Add Surge Brakes to Any Single 3500 lb (no brake) Axle Model w/2” Coupler

Add surge brakes to any standard single 3500 lb idler (no brake) axle model with standard 2” coupler.

Sport Package on Single Axle Model

Includes: Drop Axle upgrade, ATP Vertical Guard on V-Nose, Fold-down Rear Stabilizer Jacks

Sport Package on Tandem Axle Model

Includes: Drop Axles upgrade, ATP Vertical Guard on V-Nose, Fold-down Rear Stabilizer Jacks

Upgrade 5' Wide Model to 3500 lb Axle w/15” Wheels

Upgrades a 5' wide single axle model from standard 2000 lb to 3500 lb axle (no brakes) and upgrades from 13” to 15” wheels/tires.

Upgrade 6' or 7' Wide Tandem 3500 lb Axle Model to 5200 lb Axles

This upgrades both axles on any 6' or 7' wide tandem axle model with standard 3500 lb electric brake axles to 5200 lb electric brake axles and larger 6 lug wheels 15” D Rated tires. Also upgrades the frame to 6”.

Upgrade 6' or 7' Wide Tandem 3500 lb Axle Model to 7000 lb Tandem Axles

This upgrades both axles on any 6' or 7' wide tandem axle model with standard 3500 lb electric brake axles to 7000 lb electric brake axles and larger 8 lug 16” wheels and E -rated radial tires.

Upgrade 8.5 Wide ”Dragster Auto Carrier” from Tandem 3500 lb Axle Model to 5200 lb Tandem Axles w/Frame Upgrade (up to 24' Long)

This upgrades both axles on any standard Dragster Auto Carrier 8.5'wide tandem axle model with 6” frame up to 24' long, with standard 3500 lb electric brake axles, to 5200 lb electric brake axles and larger 6 lug wheels and 15” D Rated tires.

Upgrade 8.5 Wide Tandem 3500 lb Axle Model to 5200 lb Tandem Axles w/Frame Upgrade (up to 24' Long)

This upgrades both axles on any standard Elite V 8.5'wide tandem axle model up to 24' long, with standard 3500 lb electric brake axles, to 5200 lb electric brake axles and larger 6 lug wheels and 15” D Rated tires. Also upgrades the frame to 6”.

Upgrade 8.5 Wide Tandem 3500 lb Axle Model to 7000 lb Tandem Axles (up to 24' Long)

This upgrades both axles on any 8.5'wide tandem axle model up to 24' long, with standard 3500 lb electric brake axles, to 7000 lb electric brake axles and larger 8 lug wheels and 16” E- rated radial tires.

Upgrade Any Single Axle (no brakes) Model to Axle w/ Electric Brakes

This upgrades any standard single, no brake idler axle model to same capacity axle w/ electric brakes, also upgrades to 7 pin harness and safety breakaway.

Upgrade Any Single Axle Model to Torsion Axle w/ Electric Brakes

This upgrades any standard single, no brake idler leaf spring axle model to a torsion axle w/ electric brakes, 7 pin harness and safety breakaway.

Upgrade Any Single Leaf Spring Axle Model to Torsion Axle (no brakes)

This upgrades any standard single, no brake idler leaf spring axle model to a torsion no brake idler axle.

Upgrade Any Single Straight Axle Model to Drop Leaf Spring Axle

This upgrades any standard single straight leaf spring axle model to drop leaf spring axle. Lowers trailer about 3 + inches.

Upgrade Any Tandem 3500# Axle Model To Surge Brakes

This upgrades any tandem axle model with standard 2-5/16” coupler and tandem 3500 lb electric brake axles to the surge brake axle ILO electric brakes.

Upgrade Any Tandem 5200 lb Axle Model to 7000 lb Tandem Axles

This upgrades both axles on any tandem axle model with standard 5200 lb electric brake axles to 7000 lb electric brake axles and larger 8 lug 16” wheels and  E rated radial tires.

Upgrade Any Tandem 5200 lb or 6000 lb Axles Model to Surge Brakes

This upgrades any model with standard 2-5/16” coupler, tandem 5200 lb or 6000 lb tandem axles to the surge brakes

Upgrade Any Tandem 6000 lb Axle Model to 7000 lb Tandem Axles

This upgrades both axles on any tandem axle model with standard 6000 lb electric brake axles to 7000 lb electric brake axles and larger 8 lug 16” wheels and E rated radial tires.

Upgrade Any Tandem Axle Model w/ 6000 lb Axles to Triple 6000 lb Axles (Includes Frame Upgrade)

This upgrades any tandem 6000 lb axles (12,000 GVWR) model to triple 6000 lb axles (18,000 GVWR) and also upgrades to a heavier duty framework.

Upgrade Any Tandem Axle Model w/ 6000 lb Axles to Triple 7000 lb Axles (Includes Frame Upgrade)

This upgrades an tandem 6000 lb axles (12,000# GVWR) model to triple 7000 lb axles (21,000# GVWR) and also upgrades to a heavier duty framework.

Upgrade Any Tandem Leaf Spring Axle Model to Torsion Axles w/ Electric Brakes

This upgrades any standard tandem straight leaf spring electric brake axle model (any capacity) from standard straight leaf spring axles to torsion axles.

Upgrade Any Tandem Straight Leaf Spring Axle Model to Drop Leaf Spring Axles

This upgrades any standard tandem straight leaf spring axles model to drop leaf spring axles. Lowers trailer about 3 + inches.

Upgrade to Spread ”California Style” Tandem Torsion Axle Design (8.5 Wide Models Only)

This upgrades any tandem leaf spring axle model to spread style tandem axle design and also upgrades from standard spring axles to the required torsion axles. (On any capacity axle you choose)

Base Cabinets ($199 per foot)

Choose this to add base cabinets to any width model you purchase. Wood frame with your choice of painted wood doors or aluminum metal. Add to cart, then update cart quantity to number of feet you want to add. Normally installed across the front, but can be installed in your location choice. Minimum quantity 4'

L Shaped Base & Overhead Cabinets

Choose this if you want to add a base and overhead cabinet in a front corner of any width model, to join with straight cabinets purchased separately.

Overhead Cabinets ($169 per foot)

Choose this to purchase overhead cabinets on any width model you purchase. Wood frame with your choice of painted wood doors or aluminum metal doors. Add to cart, then update cart quantity to number of feet of cabinet., normally installed across the front, but can be installed in your location choice. Minimum quantity 4'

Partition Wall Only-No Door (Any Width Model)

Plywood partition wall only, insulated. (No walk thru door). Your location choice, any width model.

Partition Wall w/2' Walk Thru Door & Key Lock (Any Width Model)

Plywood partition wall, insulated, with a 2' wide walk thru door with flush key lock. Your location choice, any width model.

Concession Door w/Serving Slider Window-40” High x 74” Long

Locking lift up concession door. Serving window has two 24” vertical sliders, one 24” fixed glass. Installed in your location choice. This is the locking concession door and the serving window. Must purchase fold-up serving shelf separately, if desired.

Exterior Fold Up Serving Shelf 74” Long

To use on outside of trailer under the concession awning door/window.

Lift Up Awning Concession Door Only-40” High x 74” Long

Fits the 40” x 74” concession serving window if window is also purchased. Your location choice. Includes latches, gas shocks, safety supports. Can be purchased without a window, will just be a framed opening.

12' Open Rear Porch w/Steel Deck Floor & Side Railing w/Walk Thru Gate-(Any Width Model)

Select your overall trailer length model. Choose this option to convert the rear 12' of any width model to a open rear back porch with a steel deck floor and with open side railing and a walk through gate.

12' Open Rear Porch w/Steel Deck Floor-Any Width Model (No Side Railing)

Select your overall trailer length model. Choose this option to convert the rear 12' of any width model to a open rear back porch with a steel deck floor. No side railing, all open.

4' Open Rear Porch w/Steel Deck Floor & Side Railing w/Walk Thru Gate-(Any Width Model)

Select your overall trailer length model. Choose this option to convert the rear 4' of any width model to a open rear back porch with a steel deck floor and with open side railing and a walk through gate.

4' Open Rear Porch w/Steel Deck Floor-Any Width Model (No Side Railing)

Select your overall trailer length model. Choose this option to convert the rear 4' of any width model to a open rear back porch with a steel deck floor. No side railing, all open.

8' Open Rear Porch w/Steel Deck Floor & Side Railing w/Walk Thru Gate-(Any Width Model)

Select your overall trailer length model. Choose this option to convert the rear 8' of any width model to a open rear back porch with a steel deck floor and with open side railing and a walk through gate.

8' Open Rear Porch w/Steel Deck Floor-Any Width Model (No Side Railing)

Select your overall trailer length model. Choose this option to convert the rear 8' of any width model to a open rear back porch with a steel deck floor. No side railing, all open.

36” Ramp Door in the V-Nose Front (8.5 Wide Models)

Built in Elite V-Nose models only.

4' Ramp Door In Extended V-Nose w/Extended Triple Tube Tongue (8.5 Wide Only)

Requires 8.5 wide model for ramp door in V-front.

Add 12” Steel Treadplate Flip/Flap on Any Ramp Door Ground End

This option adds a steel treadplate flip/flap end on piano hinge onto the ground end on a ramp rear door for easier roll up off ground onto door.

Add 16” ATP Covered Over Plywood Flip/Flap on Any Ramp Door Ground End

This option adds a 16” plywood flip/flap that is also covered in Aluminum Treadplate (ATP), on piano hinge attached to the ground end on a ramp rear door for easier roll up off ground onto door.

Add 16” Plywood Flip/Flap on Any Ramp Door Ground End

This option adds a plywood flip/flap end on piano hinge to the ground end on a ramp rear door for easier roll up off ground onto door.

Add a 24” Wide Side Exit Door w/Bar Lock

Normally added on 5 wide models because they do not come standard with a side door. But can be added to any model as a side exit door in any location you choose. Can be up to 84” tall if inside trailer height is at least 90”

Add a 30” Wide Side Exit Door w/Bar Lock

This adds a 30” side exit door in your choice location. Can be up to 84” tall if trailer inside height is at least 90”

Add a 36” Wide Side Exit Door w/Bar Lock

This adds a 36” side exit door in your choice location. Can be up to 84” tall if trailer inside height is at least 90”.

Add a 48” Wide Side Exit Door w/Bar Lock

This adds a side exit door in your choice location. Can be up to 84” tall trailer inside height is at least 90”.

Add a Flush RV Style Key Lock to Any Side Door

This adds a flush key lock to any side door with a standard bar lock and hasp to add extra security. Also needed if you plan to sleep in trailer for  exit from inside.

ATP Tread Plate on Ramp Rear Door

Aluminum tread plate cover over any ramp rear door, with or without the flip flap end, on any width model

Escape Door on Side 48” x 48” w/Bar Lock for Padlock

Normally added on 8.5 wide model for easy escape out the side of trailer. Single swing door. Standard mounting is on driver side centered over fenders, but can be placed wherever you choose in the side wall on either side of trailer.

Generator Inside Storage Compartment w/Louvered 36” x 24” Door Included

This option includes: Louvered Vented 36” x 24” Generator Door and Interior Generator Plywood Storage Compartment (your choice side location). This is for generator storage only and allows outside access to your generator. Cannot run generator inside the storage box. Must purchase the slide-out generator tray separately if you want to be able to slide out the generator to run it.

Generator Lift-Off Storage Box Mounted on Steel Platform on Extended Tongue (Flat Front Models Only)

This is a storage box for your generator, box color matched to trailer exterior, mounted on an extended triple tube tongue on a steel platform. Only available on flat front models.

Generator Louvered Vented Access Door Only (36” x 24”)

Your choice location.  Only used for outside access to load and unload a generator.

Generator Platform on Extended Triple Tube Tongue (Only Available on Flat Front Models)

Platform is 24” x 34” (approx) expanded metal bottom in steel frame, mounted onto the longer extended triple tube tongue, and fits on all bumper pull sizes.  Choosing this option will automatically convert your trailer to a flat front instead of a V-front, and includes the longer extended tongue needed to accommodate the platform & turning radius.

Generator Slide-out Tray For Use With Inside Generator Storage Compartment

If you are purchasing the inside generator storage box compartment, and want to mount your generator on a slide-out tray to be able to slide your generator in and out whenever you need to run it, add this slide-out tray option. Slide-out tray will be mounted inside the generator storage compartment for your after-market generator install.

Jack-Stands (Fold-down) on Medium or Heavy Duty Rear Ramp Door

One pair, added on door exterior (see pic) as stabilizer jacks on the optional medium or heavy duty rear ramp door; allows you to use ramp door as a walk-on deck. (Not available on light duty ramp door).

Rubber Tread Plate on Ramp Rear Door

Rubber tread plate cover over any ramp rear door, with or without the flip flap end, on any width model

Side Door Step-Well (available on 6” or 8” frame 8.5 wide models only)

Built-in side door step well. Can only be installed on a 8.5 wide model with 6” or 8” main frame.

Step (pull-out) Under Any Side Door

Add this pull out metal step under any side door for easier stepping into the trailer door.

Upgrade 5', 6', 7' Wide Model to Light Duty Ramp Rear Door w/Spring Assist (1500# capacity)

This upgrades any 5', 6',7' wide model with standard barn rear doors, to a spring assisted light (normal) duty ramp rear door. Must purchase the flip/flap for ground end separately if desired.

Upgrade 6' or 7' Wide Model to Medium Duty Ramp Rear Door w/Spring Assist (2000# capacity)

This upgrades any 6' or 7' wide model with standard barn rear doors, to a spring assisted medium duty ramp rear door. Must purchase the flip/flap for ground end separately if desired.

Upgrade 7' or 8.5' Wide to Heavy Duty Ramp Rear Door w/Spring Assist (4500# capacity)

Also requires 16” or 12” OC floor cross member upgrade. Available on 7' or 8.5' wide models only. (8.5' wide Auto Carrier Models are standard with this HD door). This upgrades from the standard barn rear doors to a Heavy Duty (4500 lb capacity) spring assisted ramp rear door.  Note: Not designed to hold full capacity at once on the door only. Must purchase flip/flap for ground end separately if desired.

Upgrade 8.5' Wide Model to Medium Duty Ramp Rear Door w/Spring Assist (2000 lb capacity)

Upgrade form standard barn rear doors to medium duty ramp rear door on any 8.5' wide models. Add flip flap on ground end separately, if desired.

Upgrade Any 5' Wide Model from Single Swing Rear Door to Double Barn Doors

Choose this to upgrade any 5' wide model from the standard single swing rear door to double rear barn doors.

Upgrade the Standard 24” Side Door to 30”

Upgrade any trailer standard with a 24” side door a 30” side door.

Upgrade the Standard 24” Side Door to 36”

Upgrade any trailer standard with a 24” side door a 36” side door.  (must be at least 14' long model for 36” door to fit)

Upgrade the Standard 30” Side Door to 36”

Upgrade any trailer standard with a 30” side door a 36” side door.

Upgrade the Standard 30” Side Door to 48”

Upgrade any trailer standard with a 30” side door a 48” side door (if trailer length has space to fit).

Upgrade the Standard 36” Side Door to 48”

Upgrade any trailer standard with a 36” side door a 48” side door (if trailer has space to fit).

Upgrade to 32” x 68” RV STYLE Door W/Screen and Window (Requires Minimum 6'6” Inside Trailer Height)

REQUIRES AT LEAST 6'6” INSIDE TRAILER HEIGHT! Upgrades from any width standard side door to a 32” x 68” RV (camper) type door with a flush key lock, a window in the door and a screen door.

Upgrade to 36” x 78” RV Door W/Screen and Window (Requires Minimum 7' Inside Trailer Height)

Requires minimum 84” (7') Inside Trailer Height. Upgrades from any standard side door to 36” x 78” RV (Camper) Style door with flush key lock, window in door and a screen door.

100 AMP Breaker Panel Box w/Cable Hatch

110 Volt Outside Mount Rear LED Loading Light (each)

Per each 110vLED loading light. Update cart to desired number of lights, minimum of 2 recommended. (Note: picture shown for illustration purposes only, exact style may vary).

110V GFI Receptacle Only (Outside Location)

Outside location mounted receptacle only. Must purchase electrical panel box or electrical package separately for it to be wired.

110V GFI Receptacle Only-(Inside Location)

Inside location mounted receptacle only. Must purchase electrical panel box or electrical package separately for it to be wired.

110V Inside Wall Switch Only

Add an extra 110V switch. Your location choice inside any model.

110V Interior Wall Receptacle Only (each)

Receptacle only. Must purchase electrical panel box or electrical package separately for it to be wired.

110V Pull Chain Light (each)

Installed. Also wired if electric panel box or electric package is purchased.

110V Wire Stub ONLY (each)

If desired, this stub can be purchased if you are NOT purchasing an electrical package or an electrical breaker box. The wire stub is used for any 110V item that you wish to connect to electrical service yourself, aftermarket. It will be connected to the 110V item(s) you select. You need one stub per 110V item ordered.

12 Volt Battery w/Box

Your choice on tongue mount if possible or inside location. Connected to 12V system for on board 12V power.

12 Volt Exterior Porch Light

12 Volt Outside Mount Rear LED Loading Light (each)

Per each 12v LED loading light. Update cart to desired number of lights, minimum of 2 recommended. (Note: picture shown for illustration purposes only, exact style may vary).

12V Interior Dome Light-LED (each)

Add extra inside 12V LED dome light. All models base price includes one standard dome light. Add as many extra LED dome lights you want in your cart to be evenly spaced or placed at your choice locations.

12V Interior Dome Light-Standard (each)

Add extra inside standard 12V dome light. All models base price includes one standard 12V dome light. Add as many extra in your cart to be evenly spaced or placed at your choice locations.

12V Interior Puck Light (each)

Installed in your choice ceiling location. Add as many inside puck lights as you desire. (one or more switches must be purchased separately for puck lights).12v battery power supply sold separately if desired.

12V LED Surface Mounted 24” Exterior Light Bar (each) 12V Battery Power Sold Separately

Mounted on either exterior side wall of any size trailer, at your location choice, includes switch. Price is per each LED light bar. Add to cart then change cart to desired quantity. Note: 12V power supply (battery in a box) is sold separately of desired.

30 AMP Breaker Box Panel w/ Cable Hatch and Lifeline Cord

Normally mounted in front, but can be placed at your desired interior location.

30 AMP Motor ”Twist Lock” Motor Base Plug & Loose 25' Cord w/Plug Ends ILO Standard Inside Drop Cord

This option will add a 30 AMP exterior motor base twist lock plug outside connected to the breaker panel box (panel box sold separately or included in electric packages), and will also upgrade to a loose  30 AMP lifeline cord with twist plug end and 30 AMP plug end attached on cord.

50 AMP Breaker Box Panel w/ Cable Hatch and Lifeline Cord

50 AMP Motor Base ”Twist Lock” Exterior Plug & Loose 25' Cord w/Plug Ends ILO Standard Inside Drop Cord

This option will add a 50 AMP exterior motor base twist lock plug outside connected to the inside breaker panel box (panel box sold separately or included in electric packages), and will also upgrade to a loose 25' lifeline 50 AMP cord with the twist plug end and the 50 AMP plug end attached on cord.

A/C Roof Mount Brace Only

Roof mount brace only for your later after market installation of an A/C unit yourself. Your location choice in roof, normally centered. No wiring.

A/C Roof Mount Brace w/ 110V Wire Stub (For Aftermarket Use)

Roof mount brace plus the wire stub you will need for your after market installation of an A/C unit yourself. Your location choice in roof, normally centered. Will be wired into the breaker box if also purchased separately or included in an electrical package purchased separately.

Add 110V Powered Roof Vent to Any Model (each)

Adds one 110V powered roof vent. If multiple vents ordered, will be evenly spaced in trailer.  (Adds approx 4” to overall trailer height). All models standard with flow thru side vents. Note: Not wired unless you also purchase an electric panel box or package. (see Electrical Options)

Add 12V Powered Roof Vent to Any Model (each)

Adds one 12V powered roof vent. If multiple vents ordered, will be evenly spaced in trailer.  (Adds approx 4” to overall trailer height). All models standard with flow thru side vents.

Add Manual Roll Up Roof Vent to Any Model (each)

Adds one manual roll up roof vent, centered in trailer. If multiple vents ordered, will be evenly spaced in trailer.  (Adds approx 4” to overall trailer height). All models come standard with  a pair of flow thru side vent.

Air Conditioner w/Heat Strip-13,500 BTU-Installed in Roof

Unit is installed in roof, price includes required roof mount bracket. Normally centered in trailer, can be placed your location. Electrical panel box or package must be purchased separately to be wired for A/C to work, see electrical options.

Air Conditioner w/Heat Strip-15,000 BTU-Installed in Roof

Unit is installed in roof, price includes required roof mount bracket. Normally centered in trailer, can be placed your location. Electrical panel box or package must be purchased separately for A/C to be wired in to work, see electrical options.

Complete 100 AMP Electrical Package w/Lights-Recepts

Mounted on outside of interior walls in conduit. This package includes: 100 AMP Electric panel box with lifeline cord, 2-110V wall receptacles, 2-4' fluorescent light fixtures, 1 light wall switch. Any additional 110V electrical items you purchase will also be wired with this package, like an A/C, etc. (Requires adding a finished ceiling selection of your choice in Interior Options)

Complete 30 AMP Electrical Package w/Lights-Recepts

Mounted on outside of interior walls in conduit. This package includes: 30 AMP Electric panel box with lifeline cord, 2-110V wall receptacles, 2-4' fluorescent light fixtures, 1 light wall switch. Any additional 110V electrical items you purchase will also be wired with this package, like an A/C, etc. (This package requires adding your finished ceiling selection in Interior Options)

Complete 50 AMP Electrical Package w/Lights-Recepts

Mounted on outside of interior walls in conduit. This package includes: 50 AMP Electric panel box with lifeline cord, 2-110V wall receptacles, 2-4' fluorescent light fixtures, 1 light wall switch. Any additional 110V electrical items you purchase will also be wired with this package, like an A/C, etc. (Requires adding a finished ceiling selection of your choice in Interior Options)

Electrical Wiring UPGRADE to All Recessed (Hidden) Behind Walls & Ceiling ($16 PLF)

Add this upgrade if you want your wiring recessed (hidden). If you do not purchase this upgrade, all is electrical is mounted on exterior of wall and ceiling in conduit. Price calculated per linear foot x length of any trailer.

Extra Floor Cable Hatch for Electric Cord

One comes standard with any breaker box or electric package with breaker box purchase. Your placement choice

Flourescent 4' Ceiling Light (each)

Installed in ceiling. Also wired if you purchase electric panel box or electric package. (2 lights are included in packages). Ceiling liner of your choice is available and recommended to cover exposed wiring.

Generator Inside Storage Compartment w/Louvered 36” x 24” Door Included

This option includes: Louvered Vented 36” x 24” Generator Door and Interior Generator Plywood Storage Compartment (your choice side location). This is for generator storage only and allows outside access to your generator. Cannot run generator inside the storage box. Must purchase the slide-out generator tray separately if you want to be able to slide out the generator to run it.

Generator Lift-Off Storage Box Mounted on Steel Platform on Extended Tongue (Flat Front Models Only)

This is a storage box for your generator, box color matched to trailer exterior, mounted on an extended triple tube tongue on a steel platform. Only available on flat front models.

Generator Louvered Vented Access Door Only (36” x 24”)

Your choice location.  Only used for outside access to load and unload a generator.

Generator Platform on Extended Triple Tube Tongue (Only Available on Flat Front Models)

Platform is 24” x 34” (approx) expanded metal bottom in steel frame, mounted onto the longer extended triple tube tongue, and fits on all bumper pull sizes.  Choosing this option will automatically convert your trailer to a flat front instead of a V-front, and includes the longer extended tongue needed to accommodate the platform & turning radius.

Generator Slide-out Tray For Use With Inside Generator Storage Compartment

If you are purchasing the inside generator storage box compartment, and want to mount your generator on a slide-out tray to be able to slide your generator in and out whenever you need to run it, add this slide-out tray option. Slide-out tray will be mounted inside the generator storage compartment for your after-market generator install.

Max Air Roof Vent Cover Only

Allows you to leave roof vent open while parked or driving. Must purchase roof vent separately.

Motorbase 110V Exterior 20 AMP Standard 3-Prong Plug w/One Interior 110V Wall Outlet

This will add a 20 AMP standard 3-prong 110V motorbase plug on outside of trailer (with weatherproof cover) wired to one included 110V wall outlet inside your trailer, for you to have an interior outlet with 110V power, when connecting a standard 3-prong extension cord to an exterior power supply. (pic for illustration purposes only, may not be exact plug brand used by factory)

Upgrade From 12V-4 Way Flat Plug to 12V-7 Way Flat Plug

Upgrade any model with standard 4 way flat light wire plug to a 7 way flat plug. Only changes the plug type

Upgrade the Standard 12V Interior Dome Light to LED

All models base price includes one standard 12V dome light. This option will upgrade the standard inside 12V dome light to LED.

Upgrade to Pop Out Sidewall Vents (Set of 2)

This upgrades any model from standard plastic stationary flow thru side vents to pop out aluminum sidewall vents.

Complete 100 AMP Electrical Package w/Lights-Recepts

Mounted on outside of interior walls in conduit. This package includes: 100 AMP Electric panel box with lifeline cord, 2-110V wall receptacles, 2-4' fluorescent light fixtures, 1 light wall switch. Any additional 110V electrical items you purchase will also be wired with this package, like an A/C, etc. (Requires adding a finished ceiling selection of your choice in Interior Options)

Complete 30 AMP Electrical Package w/Lights-Recepts

Mounted on outside of interior walls in conduit. This package includes: 30 AMP Electric panel box with lifeline cord, 2-110V wall receptacles, 2-4' fluorescent light fixtures, 1 light wall switch. Any additional 110V electrical items you purchase will also be wired with this package, like an A/C, etc. (This package requires adding your finished ceiling selection in Interior Options)

Complete 50 AMP Electrical Package w/Lights-Recepts

Mounted on outside of interior walls in conduit. This package includes: 50 AMP Electric panel box with lifeline cord, 2-110V wall receptacles, 2-4' fluorescent light fixtures, 1 light wall switch. Any additional 110V electrical items you purchase will also be wired with this package, like an A/C, etc. (Requires adding a finished ceiling selection of your choice in Interior Options)

Electrical Wiring UPGRADE to All Recessed (Hidden) Behind Walls & Ceiling ($16 PLF)

Add this upgrade if you want your wiring recessed (hidden). If you do not purchase this upgrade, all is electrical is mounted on exterior of wall and ceiling in conduit. Price calculated per linear foot x length of any trailer.

Aluminum Tread Plate (ATP) Corner Post Covers (pair)

For any size model. One pair. (Comes standard on a flat front 8.5 wide bumper pull model).

Aluminum Tread Plate Vertical Nose Plate on V Front

Add ATP vertical V-nose plate on any width model. (matches rock guard)

Blackout Trim Package (5'-6'-7' Wide Models)

Change all exposed trim metal to black on any length 5'-6'-7' wide model. Can be used with any exterior metal color. (Any exterior metal color other than standard white, red or black must also be purchased separately under color choices section)

Blackout Trim Package (8.5' Wide Models)

Change all exposed trim metal to black on any length 8.5' wide model. Can be used with any exterior metal color. (Any exterior metal color other than standard white, black or red must also be purchased separately under color choices section)

Flat Front Instead of Standard V-Front (free change)

Photo is to show this specific option only. Other options shown are additional. Choose this option if you want a flat wall across the front. (ATP corners shown in pic are an extra option)

Front Cap w/Cast Top Sides (8.5 Wide Flat Front Models Only)

This upgrade is for 8.5 wide models only, normally auto carrier models, and must be a flat front.  Note: Photo also shows the option of smooth anodized aluminum front vertical corner panels, these are sold separately if desired.

Ladder Roof Rack Cross Arm (Black Steel) Installed (per each arm)

Steel tubing cross arm attached to trailer side with angle iron brackets. Black ladder rack roof mounted cross arm/support. Each arm/support runs side to side across any width model. Minimum 2 arms required, must place arms not more than  4' apart. (Example: 12' distance for ladder storage requires 3 arms). Add this item to cart, update quantity to desired number of arms.

Off Road-Black .040 Matte Finish Exterior Metal-Upgrade from Any Standard Free Color ($40 PLF)

Price for up to a maximum additional height of 18”. Choose this option to upgrade from any standard free color to .040 thickness Black matte finish exterior metal. Price is calculated at per linear foot of the trailer.

Off Road-Dark Bronze .040 Matte Finish Exterior Metal-Upgrade from Any Standard Free Color ($42 PLF)

Price for up to a maximum additional height of 18”. Choose this option to upgrade from any standard free color to .040 thickness dark bronze matt finish exterior metal. Price is calculated at per linear foot of the trailer.

Off Road-Gray .040 Matte Finish Exterior Metal-Upgrade from Any Standard Free Color ($40 PLF)

Price for up to a maximum additional height of 18”. Choose this option to upgrade from any standard free color to .040 thickness dark bronze matt finish exterior metal. Price is calculated at per linear foot of the trailer.

Roof Access Ladder (steel)

Stationary mounted. Front mount only if on 8.5 wide model.

Roof-Full Walk-on Roof (Any Width Model) $70 PLF

Available only for entire length of roof only and priced per linear foot times length of trailer. Includes: 16” on center roof cross braces, 3/4” plywood over cross members under the standard metal roof.

Screw-less (Smooth) Exterior Metal-Any Width ($55 PLF)

All exterior metal is adhered by high tech adhesive, no screws are used. Best to be used on trailers you are wrapping. Limited warranty and not recommended in extreme hot or cold climates.

Smooth Polished Aluminum Front Corner Post Covers (pair)

These corner post covers come standard on any ”Dragster” 8.5 Wide Model when you select a flat front. These can be added to any model.  One pair. (The Aluminum front cap shown in the pic is sold separately if desired, only on 8.5 wide flat front models)

Sport Package on Single Axle Model

Includes: Drop Axle upgrade, ATP Vertical Guard on V-Nose, Fold-down Rear Stabilizer Jacks

Sport Package on Tandem Axle Model

Includes: Drop Axles upgrade, ATP Vertical Guard on V-Nose, Fold-down Rear Stabilizer Jacks

Upgrade Any 5' or 6' Wide Single Axle Model to ATP Fenders

Upgrades both fenders on a single axle 5' or 6' wide model from smooth to ATP.

Upgrade Any 5' Wide to 24” Tall ATP Rock Guard Front

Upgrade any 5' wide from standard 16” to 24” ATP rock guard front.

Upgrade Any 5' Wide to 36” Tall ATP Rock Guard Front

Upgrade any 5' wide from standard 16” to 36” ATP rock guard front.

Upgrade Any 5' Wide to 48” Tall ATP Rock Guard Front

Upgrade any 5' wide from standard 16” to 48” ATP rock guard front.

Upgrade Any 6' or 7' Wide Tandem Axle Model to ATP Fenders

Upgrades both fenders on a tandem axle 6' or 7' wide model from smooth to ATP.

Upgrade Any 6' Wide to 24” Tall ATP Rock Guard Front

Upgrade any 6' wide from standard 16” to 24” ATP rock guard front.

Upgrade Any 6' Wide to 36” Tall ATP Rock Guard Front

Upgrade any 6' wide from standard 16” to 36” ATP rock guard front.

Upgrade Any 6' Wide to 48” Tall ATP Rock Guard Front

Upgrade any 6' wide from standard 16” to 48” ATP rock guard front.

Upgrade Any 7' Wide to 24” Tall ATP Rock Guard Front

Upgrade any 7' wide from standard 16” to 24” ATP rock guard front.

Upgrade Any 7' Wide to 36” Tall ATP Rock Guard Front

Upgrade any 7' wide from standard 16” to 36” ATP rock guard front.

Upgrade Any 7' Wide to 48” Tall ATP Rock Guard Front

Upgrade any 7' wide from standard 16” to 48” ATP rock guard front.

Upgrade Any 8.5 Wide Tandem Axle Model to ATP Fender Skirts

Upgrades both fender skirts on a tandem axle 8.5 wide model from smooth to ATP.

Upgrade Any 8.5' Wide to 24” Tall ATP Rock Guard Front

Upgrade any 8.5' wide from standard 16” to 24” ATP rock guard front.

Upgrade Any 8.5' Wide to 36” Tall ATP Rock Guard Front

Upgrade any 8.5' wide from standard 16” to 36” ATP rock guard front.

Upgrade Any 8.5' Wide to 48” Tall ATP Rock Guard Front

Upgrade any 8.5' wide from standard 16” to 48” ATP rock guard front.

Upgrade Any Model (Up to 7' 6” Inside Height) to Thicker .040 Exterior Metal (Black or White Only) PLF

Available in Black or White Only

Upgrade Any Width Model from Standard White .024 Exterior Metal to Thicker .030 White Metal (PLF)

Choose this option if you selected the standard free .024 white option, and you want to upgrade the metal to the thicker .030 white metal exterior.

V Front Nose on any Goose-neck Model

Upgrade from standard flat front to V front on any goose-neck model.

Adjustable Height Standard 2-5/16” Ball Coupler (For All Tandem Axles)

Upgrades from standard stationary 2-5/16” ball coupler to an adjustable height standard 2-5/16” ball coupler.

Adjustable Height Standard 2” Ball Coupler

Upgrades from standard stationary 2” ball coupler to an adjustable height standard 2” ball coupler.

Generator Platform on Extended Triple Tube Tongue (Only Available on Flat Front Models)

Platform is 24” x 34” (approx) expanded metal bottom in steel frame, mounted onto the longer extended triple tube tongue, and fits on all bumper pull sizes.  Choosing this option will automatically convert your trailer to a flat front instead of a V-front, and includes the longer extended tongue needed to accommodate the platform & turning radius.

Hitch Receiver Only (2” sq) Welded On Rear of Trailer

To use for attaching your bike rack or luggage carrier rack, etc.,  that requires this  2”square  receiver for your slide-in.

Removable & Adjustable Height Bull Dog Style 2-5/16” Ball Coupler (For Any Tandem Axles Model)

Upgrades from standard stationary 2-5/16” ball coupler to a removable & adjustable height bull dog style 2-5/16” ball coupler.

Removable & Adjustable Height Bull Dog Style 2” Ball Coupler (For Any Single Axle Model)

Upgrades from standard stationary 2” ball coupler to a removable & adjustable height bull dog style 2” ball coupler.

Roof-Full Walk-on Roof (Any Width Model) $70 PLF

Available only for entire length of roof only and priced per linear foot times length of trailer. Includes: 16” on center roof cross braces, 3/4” plywood over cross members under the standard metal roof.

Upgrade Ceiling Cross Bow Members to 1” x 2” Tubing ($8 PLF)

Standard ceiling cross bow members on 5', 6' 7' wide models 1” x 1”. Standard on 8.5 wide models 1” x 1-1/2”. Price for upgrade is calculated per linear foot of trailer.

Upgrade to 12” On Center Floor Cross Members ($17 PLF)

Upgrades any width model to 12” on center floor brace cross members. Calculated at per linear foot.

Upgrade to 12” On Center Roof Cross Members ($12 PLF)

Upgrades any width model to 12” on center roof cross members. Calculated at per linear foot.

Upgrade to 12” On Center Wall Posts ($16 PLF)

Upgrades any width model to 12” on center wall post members. Calculated at per linear foot.

Upgrade to 16” On Center Floor Cross Members ($15 PLF)

Upgrades any width model with standard 24” on center to to 16” on center floor brace cross members. Calculated at per linear foot.

Upgrade to 16” On Center Roof Cross Members ($10 PLF)

Upgrades any width model with standard 24” on center to to 16” on center roof brace cross members. Calculated at per linear foot.

Upgrade to 16” On Center Wall Posts ($13 PLF)

Upgrades any width model to 16” on center wall post members. Calculated at per linear foot.

Upgrade to 2-5/16” Bulldog Coupler

This upgrades any standard 2-5/16” coupler model to a 2-5/16” Bulldog style coupler

Upgrade to 2” Bulldog Coupler

This upgrades any standard 2” coupler model to a 2” Bulldog style coupler

Upgrade to Extended (Longer) Triple Tube Tongue

This options extends the standard tongue by about 8”-12” depending on the trailer width. Longest on wider trailers due to the coupler angle. Note: If you intend to mount a generator or other item on the tongue, you need this extended tongue option and you must also convert to a flat front (No V front) to have enough space on tongue.

Upgrade to Pintle Eye Coupler

Upgrades any model from a ball type couple to a pintle eye coupler (also sometimes called Government style)

Upgrade Wall Posts to 1” x 2” Tubing ($10 PLF)

Standard wall posts are 1” x 1” tubing on all models. Price calculated per linear foot of trailer.

V Front Nose on any Goose-neck Model

Upgrade from standard flat front to V front on any goose-neck model.

Winch Plate-Welded in Frame Under Floor

This steel plate is welded in the frame, covered by the floor, for after market use to attached your winch into the plate. Normally located centered in the front of trailer floor, but can be placed at your chosen floor location.

Add 06” Extra Height ($15 PLF)

Increase any standard height by 6” inside, rear door opening and overall. Calculated at per linear foot on any width model

Add 12” Extra Height ($25 PLF)

Increase any standard height by 12” inside, rear door opening and overall. Calculated at per linear foot on any width model

Add 18” Extra Height ($32 PLF)

Recommend  using .030 or thicker exterior metal.  Increase any standard height by 18” inside, rear door opening and overall. Calculated per linear foot on any width model

Add 24” Extra Height ($38 PLF)

Recommend .030 or thicker exterior metal. Increase any standard height by 24” inside, rear door opening and overall. Calculated at per linear foot on any width model

Add 30” Extra Height ($42 PLF) Requires Metal Upgrade

Requires upgrade to heavier metal of your choice. Increase any standard height by 30” inside, rear door opening and overall. Calculated at per linear foot on any width model

Add 36” Extra Height ($50 PLF) Requires Metal Upgrade

Also requires upgrade to heavier metal of your choice. Increases any standard height by 36” inside, rear door opening and overall. Calculated at per linear foot on any width model

Reduce Inside and Overall Height-Any Width Model ($10 PLF)

Reduce the inside and overall height of any width model to your chosen height. Calculated per linear foot x trailer length. Specify desired inside or overall height in your checkout notes.

16” Wide Aluminum Treadplate (ATP) Floor Runners ($14 PLF)

One pair of ATP floor runners, each is 16” wide, installed front to rear. Calculated at per linear foot.

3/8” Plywood Interior Ceiling Liner ($PLF)

3/8” plywood ceiling liner is calculated at per linear foot on any width model.

Aluminum .030 Tread Plate Floor ($33 PLF)

Available on any model. Calculated at per linear foot. (E-track shown must be ordered separately if desired)

Aluminum Ceiling Liner ($24 PLF)

Aluminum w/Luan backing. Calculated at per linear foot on any width model. (Add aluminum walls  separately if desired)

Aluminum on Interior Walls ($28 PLF)

Calculated at per linear foot on any width model. (Add aluminum ceiling liner separately if desired)

ATP Tread Plate on Ramp Rear Door

Aluminum tread plate cover over any ramp rear door, with or without the flip flap end, on any width model

Indoor/Outdoor Carpet Flooring ($20 PLF)

Calculated at per linear foot on any width model.

Interior Ceiling Insulation ($12 PLF)

Calculated at $12 per linear foot on any width model. Note: Ceiling insulation purchase requires the separate purchase of a ceiling liner of your choice to hold in insulation. (You also can add wall insulation separately if desired)

Interior Walls Insulation ($14 PLF)

All walls. Calculated at $14 per linear foot on any width model. (Add ceiling insulation separately if desired)

Luan Interior Ceiling Liner ($PLF)

Woodtone Luan ceiling liner is calculated at per linear foot on any width model. A ceiling liner of some type is required with lights or electrical package purchase, to cover wiring in ceiling.

Partition Wall Only-No Door (Any Width Model)

Plywood partition wall only, insulated. (No walk thru door). Your location choice, any width model.

Partition Wall w/2' Walk Thru Door & Key Lock (Any Width Model)

Plywood partition wall, insulated, with a 2' wide walk thru door with flush key lock. Your location choice, any width model.

Rubber Tread Plate Floor ($28 PLF)

Black rubber tread plate floor covering plywood floor. Calculated at per linear foot on any width model. Note: Must add covering on ramp door separately if desired.

Rubber Tread Plate on Ramp Rear Door

Rubber tread plate cover over any ramp rear door, with or without the flip flap end, on any width model

Upgrade Walls to 3/4” Plywood ILO Standard 7/16” OSB ($PLF)

Upgrades all wall liner  to 3/4” plywood instead of standard 7/16” OSB, on any model. Calculated per linear foot x length of any width model.

Upgrade Walls to 3/8” Plywood ILO Standard 7/16” OSB ($PLF)

Upgrades all wall liner  to 3/8” plywood instead of standard 7/16” OSB, on any model.

Vinyl Floor ($30 PLF)

Available on any width model. Calculated at per linear foot. Sheet vinyl

White Vinyl Liner on Interior Ceiling ($13 PLF)

White vinyl ceiling liner. Calculated at $13 per linear foot on any width model. (Purchase white vinyl walls separately if desired)

White Vinyl Overlay on Interior Walls ($15 PLF)

Calculated at $15 per linear foot on any width model. (Purchase white vinyl ceiling liner separately if desired)

Flat Front Instead of Standard V-Front (free change)

Photo is to show this specific option only. Other options shown are additional. Choose this option if you want a flat wall across the front. (ATP corners shown in pic are an extra option)

Jack-Stands (Fold-down) on Medium or Heavy Duty Rear Ramp Door

One pair, added on door exterior (see pic) as stabilizer jacks on the optional medium or heavy duty rear ramp door; allows you to use ramp door as a walk-on deck. (Not available on light duty ramp door).

Off Road-Black .040 Matte Finish Exterior Metal-Upgrade from Any Standard Free Color ($40 PLF)

Price for up to a maximum additional height of 18”. Choose this option to upgrade from any standard free color to .040 thickness Black matte finish exterior metal. Price is calculated at per linear foot of the trailer.

Off Road-Dark Bronze .040 Matte Finish Exterior Metal-Upgrade from Any Standard Free Color ($42 PLF)

Price for up to a maximum additional height of 18”. Choose this option to upgrade from any standard free color to .040 thickness dark bronze matt finish exterior metal. Price is calculated at per linear foot of the trailer.

Off Road-Gray .040 Matte Finish Exterior Metal-Upgrade from Any Standard Free Color ($40 PLF)

Price for up to a maximum additional height of 18”. Choose this option to upgrade from any standard free color to .040 thickness dark bronze matt finish exterior metal. Price is calculated at per linear foot of the trailer.

Off Road-Roof Rack w/Access Ladder -5' Wide Models

Photo is to show this specific option/upgrade. Other options shown in photo are additional.

Off Road-Roof Rack w/Access Ladder -6' Wide Models

Photo is to show this specific option/upgrade. Other options shown in photo are additional.

Off Road-Roof Rack w/Access Ladder -7' Wide Models

Photo is to show this specific option/upgrade. Other options shown in photo are additional.

Off Road-Upgrade Any Single Axle Model to Torsion Axle w/32x11.50x15 Mud Tires

Torsion axle required. This upgrades any capacity axle your purchase to torsion axle. Photo is to show this specific option/upgrade illustration only. Other available options shown are priced separately.

Off Road-Upgrade Any Tandem Axle Model to Torsion Axles w/32x11.50x15 Mud Tires

Torsion axle required. Upgrades any capacity torsion axle you purchase on your trailer. Photo is to show this specific option/upgrade illustration only. Other available options shown are priced separately.

Spare Off-road 32” x 11.50 x 15” Mud Wheel/Tire (Fits 6-lug 5200# axle hub)

This spare wheel/tire fits the standard off road torsion 5200lb axle included in the off-road upgrade that is purchased separately. Price is per each spare.

Spare Off-road 32” x 11.50 x 15” Mud Wheel/Tire (Fits standard 5-lug 3500# axle hub)

This spare wheel/tire fits the standard off road torsion 3500lb axle included in the off-road upgrade that is purchased separately. Price is per each spare.

Caster Wheel on Any Tongue Jack Model

Add a removable jack caster wheel on any tongue jack model

Drop Leg Rear Stabilizer Jacks-One Pair (telescope adjustable height) 2k capacity

Mounted on rear corners of any model. Sticks up inside trailer when raised. Pic is for illustration purposes only, may not be of exact brand available at time of build

Floor Flush Mounted D-Ring Tie-downs (each)

Flush mounted, welded in framework D-ring, your location choice. Add to cart then update quantity in cart to # desired.

Floor Mounted Steel E-Track (By the Foot)

Minimum feet of one run x the length of your trailer. Attached with screws directly to the crossmembers of the trailer framework and elevated above floor. Add this item to your cart, then update cart to total feet desired. Placed in your choice location.

Fold Down Stabilizer Jacks-1,000 lb Capacity (1-Pair)

Price is for one pair, adjustable height, swing down stabilizer jacks installed on rear or front corners of any bumper pull model for stabilization when parked.

Jack-Stands (Fold-down) on Medium or Heavy Duty Rear Ramp Door

One pair, added on door exterior (see pic) as stabilizer jacks on the optional medium or heavy duty rear ramp door; allows you to use ramp door as a walk-on deck. (Not available on light duty ramp door).

Sand Foot Pad on Any Tongue Jack Model

Add a removable sand foot pad on any model tongue jack.

Scissor Jacks w/Hand Crank (2000 lb Capacity)

For any width model. Price is for one pair.

Set-Back Tongue Jack 6” (for standard or drop leg jack)

This option sets the tongue jack back approximately 6” in the tongue, behind the coupler, to allow most truck tailgates to drop down without hitting the jack. (cannot be used with a flip jack)

Sport Package on Single Axle Model

Includes: Drop Axle upgrade, ATP Vertical Guard on V-Nose, Fold-down Rear Stabilizer Jacks

Sport Package on Tandem Axle Model

Includes: Drop Axles upgrade, ATP Vertical Guard on V-Nose, Fold-down Rear Stabilizer Jacks

Swivel HD Floor Flush Mounted D-Ring Tie-downs (each)

Flush mounted, welded in framework swivel D-ring, your location choice. Add to cart then update quantity in cart to # desired.

Swivel Up Tongue Jack Upgrade

This upgrades any standard bumper pull stationary tongue jack to a swivel flip up tongue jack. Add sand foot or roller wheel separately if desired.

Upgrade Any Gooseneck Model From Standard To Electric/Hydraulic Dual Jacks

This option is for any gooseneck model only. Upgrades from standard dual manual jacks to electric/hydraulic jacks. Includes 12V battery.

Upgrade to a Drop-leg 7k Capacity Tongue Jack

This is an upgrade from the standard tongue jack. Usually selected on the larger payload 8.5 wide models.

Upgrade to Electric Tongue Jack w/12 Volt Battery

Upgrade any model from a standard manual tongue jack to an electric tongue jack. Includes 12v battery. Picture for demo only, actual jack may not be same exact design.

Wall Mounted D-Ring Tie-downs (each)

Placed at your desired locations, screwed in wall, for light duty strapping.

Wall Mounted E-Track (By the Foot)

Minimum one run x length of trailer. Add this item to your cart, then update quantity in your cart by multiplying your trailer length by how many rows of E-track you desire. Example: 12' trailer with one run on each side (2 rows) requires 24' less the width of any side door. Welded in side wall framework.

Winch Plate-Welded in Frame Under Floor

This steel plate is welded in the frame, covered by the floor, for after market use to attached your winch into the plate. Normally located centered in the front of trailer floor, but can be placed at your chosen floor location.

Aluminum Alloy 15” Mag Wheel Upgrade-5 Lug Standard 3500 lb Axle (each wheel)

Upgrades from standard steel 15” wheel to 15” aluminum mag wheel on any 5 lug 3500 lb axle model. Add to cart, then update quantity in cart to number of wheels on your trailer (2 for single axle, 4 for tandem axle). Price per each wheel. Style available may vary slightly.

Aluminum Alloy 15” Mag Wheel Upgrade-6 Lug 5200 lb Axle (each wheel)

Upgrades from standard steel 15” wheel to 15” aluminum wheel on any 6 lug 5200 lb axle model. Add to cart, then update quantity in cart to number of wheels on your trailer (2 for single axle, 4 for tandem axle, 6 for triple axle). Price per each wheel. Style available may vary slightly.

Aluminum Alloy 16” Mag Wheel/Radial Tire Upgrade-8 Lug 6k or 7k lb Axle (each)

Upgrades from standard 16” steel wheel to 16” aluminum wheel and radial tires on any 8 lug 6000 or 7000 lb axle model. Add to cart, then update quantity in cart to number of wheels on your trailer (2 for single axle, 4 for tandem axle, 6 for triple axle). Price per each wheel. Style available may vary slightly.

Chrome 15” Wheel Upgrade-5 Lug Standard 3500 lb Axle (each)

Upgrades from standard 15” steel wheel to 15” chrome wheel on any 5 lug 3500 lb axle model. Add to cart, then update quantity in cart to number of wheels on your trailer (2 for single axle, 4 for tandem axle). Price per each wheel.

Chrome 15” Wheel Upgrade-6 Lug 5200 lb Axle (each)

Upgrades from standard steel 15” wheel to 15” chrome wheel on any 6 lug 5200 lb axle model. Add to cart, then update quantity in cart to number of wheels on your trailer (2 for single axle, 4 for tandem axle, 6 for triple axle). Price per each wheel.

Chrome 16” Wheel Upgrade-8 Lug 6k or 7k lb Axle (each)

Upgrades from standard 16” steel wheel to 16” chrome wheel on any 8 lug 6000 or 7000 lb axle model. Add to cart, then update quantity in cart to number of wheels on your trailer (4 for tandem axle, 6 for triple axle). Price per each wheel.

Chrome Center Caps-15” or 16” Wheel (each cap)

Add to your cart, update quantity in your cart to # of wheels on your trailer.

One Spare 13” Standard 5 lug Steel Wheel/Tire (Fits Standard 5' Wide)

One standard 13” spare to match standard wheel/tire on 5 lug standard 2000 lb axle trailer. (Mount bracket must be purchased separately if desired)

One Spare 15” 6 Lug Steel Wheel/Tire-For 5200 lb Axle

Fits a 6 lug 5200 lb axle. This steel wheel spare fits all models ordered with the heavier capacity 5200 lb axle. (Mount bracket must be ordered separately if desired)

One Spare 15” Alloy Mag 5 lug Wheel/Tire

One 15” alloy mag matching spare to match mag upgrade on any 5 lug standard 3500 lb axle trailer. (Mount bracket must be purchased separately if desired)

One Spare 15” Alloy Mag 6 lug Wheel/Tire

One 15” alloy mag matching spare to match mag upgrade on any 6 lug 5200 lb axle trailer. (Mount bracket must be purchased separately if desired)

One Spare 15” Standard 5 lug Steel Wheel/Tire

One standard 15” spare to match standard wheel/tire on 5 lug standard 3500 lb axle trailer. (Mount bracket must be purchased separately if desired)

One Spare 16” 8 Lug Steel Wheel/RadialTire-For 6k or 7k lb Axle

Fits a standard 8 lug 6000 lb or 7000 lb axle.  (Mount bracket must be ordered separately if desired)

One Spare 16” Alloy Mag 8 lug Wheel/Tire

One 16” alloy mag matching spare to match mag upgrade on any 8 lug 6000# or 7000# axle trailer. (Mount bracket must be purchased separately if desired)

Spare Off-road 32” x 11.50 x 15” Mud Wheel/Tire (Fits 6-lug 5200# axle hub)

This spare wheel/tire fits the standard off road torsion 5200lb axle included in the off-road upgrade that is purchased separately. Price is per each spare.

Spare Off-road 32” x 11.50 x 15” Mud Wheel/Tire (Fits standard 5-lug 3500# axle hub)

This spare wheel/tire fits the standard off road torsion 3500lb axle included in the off-road upgrade that is purchased separately. Price is per each spare.

Spare Tire Mount Bracket-Inside On Any Model

Choose this to add a spare tire mount bracket installed on the inside (your choice location) of any model, bumper pull or gooseneck (inside or under the front riser on a gooseneck). Must add correct spare wheel/tire separately.

Spare Tire Mount Bracket-OUTSIDE FRONT On Any FLAT FRONT Model

Not available on a V-nose model. Choose this to add a spare tire mount bracket installed on the outside front tongue area on any bumper pull model with a flat front. If spare is desired, must add correct spare wheel/tire sold separately.

Upgrade Any Single Axle Model to 15” Radial Tires

This upgrades any standard single axle standard wheel model from 15” standard to 15” radial tires. (both tires)

Upgrade Any Tandem Axle Model to 15” Radial Tires

This upgrades any model with 15” standard tires to 15” radial tires. (all 4 tires)

15” Wide x 24” Tall Window Added in a Standard Side Door (or side wall)

Slider with screen. Centered in any side door. Can also be installed in any side wall.

24” Wide x 15” Tall Radius Window

Slider with screen. Your placement choice in any side wall.

44” Wide x 18” Tall Radius Window

Slider with screen. Your placement choice.