10' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

12' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

14' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

16' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

18' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

20' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

22' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

24' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

25' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

8' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

Weather Proof Shield Added on Any Awning Size

If ordering an awning in any size, add this option to have the weather proof shield cover on the awning when it is closed, to help protect the fabric from the elements.

6” I-Beam Main Frame Upgrade on Any Standard 3” or 4” Tube Frame Model

Upgrade any size standard with a 3” or 4” tube main frame to 6” I-Beam main frame.

Any Tandem Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

Any TRIPLE Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

CHANGE Single Axle Bumper Pull Model to STRAIGHT Leaf Spring Axle (From Standard Drop Leaf Spring) Any Width & Capacity

All Freedom bumper pull models are standard with drop leaf spring axles. This option will change the axle to a straight leaf spring axle and raise the floor deck of the trailer about 4” higher off the ground.

CHANGE Tandem Axles on Bumper Pull Model to STRAIGHT Leaf Spring Axles (From Standard Drop Leaf Spring) Any Width & Capacity

All Freedom bumper pull models are standard with drop leaf spring axles. This option will change the axles to straight leaf spring axles and raise the floor deck of the trailer about 4” higher off the ground.

CHANGE Triple Axles on Bumper Pull Model to STRAIGHT Leaf Spring Axles (From Standard Drop Leaf Spring) Any Width & Capacity

All Freedom bumper pull models are standard with drop leaf spring axles. This option will change the axles to straight leaf spring axles and raise the floor deck of the trailer about 4” higher off the ground.

Narrow Track SINGLE Axle Upgrade on Any 6' or 7' Wide SA Model (Places wheel well boxes inside trailer) Requires Separate Purchase Upgrade to 6” I-Beam Frame

Choose this option on any 6' or 7' wide single axle model if you want to place the wheels under the trailer with no outside fenders. Wheel well boxes will be on inside of trailer with exterior fender skirts. (Note: When ordering this option you must also separately purchase the upgrade to 6” I-beam frame)

Narrow Track TANDEM Axle Upgrade on Any 6' or 7' Wide TA Model (Places wheel well boxes inside trailer) Requires Separate Purchase Upgrade to 6” I-Beam Frame

Choose this option on any 6' or 7' wide tandem axle model if you want to place the wheels under the trailer with no outside fenders. Wheel well boxes will be on inside of trailer with exterior fender skirts. (Note: When ordering this option you must also separately purchase the upgrade to 6” I-beam frame)

Upgrade 26' or 28' Tandem Drop Leaf Axles Bumper Pull Model to TRIPLE 5200# TORSION Axles (15,600 GVWR) Available on 26- or 28' Only

Only available on 26' or 28' bumper pull models. Choose this to add a 3rd axle, upgrading it to triple 5200# torsion axles (15,600 GVWR).

Upgrade 34' TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to 8000# TORSION Axles

Only available on 8.5 x 34 bumper pull model. Choose this option to upgrade only the 34' long bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 8000# capacity TORSION axles. HD Tongue and jack.

Upgrade 34' TRIPLE Axle Standard 6-lug 5200# Drop Leaf Spring Axles Model to 10,000# TORSION 8-Lug Axles

Only available on 8.5 x 34 bumper pull model. Choose this option to upgrade only the 34' long model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 10,000# capacity TORSION axles. Also upgrades to the required 10” I-beam main frame, larger 17.5” wheels. HD Tongue and jack.

Upgrade Any Standard SINGLE 3500/2990# Idler (no brake) Axle Model to 3500# Single Axle w/Electric Brakes

This will upgrade any single axle model to an electric brake axle and adds the required safety breakaway kit. This axle requires your vehicle to have a brake controller and a 7-way plug on your vehicle as any trailer with electric brakes.

Upgrade From 8” I-Beam Main Frame to 10” I-Beam Main Frame (For 26' or Longer Goosenecks or Bumper Pulls) REQUIRED on ANY Model w/10k Axles Upgrade

Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are upgrading tandem or triple axles to 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering any 10k axle upgrade on any tandem or triple axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

Upgrade Tandem 3500# Drop Leaf Axles (7k GVWR) Bumper Pull Model to TRIPLE 5200# Drop Leaf Axles (15,600 GVWR)

Choose this to add a 3rd drop leaf spring axle to any standard 3500# tandem axle bumper model, upgrading it to triple 5200# drop leaf spring axles (15,600 GVWR). Also upgrades to 6-lug wheels and larger 15” tires

Upgrade Tandem 3500# Drop Leaf Axles (7k GVWR) Bumper Pull Model to TRIPLE 7000# Drop Leaf Axles (21,000 GVWR)

Choose this to add a 3rd drop leaf spring axle to any standard 3500# tandem axle bumper pull model, upgrading it to triple 7000# drop leaf spring axles (21,000 GVWR). Also upgrades to 8-lug 16” wheels and larger 16” tires. Upgrades to HD coupler and jack.

Upgrade Tandem 3500# Drop Leaf Axles (7k GVWR) Bumper Pull Model to TRIPLE 7000# TORSION Axles (21,000 GVWR)

Choose this to add a 3rd axle to any standard 3500# drop leaf tandem axle bumper pull model, upgrading it to triple 7000# TORSION axles (21,000 GVWR). Also upgrades to 8-lug 16” wheels. Upgrades to HD coupler and jack.

Upgrade Tandem 3500# Drop Leaf Axles Bumper Pull Model to TRIPLE 3500# Drop Leaf Axles (10,500 GVWR)

Choose this to add a 3rd axle of the same 3500# capacity on a standard tandem 3500# drop leaf axle model (7k GVWR), upgrading it to triple 3500# drop leaf spring axles (10,500 GVWR).

Upgrade Tandem 3500# Drop Leaf Axles Bumper Pull Model to TRIPLE 3500# TORSION Axles (10,500 GVWR)

Choose this to add a 3rd axle of the same 3500# capacity on a standard tandem 3500# drop leaf axle model (7k GVWR), upgrading it to triple 3500# TORSION axles (10,500 GVWR).

Upgrade TANDEM AXLE Bumper Pull Model From Standard 3500# Drop Leaf Axles to 10,000# TORSION Axles w/10” Frame Upgrade

Choose this to upgrade any bumper pull model standard with tandem 3500# (7k GVWR) drop leaf axles to maximum capacity 10,000# (20k GVWR) Torsion axles. Also upgrades the frame to 10” and upgrades to larger 17.5” wheels and to HD coupler and jack.

Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 3500# Torsion Axles

Choose this to upgrade any model standard with tandem 3500# drop leaf axles to same capacity in torsion axles.

Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 5200# Drop Leaf Spring Axles

Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 5200# drop leaf axles. with electric brakes.

Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 5200# TORSION Axles

Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 5200# and Torsion axles, with electric brakes.

Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 7000# Drop Leaf Spring Axles

Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 7000# drop leaf axles, with electric brakes. Also upgrades to larger 16” 8-lug wheels and HD coupler and jack.

Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 7000# TORSION Axles

Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 7000# Torsion axles, with electric brakes. Also upgrades to 16” 8-lug wheels and to HD coupler and jack.

Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 8000# TORSION Axles

Choose this to upgrade any bumper pull model standard with tandem 3500# (7k GVWR) drop leaf axles to more capacity 8000# (16k GVWR) Torsion axles. Also upgrades upgrades to 16” 8-lug wheels and to HD coupler and jack.

Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 10,000# Tandem TORSION Axles w/17.5” Wheels (Includes 10” Frame Upgrade)

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 10,000# TORSION axles. Also upgrades main frame to 10” I-Beam. Also upgrades to larger 17.5” wheels. Upgrades to HD coupler and jack.

Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# Tandem Drop Leaf Spring Axles

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 7000# tandem drop leaf spring axles. Also upgrade to larger 8-lug 16” wheels. Upgrades to HD coupler and jack.

Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# Tandem TORSION Axles

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 7000# TORSION axles. Also upgrades to larger 8-lug 16” wheels. Upgrades to HD coupler and jack.

Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 8000# Tandem TORSION Axles

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 8000# TORSION axles. Also upgrades from 15” 6-lug wheels to larger  16” 8-lug wheels.

Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to Same Capacity TORSION Axles

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to the same 5200# capacity TORSION axles.

Upgrade TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# Drop Leaf Spring Axles

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 7000# capacity drop leaf spring axles. Also upgrades to larger 8-lug 16” wheels. HD Tongue and jack.

Upgrade TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# TORSION Axles

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 7000# capacity TORSION axles. Also upgrades to larger 8-lug 16” wheels. HD Tongue and jack.

Upgrade TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to Same Capacity TORSION Axles

Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to the same 5200# capacity TORSION axles.

Any Tandem Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

Any TRIPLE Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

CHANGE Any TRIPLE Axle Gooseneck Standard w/7000# Triple Torsion Axles (21k GVWR) to TANDEM 8000# Torsion Axles (Reduces GVWR to 16k))

Choose this option to change any standard TRIPLE 7,000# torsion axle model to TANDEM 8,000# torsion axles. Reduces trailer total GVWR from 21,000# to 16,000# GVWR

Upgrade Any Gooseneck Triple Axle Model From Standard 7000# Torsion Axles to 8000# Torsion Axles

Choose this to upgrade any standard triple axle gooseneck model from 7,000# to 8,000# torsion axles.

Upgrade Any Standard 5200# Tandem Torsion Axle (10.4k GVWR) Gooseneck to TRIPLE 10,000# Torsion Axles (30k GVWR)

Choose this option to upgrade any tandem axle gooseneck model standard with tandem 5200# torsion axles, to TRIPLE 10,000# torsion axles. Also upgrades to 10” main frame and upgrades to 8-lug 17.5” wheels. This increases axle capacity, adds a third axle and increases the GVWR from 10,400# to 30,000#

Upgrade Any Standard 5200# Tandem Torsion Axle Gooseneck to TRIPLE 5200# Torsion Axles (Adds 3rd Axle)

Choose this option to upgrade any tandem axle gooseneck model from tandem 5200# torsion to triple# torsion axles. This adds a third 5200# axle with brakes and increases GVWR from 10,400# to 15,600#

Upgrade Any Standard 5200# Tandem Torsion Axle Gooseneck to TRIPLE 7000# Torsion Axles

Choose this option to upgrade any tandem axle gooseneck model from the standard tandem 5200# torsion to triple 7000# torsion axles. Also upgrades to 8-lug 16” wheels. This increases axle capacity and adds a third axle and increases the GVWR from 10,400# to 21,000#

Upgrade Any Standard 5200# Tandem Torsion Axle Gooseneck to TRIPLE 8000# Torsion Axles

Choose this option to upgrade any tandem axle gooseneck model from the standard tandem 5200# torsion to triple 8000# torsion axles. Also upgrades to 8-lug 16” wheels. This increases axle capacity and adds a third axle and increases the GVWR from 10,400# to 24,000#.

Upgrade Any TA Gooseneck From Standard 5200# Tandem Torsion Axles to 7000# Torsion Axles

Choose this option to upgrade any tandem axle gooseneck model from 5200# torsion to 7000# torsion axles. Also upgrades from 6-lug 15” wheels to 8-lug 16” wheels.

Upgrade Any TA Gooseneck From Standard 5200# Tandem Torsion Axles to 8000# Torsion Axles

Choose this option to upgrade any tandem axle gooseneck model from 5200# torsion to 8000# torsion axles. Also upgrades from 6-lug 15” wheels to 8-lug 16” wheels.

Upgrade Any TA Gooseneck From Standard 7000# Tandem Torsion Axles to 10,000# Torsion Axles w/17.5” Wheels (Includes 10” Frame Upgrade)

Choose this option to upgrade any tandem axle gooseneck model from standard 7000# torsion to 10,000# torsion axles. Also upgrades to 17.5” wheels and to the required 10” mainframe.

Upgrade Any TA Gooseneck From Standard 7000# Tandem Torsion Axles to 8000# Torsion Axles

Choose this option to upgrade any tandem axle gooseneck model from 7000# torsion to 8000# torsion axles.

Upgrade Any TA Gooseneck From Standard 7000# TANDEM Torsion Axles to TRIPLE 10,000# Torsion Axles w/17.5” Wheels (Adds 3rd Axle)

Choose this option to upgrade any tandem axle gooseneck model from tandem 7000# torsion to triple 10,000# torsion axles. Upgrades the axle capacity, adds a 3rd axle, Upgrades to required 10” mainframe.

Upgrade Any TRIPLE Axle Gooseneck From Standard 7000# Triple Torsion Axles to 10,000# Torsion Axles w/17.5 Wheels (Includes 10” Frame Upgrade)

Choose this option to upgrade any standard TRIPLE axle gooseneck model from 7000# torsion to 10,000# torsion axles. Also upgrades to 17.5” wheels and upgrades to the required 10” mainframe.

Upgrade Any TRIPLE Axle Gooseneck From Standard 7000# Triple Torsion Axles to 8000# Torsion Axles

Choose this option to upgrade any standard TRIPLE axle gooseneck model from 7000# torsion to 8000# torsion axles.

Upgrade From 8” I-Beam Main Frame to 10” I-Beam Main Frame (For 26' or Longer Goosenecks or Bumper Pulls) REQUIRED on ANY Model w/10k Axles Upgrade

Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are upgrading tandem or triple axles to 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering any 10k axle upgrade on any tandem or triple axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

Bathroom Metal Walls/Ceiling/Covered Floor Package (add-on for any bathroom with a shower)

NOTE: This is an add-on package. If you are buying a full or half bath package with a shower, and NOT buying metal walls/ceiling/covered floor in your entire trailer, you MUST add this package to be installed in your bathroom to keep bathroom from mildewing and rotting the plywood.

Dog Tub w/Water Service (Requires Minimum 7' Wide TA Model)

Includes: Dog bath tub w/sprayer, holding tanks with fill/drain valves, 2.5 gal 110V water heater, 12V or 110V water pump. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

Full-Bath 6'x8'' (with shower) Package (Requires Minimum 7' Wide TA Model-Metal Walls/Ceiling/Covered Floor)

This full-bath takes up 6-8' of inside box length depending on configuration. Includes: 32”x32” shower, toilet, holding tanks with fill/drain valves, 110V 2.5 gal water heater, choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light & roof vent, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired). IMPORTANT: If you are not purchasing metal walls/ceiling/rubber floor options for entire trailer, you must buy additionally the wall and floor covering package for bathroom to protect from mildew and rot.

Half-Bath 6'x6'(no shower) Package-(Requires Minimum 7' Wide TA Model)

This half-bath takes 6' of inside box length and width. Includes: Toilet, holding tanks with fill/drain valves, 2.5 gal 110V water heater,  choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light, GFI wall outlet. NO ROOF VENT INCLUDED. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

Shower & Sink Package-NO TOILET (Requires Minimum 7' Wide TA Model)

This package has no toilet. Includes: 32”x32” shower, holding tanks with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

Shower ONLY w/Water Service (Requires Minimum 7' Wide TA Model-Metal Walls/Ceiling/Covered Floor)

This package has no toilet, no sink, only a shower. Includes: 32”x32” shower, holding tanks with fill/drain valves, 2.5 gal 110V water heater, 12V or 110V water pump, plywood divider wall with door. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired). IMPORTANT: If you are not purchasing metal walls/ceiling/rubber floor options for entire trailer, you must buy additionally the wall and floor covering package for bathroom to protect from mildew and rot.

Tankless On-Demand Water Heater UPGRADE

This will upgrade from a standard 2.5 gal 110V water heater to an on-demand tankless 110V water heater. Must purchase electrical service separately if desired.

Toilet Only w/Water Supply (Minimum 7' Wide Tandem Axle Model)

Includes: Toilet, holding tanks, fill and drain valves, 12V battery power supply & 12V water pump, w/walls, door.

Urinal Added to Any Toilet Bath Package (wall mounted)

Add a urinal on the wall with any bath package you purchase separately that also has a toilet.

Water Heater UPGRADE From Standard 2.5 Gal to 12 Gal

If you are purchasing any water package separately that includes the 2.5 gal water heater, and want to upgrade to a larger capacity hot water heater, this will upgrade from the standard 2.5 gal to 12 gal capacity 110V water heater. Note: Electrical must be purchased separately if desired.

24” Wide Wardrobe Closet Floor-to-Ceiling (No Shelves)

Adds one 24” wide wardrobe closet your choice wall location.

Base ”L” Shaped 36” High Cabinet (To Turn Corner) Any Width Model

This adds 36” high ”L” base cabinet around corner and runs 3' down side wall with the L cabinet turning the corner. Must add on to any cabinet purchase if you want to run cabinet around the corner.

Base ”L” Shaped 36” High Cabinets Across Front Wall-Any Width Model

This adds 36” high base cabinets with doors and countertop across the front wall of any width trailer, with the L cabinet turning the corner.

Base Cabinets By the Foot-(36” High) Basic All Plywood Construction ($90 per foot)

Base cabinets with doors, installed on side walls by the foot. Constructed with plywood only. Add to cart then update cart to number of feet of cabinet you desire.

Base Cabinets By the Foot-(36” High) Deluxe Aluminum Frame w/Aluminum Over Plywood Countertop ($115 per foot)

Base cabinets with doors only, installed on side walls by the foot. Constructed with 5/16” square aluminum frame covered in .024 white aluminum metal. Add to cart then update cart to number of feet of cabinet you desire.

Base Cabinets Only w/Set of (4) Drawers Included-Straight Across 7' Wide Model (V-Nose Front Wall Only)

This adds only the 36” high base cabinets with doors, also includes a set of four drawers, with countertop across front wall on a 7' wide model. Has to be a V-nose front.

Base Cabinets Only w/Set of (4) Drawers Included-Straight Across 8.5' Wide Model (V-Nose Front Wall Only)

This adds only the 36” high base cabinets with doors, also includes a set of four drawers, with countertop across front wall on a 8.5' wide model. Has to be a V-nose front to accommodate drawers.

Base Cabinets Only-Straight Across 6' Wide Model V-Front or Flat Front Wall

This adds only the 36” high base cabinets with doors and countertop across front wall on a 6' wide model.

Base Cabinets Only-Straight Across 7' Wide Model V-Front or Flat Front Wall

This adds only the 36” high base cabinets with doors and countertop across front wall on a 7' wide model.

Base Cabinets Only-Straight Across 8.5' Wide Model V-Front or Flat Front Wall

This adds only the 36” high base cabinets with doors and countertop across front wall on a 8.5 ' wide model.

Cabinet (Floor to Ceiling) 12” Deep Metal Cabinet Up to 96” Tall (Price per foot of width-Min 2')

Metal cabinet 12” deep with doors, minimum 2' wide and up to 96” tall. NO SHELVES INCLUDED. Add shelves separately if desired. Price is per foot of width. Add to cart and change cart to desired feet. (your desired placement)

Cabinet (Floor to Ceiling) 24” Deep Metal Cabinet Up to 96” Tall (Price per foot of width-Min 2')

Metal cabinet 24” deep with doors, minimum 2' wide and up to 96” tall. NO SHELVES INCLUDED. Add shelves separately if desired. Price is per foot of width. Add to cart and change cart to desired feet. (your desired placement)

Cabinet (Floor to Ceiling)18” Deep Metal Cabinet Up to 96” Tall (Price per foot of width-Min 2')

Metal cabinet 18” deep with doors, minimum 2' wide and up to 96” tall. NO SHELVES INCLUDED. Add shelves separately if desired. Price is per foot of width. Add to cart and change cart to desired feet. (your desired placement)

Countertop Work Table-Aluminum Covered Over Plywood-24” Deep ($80 Per foot)

This table top is plywood covered in mill finish aluminum. Can be added on your choice side wall location. Price is per foot. Add to cart then update cart to number of total feet of work table you desire.

Countertop Work Table-Stainless Steel (non-polished) 24” Deep ($140 Per foot)

Can be added on your choice side wall location. Price is per foot. Add to cart then update cart to number of total feet of work table you desire.

Drawers (Set of 4) Added in Any Base Cabinets

If you are adding 36” high base cabinets and want to add a set of four drawers in the cabinets, add this option along with your base cabinet selection.

Fenderwell Cabinets Any 8.5 Wide Tandem Axle-Up to 90” Inside Height

Cabinets installed over the inside fender well box on either side.

Fenderwell Cabinets Any 8.5 Wide Tandem Axle-w/Over 90” Inside Height

Cabinets installed over the inside fender well box on either side.

Fenderwell Cabinets Any 8.5 Wide TRIPLE Axle-Up to 90” Inside Height

Cabinets installed over the inside fender well box on either side.

Fenderwell Cabinets Any 8.5 Wide TRIPLE Axle-w/Over 90” Inside Height

Cabinets installed over the inside fender well box on either side.

Helmet Cabinet w/Clothing Rod

Store your helmet and hang clothes.

L-Shaped Base Cabinet w/Generator Storage Box w/Vented Generator Door

Adds L-shaped base cabinet in front corner, with an inside generator storage box, vented outside access door.

Serving-Prep Shelf w/Fold-Down Brackets-12” Deep Wrapped In Aluminum ($52 per foot)

This is a 12” fold down shelf on brackets for inside or outside use, normally outside under a concession door, but can be used inside. Add to cart then update cart to how long you want each fold-down shelf you desire.

Serving-Prep Shelf w/Fold-Down Brackets-18” Deep Wrapped In Aluminum ($55 per foot)

This is a 18” fold down shelf on brackets for inside or outside use, normally outside under a concession door, but can be used inside. Add to cart then update cart to how long you want each fold-down shelf you desire.

Shelf Added Inside Base or Overhead Cabinet-Plywood ($32 per foot)

Plywood shelf inside a base or overhead cabinet. Price is per foot. Add to cart then update cart to number of feet of shelf to match number of feet of plywood cabinets you are ordering.

Shelf Added Inside Base or Overhead Cabinet-Plywood Wrapped in Aluminum ($50 per foot)

Plywood shelf wrapped in aluminum, inside a base or overhead cabinet. Price is per foot. Add to cart then update cart to number of feet of shelf to match number of feet of plywood wrapped in aluminum  cabinets you are ordering.

Shelf in Fenderwell or Floor to Ceiling Cabinets Only (Price per foot of each shelf)

Choose this option to add shelving only when purchasing a fenderwell or floor to ceiling cabinet. Price per foot of shelf. Example: You order 4' wide cabinet, you want three 4' wide shelves, order 12' of shelf. (4' x 3 shelves= 12').

Shelf on Wall-24” Deep Plywood w/Lip ($30 per foot)

Plywood shelf with a lip edge. Mounted your choice wall location. Price is per foot. Add to cart then update cart to number of feet of shelf you want.

Shelf w/Legs-12” Deep Wrapped in Aluminum ($50 per foot)

This is a 12” deep shelf on stationary legs. Can be placed on any wall at your height choice. Price is per foot and per shelf. Add to cart then update cart to how long you want the shelf.

Shelf w/Legs-18” Deep Wrapped in Aluminum ($52 per foot)

This is a 18” deep shelf on stationary legs. Can be placed on any wall at your height choice. Price is per foot and per shelf. Add to cart then update cart to how long you want the shelf.

Shelf w/Lip-Plywood Across V-Nose Depth (6'-7' Wide Models)

Adds a plywood shelf with a lip across the V-nose area.

Shelf w/Lip-Plywood Across V-Nose Depth (8.5' Wide Models)

Adds a plywood shelf with a lip across the V-nose area.

Upper Cabinets By The Foot-(18” High) Aluminum Frame Covered in Aluminum Metal ($80 Per Foot)

Upper cabinets with doors. Built with 5/16” aluminum tube frame covered in .024 white metal. Installed on side wall. Add to cart then upgrade cart to number of feet of upper cabinet you desire. Price is per foot.

Upper Cabinets Only-Straight Across 6' Wide Model V-Front or Flat Front Wall

This adds only the 18” high upper cabinets with doors across front wall on a 6' wide model.

Upper Cabinets Only-Straight Across 7' Wide Model V-Front or Flat Front Wall

This adds only the 18” high upper cabinets with doors across front wall on a 7' wide model.

Upper Cabinets Only-Straight Across 8.5' Wide Model V-Front or Flat Front Wall

This adds only the 18” high upper cabinets with doors across front wall on a 8.5' wide model.

3' High x 10' Long (Longest Available) Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 10' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 4' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 4' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 5' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 5' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 6' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 6' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 8' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

3' High x 8' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

4' High x 2' Long Concession Lift-up Door

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

4' High x 2' Wide (Smallest) Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

4' High x 6' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

4' High x 6' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

4' High x 8' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

4' High x 8' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

5' High x 10' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

5' High x 8' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

Blackout Frame Trim on Any Size Concession Door

If purchasing a blackout trailer and also ordering a concession door, if you want the trim on concession door also blacked out, you must also purchase this option separately.

Double Doors Under Any Length Concession Door

Will be same total length as the concession door above the double doors. Note: Concession door must be purchased separately.

Double Swing-Open Doors Under Any Size Concession Door

Add this option for access under a concession door.

Fold-Down Door Under Any Size Concession Door

Add  this fold-down door for access under a concession door.

Gull Wing Lift Up Awning Door on Side-Any Model (Price Per Foot of Door Width)

Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

Marquee 36” Tall Sign on Roof-Folds Up/Down Includes Full Walk-on Roof ($75 PLF)

Price is calculated x per linear foot of the entire length of the trailer you select. Price includes the walk-on roof the full length of the trailer and marquee sign on one side the full length of the trailer. Note: You can purchase a roof access ladder, corner pie pieces for ends of sign and  removable pull pins for sign separately, if desired.

Marquee Fold-Up/Down Sign Option Added to Any Concession Door ($50 Per Foot of Concession Door Length)

If ordering a concession door and want the fold-up/down marquee sign option added on top of door, choose this option. Price is x per foot of the length concession door you order. Add to cart then update cart to door length. Example: 3 x 6 concession door=6' of marquee added to cart.

Marquee Roof Sign-Corner Pie Pieces (each)

Add-on to marquee roof sign purchase. Price is per pie piece. Pie piece goes at the ends of the roof marquee sign.

Marquee Roof Sign-Pull Pins for Sign Removable (per pin-minimum 2)

Price is per pin. If you want to be able to take sign off and on, add at least 2 pull pins. For sign sections add 2 pins per section.

Serving Shelf-Aluminum-Fold Down-12” Deep (used outside or inside) Price Per Each Foot of Shelf

Choose this to add a fold down shelf under your concession serving window/door. 12” deep aluminum shelf on fold down brackets. Normally used outside but can also be used inside. Add to cart and them change quantity in cart to length needed. Example: 3x6 concession window/door=6' of shelf.

Serving Shelf-Aluminum-On Legs-12” Deep (used inside) Price Per Each Foot of Shelf

Choose this to add an inside shelf on stationary legs anywhere inside a trailer.  12” deep aluminum covered. Add to cart and them change quantity in cart to length needed.

6' Tall Rear Ramp Gate on Hybrid ILO Standard 4' Tall Ramp

Choose this is you want a taller rear ramp gate on a hybrid model.

Aluminum Tread Plate (ATP) Down Sides w/Long Open Rails on Hybrid Model ($10 per foot of hybrid deck)

Add on any hybrid. Price is per foot of deck length. Add to cart then update cart to quantity matching your chosen hybrid deck length.

Bi-Fold Rear Ramp on Hybrid Model

Ramp gate folds.

Bi-Fold Rear Ramp w/ Spring Assist on Hybrid Model

Ramp gate folds and has the added spring assist.

Bi-Fold Rear Ramp w/ Spring Assist w/ 36” Tall Open Sides on Hybrid Model

Increases from standard 24” open sides to 36” open sides. Ramp gate folds and has the added spring assist.

Double Rear Barn Doors on Enclosed Box on Hybrid Model

Add double rear door access to enclosed box area from hybrid deck.

Expanded Metal (Mesh) Added to Standard 24” Open Sides on Any Hybrid Model ($26 per foot of open deck length)

Choose this option to add expanded wire mesh on the standard open 24” rails on a hybrid conversion. Price is per foot of hybrid deck. Add to cart then update cart to number of feet of open rear deck you are purchasing.

Expanded Metal (Mesh) Covered Taller 36” Sides on Any Hybrid Model ($35 per foot of open deck length)

Choose this option to increase to 36” tall sides and with expanded wire mesh on 36” tall rails on a hybrid conversion. Price is per foot of hybrid deck. Add to cart then update cart to number of feet of open rear deck you are purchasing.

Hybrid Rear Open Deck Conversion ($20 Per Foot of Open Deck) *Shown w/other available options

Shown in picture with optional upgrade to wire mesh sides and double rear barn doors. Chose this to CONVERT the rear of a standard 7' or 8.5' wide model to an open rear deck. Price includes: 4' tall rear ramp gate, 24” tall open side rails, treated 2x6 deck floor. Price is per foot times the length you want your open deck. Example: 8.5x20' trailer with 12' open rear deck will have 8' enclosed front box and 12' open rear deck. Add to cart then change quantity in cart to how long you want your open deck. This only converts length to open deck, does NOT add any trailer length.

Porch Floor Upgraded to 1/8” Steel ILO Standard ATP Covered Plywood ($110 per foot of porch)

This upgrades to an all steel floor deck from the standard ATP  covered plywood deck that comes included in the porch conversion price. Add as many feet of steel floor into your cart to match the number of feet you selected for your porch length.

Rear Porch-Convert Trailer Length to Any Size Covered Porch ($140 per foot of porch)

This option will CONVERT the rear section of any 7' or 8.5 wide model to a covered rear porch. Price includes: Your choice of 36” tall open side rails, or half wall covered in matching exterior metal, ATP covering over standard plywood floor. Price is per foot x the length you want your porch. This only converts length to a porch, does NOT add any length to your trailer. Add to cart, then update cart to the number of feet length you want your rear porch. Example: 8.5 x 20' trailer, with 8' porch purchase. Enclosed box will be 12' and porch will be 8'

3' Tall x 4' Long x 12” Deep Shadow/Tailgater Box w/ Locking Awning Door, 110v Outlet

This option will add a 3' tall x 4' long x 12” deep carpeted plywood shadow box with a locking concession awning lift door over it, and one 110v outlet in the box for your TV, etc. (Outlet will not be wired to any power unless electric package also purchased separately).

3' Tall x 5' Long x 12” Deep Shadow/Tailgater Box w/ Locking Awning Door, 110v Outlet

This option will add a 3' tall x 5' long x 12” deep carpeted plywood shadow box with a locking concession awning lift door over it, and one 110v outlet in the box for your TV, etc. (Outlet will not be wired to any power unless electric package also purchased separately).

3' Tall x 6' Long x 12” Deep Shadow/Tailgater Box w/ Locking Awning Door, 110v Outlet

This option will add a 3' tall x 6' long x 12” deep carpeted plywood shadow box with a locking concession awning lift door over it, and one 110v outlet in the box for your TV, etc. (Outlet will not be wired to any power unless electric package also purchased separately).

3' Tall x 8' Long x 12” Deep Shadow/Tailgater Box w/ Locking Awning Door, 110v Outlet

This option will add a 3' tall x 8' long x 12” deep carpeted plywood shadow box with a locking concession awning lift door over it, and one 110v outlet in the box for your TV, etc. (Outlet will not be wired to any power unless electric package also purchased separately).

4' Tall x 6' Long x 12” Deep Shadow/Tailgater Box w/ Locking Awning Door, 110v Outlet

This option will add a 4' tall x 6' long x 12” deep carpeted plywood shadow box with a locking concession awning lift door over it, and one 110v outlet in the box for your TV, etc. (Outlet will not be wired to any power unless electric package also purchased separately).

4' Tall x 8' Long x 12” Deep Shadow/Tailgater Box w/ Locking Awning Door, 110v Outlet

This option will add a 4' tall x 8' long x 12” deep carpeted plywood shadow box with a locking concession awning lift door over it, and one 110v outlet in the box for your TV, etc. (Outlet will not be wired to any power unless electric package also purchased separately).

Access Door 24” x 24”

Add on any model at your location choice.

Baggage Door 36” x 36”

Add on any model at your location choice.

Cable/Fuel Door 12” x 12”

Add on any model at your location choice.

Cooler Compartment (Insulated) w/ Slides, Tray and Solid Door

Installed on the side of any model in your desired location.

Cooler Insulated Compartment w/Tray, Slides, Solid Door

Add on any model.

Generator Door 36” x 36” (Non-vented)

Add on any model at your location choice.

Generator Door 36” x 36” (Vented)

Add on any model at your location choice. Door is approximately 36” x 36”

Generator Enclosed 3' Compartment in Gooseneck Riser (for your after-market generator install)

For your after-market installation of your generator, fuel tank, etc. Completely enclosed 3' compartment in front 3' of gooseneck riser. Includes: Double door front riser access with expanded metal in doors. 3' of expanded metal floor deck starting at front of riser. Plywood wall from floor deck to ceiling across full width of riser at 3' back from front of riser, white or mill finish metal on all inside walls and ceiling of compartment. Note: Add expanded metal sides, roof vents, etc separately.

Generator Enclosed 4' Compartment in Gooseneck Riser (for your after-market generator install)

For your after-market installation of your generator, fuel tank, etc. Completely enclosed 4' compartment in front 4' of gooseneck riser. Includes: Double door front riser access with expanded metal in doors. 4' of expanded metal floor deck starting at front of riser. Plywood wall from floor deck to ceiling across full width of riser at 4' back from front of riser, white or mill finish metal on all inside walls and ceiling of compartment. Note: Add expanded metal sides, roof vents, etc separately.

Generator Enclosure on GN Riser-ADD Expanded Metal to BOTH Sides of Enclosure

Must first select and add your choice of the 3' or 4' generator enclosure option separately. Add this option if you also want expended metal sides on enclosure for more ventilation.

Generator Inside Slide-out Tray w/Slides (Fits 36” Wide Inside or Outside Generator Storage Box)

If you are purchasing the generator inside or outside storage box separately, choose this if you want to add a slide-out tray for your generator to be mounted on. Allows easy out/in for running and servicing.

Generator Platform Mounted on 60” Extended Triple Tube Tongue-Covered in ATP (Flat Front Models)

Yhis is a platform available only on flat front models. Select flat front option separately or if you choose this option your trailer will automatically switch to a flat front to accommodate platform..

Generator Protruding Storage Box in Front-1/2 Inside-1/2 Outside w/Slider Tray

Stores generator on a slider tray and is half in and half out of trailer front.

Generator Storage Box Inside Trailer w/36” Vented Generator Door (36” High x 36” Wide x 36” Deep)

Note: Net opening about 34” x 34”. Normally installed near front of trailer on driver side. Can be placed at your location choice. NOTE: Must add generator slider tray separately to mount your generator on and to easily slide-out generator.

Generator Storage Box on Front Tongue (36”x36”) Requires Flat Front or 24” Extended Tongue Option on V-Nose Model

ATP covered storage box for your generator. Mounted on front tongue and you must switch to a flat front (no V-nose) or you must add the 24” extended tongue option to have room on the tongue area for the 36” x 36” generator stotage box. Add a slideout tray separately if desired..

Gull Wing Lift Up Awning Door on Side-Any Model (Price Per Foot of Door Width)

Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

L-Shaped Base Cabinet w/Generator Storage Box w/Vented Generator Door

Adds L-shaped base cabinet in front corner, with an inside generator storage box, vented outside access door.

Vent Panel-Louvered (Stationary) 24”x24”

Can be placed in a side door or in the side wall at your specified location.

Vent Panel-Louvered (Stationary) 36”x36”

Can be placed in the side wall at your specified location.

36” Wide Ramp Door In the Front V-Nose

Add in V-nose normally on curbside, on any V-nose model.

36” Wide Side Ramp Door

Add on side of any trailer provided trailer length will accommodate your chosen location.

48” Wide Ramp Door In the Front V-Nose w/15” Extended Triple Tube Tongue & V-Nose

Add in V-nose normally on curbside, on any V-nose model. Also includes the required 15” triple tube tongue & V-nose.

48” Wide Side Ramp Door

Add on side of any trailer provided trailer length will accommodate your chosen location.

60” Wide Ramp Door In the Front V-Nose w/15” Extended Triple Tube Tongue & V-Nose

Add in V-nose normally on curbside, on any V-nose model. Also includes the required 15” extended triple tube tongue & V-nose.

60” Wide Side Ramp Door

Add on side of any trailer provided trailer length will accommodate your chosen location.

72” Wide Side Ramp Door

Add on side of any trailer provided trailer length will accommodate your chosen location.

ADD Expanded Metal (wire mesh) Tops on Slide-in 5' Long Ladder Style Load Ramps

If you are purchasing the ladder style slide-in load ramps option, choose this option to add expanded metal tops on both ramps.

ATP Covering on Standard 16” Plywood Ramp Door Flap Only

Add ATP covering just on the standard 16” ramp door flap.

Barn Swing Double Rear Doors ILO Ramp Door-Any Size-(Change Fee)

Choose this change option if you want double rear swing barn doors instead of the standard ramp rear door on any size. Also will delete the no-show beavertail floor on all 8.5 wide models. (photo for illustration purposes only)

Barn Swing DOUBLE REAR DOORS w/5 Slide-out Steel ”Ladder Style” Load Ramps (NO RAMP DOOR)

Choose this option if you want double rear swing barn doors (instead of ramp rear door) along with a pair of 5' long slide-out steel ladder style light duty load ramps (for cycle, golf cart, side-by-side, mower, etc) NOT FOR CAR

Double Spring Assist on Rear Ramp Door (recommended on any ramp door over 7'6” tall)

Highly recommended on any ramp door with extra height added on trailer. Standard on Super Duty Door upgrade. Adds a second spring and assists in raising or lowering rear ramp door. Note: The max height for any rear ramp door is 8'6” no matter how tall the trailer is inside.

Dutch (1/2) Door Conversion Under Any Width Side Door

This upgrade will convert a standard side door into a Dutch style door, (top half and bottom half). Side door purchased separately if not already included on your model.

Escape Door (Blackout Frame) 54” x 48” w/Bar Lock (used with a blackout trailer)

If purchasing blackout package separately, this is the escape door option to add. Normally used on 8.5 wide car hauler models and mounted over fenders on driver side for easy side exit.

Escape Door 54” x 48” w/Bar Lock

Normally used on 8.5 wide car hauler models and mounted over fenders on driver side for easy side exit.

Gull Wing Lift Up Awning Door on Side-Any Model (Price Per Foot of Door Width)

Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

Ramp Door & Flap Covered in ATP-Any Size Ramp Door

Covers any ramp door and the flap end in aluminum tread plate.

Ramp Door & Flap Covered in Black Rubber Tread Plate-Any Size Ramp Door

Covers any ramp door and the flap end in black rubber tread plate.

Ramp Door 12v Power 5k Electric Winch w/Battery for Extra Tall Rear HD/SD Ramp Door

This adds a 12v electric power winch mounted on a winch plate in ceiling, with a cable to the ramp door for raising and lowering, with a 12v deep cycle battery in box. This option is suggested if you have a HD or Super Duty (SD) rear ramp door that will be 8' tall or taller.

Ramp Door Electric Hydraulic Lift-Upgrade

If ordering a trailer with a ramp door, choose this option to upgrade to an electric hydraulic lift with one 12v powered lift to easily raise and lower any ramp door. Includes the required 12v deep cycle marine battery recessed in floor, wireless remote control.  This is an upgrade from the standard manual lift ramp door.

Ramp RACKS ONLY to Hold After-Market Slide-in Load Ramps (underneath trailer)

This will add a pair of racks to hold your after-market purchase of slide-in load ramps. Ramps are not included.

Rear Ramp Door EXTRA Hinges (each)

Add extra ramp door hinges if desired. Standard that come on 6' and 7' wide models= 2 hinges. Standard on 8.5 wide models=3 hinges.

Side Added 32” x 66” RV Type Door w/Window and Full Screen Door (Fits 6' & 7' Wide Models)

This adds a camper RV type door with a window in door and a full screen door. Can be placed at your location choice in any 6' or 7' wide trailer side.

Side Added 36” x 78” RV Type Door w/Window and Full Screen Door (Any Models)

This adds a camper RV type door with a window in door and a full screen door. Can be placed at your location choice in any 8.5 wide trailer side. (or a 6' or 7' wide model with height added to at least 81” inside height)

Side Door Added-24” x 78” w/Bar Lock

Adds additional side door in your choice side location. Requires trailer with enough inside height.

Side Door Added-32” x 70” w/Flush Key Lock

Adds additional side door in your choice side location. Requires trailer with enough inside height.

Side Door Added-32” x 78” w/Flush Key Lock

Adds additional side door in your choice side location. Requires trailer with enough inside height.

Side Door Added-36” x 70” w/Flush Key Lock

Adds additional side door in your choice side location. Requires trailer with enough inside height.

Side Door Added-36” x 78” w/Flush Key Lock

Adds additional side door in your choice side location. Requires trailer with enough inside height.

Side Door Added-48” x 78” w/Flush Key Lock

Adds additional side door in your choice side location. Requires trailer with enough inside height.

Side Door Moved Into V-Nose Front

This will move any standard side door from side of trailer into the curbside front V-nose.

Side Door Pull-out RV Style Door Step

Can be added under any side door. Mounted in frame under side door. Manually pulled in and out.

Side Double Door Added-60” x 78”

Adds additional side double doors in your choice side location. Requires trailer with enough inside height and length to accommodate door.

Stage Jacks (HD Drop Down) on Any Rear Ramp Door

This adds a pair of drop down adjustable jacks on a ramp rear door, allowing the door to be used as a walk-on stage or rear deck.

Steel 1/8”Tread Plate In Lieu of Plywood on Any Rear Ramp Door & Flap

Converts any width model with a ramp door from plywood ramp rear door with plywood ground end flap, to 1/8” steel tread plate on ramp door with steel flap on ground end. (NOTE: steel transition flap over hinges must be purchased separately if desired).

Transition Flap (Steel) Ramp Door onto Floor

Add on any ramp rear door model to cover the hinge open space area between door and trailer floor for easier crossover.

Transition Flap-Aluminum Tread Plate (ATP) Ramp Door onto Floor

Add on any ramp rear door model to cover the hinge open space area between door and trailer floor for easier crossover.

Upgrade 6' or 7' Wide to HD Ramp Door (4500# Capacity)

Choose this to upgrade from the standard 2000# capacity ramp rear door. Note: This HD door comes standard on 8.5 wide models.

Upgrade 8.5 Wide to Super Duty Ramp Rear Door (6000# Capacity) To Max 8'6 Tall Door Height

Choose this to upgrade from the standard HD (4500#) capacity ramp rear door. Includes: 2x3 tubing, 1/4” angle, double spring assist, pads. When adding additional height to trailer, this super duty door height can only go up to 8'6” tall max.

Upgrade Any Width Side Door to 48” Side Ramp Door

Converts any standard side door to a 48” wide ramp door. Must be sure you have ample room in front of fenders on side.

Upgrade Any Width Side Door to 60” Side Ramp Door

Converts any standard side door to a 48” wide ramp door. Must have ample room in front of fenders for door width to fit.

Upgrade Standard 16” Plywood Flap on Ramp Door Ground End to 36” Aluminum Treadplate (ATP) Covered Flap

Upgrades from 16' plywood flip flap on ramp door ground end to a 36” aluminum treadplate (ATP) covered over plywood flap.

Upgrade Standard 16” Plywood Flap on Ramp Door Ground End to 36” Steel Treadplate Flap

Upgrades from 16' plywood flip flap on ramp door ground end to a 36” steel treadplate flap.

Upgrade Standard 32” Side Door (6' or 7' Wide Models) to 32” x 66” RV Door w/Window and Full Screen Door

This upgrades to a camper RV door with a window in door and a full screen door.

Upgrade Standard 32” Side Door to 36” (6' or 7' Wide Models)

Upgrades door width

Upgrade Standard 32” Side Door to 48” (6' or 7' Wide Models)

Upgrades door width. Must have ample room on side in front of fenders.

Upgrade Standard 36” Side Door (8.5 Wide Models) to 36” x 78” RV Door w/Window and Full Screen Door

This upgrades to a camper type RV door with a window in door and a full screen door.

Upgrade Standard 36” Side Door to 48” (8.5 Wide Models)

Upgrades door width. Must have ample room on side in front of fenders.

Upgrade Standard 36” Side Door to 48” DOUBLE Side Door (8.5 Wide Models)

Upgrades door width and from single to double door. Must have ample room on side in front of fenders.

Upgrade Standard 36” Side Door to 60” DOUBLE Side Door (8.5 Wide Models)

Upgrades door width and from single to double door. Must have ample room on side in front of fenders.

Upgrade to Longer 36” Plywood Flap & Covered in ATP on Ramp Door w/Wedges & Big Bumpers

Upgrades from standard 16” plywood flap on ramp door to 36” plywood flap and covered in aluminum treadplate.

Upgrade to Longer 36” Plywood Flap on Ramp Door w/Wedges & Big Bumpers

Upgrades from standard 16” plywood flap on ramp door

Wider Opening Rear Ramp Door on 8.5 Wide Models w/Slimline LED Lights & Twist Door Locks

Available on 8.5 wide models. This adds the most possible width opening on any 8.5 model rear ramp door. Standard model rear ramp opening width is approx 91”, adding this custom option widens the door opening to approx 95”

100 AMP Complete Electrical Package (20-Breaker Slot Panel)-100 AMP Required for 220V Service

Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V 48” Strip LED lights, converter, 100 AMP panel box service with 20 breaker slots.  50 AMP lifeline cord, floor drop hatch for cord. IMPORTANT NOTICE: You will ONLY have 12v power coming from your vehicle (when trailer plugged in) UNLESS you also purchase the optional 12V deep cycle marine battery in a battery box with a trickle charger to be wired to power all 12v. You may also purchase an optional 50 AMP motor base plug mounted on front exterior to convert lifeline cord to twist on removable.

12V Battery Power Supply ”Recessed in Floor” Storage Compartment (Requires minimum 6” main Frame)

Includes 12V on board deep cycle battery power supply wired to all 12V items, with trickle charger,  is recessed in a battery storage compartment in the floor. Must be at least a 6” mainframe model or must upgrade frame to 6” at additional cost.

12V Deep Cycle Marine Battery ”On Board” In a Battery Box (Recommended)

Choose this to have all your 12v items wired to an on board 12v deep cycle marine battery, powering all 12v items. Can be purchased with or without a complete electrical package.

12v Solar Charge EXTRA Panel (Add-on to Solar Basic System Purchase for More AMPS/Watts) Per each panel roof mounted

This will add an additional 3-AMP Solar Panel to the basic solar charging system that you must purchase separately. (must also purchase deep cycle battery in a box separately if desired). This option will add one extra (1) 3-AMP solar panel roof mounted. You may add as many extra panels as you desire provided they will fit on your trailer roof.

12v Solar Charging Basic 400 Watts System (Purchase Separately or Add-on to Any Electrical Package Purchase)

This solar charging system is used to charge a 12v on-board battery; with or without purchasing a complete electrical package sold separately. (must also purchase deep cycle battery in a box separately if desired). This Solar Charging System Includes: One (1) 21” x 40” 400 watts, 3.3 AMPS solar panel, roof mounted on ATP covered wood base plate, (additional panels may be purchased and added separately). If you also purchase a 12v deep cycle battery the roof mounted solar panel(s) will be wired to the battery for solar charging. If no battery is purchased, wires from solar panel(s) will be stubbed inside trailer for your after-market install.

30 AMP Complete Electrical Package (6-Breaker Slot Panel)

Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-48” Strip LED lights, converter, 30 AMP panel box service with 6-breaker slots, 30 AMP lifeline cord. IMPORTANT NOTICE: You will ONLY have 12v power coming from your vehicle (when trailer plugged in) UNLESS you also purchase the optional 12V deep cycle marine battery in a battery box with a trickle charger to be wired to power all 12v. You may also purchase an optional 30 AMP motor base plug mounted on front exterior to convert lifeline cord to twist on removable.

50 AMP Complete Electrical Package (16-Breaker Slot Panel)

Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-48” strip LED lights, converter, 50 AMP panel box service with 16 breaker slots, 50 AMP lifeline cord. IMPORTANT NOTICE: You will ONLY have 12v power coming from your vehicle (when trailer plugged in) UNLESS you also purchase the optional 12V deep cycle marine battery in a battery box with a trickle charger to be wired to power all 12v. You may also purchase an optional 50 AMP motor base plug mounted on front exterior to convert lifeline cord to twist on removable.

110V 20 AMP Wall Receptacle (ea)

Adds extra 110V wall outlet.

110V GFI 20 AMP Receptacle (Interior or Exterior)

Adds a GFI outlet.

110V Stub-out w/Switch (For After-market use)

If purchasing a 110V electrical package with panel box, and you need a wire stub ran to a point in the trailer for your after-market install of an electrical item, add this stub with a wall switch.

12V Battery Power Supply ”Recessed in Floor” Storage Compartment (Requires minimum 6” main Frame)

Includes 12V on board deep cycle battery power supply wired to all 12V items, with trickle charger,  is recessed in a battery storage compartment in the floor. Must be at least a 6” mainframe model or must upgrade frame to 6” at additional cost.

12V Battery Storage Compartment ONLY ”Recessed in Floor” NO BATTERY (Requires minimum 6” main Frame)

Battery NOT included. This is ONLY the recessed in the floor floor battery storage compartment for your after market install of your battery. Must be at least a 6” mainframe model or must upgrade frame to 6” at additional cost.

12V Deep Cycle Marine Battery ”On Board” In a Battery Box (Recommended)

Choose this to have all your 12v items wired to an on board 12v deep cycle marine battery, powering all 12v items. Can be purchased with or without a complete electrical package.

12V Exterior Marker Light-Extra Red or Amber (ea ) Minimum 2

Must order in pairs (takes one marker light on each side). Add to cart then update quantity in cart to even numbers (Example 2,4,6) Specify red or amber in your checkout notes. Add as many extra lights as you want.

12V Inside LED Dome Light (each)

All trailers come standard with one 12V inside dome light. Add as many extra dome lights as you desire. Normally they will be evenly spaced in trailer unless otherwise specified.

12V Interior Wall Switch for 12V Lights or 12v Stub-out (each)

Additional wall light switch for any 12V lights or 12v stub-out separate purchase. (Electric packages come with wall switch for included lights).

12V LED 24” Exterior Racing Light w/Switch (ea)

For exterior wall mount. Your choice location on any side. Includes a switch. Multiple lights will all be on one switch per side.

12V Powered 5k Capacity Electric Winch Only-No Battery Included

Add on with a winch plate purchase or a recessed winch box purchase, if desired. This option is for winch only.

12V Powered 5k Capacity Electric Winch w/12V Deep Cycle Battery

Add on with a winch plate purchase or a recessed winch box purchase, if desired. Includes 12V battery and remote control to winch.

12V Stub-out (For After-market use)

If also ordering a 12v on board battery power supply and you need a 12v wire stub ran to a point in the trailer for your after-market install of a 12v powered electrical item, add this stub. If you also want it on a switch, add the 12v switch separately.

220V Interior Receptacle (Requires 100 AMP Panel Box Service)

MUST BE WITHIN 10' of PANEL BBOX OR EXTRA CHARGE FOR WIRING WILL APPLY. REQUIRES 100 AMP Panel Box. Must send picture of your 220 plug configuration or the most common will be installed. Price for one 220v receptacle on an included double pole 30 AMP dedicated breaker.

30 AMP Motorbase Exterior Plug w/Twist-Lock Cord ILO of Standard Lifeline Floor Drop Cord

Choose this to switch to a a loose twist-lock cord to supply power through an exterior motor base plug instead of the standard inside drop lifeline cord.

48” 12V Interior LED Light (each)

Choose this to add extra inside 12V 48” strip light. Price per each light.

50 AMP Motor Base Exterior Plug w/Twist-Lock Cord ILO of Standard Lifeline Floor Drop Cord

Choose this to switch to a a loose twist-lock cord to supply power through an exterior motor base plug instead of the standard inside drop lifeline cord.

7-Way Round Light Plug & Harness UPGRADE from Standard Flat 4-Pin Plug

If adding back-up lights to a single axle trailer with no brakes, this plug is required. Single axle no brake trailers come with only a flat 4-pin light plug. This upgrades any single axle trailer from a flat 4-pin plug to the 7-way round plug and harness standard on trailers that have electric brakes.

72” 12V Interior LED Light (each)

Choose this to add extra inside 12V light 72” long. Price per each light.

Back-up (Reverse) 12V LED Lights (Requires 7-Way Light Plug Harness)

If adding to a single axle no brake trailer, must also purchase the 7-way plug upgrade separately for back-up light functionality.

Dedicated 20 AMP Breaker in Electrical Service Panel Box (each)

If you are also purchasing a breaker panel box or electrical package with a panel box,  and you want a breaker in the panel box dedicated to one electrical outlet, add this option and specify in your checkout notes what you want on the dedicated service breaker. Does NOT include any outlet which must be purchased separately if desired.

Dual LED 12V Tail Lights (pair)

Add on any model to have a double set of tail lights.

Exterior 12V LED Light w/Switch (porch light by side door)

Add to any trailer. Normally mounted outside by side door.

Exterior 12V LED Rear Load Light (each)

Price per each light. Most buyers want at least two.

Motor Base 15 AMP 3-Prong 110V Exterior Plug w/One Inside Wall Receptacle

This is a standard 3-prong motor base plug on the outside of your trailer, used to connect your standard extension cord (cord not included) from a 110V power source.  (generator, power supply at a campground,  from your truck inverter if equipped, etc). Feeds 110V power to the inside wall outlet to give you 110V electric power in the outlet.

Side 12V Blinker Lights (also called mid-ship turn lights)

Add on any bumper pull or gooseneck model shorter than 32'. These come standard on any Freedom trailer 34' and longer.'

Stereo EXTRA Speaker Only (add-on with stereo purchase) Each

When purchasing the stereo, you can add as many extra speakers as you like, for inside or outside installation.

Stereo w/Bluetooth (Includes Holder/Mount & Two Speakers)

Completely installed. Extra speakers available and ordered separately as add-ons. Speakers can be placed inside or outside, your choice.

Upgrade Electrical Wiring to Heavier 12/2 Wire (required on heavy concession options models)

The factory may require you to purchase this upgrade if your amount of electrical service components need the heavier wire. Upgrades from standard size wiring to heavier 12/2 wiring on entire electrical install.

UPGRADE the Standard 12V Inside Dome Light to 12V LED 48” Strip Light

All models come with one 12V inside dome light. Choose this option if you want to upgrade from the free dome light to a 48” LED strip light.

Aluminum BLACK Tread Plate (ATP) 24” Tall Aluminum Sides & Rear ($20 PLF)

Adds 24” tall BLACK aluminum tread plate (ATP), around the sides and rear. Price calculated per linear foot x length of any width model.

Aluminum Colored Metal 24” Tall Sides & Rear ($18 PLF)

24” tall aluminum colored metal around the sides and rear. Request color choice to check availability. Price calculated per linear foot x length of any width model.

Aluminum Tread Plate (ATP) 24” Tall Aluminum Sides & Rear ($16 PLF)

Adds 24” tall aluminum tread plate (ATP) same as the front rock guard, around the sides and rear. Price calculated per linear foot x length of any width model.

Aluminum Treadplate (ATP) Front Corners-Any Size

Add on any width model.

Anodized (smooth) 24” Tall Aluminum Sides & Rear ($15 PLF)

Adds 24” tall smooth anodized aluminum around the sides and rear. Price calculated per linear foot x length of any width model.

BLACK Fenders-UPGRADE on Any Size Trailer-ILO Standard Aluminum Fenders (pair)

If you want black fenders instead of the standard aluminum finish fenders on any size trailer, add this option to upgrade both fenders.

Black Steel Modular Wheels (UPGRADE) ILO Standard Silver Modular Wheels ($10 per each wheel)

Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

Blackout Exterior Trim w/Any Exterior Color Choice ($18 PLF) (Fenders/wheels blackout sold separately)

This will change ONLY the following trim to black: All bottom and top trim, side door trim and the bar lock and hasp, front ATP stone guard and vertical nose plate, black stepwell on 8.5 wide models. DOES NOT CHANGE FENDERS (standard aluminum) OR WHEELS TO BLACK (from standard silver mod wheel). MUST  PURCASE black fenders and/or black steel modular wheels options separately if desired. If ordering concession door, must add black trim on concession door separately if desired.

Brite Dip Aluminum Front Header Cap w/Cast Corners (7'or 8.5' Wide Models-Flat Front Only)

Only available on 7' wide and 8.5 wide models with the flat front.

Rear Top Spoiler w/ Two 12V Flood Lights

Adds extended wing on top rear of any width model. Includes lights with switch.

Rounded Frame for Rounded Front Corners on Any Model

Changes the square front corners to rounded.

Screwless Metal Exterior ($20 PLF) (Not Warranted)

Metal is screwed along bottom but not screwed on sides, is adhered to all wall posts by hi-tech adhesive. Can be selected for use on any standard .030 metal or upgraded .080 PolyMetal. Price is calculated per linear foot x length of any width model. Factory will not warrant it against detaching.

Semi-Screwless Metal Exterior ($15 PLF)

Metal is screwed at bottom and joints only (4' intervals) and corners, etc; and adhered to all other wall posts by hi-tech adhesive. Can be selected for use on any standard .030 metal or on the .080 PolyMetal. Price is calculated per linear foot x length of any width model.

Upgrade Any Width Trailer to .040 Aluminum Exterior ($22 PLF) *Hot Pink or Purple ONLY

IF YOU ARE ADDING THIS UPGRADE-SELECT THE FREE WHITE WHEN ADDING TRAILER TO CART, THEN SPECIFY IN CHECKOUT NOTES WHICH .040 METAL COLOR YOU CHOOSE.  Add this item to your cart and then SPECIFY your color choice (Hot Pink or Purple ONLY) at checkout in the ”checkout notes” section. Price is calculated at per linear foot x trailer length on any width model.

Upgrade Any Width Trailer to .080 Poly-Backed Aluminum ($25 PLF) Limited Colors Available (see list in details)

IF YOU ARE ADDING THIS UPGRADE-SELECT THE FREE WHITE WHEN ADDING TRAILER TO CART, THEN SPECIFY IN CHECKOUT NOTES WHICH CORE METAL COLOR YOU CHOOSE. This product used extensively in the sign industry. It's aluminum metal adhered on a hard poly core backing with a total thickness of .080 and gives the smoothest exterior looking finish. Available only in the following color choices:  WHITE, BLACK, RED, SILVER FROST, CHARCOAL GRAY, BRANDYWINE, BRITE BLUE, BRITE GREEN, INDIGO BLUE, ORANGE, YELLOW. Add this item to your cart and then SPECIFY your color choice at checkout in the ”checkout notes” section. Price is calculated at per linear foot x trailer length on any width model.

”Sprint Car” Hauler 10' Inside Rear Section Height w/9'6” Door Header Height (max available) 8.5 Wide Model Only ($90 PLF)

(photo is an example for illustration purposes only) THIS OPTION ALSO REQUIRES ADDING DOUBLE SPRING ASSIST ON THE STANDARD HD RAMP DOOR or Upgrading to the SUPER DUTY RAMP DOOR that includes double spring assist. Optional electric winch for any ramp door also available. This adds the max height extra height of 39” only to rear section (you choose length of rear section up to 12') and you choose the lower inside height of the remaining front section. Price for sprint car height option (w/taller rear section) is calculated per linear foot x length of trailer on 8.5 models only.

06” Additional Height on Any Width Model ($15 PLF)

This option adds 6” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

12” Additional Height on Any Width Model ($25 PLF)

This option adds 12” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

18” Additional Height on Any Width Model ($38 PLF)

This option adds 18” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

24” Additional Height on Any Width Model ($48 PLF)

ALSO REQUIRES ADDING DOUBLE SPRING ASSIST ON RAMP DOOR IF YOU WANT REAR DOOR HEIGHT TALLER THAN 7'6”. IF NO DOUBLE ASSIST ADDED DOOR HEIGHT WILL MAX AT 7'6” REGARDLESS OF INSIDE HEIGHT. This option adds 24” to the standard overall & inside  heights & door header height if you also purchase the double spring assist on ramp door separately. Price for extra height is calculated per linear foot x length of trailer on any width model.

30” Additional Height on Any Width Model ($80 PLF)

ALSO REQUIRES ADDING DOUBLE SPRING ASSIST ON RAMP DOOR IF YOU WANT REAR DOOR HEIGHT TALLER THAN 7'6”. IF NO DOUBLE ASSIST ADDED DOOR HEIGHT WILL MAX AT 7'6” REGARDLESS OF INSIDE HEIGHT. This option adds 30” to the standard overall & inside heights & door header height to a max rear door height of 8'6”, if you also purchase the double spring assist on ramp door separately. Price for extra height is calculated per linear foot x length of trailer on any width model.

36” Additional Height on Any Width Model ($90 PLF)

ALSO REQUIRES ADDING DOUBLE SPRING ASSIST ON RAMP DOOR IF YOU WANT REAR DOOR HEIGHT TALLER THAN 7'6”. IF NO DOUBLE ASSIST ADDED DOOR HEIGHT WILL MAX AT 7'6” REGARDLESS OF INSIDE HEIGHT. This option adds 36” to the standard overall & inside heights & door header height to a max rear door height of 8'6”, if you also purchase the double spring assist on ramp door separately. Price for extra height is calculated per linear foot x length of trailer on any width model.

39” Additional Height (max available) on Any Width Model ($95 PLF)

ALSO REQUIRES ADDING DOUBLE SPRING ASSIST ON RAMP DOOR IF YOU WANT REAR DOOR HEIGHT TALLER THAN 7'6”. IF NO DOUBLE ASSIST ADDED DOOR HEIGHT WILL MAX AT 7'6” REGARDLESS OF INSIDE HEIGHT. This option adds 36” to the standard overall & inside heights & door header height to a max rear door height of 8'6”, if you also purchase the double spring assist on ramp door separately. Price for extra height is calculated per linear foot x length of trailer on any width model.

Double Spring Assist on Rear Ramp Door (recommended on any ramp door over 7'6” tall)

Highly recommended on any ramp door with extra height added on trailer. Standard on Super Duty Door upgrade. Adds a second spring and assists in raising or lowering rear ramp door. Note: The max height for any rear ramp door is 8'6” no matter how tall the trailer is inside.

REDUCE the Overall Height of Any Width Trailer ($15 PLF)

Choose this option if you want to REDUCE the standard height of any width trailer. Will reduce overall, inside and door header heights. Price is calculated per linear foot x length of any width model. Indicate either your desired INSIDE or OVERALL trailer height in the notes section on the checkout page. (allow for minor variance).

ATP 18” Wide Floor Runners-Pair ($24 PLF)

These 18” wide aluminum tread plate (ATP) runners are placed full length of trailer on top of floor, spaced where your car tires would roll over floor. Price is calculated per linear foot x length of trailer.

ATP 24” Wide Floor Runners-Pair ($30 PLF)

These 24” wide aluminum tread plate (ATP) runners are placed full length of trailer on top of floor, spaced where your car tires would roll over floor. Price is calculated per linear foot x length of trailer.

ATP Covered Wheel Well Ramp-Overs on 8.5 Wide Inside (15' Long x 18” Wide)

Add this to drive vehicle up over inside wheel well boxes.

ATP Covered Wheel Well Ramp-Overs on 8.5 Wide Inside (17' Long x 18” Wide)

Add this to drive vehicle up over inside wheel well boxes.

Floor Covered in Black & White Checkered Vinyl ($39 PLF)

Available on any width model. Price calculated per linear foot x length of any width trailer.

Floor Insulation (R8) ($29 PLF)

R8 Thermal-Wrap® Fiberglass insulation encased in a durable blanket material that is an effective thermal insulation solution. Insulation installed underneath the trailer floor with metal barrier to hold insulation sealed. Price calculated per linear foot x trailer length on any width model.

Floor UPGRADED to 1/8” Steel Plate ILO Standard Plywood ($130 PLF)

Upgrade from the standard 3/4” plywood floor to 1/8” all steel floor, no plywood. Price calculated per linear foot x length of any width model.

Floor UPGRADED to 3/4” Pressure Treated Plywood ILO Standard Plywood ($22 PLF)

Upgrade the standard 3/4” plywood floor to pressure treated 3/4” plywood. Price calculated per linear foot x length of any width model.

Floor UPGRADED to DOUBLE 3/4” (1-1/2” thickness) Plywood ($22 PLF)

Upgrade the standard 3/4” plywood floor to double layer of 3/4” plywood. Price calculated per linear foot x length of any width model.

Floor-Aluminum Tread Plate (ATP) HD Thicker .063 ($65 PLF)

Floor covered in heavy duty .063 thickness ATP.  Available on any width model. Price calculated per linear foot x length of any width trailer.

Floor-Aluminum Tread Plate (ATP) Over Floor Deck ($40 PLF)

Floor covered in ATP.  Available on any width model. Price calculated per linear foot x length of any width trailer.

Floor-Black Coin Design Rubber Over Floor Deck ($37 PLF)

Floor covered in black rubber coin design.  Considered to be softer to stand on than rubber treadplate. Available on any width model. Price calculated per linear foot x length of any width trailer.

Floor-Black Flake Smooth Design Rubber Over Floor Deck ($38 PLF)

Floor covered in black rubber flake smooth design.  Considered to be softer to stand on and less skid. Available on any width model. Price calculated per linear foot x length of any width trailer.

Floor-Black Indoor/Outdoor Carpet Over Floor Deck ($25 PLF)

Floor covered in black indoor/outdoor carpet.  Available on any width model. Price calculated per linear foot x length of any width trailer.

Floor-Black Rubber Tread Plate Over Floor Deck ($36 PLF)

Floor covered in black rubber tread plate.  Available on any width model. Price calculated per linear foot x length of any width trailer.

Floor-Deck UPGRADED to All Aluminum Metal Slats ($230 PLF)

Choose this option to upgrade the entire floor deck, on any width model, from standard 3/4” plywood to all aluminum slat flooring. No wood on floor deck. This is the highest quality decking offered by Freedom.

Ramp Door & Flap Covered in ATP-Any Size Ramp Door

Covers any ramp door and the flap end in aluminum tread plate.

Ramp Door & Flap Covered in Black Rubber Tread Plate-Any Size Ramp Door

Covers any ramp door and the flap end in black rubber tread plate.

Wheel Well Interior Boxes Covered in Aluminum Tread Plate (8.5 Wide Models)

The steel wheel well boxes covered in ATP on any 8.5 wide model. Note: If ordering metal walls and ceiling combination this option is included.

Winch Box (steel box w/slanted front-plywood cover) Recessed in Floor in Frame (purchase winch separately)

This adds a steel winch box recessed and welded in frame, with slanted box, (must add roller for cable separately if desired) with plywood lid, for your after-market winch install or you can add a 5k winch with battery separately. Normally placed centered in front but can be placed at your desired floor location (except over axle area).

Winch Cable Roller ONLY (added in steel recessed box) (must purchase winch box and winch separately)

This only adds a cable roller into a separately purchased recessed steel winch box, if you desire a roller for your winch cable to run over.

Winch Plate in Frame-Under Floor Deck

This adds a steel winch plate welded in frame under plywood floor in front center of trailer for your after-market winch install.

Ceiling Liner-(ATP) Aluminum Tread Plate ($52 PLF)

Aluminum tread plate finished ceiling. Price calculated per linear foot x length of any width model.

Ceiling Liner-Black Metal ($42 PLF)

Black metal finished ceiling. Price calculated per linear foot x length of any width model.

Ceiling Liner-Raw Luan Plywood ($26 PLF)

Raw Luan (thin plywood) finished ceiling. Price calculated per linear foot x length of any width model.

Ceiling Liner-White or Colored Metal ($40 PLF)

White or colored (standard) metal finished ceiling. Price calculated per linear foot x length of any width model.

Ceiling Only in .080 Poly-backed Metal ($50 PLF)

.080 Poly-backed metal finished ceiling. Price calculated per linear foot x length of any width model.

Floor Insulation (R8) ($29 PLF)

R8 Thermal-Wrap® Fiberglass insulation encased in a durable blanket material that is an effective thermal insulation solution. Insulation installed underneath the trailer floor with metal barrier to hold insulation sealed. Price calculated per linear foot x trailer length on any width model.

Insulation in Ceiling Only (R8) Any Width Model ($15 PLF) *Requires a ceiling liner purchase of your choice

R8 Thermal-Wrap® Fiberglass insulation encased in a durable blanket material that is a simple, fast, and effective thermal insulation solution.*Requires separate purchase of a ceiling liner of your choice to hold up insulation. (Note: Luan ceiling liner comes standard on all gooseneck models). Price calculated per linear foot x length of any width model.

Insulation in Walls (R9) & Ceiling (R8) Combo-Any Width Model ($30 PLF) *Requires a Ceiling Liner Purchase

Thermal-Wrap® Fiberglass insulation encased in a durable blanket material that is an effective thermal insulation solution.*EXCEPT on a gooseneck model where a Luan ceiling liner comes standard, all bumper pull models you must also purchase a ceiling liner of your choice to cover ceiling insulation.  Price calculated at per linear foot x length of trailer.

Insulation in Walls Only (R9)-Any Width Model ($17 PLF)

R9 Thermal-Wrap® Fiberglass insulation encased in a durable blanket material that is an effective thermal insulation solution.  Price calculated at per linear foot x length of trailer.

Kick-Plate 12” High 3/4” Plywood-Any Width Model ($10 PLF)

12” high 3/4” plywood kick plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

Kick-Plate 12” High Aluminum Tread Plate (ATP)-Any Width Model ($15 PLF)

12” high aluminum tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

Kick-Plate 12” High Black Rubber Tread Plate-Any Width Model ($17 PLF)

12” high black rubber tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

Kick-Plate 24” High 3/4” Plywood-Any Width Model ($18 PLF)

24” high 3/4” plywood kick plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

Kick-Plate 24” High Black Rubber Tread Plate-Any Width Model ($30 PLF)

24” high black rubber tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

Metal Covered (Colored) Walls & Ceiling Combo-Any Width Model ($99 PLF)

Available in any standard outside color on any width model. Specify your color choice in your checkout notes. Price calculated at per linear foot x length of trailer.

Metal Covered (Stainless Steel) Walls & Ceiling Combo-Any Width Model ($350 PLF)

Stainless steel covered walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

Metal Covered (White or Mill Finish) Walls & Ceiling Combo-Any Width Model ($95 PLF)

Add white metal or mill finish (silver) walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

Partition Divider Wall Running Length Wise Inside Trailer ($99 per foot)

Plywood partition wall/divider running length wise inside trailer at your desired location. Sold by the foot x how long you want the wall. Any width and height model. You must provide exact desired location. Add to cart and then change quantity in cart to desired length. Minimum 4'

Partition Wall-Any Width & Height Trailer (No Door)

This will add a plywood covered wall with no door across the width of any trailer at your location choice.

Partition Wall-Any Width & Height Trailer (With 32” Pocket Slider Door)

This will add a plywood covered wall with a 32” wide pocket slider door door across the width of any trailer at your location choice.

Partition Wall-Any Width & Height Trailer (With 32” Walk-Thru Swing Door)

This will add a plywood covered wall with a 32” wide walk through door across the width of any trailer at your location choice.

Partition Wall-Any Width & Height Trailer (With 36” Pocket Slider Door) *Largest Pocket Door Available

This will add a plywood covered wall with a 36” wide pocket slider door door across the width of any trailer at your location choice.

Partition Wall-Any Width & Height Trailer (With 36” Walk-Thru Swing Door)

This will add a plywood covered wall with a 36” wide walk through door across the width of any trailer at your location choice.

Partition Wall-Any Width & Height Trailer (With 48” Walk-Thru Swing Door)

This will add a plywood covered wall with a 48” wide walk through door across the width of any trailer at your location choice.

Walls & Ceiling Combo in .080 Poly-Backed Metal-Any Width Model ($95 PLF)

Walls and ceiling covered in .080 Poly backed metal. Price calculated at per linear foot x length of trailer.

Walls Completely Covered (Floor to Ceiling) in Black Carpet-Any Width Model ($60 PLF)

Fully covered black carpet on all side walls, floor to ceiling. Price calculated per linear foot x length of any width model.

Walls Covered 36” High in Black Carpet-Any Width Model ($28 PLF)

36” high black carpet on side walls. Price calculated per linear foot x length of any width model.

Walls Covered in Aluminum Tread Plate (ATP)-Any Width Model ($98 PLF)

Finished walls covered in ATP. Price calculated per linear foot x length of any width model.

Walls Covered in Mill Finish Aluminum Metal-Any Width Model ($50 PLF)

Finished walls covered with the mill unfinished side of aluminum metal. Price calculated per linear foot x length of any width model.

Walls Covered in White or Colored Aluminum Metal-Any Width Model ($65 PLF)

Finished walls covered in colored, white or other standard available color aluminum metal. Price calculated per linear foot x length of any width model.

Walls Only in .080 Poly-backed Metal-Any Width Model ($55 PLF)

Finished walls covered in colored .080 Poly-backed metal. Price calculated per linear foot x length of any width model.

Walls UPGRADED to 3/4” Plywood ILO Standard 3/8” Plywood ($20 PLF)

Upgrade the standard 3/8” plywood walls to 3/4” plywood. Price calculated per linear foot x length of any width model.

Walls UPGRADED to 3/8” Pressure Treated Plywood ILO Standard Plywood ($40 PLF)

Upgrade the standard 3/8” plywood walls to pressure treated 3/8” plywood. Price calculated per linear foot x length of any width model.

Dish Wash 3-Sinks w/Hand Wash Sink in Base Cabinet w/Water Service Package (Requires Min 7' Wide Tandem Axle Model)

Includes: 3-sink dish wash sinks, single hand wash sink all in a base cabinet, large 30 gal fresh water holding tank, 40 gal waste water holding tank,  with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump.  (NOTE: Power source is not included. Must purchase 12V battery power or 110V electrical power service separately if desired). Normally installed across flat front wall on 8.5' wide models.

Hot Plate, Mini-Fridge, Microwave, Small Sink in Cabinet (No Water Supply)

Package includes: 110V hot plate, mini-fridge & microwave, a 24” wide base cabinet with a small hand sink. Can be tied into a bathroom purchase with water service. OTHERWISE, YOU MUST ADD YOUR OWN AFTER-MARKET WATER SUPPLY. THIS OPTION DOES NOT INCLUDE WATER SERVICE.

Hot Plate, Mini-Fridge, Microwave, Small Sink in Cabinet w/Water Supply (no water heater) Requires Minimum 6' Wide Tandem Axle Model

Great for camping. Package includes: 110V hot plate, mini-fridge & microwave in a 24” wide base cabinet, with a small hand sink. Water tanks for fresh water and waste water, your choice 12V or 110V water pump. Must add 12V and/or 110V power service separately if desired.

Kitchen Sink (18”x18”x12”) in 2' Base Cabinet w/Full Water Service (must order additional minimum of 4' base cabinet for water tank/heater)

REQUIRES AT LEAST 4' ADDITIONAL BASE CABINET PURCHASE FOR WATER TANK, HEATER, PUMP. This option is one kitchen sink measuring 18”x18”x12” in a 2' base cabinet. Includes: Sink, 2' base cabinet, holding tanks with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump.  (NOTE: Power source is not included. Must purchase 12V battery power or 110V electrical power service separately if desired).

Kitchen Sink in Full Base Cabinet-NO Water Service

This is one kitchen hand sink in a base cabinet. Includes: Sink in a base cabinet only. Choose this if you will be adding plumbing after-market, or choose this if you are also purchasing a bathroom full water service package and this sink can be tied to that same plumbing service.

Sink Splash Guard

Add a splash guard on any sink purchased.

Tankless On-Demand Water Heater UPGRADE

This will upgrade from a standard 2.5 gal 110V water heater to an on-demand tankless 110V water heater. Must purchase electrical service separately if desired.

Water Heater UPGRADE From Standard 2.5 Gal to 12 Gal

If you are purchasing any water package separately that includes the 2.5 gal water heater, and want to upgrade to a larger capacity hot water heater, this will upgrade from the standard 2.5 gal to 12 gal capacity 110V water heater. Note: Electrical must be purchased separately if desired.

Water Holding Tanks ONLY-Installed & Stubbed Out (Minimum 6' Wide Tandem Axle Model)

If you want the fresh water and gray water holding tanks installed in a trailer you are ordering, this option is only for the tanks installed and they will only be stubbed out for your after-market plumbing completion.

10' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

11' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

12' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

12' Long x 36” Wide Vented Range Hood w/TWO (2) Exhaust Fans

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

13' Long x 36” Wide Vented Range Hood w/TWO (2) Exhaust Fans

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

4' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

4' Long x 42” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

5' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

6' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

7' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

8' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

9' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

Propane Tank Cage Only-Steel 19”x19”-Holds 100# Tank (each)

Can be mounted on rear (with no door or only a walk-thru door) or on front tongue. If tongue mounted as in picture, requires extended tongue purchased separately. Propane tank cage only. Holds one standard 100# propane tank. Price per each storage cage. (tank not for sale)

BLACK Fenders-UPGRADE on Any Size Trailer-ILO Standard Aluminum Fenders (pair)

If you want black fenders instead of the standard aluminum finish fenders on any size trailer, add this option to upgrade both fenders.

Black Steel Modular Wheels (UPGRADE) ILO Standard Silver Modular Wheels ($10 per each wheel)

Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

Blackout Exterior Trim w/Any Exterior Color Choice ($18 PLF) (Fenders/wheels blackout sold separately)

This will change ONLY the following trim to black: All bottom and top trim, side door trim and the bar lock and hasp, front ATP stone guard and vertical nose plate, black stepwell on 8.5 wide models. DOES NOT CHANGE FENDERS (standard aluminum) OR WHEELS TO BLACK (from standard silver mod wheel). MUST  PURCASE black fenders and/or black steel modular wheels options separately if desired. If ordering concession door, must add black trim on concession door separately if desired.

Blackout UPGRADE on 12” or 24” Tall Anodized (or ATP) If Ordering Motorcycle Decor Package ($16 PLF)

If ordering a motorcycle decor package that includes 12” or 24” anodized (smooth) or the ATP upgrade around trailer bottom, and you want it blacked out, add this option. Price calculated at times per linear foot of trailer length.

Motorcycle Hauler 12” Tall Decor Package w/Mags-6' or 7' Wide Single Axle Models

Add on any single axle 6' or 7' wide model any length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

Motorcycle Hauler 12” Tall Decor Package w/Mags-6' or 7' Wide Tandem Axle Models

Add on any tandem axle 6' or 7' wide model any length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

Motorcycle Hauler 12” Tall Decor Package w/Mags-8.5 Wide Tandem Axle Models (Only up to 24')

Add on any tandem axle 8.5 wide model up to 24' in length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

Motorcycle Hauler 24” Tall Decor Package w/Mags-6' or 7' Wide Single Axle Models

Add on any single axle 6' or 7' wide model any length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

Motorcycle Hauler 24” Tall Decor Package w/Mags-6' or 7' Wide Tandem Axle Models

Add on any tandem axle 6' or 7' wide model any length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

Motorcycle Hauler 24” Tall Decor Package w/Mags-8.5 Wide Tandem Axle Models (Only up to 24')

Add on any tandem axle 8.5 wide model up to 24' in length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

Motorcycle Hauler Decor Package UPGRADE to ATP ILO Anodized (Smooth) Sides, Rear, Corners

This upgrades any motorcycle hauler decor package you choose, on any size trailer, from the standard anodized aluminum decor included in the package to aluminum tread plate (ATP).

Race Ready Complete Package-Any 8.5 Wide Model (For 18' to 24' Long)

Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

Race Ready Complete Package-Any 8.5 Wide Model (For 26' to 30' Long)

Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

Race Ready Complete Package-Any 8.5 Wide Model (For 32' to 36' Long)

Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

Race Ready Package-Upgrade Any Race Ready Complete Package from 30 AMP to 50 AMP Electric Service

If you are ordering a RACE READY PACKAGE with the standard 30 AMP electrical service included, and you desire a 50 AMP panel electric service ILO of the 30 AMP service included in the package, add this option.

Stereo EXTRA Speaker Only (add-on with stereo purchase) Each

When purchasing the stereo, you can add as many extra speakers as you like, for inside or outside installation.

Stereo w/Bluetooth (Includes Holder/Mount & Two Speakers)

Completely installed. Extra speakers available and ordered separately as add-ons. Speakers can be placed inside or outside, your choice.

8' x 10' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

8' x 12' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

8' x 8' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

Brite Dip Aluminum Front Header Cap w/Cast Corners (7'or 8.5' Wide Models-Flat Front Only)

Only available on 7' wide and 8.5 wide models with the flat front.

Ladder Rack Arms (Cut-Down Low Profile) Aluminum (each) Min 2 Required

Roof ladder rack arms ”cut down” low as possible to the roof top for lower height cross arms above trailer top. Mounted to top side with braces and cross arms. Requires minimum of two (2) arms. Max capacity of each arm approximately 200 lbs. Recommend one every 4-6 feet between arm spacing, depending on your load.

Ladder Rack Arms-Aluminum (each) Min 2 Required

Roof ladder rack arms mounted to top side with braces and cross arms. Requires minimum of two (2) arms. Max capacity of each arm approximately 200 lbs. Recommend one arm every 4-6 feet between arm spacing, depending on your load.

One-Piece Rubber Roof (RV Style) UPGRADE on 6' or 7' Wide Models-7/16” OSB Underlayment ($20 PLF)

6' and 7' wide models come standard with a galvalume (galvanized aluminum) metal seamed roof. If you want a one-piece rubberized roof top as on campers, supported by 7/16” OSB underlayment, add this option. (Rubber roof is included as standard on all 8.5 wide models). Price calculated per linear foot x trailer length.

Roof Access Ladder (Stationary)

Normally mounted on front of trailer, can go on side of any 6' or 7' wide model, not on 8.5 wide model.

Roof Side Access Ladder (Removable )

Can go on the side of any width model at your desired location.

Walk-on Roof Full Length on Any Width Model ($20 PLF)

Includes 3/4” OSB under liner installed under full length of trailer roof with 12” on center roof cross bow members. Price is calculated per linear foot x length of any width model.

Bed-Full Size w/Mattress

Bed-Queen Size Fold-up w/Mattress

Bed-Single Fold-down w/Mattress

Bunk Bed & Rails w/Mattresses

Sofa & Single Bed Combo

12V Powered 5k Capacity Electric Winch Only-No Battery Included

Add on with a winch plate purchase or a recessed winch box purchase, if desired. This option is for winch only.

12V Powered 5k Capacity Electric Winch w/12V Deep Cycle Battery

Add on with a winch plate purchase or a recessed winch box purchase, if desired. Includes 12V battery and remote control to winch.

3000# Electric Tongue Jack w/Battery-Upgrade from Standard 2000# Manual Jack

This upgrades from a standard manual wind jack to 12V electric 3000# capacity tongue jack and includes the 12V battery.

5000# Electric Tongue Jack w/Battery-Upgrade from Standard 2000# Manual Jack

This upgrades from a standard manual wind jack to 12V electric 5000# capacity tongue jack and includes the 12V battery.

5000# Tongue Jack Upgrade (From Standard 2000#)

This will upgrade from a standard 2000# tongue jack to 5000#.

7000# Drop Leg Tongue Jack-Upgrade From Standard 2000# Jack

This upgrades from the standard 2000# tongue jack

8000# Drop Leg Tongue Jack-Upgrade From Standard 2000# Jack

This upgrades from the standard 2000# tongue jack

Bogey Roller Wheels Under Rear of Trailer Frame (Pair)

Add to any model. Steel roller bogey wheels welded underneath rear frame to lift trailer up if pulling over steep terrain.

Caster (Dolly) Wheel on Tongue Jack

Can be added to most tongue jacks, but not the drop leg HD jacks.

D-Ring Floor Flush Mounted Tie-Downs w/Steel Backer Plate In Frame (each)

Can be placed at your location choice. Add as many to cart as you desire. Price per each.

D-Ring Ties-Wall Mounted (each)

Normally installed 36” above floor level but can be placed at your location choice. Add as many to cart as you desire. Price per each.

E-Track (Steel) Flush Mounted (HORIZONTALLY) In Wall ($18 per foot)

Steel flush mounted horizontal wall E-track. Must purchase by row  x full length of your trailer. Example: 20' trailer with one row of wall E-track on each side will require 37' total of wall E-track. Driver side = 20', curbside = 17' (deducting 3' for side door). Add to cart and then update quantity in cart to desired number of feet.

E-Track (Steel) Flush Mounted (VERTICALLY) In Wall ($25 per foot)

VERTICALLY MOUNTED IN WALL Steel flush mounted wall E-track.  Must calculate total feet to purchase, determined by inside height of trailer and how many vertical tracks you desire on each side wall, from floor to ceiling. Add to cart and then update quantity in cart to desired number of feet. We will want you to furnish a hand drawing showing desired placement of tracks.

E-Track (Steel) Flush Mounted in Floor (price per foot)

Steel flush mounted floor E-track. Must purchase by row  x full length of your trailer. Example: 20' trailer with two rows of floor  E-track  will require 40' total of floor E-track. Add to cart and then update quantity in cart to desired number of feet.

Fold-down Rear Stabilizer Jacks (pair)

Add under rear corners on any model. 1000# capacity

Scissor Jacks (5000#) w/Handle-One Pair

Add a pair of 5000# scissor stabilizer jacks to any model. (Mounted on rear corners but can also be added to front corners if specified).

Side Wind Jack Handle Instead of Standard Top Wind Handle

All models come standard with a top wind tongue jack. This changes to a side wind jack handle.

Side-Wind Square HD 5000# Tongue Jack Upgrade-From Standard 2000# Top Wind Jack

Upgrades to the square sidewinder HD jack from standard top wind 2000# jack.

Steel Skid Plates Under Rear Corners (pair)

Add on any trailer under framework to help protect rear of trailer if drags over terrain.

Swing-Up Swivel Tongue Jack Upgrade (Only available in 2000#)

Upgrades the standard 2000# tongue jack to a swivel-up tongue jack.

Winch Box (steel box w/slanted front-plywood cover) Recessed in Floor in Frame (purchase winch separately)

This adds a steel winch box recessed and welded in frame, with slanted box, (must add roller for cable separately if desired) with plywood lid, for your after-market winch install or you can add a 5k winch with battery separately. Normally placed centered in front but can be placed at your desired floor location (except over axle area).

Winch Cable Roller ONLY (added in steel recessed box) (must purchase winch box and winch separately)

This only adds a cable roller into a separately purchased recessed steel winch box, if you desire a roller for your winch cable to run over.

Winch Plate in Frame-Under Floor Deck

This adds a steel winch plate welded in frame under plywood floor in front center of trailer for your after-market winch install.

10' Wide Fold-Down OPEN STAGE w/Jack Legs (8.5 Wide Models Only) *minimum 7' inside height required

Note: Trailer must be a model with minimum 7' inside trailer height, and trailer length must be at least 4' longer than the stage you are ordering. Stage will extend out the distance based on the trailer side height. Price includes: 10' wide stage covered in 3/4” plywood only  (ATP or black rubber covering is optional charge if desired), HD jack/legs to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box. MUST ADD RAILING AND STEPS SEPARATELY IF DESIRED

14' Wide Fold-Down OPEN STAGE w/Jack Legs (8.5 Wide Models Only) *minimum 7' inside height required

Note: Trailer must be a model with minimum 7' inside trailer height, and trailer length must be at least 4' longer than the stage you are ordering. Stage will extend out the distance based on the trailer side height. Price includes: 14' wide stage covered in 3/4” plywood only  (ATP or black rubber covering is optional charge if desired), HD jack/legs to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box. MUST ADD RAILING AND STEPS SEPARATELY IF DESIRED

18' Wide Fold-Down OPEN STAGE w/Jack Legs (8.5 Wide Models Only) *minimum 7' inside height required

Note: Trailer must be a model with minimum 7' inside trailer height, and trailer length must be at least 4' longer than the stage you are ordering. Stage will extend out the distance based on the trailer side height. Price includes: 18' wide stage covered in 3/4” plywood only  (ATP or black rubber covering is optional charge if desired), HD jack/legs to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box. MUST ADD RAILING AND STEPS SEPARATELY IF DESIRED

20' Wide Fold-Down OPEN STAGE w/Jack Legs (8.5 Wide Models Only) *minimum 7' inside height required

Note: Trailer must be a model with minimum 7' inside trailer height, and trailer length must be at least 4' longer than the stage you are ordering. Stage will extend out the distance based on the trailer side height. Price includes: 20' wide stage covered in 3/4” plywood only  (ATP or black rubber covering is optional charge if desired), HD jack/legs to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box. MUST ADD RAILING AND STEPS SEPARATELY IF DESIRED

24' Wide Fold-Down OPEN STAGE w/Jack Legs (8.5 Wide Models Only) *minimum 7' inside height required

Note: Trailer must be a model with minimum 7' inside trailer height, and trailer length must be at least 4' longer than the stage you are ordering. Stage will extend out the distance based on the trailer side height. Price includes: 24' wide stage covered in 3/4” plywood only  (ATP or black rubber covering is optional charge if desired), HD jack/legs to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box. MUST ADD RAILING AND STEPS SEPARATELY IF DESIRED

36” Tall Rails Added On Stage w/Steps

Add this to any size stage you select to add rails and access steps.

Stage Floor Deck-Covered in ATP or Black Rubber-$40 Per Foot of Stage Width

NOTE: Stage comes with uncovered, 3/4” plywood deck floor standard. If ordering a stage, and you are NOT also ordering covered interior walls on your entire trailer (stage would be covered in the wall covering), if you want the stage deck floor to be covered in aluminum treadplate (ATP) or in black rubber, add this option and change quantity in your cart to the width stage you are ordering. Price is per foot x the width of the stage you order.

Stage-Electric Hydraulic Lift System-Upgrade

If ordering a stage on any trailer model, you can add this option to upgrade to an electric hydraulic lift system from the standard winch w/cable included with the stage. Complete system includes twin cylinders, 12v deep cycle marine battery in box.

Steps Only (No Rails) Outside Access To Stage (Aluminum)

Add this to any size stage you select for a set of aluminum stage access steps only.

12” On Center Floor Cross Members-Upgrade on Any Width Model ($10 PLF)

Choose this to upgrade any width model to 12” on center floor cross members. Price calculated per linear foot x length of any width model.

12” On Center Roof Cross Members-Upgrade on Any Width Model ($14 PLF)

Choose this to upgrade to 12” on center roof bow cross members, any width. Price calculated per linear foot x length of trailer.

12” On Center Wall Posts-Upgrade on Any Width Model ($15 PLF)

Choose this to upgrade to 12” on center wall posts on any width model. Price calculated per linear foot x length of trailer.

6” I-Beam Main Frame Upgrade on Any Standard 3” or 4” Tube Frame Model

Upgrade any size standard with a 3” or 4” tube main frame to 6” I-Beam main frame.

6” Tongue Frame Upgraded to 8” Tongue Frame (must add separately if desired with 8” main frame upgrade)

Only if you are upgrading a 6” main frame model to 8” main frame in the structure upgrades, and also want the tongue frame upgraded to 8” then also add this option for a flat charge. Tongue frame is not upgraded with frame upgrade to 8” unless you add this option.

A/C Roof Brace Only (For Your After-Market Roof A/C Install)

Only adds a roof brace to hold your after-market A/C. Normally centered in roof.

A/C Roof Brace w/Wire Stub (For Your After-Market Roof A/C Install)

Adds a roof brace to hold A/C and a wire stub ran to your panel box if electrical service also purchased separately, or stub will be to front wall. Normally centered in roof.

Bogey Roller Wheels Under Rear of Trailer Frame (Pair)

Add to any model. Steel roller bogey wheels welded underneath rear frame to lift trailer up if pulling over steep terrain.

Extra Bracing Added for Rear Gussets-Any Trailer Size

Add this if you want extra bracing for rear of trailer gussets for extra rear frame strength.

Flat Front on All Width Bumper Pull Models-Changes Trailer From V-Nose to Flat Front

Choose this to change from the standard V-nose front to a flat front on any width bumper pull model. Note: Only 8.5 wide flat front will also have anodized front corners. Must add anodized front corners on any other width model, if desired.

Framed Opening Only-Welded in Trailer (For you after-market use)

Choose this if you need a framed opening of your specified size, welded into the wall framework of any trailer, at your specified location. (you must furnish a drawing with requested size and placement. The inside plywood will be cut out around frame, the outside metal will be over the frame for you to remove when ready to install your after market item.

Hitch 2” Receiver Welded Under Rear of Any Freedom Model

Can be welded under the rear of any model for your use in adding 2” slide-in (not included). For ball hitch, bike rake, carry platform, etc.

Ramps (pair) Over Inside Wheel Well Boxes-8.5 Wide Models (ATP Covered Steel) 15' Long x 18” Wide

NOTE: Wheel well inside boxes measure approximately 6' long for tandem axles, 9' long for triple axles. Box height ranges from 11” to 13” depending on wheel size. (15” wheels= 11”, 16” wheels=12”, 17.5” wheels=13”). Box width is about 8”. Inside dimension between well boxes is approximately 82”.

Ramps (pair) Over Inside Wheel Well Boxes-8.5 Wide Models (ATP Covered Steel) 16' Long x 24” Wide

NOTE: Wheel well inside boxes measure approximately 6' long for tandem axles, 9' long for triple axles. Box height ranges from 11” to 13” depending on wheel size. (15” wheels= 11”, 16” wheels=12”, 17.5” wheels=13”). Box width is about 8”. Inside dimension between well boxes is approximately 82”.

Ramps (pair) Over Inside Wheel Well Boxes-8.5 Wide Models (ATP Covered Steel) 17' Long x 18” Wide

NOTE: Wheel well inside boxes measure approximately 6' long for tandem axles, 9' long for triple axles. Box height ranges from 11” to 13” depending on wheel size. (15” wheels= 11”, 16” wheels=12”, 17.5” wheels=13”). Box width is about 8”. Inside dimension between well boxes is approximately 82”.

Ramps (pair) Over Inside Wheel Well Boxes-8.5 Wide Models (ATP Covered Steel) 18' Long x 18” Wide

NOTE: Wheel well inside boxes measure approximately 6' long for tandem axles, 9' long for triple axles. Box height ranges from 11” to 13” depending on wheel size. (15” wheels= 11”, 16” wheels=12”, 17.5” wheels=13”). Box width is about 8”. Inside dimension between well boxes is approximately 82”.

Ramps (pair) Over Inside Wheel Well Boxes-8.5 Wide Models (ATP Covered Steel) 18' Long x 24” Wide

NOTE: Wheel well inside boxes measure approximately 6' long for tandem axles, 9' long for triple axles. Box height ranges from 11” to 13” depending on wheel size. (15” wheels= 11”, 16” wheels=12”, 17.5” wheels=13”). Box width is about 8”. Inside dimension between well boxes is approximately 82”.

Recessed Battery Storage Compartment in Floor

Store a 12V battery in floor storage compartment. Battery must be purchased separately

Rounded (Soft) Front-Changes Trailer from the Standard V (Pointed) Nose

Choose this is you want to change any V-nose bumper pull model to the more rounded front in lieu of the standard pointed front V-nose. (Cannot be used with the slant top V-option).

Rounded Frame for Rounded Front Corners on Any Model

Changes the square front corners to rounded.

Slanted Top on V-Nose

Adds the slanted V-top on any width standard V-nose model. Cannot be used with the rounded soft nose option.

Steel Skid Plates Under Rear Corners (pair)

Add on any trailer under framework to help protect rear of trailer if drags over terrain.

Tapered Front Nose Riser on Any Gooseneck (changes from standard flat nose)

This option tapers the standard flat front on any gooseneck model to allow more clearance for turning and clearing truck cab. Reduces inside riser space.

Upgrade Any 8.5 Wide to EXTRA Long 4' V-Nose, 15” Extended Triple Tube Tongue w/Sidewind Jack Included

This adds about two feet to the standard V-nose length on any bumper pull model. Makes a very sharp pointed V nose. Also adds 15” tongue length and triple tube tongue. Also includes the required upgrade to side wind tongue jack.

Upgrade Any 8.5 Wide to Longer 3' V-Nose w/Sidewind Tongue Jack Included

This adds about a foot to the standard V-nose length on any bumper pull model, does not add tongue length. Also includes the required upgrade to side wind jack.

Upgrade From 8” I-Beam Main Frame to 10” I-Beam Main Frame (For 26' or Longer Goosenecks or Bumper Pulls) REQUIRED on ANY Model w/10k Axles Upgrade

Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are upgrading tandem or triple axles to 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering any 10k axle upgrade on any tandem or triple axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

Upgrade From a Standard 6” I-Beam Frame to 6” Tube Frame (Flat Charge Any Size)

If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 6” tubing frame. Price is a flat charge for any size.

Upgrade From a Standard 6” I-Beam Frame to 8” Tube Frame ($49 PLF)

If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 8” tubing frame. Price is calculated x per linear foot of trailer length.

Upgrade From a Standard 6” I-Beam Frame to DOUBLE 6” I-Beam Frame ($20 PLF)

If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to a DOUBLE 6”  I-Beam  frame. Price is calculated x per linear foot of trailer length.

Upgrade From a Standard 6” to 8” I-Beam Frame ($16 PLF)

If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 8”. Price is calculated x per linear foot of trailer length.

Upgrade From a Standard 8” I-Beam Frame to 8” Tube Frame ($29 PLF)

If you are ordering any model size that comes standard with a 8” I-Beam frame, choose this to upgrade the frame to 8” tubing frame. Price calculated x per linear foot of trailer length.

Upgrade From a Standard 8” I-Beam Frame to DOUBLE 8” I-Beam Frame ($30 PLF)

If you are ordering any model size that comes standard with a 8” I-Beam frame, choose this to upgrade the frame to a DOUBLE 8”  I-Beam  frame. Price is calculated x per linear foot of trailer length.

Upgrade to Deck-over Wheels-Any Freedom 8.5 Wide Bumper Pull Model From 26'-36' Long (raises box height over wheels)

This option is for 8.5 wide tandem or triple axle bumper pull models from 26' to 36' length. Note: No inside wheel well boxes, box is over top of wheels. Rear ramp door has sharper angle. Ramp door is only longer by the amount of any added extra height to overall trailer.

Upgrade to Deck-over Wheels-Any Freedom 8.5 Wide Bumper Pull Model Up to 24' Long (raises box height over wheels)

This option is for 8.5 wide tandem or triple axle bumper pull models up to 24' long. Note: No inside wheel well boxes, box is over top of wheels. Rear ramp door has sharper angle. Ramp door is only longer by the amount of any added extra height to overall trailer.

Upgrade to Deck-over Wheels-Any Freedom 8.5 Wide GOOSENECK Model From 26'-46' Long (raises box height over wheels)

This option is for 8.5 wide tandem or triple axle GOOSENECK models from 26' to 46' length with standard size 8” main frame. Note: No inside wheel well boxes, box is over top of wheels. Rear ramp door has sharper angle. Ramp door is only longer by the amount of any added extra height to overall trailer.

Upgrade to Deck-over Wheels-Any Freedom 8.5 Wide GOOSENECK Model From 48'-52' Long-or Any Length Upgraded to10” Mainframe (raises box height over wheels)

This option is for 8.5 wide tandem or triple axle GOOSENECK models from 48' to 52' length with standard size 10” main frame, or if you upgrade any length gooseneck to a 10” mainframe. Note: No inside wheel well boxes, box is over top of wheels. Rear ramp door has sharper angle. Ramp door is only longer by the amount of any added extra height to overall trailer.

V-Nose Front Riser on Any Gooseneck Model (Changes from Standard Flat Front Riser)

Available on any gooseneck model but reduces inside riser space.

15” Extra Length w/Triple Tube Added To Standard Tongue on SINGLE Axle Model

Adds 15” to overall tongue length and adds a center tube on tongue on any SINGLE axle model.

15” Extra Length w/Triple Tube Added To Standard Tongue on Tandem Axle Model

Adds 15” to overall tongue length and adds a center tube on tongue on any tandem axle model.

24” Extra Length w/Triple Tube Added To Standard Tongue On SINGLE Axle Model

Adds 24” extra length to overall tongue length and adds a center tube on any single axle model.

24” Extra Length w/Triple Tube Added To Standard Tongue On Tandem Axle Model

Adds 24” extra length to overall tongue length and adds a center tube on any tandem axle model.

5th Wheel/Kingpin Coupler Upgrade on Any Gooseneck Model

Choose this option to upgrade any gooseneck that is standard with a 2-5/16” ball coupler stem to a standard size 5th wheel/king pin connector and square stem.

6” Tongue Frame Upgraded to 8” Tongue Frame (must add separately if desired with 8” main frame upgrade)

Only if you are upgrading a 6” main frame model to 8” main frame in the structure upgrades, and also want the tongue frame upgraded to 8” then also add this option for a flat charge. Tongue frame is not upgraded with frame upgrade to 8” unless you add this option.

Adjustable Height 2-5/16” Ball Coupler-Upgrade from Standard Stationary Coupler

Choose this to upgrade any model to an adjustable height 2-5/16” ball coupler

Adjustable Height Pintle (Military) Coupler-Upgrade 8.5 Wide from Standard Stationary Coupler

Choose this to upgrade any 8.5 wide model to an adjustable height pintle ring (military type) coupler

ATP Cover Contoured to Fit A-Frame Tongue

Used on flat front models or V-nose models with longer extended tongue. Shaped to fit on top of the A-frame open tongue area.

ATP Covered Wood Platform On Tongue (For small generator)

Used on flat front models or V-nose models with longer extended tongue. Can only be built to fit available open tongue space.

Detachable Tongue w/5k Jack Upgrade & 5000# Pair of Scissor Jacks (Only Available on Flat Front Models)

You must also select the change to flat front option when ordering detachable tongue. Tongue is fully removable from the front frame of the trailer. Price includes the required 5000# scissor jacks under front corners to hold up the trailer with tongue removed.

Hitch 2” Receiver Welded Under Rear of Any Freedom Model

Can be welded under the rear of any model for your use in adding 2” slide-in (not included). For ball hitch, bike rake, carry platform, etc.

Steel Generator Platform On Tongue (For larger generator)

Used on flat front models. Can only be built to fit available open tongue space.

Tongue A-Frame Covered in ATP (Requires Flat Front and/or Extended Tongue)

Choose this to have the open A-frame tongue section on any bumper pull model covered in ATP. Normally used on a flat front model with or without extended tongue.

Tool Storage Box on Tongue (Flat Front or Extended Tongue w/V-Nose)

Add on any model. Requires a flat front or extended tongue on a V-nose model.

UPGRADE Any Gooseneck from Standard 2-5/16” to LARGER 3” HD Ball Coupler GN Stem (requires larger 3” ball)

If you have the HD largest 3” hitch ball on your gooseneck hitch, choosing this option will upgrade from the standard 2-5/16” ball gooseneck stem/coupler to the heavier duty, larger 3” ball gooseneck stem/coupler.  NOTE: The larger 3” ball gooseneck stem is not what is normally used on most gooseneck trailers, so be sure of what you are ordering.

UPGRADE Single Axle Model from Standard 2” Ball Coupler to Larger 2-5/16” Ball Coupler

Upgrades from standard stationary 2” ball coupler size to 2-5/16”

Weight Distribution Kit Installed on Bumper Pull Model

Choose this to have a weight distribution kit system pre-installed onto your trailer tongue.

A/C Mini Split- Protective Expanded Metal Cage for Any Size Exterior Unit

If you want a protective expanded metal cage over your exterior Mini Split unit, choose this option.

A/C Mini Split-Add 2nd Inside Blower Unit to 18k, 22k, or 24k Mini Split Unit

If you want to add a second inside wall blower unit on your purchase of an 18k, 22k or 24k mini split A/C system, choose this option. Gives you two inside wall blower units at your inside location choice (dual zone).

A/C Mini Split-Add 2nd Inside Blower Unit to the 30k Mini Split Unit

If you want to add a second inside wall blower unit on your purchase of a 30k mini split A/C system, choose this option. Gives you two inside wall blower units at your inside location choice (dual zone).

A/C Roof Brace Only (For Your After-Market Roof A/C Install)

Only adds a roof brace to hold your after-market A/C. Normally centered in roof.

A/C Roof Brace w/Wire Stub (For Your After-Market Roof A/C Install)

Adds a roof brace to hold A/C and a wire stub ran to your panel box if electrical service also purchased separately, or stub will be to front wall. Normally centered in roof.

A/C Unit (15k) w/Heat Strip-Roof Mounted (Includes required roof brace and wire stub)

Normally centered in roof. If no electrical package is also purchased, stub will be to front wall.

A/C w/HEAT-Pioneer Mini Split 09k BTU Heat Pump-Single Zone-Ductless

Pioneer WYT-19 Diamante Series Mini Split. DC Inverter + Heat Pump in One System. Includes the outside unit mounted on outside front of any flat front or V-nose trailer. (Purchase a protective wire cage separately around outside unit as shown, if desired) Includes single inside blower wall unit mounted in your inside location choice. (can purchase a 2nd inside blower wall unit separately, if desired). Has a 5 year limited warranty issued by the A/C manufacturer directly. NOTE: Requires electrical panel/package purchased separately in order to be operational, unless buyer chooses to install electrical service and connects to A/C after market.

A/C w/HEAT-Pioneer Mini Split 18k BTU Heat Pump-Single Zone-Ductless

Pioneer WYT-19 Diamante Series Mini Split. DC Inverter + Heat Pump in One System. Includes the outside unit mounted on outside front of any flat front or V-nose trailer. (Purchase a protective wire cage separately around outside unit as shown, if desired) Includes single inside blower wall unit mounted in your inside location choice. (can purchase a 2nd inside blower wall unit separately, if desired). Has a 5 year limited warranty issued by the A/C manufacturer directly. NOTE: Requires electrical panel/package purchased separately in order to be operational, unless buyer chooses to install electrical service and connects to A/C after market.

A/C w/HEAT-Pioneer Mini Split 22k BTU Heat Pump-Single Zone-Ductless

Pioneer WYT-19 Diamante Series Mini Split. DC Inverter + Heat Pump in One System. Includes the outside unit mounted on outside front of any flat front or V-nose trailer. (Purchase a protective wire cage separately around outside unit as shown, if desired) Includes single inside blower wall unit mounted in your inside location choice. (can purchase a 2nd inside blower wall unit separately, if desired). Has a 5 year limited warranty issued by the A/C manufacturer directly. NOTE: Requires electrical panel/package purchased separately in order to be operational, unless buyer chooses to install electrical service and connects to A/C after market.

A/C w/HEAT-Pioneer Mini Split 24k BTU Heat Pump-Single Zone-Ductless

Pioneer WYT-19 Diamante Series Mini Split. DC Inverter + Heat Pump in One System. Includes the outside unit mounted on outside front of any flat front or V-nose trailer. (Purchase a protective wire cage separately around outside unit as shown, if desired) Includes single inside blower wall unit mounted in your inside location choice. (can purchase a 2nd inside blower wall unit separately, if desired). Has a 5 year limited warranty issued by the A/C manufacturer directly. NOTE: Requires electrical panel/package purchased separately in order to be operational, unless buyer chooses to install electrical service and connects to A/C after market.

A/C w/HEAT-Pioneer Mini Split 30k BTU Heat Pump-Single Zone-Ductless

Pioneer WYT-19 Diamante Series Mini Split. DC Inverter + Heat Pump in One System. Includes the outside unit mounted on outside front of any flat front or V-nose trailer. (Purchase a protective wire cage separately around outside unit as shown, if desired) Includes single inside blower wall unit mounted in your inside location choice. (can purchase a 2nd inside blower wall unit separately, if desired). Has a 5 year limited warranty issued by the A/C manufacturer directly. NOTE: Requires electrical panel/package purchased separately in order to be operational, unless buyer chooses to install electrical service and connects to A/C after market.

A/C w/HEAT-Pioneer Mini Split 36k BTU Heat Pump-DUAL Zone-Ductless

Pioneer WYT-19 Diamante Series Mini Split. DC Inverter + Heat Pump in One System. Includes the outside unit mounted on outside front of any flat front or V-nose trailer. (Purchase a protective wire cage separately around outside unit as shown, if desired) Includes two (Dual) inside blower wall units mounted in your inside location choice. Has a 5 year limited warranty issued by the A/C manufacturer directly. NOTE: Requires electrical panel/package purchased separately in order to be operational, unless buyer chooses to install electrical service and connects to A/C after market.

A/C Wall Thermostat w/ Bluetooth For Roof Mount A/C (Requires A Thermostat per A/C Unit Purchased)

Add to use with separate roof mount A/C purchase.

Add 2-Way Aluminum or Black Side Air Vents (one pair)

All models come standard with one pair stationary side air vents. Choose this option to add a pair of 2-way aluminum or black side vents.

Add Extra Side Vents-Stationary Plastic (pair)

All models come standard with one pair stationary side air vents. Choose this option to add another pair.

Maxx-Air Roof Vent Cover Shell (each)

Add to cover any roof vent. Allows roof vent to remain open while driving or in rain.

Roof Vent on Goosenecks-UPGRADE From Manual to 12V Powered (each)

All goosenecks come standard with two manual roof vents. This option will UPGRADE from a manual vent to a 12V powered roof vent. To upgrade both vents on a gooseneck add 2 of this option in cart.  On board 12V power supply not included, must be purchased separately if desired.

Roof Vent-12V ”Fantastic” Full Auto Powered Exhaust Fan (each)

Add 12V Fantastic full auto powered roof vent with exhaust fan. Normally centered in trailer. Can be placed at your chosen roof location. On board 12V power supply not included, must be purchased separately if desired.

Roof Vent-ADDED-12V Powered (each)

Add 12V powered roof vent. Normally centered in trailer. Can be placed at your chosen roof location. On board 12V power supply not included, must be purchased separately if desired.

Roof Vent-ADDED-Manual Non-Powered (each)

Add manual roof vent. Normally centered in trailer. Can be placed at your chosen roof location. NOTE: Gooseneck models come standard with two manual roof vents.

Side Vents-Upgrade From Stationary Plastic Vents to Aluminum or Black Two Way-Open/Close-UPGRADE (pair)

Choose this to upgrade from the standard plastic stationary side vents to two-way aluminum side vents,

5-Lug Single Axle Model-Upgrade to Aluminum Mags (Fits 3500# Axle)

Upgrades both wheels on a single axle from standard 5-lug steel wheels (fits 3500/2990 axle) to aluminum mags.

5-Lug Tandem Axle Model-Upgrade to Aluminum Mags (Fits 3500# Axle)

Upgrades all 4 wheels from standard 5-lug steel wheels (fits 3500/2990 axle) to aluminum mags.

6-Lug Single Axle-Upgrade to Aluminum Mags (Fits 5200# Axle)

If you purchase the upgrade on a single axle model to 5200 lb 6-lug axle. This option upgrades both wheels from standard 6-lug steel wheels (fits 5200# axle) to aluminum mags.

6-Lug Tandem Axle-Upgrade to Aluminum Mags (Fits 5200# Axles)

Must first purchase axle upgrade on any trailer standard with 3500# axles. This option upgrades all 4 wheels on a tandem 5200#  axle model from 6-lug steel wheels (fits 5200# axle) to aluminum mags.

6-Lug Triple Axle-Upgrade to Aluminum Mags (Fits 5200# Axles)

This option upgrades all 6 wheels on a triple 5200# axle model from 6-lug steel wheels (fits 5200# axle) to aluminum mags.

8-Lug Tandem Axle-Upgrade to Aluminum Mags (Fits 7000# or 8000# Axles)

This option upgrades all 4 wheels on a tandem 7000# or 8000# axle model from 8-lug steel wheels to aluminum mags.

8-Lug Triple Axle-Upgrade to Aluminum Mags (Fits 7000# or 8000# Axles)

This option upgrades all 6 wheels on a triple 7000# or 8000# axle model from 8-lug steel wheels to aluminum mags.

Black Steel Modular Wheels (UPGRADE) ILO Standard Silver Modular Wheels ($10 per each wheel)

Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

Center Caps for Standard Steel Wheels (Set of 4) Fits Any Model w/Tandem 5-lug 3500# Axles

Add on any tandem axle with 5-lug standard steel wheels. Price is for set of 4.

Center Caps for Standard Steel Wheels (Set of 4) Fits Any Model w/Tandem 6-lug 5200# Axles

Add on any tandem axle with 6-lug standard steel wheels. Price is for set of 4.

Center Caps for Standard Steel Wheels (Set of 4) Fits Any Model w/Tandem 8-lug 7000# or 8000# Axles

Add on any tandem axle with 8-lug standard steel wheels. Price is for set of 4.

Recessed Spare Tire Storage Compartment in Floor (8.5 Wide Only)

Adds a recessed spare tire storage compartment in front trailer floor area on 8.5 wide model.

Spare 17.5” Wheel/Tire 14 Ply to Fit 8-Lug Axle (each)

Standard spare steel 17.5” wheel with standard 14 ply 8- lug  axle model.

Spare 17.5” Wheel/Tire 16 Ply to Fit 10,000# 8 Lug Axle (each)

Standard steel 17.5” wheel with upgraded 16 ply 8- lug spare to fit 10,000# axle model.

Spare Tire Mount Bracket on Inside of Trailer

Inside spare mount bracket for any size spare wheel. Normally installed on curbside front V-nose wall (or flat front wall) down low, for easy access from side door. If you want another inside location mount, you must specify in your checkout notes.

Spare Tire Mount Bracket on Outside Front (Requires Flat Front or Must Add Extended Tongue on V-Nose Model)

Outside spare mount bracket. Will fit on a flat front model or a V-nose only with extended tongue purchased separately.

Spare-15” 5-Lug 20575R15 Aluminum Mag Wheel (Fits 5-Lug 3500/2990# Axle)

Aluminum Mag 15” spare fits any model with 5-lug 3500/2990# axle. Will be ”loose” in trailer unless you purchase a spare mount bracket separately.

Spare-15” 5-Lug 20575R15 Standard Steel Wheel (Fits 5-Lug 3500/2990# Axle)

Matching standard 15” spare fits any model with 5-lug 3500/2990# axle. Will be ”loose” in trailer unless you purchase a spare mount bracket separately.

Spare-15” 6-Lug 22575R15 Aluminum Mag Wheel (Fits 6-Lug 5200# Axle)

Aluminum Mag 15” spare fits any model with 6-lug 5200# axle. Will be ”loose” in trailer unless you purchase a spare mount bracket separately.

Spare-15” 6-Lug 22575R15 Standard Steel Wheel (Fits 6-Lug 5200# Axle)

Matching standard 15” spare fits any model with 6-lug 5200# axle. Will be ”loose” in trailer unless you purchase a spare mount bracket separately.

Spare-16” 8-Lug 23580R16 Aluminum Mag Wheel (Fits 8-Lug 7k or 8k Axle)

Aluminum Mag 16” spare fits any model with 8-lug 7000# or 8000#axle. Will be ”loose” in trailer unless you purchase a spare mount bracket separately.

Spare-16” 8-Lug 23580R16 Standard Steel Wheel (Fits 8-Lug 7k or 8k Axle)

Matching standard 16” spare fits any model with 8-lug 7000# or 8000# axle. Will be ”loose” in trailer unless you purchase a spare mount bracket separately.

Spare-16” 8-Lug 23580R16 Standard Steel Wheel w/14 Ply Tire (Fits 8-Lug 7k or 8k Axle w/14 Ply Upgraded Tires)

If you first purchase the upgrade to 14 ply tires (from standard 10 ply) on a 7k or 8k axle model, this is the matching 14 ply 16” spare that fits any model with 8-lug 7000# or 8000# axle. Will be ”loose” in trailer unless you purchase a spare mount bracket separately.

Tire Size-Upgrade the Standard 5-Lug 205 15” Tire to 225 15” Tire (wider C to D rated tire) Price Per Each Tire

Choose this to upgrade from the standard size tire on a single 3500/2990 lb 5-lug single or tandem axle model. Add to cart, then change quantity in to number of wheels on trailer you are ordering. SA= 2, TA= 4

Tire Size-Upgrade Tires on 8-Lug 10k Axle Model from Standard 17.5” 14 Ply (G-rated) to 16 Ply (H-rated) Price Per Tire

For any model with 10k capacity 8-lug axles. Upgrade price is per tire. Add to cart and then change the quantity in cart to number of wheels for trailer size you are ordering. Tandem Axle=4, Triple Axle=6

Tire Size-Upgrade Tires on Any 7k or 8k 8-Lug Axle Model from Standard 16” 10 Ply (E-rated) to 14 Ply (G-rated) Price Per Tire

For any model with 7k or 8k  8-lug axles. Upgrade price is per tire. Add to cart and then change the quantity in cart to number of wheels for trailer size you are ordering. Tandem Axle=4, Triple Axle=6

Upgrade Standard 16” 8-Lug Wheel to 17.5” 8-Lug Wheel-Fits 7k or 8k Axles (Price per wheel)

If your trailer has standard 8-lug 16” wheels, this will upgrade them to 8-lug 17.5” wheels. Price is per wheel. Add to cart then update quantity in cart to number of wheels on your trailer. TA= 4, Triple axle= 6

15” Wide x 18” High Vertical Stationary Window (normally installed in a side door)

No slider. Stationary glass.

15” Wide x 30” High Vertical Slider Window

Can be centered in a walk through door. Can also be installed in your choice side wall location.

30” Wide x 15” High Horizontal Slider Window

Can be installed in your choice side wall location.

30” Wide x 30” High Side-to-Side Slider Window

Can be installed in your choice side wall location.

Egress (Emergency Escape) Window-36” x 36”

Installed in any side location of your choice. This is a window as used in camper trailers to allow the inside occupant(s) to open the window from the inside and exit through the window in case of an emergency situation.