners)

Motorcycle Wheel Chock (Removable)

Installed your location choice or loose. We recommend also purchasing at least two floor D-Rings for tie down use with each chock.

Rear Drop Down Jacks (3000 lb.) (Pair)

Recessed Flush Mount Floor E-Track ($15 per foot)

Welded and recessed flush mounted in floor, your location. Minimum 8' purchase. Add item to your cart then update your cart to the total amount of feet to run length of your trailer per run.