Sale!

Freedom 8.5' X 38' Gooseneck Triple Axle Cargo Trailer (30' Box+8' Riser)

* Pay the required build deposit amount with order. Pay remainder at or before pick up or delivery.
Standard TrailerAdd to Cart
View Cart
View Custom Options
Trailer and Your OptionsAdd to Cart
Back to Trailer
Standard Features
Select Colors
Choose Custom Options
         Freedom 8.5 X 36 Triple Axle Gooseneck Trailer Standard Equipment
  • Floor Cross Members 16 Inches On Center
  • Roof Bow Members 24 Inches On Center
  • Side Wall Posts 16 Inches On Center
  • Hydraulic Landing Gear w/12V Marine Battery
  • Goose-neck adjustable Hitch Stem
  • 2 5/16 Inch Coupler w/Safety Chains
  • Inside Height 6' 9" (81") (35" in the 8' Riser)
  • .030 Ext Screwed Aluminum (color matched screws)
  • ATP 12" Tall Bottom Trim- Sides & Rear
  • ATP Under Front Riser w/Keyed Access Door 
  • 12-volt Dome Lights X 2
  • Raw Luan Ceiling Liner
  • Heavy Duty Ramp Rear Door w/Wood Flap
  • No-Show 4' Beaver Tail (sloped) Rear Floor
  • Painted Undercoating-All Exposed Metal
  • 7 Way Bargman Wiring Plug w/Harness
  • Safety Breakaway Kit DOT Approved
  • Manual Non-Powered Roof Vent x 2
  • 3/4 Inch Plywood Flooring
  • 3/8 Inch Plywood Walls
  • 23580R16 Radial 16" Trailer Tires
  • Steel 8-Lug Wheels w/EZ Lube Hubs
  • 8" I-Beam Frame w/7-1/2" Floor Cross Members
  • 7000lb Torsion Axles X 3 (21,000# GVWR)
  • Electric Brakes X 3 Axles
  • Interior Fender Wells
  • Aluminum Fender Skirts
  • 36" Side Door w/ Recessed ATP Step Well
  • RV Style Key Lock & Bar Lock on Side Door
  • Keyed Access Door In Riser Face
  • Easy Access Junction Box on Riser
  • Built-in Cabinet & Step Inside Under Riser
  • DOT Reflective Tape Sides
  • 5,000 lb D-Rings w/ Backer Plate X 4
  • LED Tail & Running Lights
  • 5-Yr Limited Structure Warranty (Factory Issued)
Select Your Color(s)
Customize Your Trailer

Click on One Color Choice or Two to Three Colors Combo Choice

  • FREE Colors in .030 Standard Metal

    Indigo Blue .030
    Forest Green .030
    Brandywine .030
    Champagne .030
    Yellow .030
    Orange .030
    Pewter .030
    Charcoal Gray .030
    Red .030
    Black .030
    White .030
  • Color Pricing

    Any Standard Color FREE
    Any 2 Color Combo $30.00 per Linear Foot
    Any 3 Color Combo $60.00 per Linear Foot

Click a Category Below to Add Custom Options

    • 10' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,125.00

      (Deposit: $1,125.00)
      Add to Cart

      12' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,149.00

      (Deposit: $1,149.00)
      Add to Cart

      14' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,199.00

      (Deposit: $1,199.00)
      Add to Cart

      16' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,249.00

      (Deposit: $1,249.00)
      Add to Cart

      18' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,299.00

      (Deposit: $1,299.00)
      Add to Cart

      20' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,349.00

      (Deposit: $1,349.00)
      Add to Cart

      22' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,399.00

      (Deposit: $1,399.00)
      Add to Cart

      24' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,499.00

      (Deposit: $1,499.00)
      Add to Cart

      25' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,599.00

      (Deposit: $1,599.00)
      Add to Cart

      8' Awning-12V Electric Powered-Installed On Side of Trailer (Requires Min 7' Inside Trailer Height)

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      Normally installed on curb side. Requires minimum 7' inside trailer height to accommodate awning arms on side of trailer. Includes 12V battery power. Awning size you order must be at least 2 feet shorter than the trailer length you are ordering to have room to mount awning. Manufactured by Lippert. Color choices available are black fading to white or solid black. Specify color choice in your checkout notes.

      $1,099.00

      (Deposit: $1,099.00)
      Add to Cart

      Weather Proof Shield Added on Any Awning Size

      If ordering an awning in any size, add this option to have the weather proof shield cover on the awning when it is closed, to help protect the fabric from the elements.

      If ordering an awning in any size, add this option to have the weather proof shield cover on the awning when it is closed, to help protect the fabric from the elements.

      $299.00

      (Deposit: $299.00)
      Add to Cart
    • 6” I-Beam Main Frame Upgrade on Any Standard 3” or 4” Tube Frame Model

      Upgrade any size standard with a 3” or 4” tube main frame to 6” I-Beam main frame.

      Upgrade any size standard with a 3” or 4” tube main frame to 6” I-Beam main frame.

      $225.00

      (Deposit: $225.00)
      Add to Cart

      Any Tandem Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      $799.00

      (Deposit: $799.00)
      Add to Cart

      Any TRIPLE Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      $999.00

      (Deposit: $999.00)
      Add to Cart

      Narrow Track SINGLE Axle Upgrade on Any 6' or 7' Wide SA Model (Places wheel well boxes inside trailer) Requires Separate Purchase Upgrade to 6” I-Beam Frame

      Choose this option on any 6' or 7' wide single axle model if you want to place the wheels under the trailer with no outside fenders. Wheel well boxes will be on inside of trailer with exterior fender skirts. (Note: When ordering this option you must also separately purchase the upgrade to 6” I-beam frame)

      Choose this option on any 6' or 7' wide single axle model if you want to place the wheels under the trailer with no outside fenders. Wheel well boxes will be on inside of trailer with exterior fender skirts. (Note: When ordering this option you must also separately purchase the upgrade to 6” I-beam frame)

      $300.00

      (Deposit: $300.00)
      Add to Cart

      Narrow Track TANDEM Axle Upgrade on Any 6' or 7' Wide TA Model (Places wheel well boxes inside trailer) Requires Separate Purchase Upgrade to 6” I-Beam Frame

      Choose this option on any 6' or 7' wide tandem axle model if you want to place the wheels under the trailer with no outside fenders. Wheel well boxes will be on inside of trailer with exterior fender skirts. (Note: When ordering this option you must also separately purchase the upgrade to 6” I-beam frame)

      Choose this option on any 6' or 7' wide tandem axle model if you want to place the wheels under the trailer with no outside fenders. Wheel well boxes will be on inside of trailer with exterior fender skirts. (Note: When ordering this option you must also separately purchase the upgrade to 6” I-beam frame)

      $575.00

      (Deposit: $575.00)
      Add to Cart

      Upgrade 26' or 28' Tandem Drop Leaf Axles Bumper Pull Model to TRIPLE 5200# TORSION Axles (15,600 GVWR) Available on 26- or 28' Only

      Only available on 26' or 28' bumper pull models. Choose this to add a 3rd axle, upgrading it to triple 5200# torsion axles (15,600 GVWR).

      Only available on 26' or 28' bumper pull models. Choose this to add a 3rd axle, upgrading it to triple 5200# torsion axles (15,600 GVWR).

      $1,550.00

      (Deposit: $1,550.00)
      Add to Cart

      Upgrade 34' TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to 8000# TORSION Axles

      Only available on 8.5 x 34. Choose this option to upgrade only the 34' long model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 8000# capacity TORSION axles. Also upgrades to 10” I-beam frame, larger 17.5” wheels. HD Tongue and jack.

      Only available on 8.5 x 34. Choose this option to upgrade only the 34' long model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 8000# capacity TORSION axles. Also upgrades to 10” I-beam frame, larger 17.5” wheels. HD Tongue and jack.

      $5,999.00

      (Deposit: $5,999.00)
      Add to Cart

      Upgrade 34' TRIPLE Axle Standard 6-lug 5200# Drop Leaf Spring Axles Model to 10,000# TORSION 8-Lug Axles

      Only available on 8.5 x 34. Choose this option to upgrade only the 34' long model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 10,000# capacity 8-lug TORSION axles. Also upgrades to 10” I-beam frame, larger wheels. HD Tongue and jack.

      Only available on 8.5 x 34. Choose this option to upgrade only the 34' long model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 10,000# capacity 8-lug TORSION axles. Also upgrades to 10” I-beam frame, larger wheels. HD Tongue and jack.

      $8,399.00

      (Deposit: $8,399.00)
      Add to Cart

      Upgrade Any Standard SINGLE 3500/2990# Idler (no brake) Axle Model to 3500# Single Axle w/Electric Brakes

      This will upgrade any single axle model to an electric brake axle and adds the required safety breakaway kit. This axle requires your vehicle to have a brake controller and a 7-way plug on your vehicle as any trailer with electric brakes.

      This will upgrade any single axle model to an electric brake axle and adds the required safety breakaway kit. This axle requires your vehicle to have a brake controller and a 7-way plug on your vehicle as any trailer with electric brakes.

      $300.00

      (Deposit: $300.00)
      Add to Cart

      Upgrade From 8” I-Beam Main Frame to 10” I-Beam Main Frame (For 26' or Longer Goosenecks or Bumper Pulls) REQUIRED on ANY Model w/8k or 10k Axles Upgrade

      Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are also upgrading tandem axles to 8k or 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering 8k or 10k axle upgrade on any tandem axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

      Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are also upgrading tandem axles to 8k or 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering 8k or 10k axle upgrade on any tandem axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

      $500.00

      (Deposit: $500.00)
      Add to Cart

      Upgrade Tandem 3500# Drop Leaf Axles (7k GVWR) Bumper Pull Model to TRIPLE 5200# Drop Leaf Axles (15,600 GVWR)

      Choose this to add a 3rd drop leaf spring axle to any standard 3500# tandem axle bumper model, upgrading it to triple 5200# drop leaf spring axles (15,600 GVWR). Also upgrades to 6-lug wheels and larger 15” tires

      Choose this to add a 3rd drop leaf spring axle to any standard 3500# tandem axle bumper model, upgrading it to triple 5200# drop leaf spring axles (15,600 GVWR). Also upgrades to 6-lug wheels and larger 15” tires

      $1,550.00

      (Deposit: $1,550.00)
      Add to Cart

      Upgrade Tandem 3500# Drop Leaf Axles (7k GVWR) Bumper Pull Model to TRIPLE 7000# Drop Leaf Axles (21,000 GVWR)

      Choose this to add a 3rd drop leaf spring axle to any standard 3500# tandem axle bumper pull model, upgrading it to triple 7000# drop leaf spring axles (21,000 GVWR). Also upgrades to 8-lug 16” wheels and larger 16” tires. Upgrades to HD coupler and jack.

      Choose this to add a 3rd drop leaf spring axle to any standard 3500# tandem axle bumper pull model, upgrading it to triple 7000# drop leaf spring axles (21,000 GVWR). Also upgrades to 8-lug 16” wheels and larger 16” tires. Upgrades to HD coupler and jack.

      $2,100.00

      (Deposit: $2,100.00)
      Add to Cart

      Upgrade Tandem 3500# Drop Leaf Axles (7k GVWR) Bumper Pull Model to TRIPLE 7000# TORSION Axles (21,000 GVWR)

      Choose this to add a 3rd axle to any standard 3500# drop leaf tandem axle bumper pull model, upgrading it to triple 7000# TORSION axles (21,000 GVWR). Also upgrades frame and to 8-lug 16” wheels and tires. Upgrades to HD coupler and jack.

      Choose this to add a 3rd axle to any standard 3500# drop leaf tandem axle bumper pull model, upgrading it to triple 7000# TORSION axles (21,000 GVWR). Also upgrades frame and to 8-lug 16” wheels and tires. Upgrades to HD coupler and jack.

      $2,500.00

      (Deposit: $2,500.00)
      Add to Cart

      Upgrade Tandem 3500# Drop Leaf Axles Bumper Pull Model to TRIPLE 3500# Drop Leaf Axles (10,500 GVWR)

      Choose this to add a 3rd axle of the same 3500# capacity on a standard tandem 3500# drop leaf axle model (7k GVWR), upgrading it to triple 3500# drop leaf spring axles (10,500 GVWR).

      Choose this to add a 3rd axle of the same 3500# capacity on a standard tandem 3500# drop leaf axle model (7k GVWR), upgrading it to triple 3500# drop leaf spring axles (10,500 GVWR).

      $950.00

      (Deposit: $950.00)
      Add to Cart

      Upgrade Tandem 3500# Drop Leaf Axles Bumper Pull Model to TRIPLE 3500# TORSION Axles (10,500 GVWR)

      Choose this to add a 3rd axle of the same 3500# capacity on a standard tandem 3500# drop leaf axle model (7k GVWR), upgrading it to triple 3500# TORSION axles (10,500 GVWR).

      Choose this to add a 3rd axle of the same 3500# capacity on a standard tandem 3500# drop leaf axle model (7k GVWR), upgrading it to triple 3500# TORSION axles (10,500 GVWR).

      $1,295.00

      (Deposit: $1,295.00)
      Add to Cart

      Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 10,000# TORSION Axles w/Frame Upgrade

      Choose this to upgrade any bumper pull model standard with tandem 3500# (7k GVWR) drop leaf axles to maximum capacity 10,000# (20k GVWR) Torsion axles, with electric brakes. Also upgrades the frame to  10” I-Beam and upgrades to larger wheels and to HD coupler and jack.

      Choose this to upgrade any bumper pull model standard with tandem 3500# (7k GVWR) drop leaf axles to maximum capacity 10,000# (20k GVWR) Torsion axles, with electric brakes. Also upgrades the frame to  10” I-Beam and upgrades to larger wheels and to HD coupler and jack.

      $5,695.00

      (Deposit: $5,695.00)
      Add to Cart

      Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 3500# Torsion Axles

      Choose this to upgrade any model standard with tandem 3500# drop leaf axles to same capacity in torsion axles.

      Choose this to upgrade any model standard with tandem 3500# drop leaf axles to same capacity in torsion axles.

      $525.00

      (Deposit: $525.00)
      Add to Cart

      Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 5200# Drop Leaf Spring Axles

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 5200# drop leaf axles. with electric brakes.

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 5200# drop leaf axles. with electric brakes.

      $725.00

      (Deposit: $725.00)
      Add to Cart

      Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 5200# TORSION Axles

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 5200# and Torsion axles, with electric brakes.

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 5200# and Torsion axles, with electric brakes.

      $995.00

      (Deposit: $995.00)
      Add to Cart

      Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 7000# Drop Leaf Spring Axles

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 7000# drop leaf axles, with electric brakes. Also upgrades to larger 16” 8-lug wheels and HD coupler and jack.

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 7000# drop leaf axles, with electric brakes. Also upgrades to larger 16” 8-lug wheels and HD coupler and jack.

      $1,325.00

      (Deposit: $1,325.00)
      Add to Cart

      Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 7000# TORSION Axles

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 7000# Torsion axles, with electric brakes. Also upgrades to 16” 8-lug wheels and to HD coupler and jack.

      Choose this to upgrade any bumper pull model standard with tandem 3500# drop leaf axles to more capacity 7000# Torsion axles, with electric brakes. Also upgrades to 16” 8-lug wheels and to HD coupler and jack.

      $1,575.00

      (Deposit: $1,575.00)
      Add to Cart

      Upgrade TANDEM AXLE Model From Standard 3500# Drop Leaf Axles to 8000# TORSION Axles w/Frame Upgrade

      Choose this to upgrade any bumper pull model standard with tandem 3500# (7k GVWR) drop leaf axles to more capacity 8000# (16k GVWR) Torsion axles, with electric brakes. Also upgrades the frame to  10” I-Beam and upgrades to 17.5” 8-lug wheels and to HD coupler and jack.

      Choose this to upgrade any bumper pull model standard with tandem 3500# (7k GVWR) drop leaf axles to more capacity 8000# (16k GVWR) Torsion axles, with electric brakes. Also upgrades the frame to  10” I-Beam and upgrades to 17.5” 8-lug wheels and to HD coupler and jack.

      $3,595.00

      (Deposit: $3,595.00)
      Add to Cart

      Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 10,000# Tandem TORSION Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 10,000# TORSION axles. Also upgrades main frame to 10” I-Beam. Also upgrades to larger 17.5” wheels. Upgrades to HD coupler and jack.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 10,000# TORSION axles. Also upgrades main frame to 10” I-Beam. Also upgrades to larger 17.5” wheels. Upgrades to HD coupler and jack.

      $6,499.00

      (Deposit: $6,499.00)
      Add to Cart

      Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# Tandem Drop Leaf Spring Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 7000# tandem drop leaf spring axles. Also upgrade to larger 8-lug 16” wheels. Upgrades to HD coupler and jack.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 7000# tandem drop leaf spring axles. Also upgrade to larger 8-lug 16” wheels. Upgrades to HD coupler and jack.

      $875.00

      (Deposit: $875.00)
      Add to Cart

      Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# Tandem TORSION Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 7000# TORSION axles. Also upgrades to larger 8-lug 16” wheels. Upgrades to HD coupler and jack.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 7000# TORSION axles. Also upgrades to larger 8-lug 16” wheels. Upgrades to HD coupler and jack.

      $1,095.00

      (Deposit: $1,095.00)
      Add to Cart

      Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to 8000# Tandem TORSION Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 8000# TORSION axles. Also upgrades main frame to 10” I-Beam. Also upgrades to larger 17.5” wheels. Upgrades to HD coupler and jack.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to 8000# TORSION axles. Also upgrades main frame to 10” I-Beam. Also upgrades to larger 17.5” wheels. Upgrades to HD coupler and jack.

      $3,999.00

      (Deposit: $3,999.00)
      Add to Cart

      Upgrade Tandem Axle Standard 5200# Drop Leaf Spring Axles Model to Same Capacity TORSION Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to the same 5200# capacity TORSION axles.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# tandem drop leaf axles to the same 5200# capacity TORSION axles.

      $599.00

      (Deposit: $599.00)
      Add to Cart

      Upgrade TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# Drop Leaf Spring Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 7000# capacity drop leaf spring axles. Also upgrades to larger 8-lug 16” wheels. HD Tongue and jack.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 7000# capacity drop leaf spring axles. Also upgrades to larger 8-lug 16” wheels. HD Tongue and jack.

      $1,099.00

      (Deposit: $1,099.00)
      Add to Cart

      Upgrade TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to 7000# TORSION Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 7000# capacity TORSION axles. Also upgrades to larger 8-lug 16” wheels. HD Tongue and jack.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to TRIPLE 7000# capacity TORSION axles. Also upgrades to larger 8-lug 16” wheels. HD Tongue and jack.

      $1,399.00

      (Deposit: $1,399.00)
      Add to Cart

      Upgrade TRIPLE Axle Standard 5200# Drop Leaf Spring Axles Model to Same Capacity TORSION Axles

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to the same 5200# capacity TORSION axles.

      Choose this option to upgrade any bumper pull model standard with 6-lug 5200# TRIPLE drop leaf axles to the same 5200# capacity TORSION axles.

      $799.00

      (Deposit: $799.00)
      Add to Cart
    • Any Tandem Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      $799.00

      (Deposit: $799.00)
      Add to Cart

      Any TRIPLE Axle 8.5 Wide Upgraded to Spread (California Style) Axles-Requires Torsion Axles

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      Only available on 8.5 wide models and must also purchase torsion axle upgrade on any bumper pull model. (Goosenecks come standard with torsion axles). Has two separate fender boxes & fenderettes on each side.

      $999.00

      (Deposit: $999.00)
      Add to Cart

      CHANGE Any TRIPLE Axle Gooseneck From Standard 7000# Triple Torsion Axles to TANDEM 8000# Torsion Axles (Reduces GVWR))

      Choose this option to change any standard TRIPLE 7,000# torsion axle model to TANDEM 8,000# torsion axles. Reduces trailer total GVWR from 21,000# to 16,000# GVWR

      Choose this option to change any standard TRIPLE 7,000# torsion axle model to TANDEM 8,000# torsion axles. Reduces trailer total GVWR from 21,000# to 16,000# GVWR

      $2,199.00

      (Deposit: $2,199.00)
      Add to Cart

      Upgrade Any Gooseneck Triple Axle Model From Standard 7000# Torsion Axles to 8000# Torsion Axles

      Choose this to upgrade any standard triple axle gooseneck model from 7,000# to 8,000# torsion axles. Includes frame upgrade on any gooseneck model that's standard with less than 10” frame.

      Choose this to upgrade any standard triple axle gooseneck model from 7,000# to 8,000# torsion axles. Includes frame upgrade on any gooseneck model that's standard with less than 10” frame.

      $4,299.00

      (Deposit: $4,299.00)
      Add to Cart

      Upgrade Any Standard 5200# Tandem Torsion Axle Gooseneck to TRIPLE 5200# Torsion Axles (Adds 3rd Axle)

      Choose this option to upgrade any tandem axle gooseneck model from tandem 5200# torsion to triple# torsion axles. This adds a third 5200# axle with brakes and increases GVWR from 10,400# to 15,600#

      Choose this option to upgrade any tandem axle gooseneck model from tandem 5200# torsion to triple# torsion axles. This adds a third 5200# axle with brakes and increases GVWR from 10,400# to 15,600#

      $699.00

      (Deposit: $699.00)
      Add to Cart

      Upgrade Any Standard 5200# Tandem Torsion Axle Gooseneck to TRIPLE 7000# Torsion Axles

      Choose this option to upgrade any tandem axle gooseneck model from the standard tandem 5200# torsion to triple 7000# torsion axles. Also upgrades to 8-lug 16” wheels. This increases axle capacity and adds a third axle and increases the GVWR from 10,400# to 21,000#

      Choose this option to upgrade any tandem axle gooseneck model from the standard tandem 5200# torsion to triple 7000# torsion axles. Also upgrades to 8-lug 16” wheels. This increases axle capacity and adds a third axle and increases the GVWR from 10,400# to 21,000#

      $1,699.00

      (Deposit: $1,699.00)
      Add to Cart

      Upgrade Any Standard 5200# Tandem Torsion Axle Gooseneck to TRIPLE 8000# Torsion Axles

      Choose this option to upgrade any tandem axle gooseneck model from the standard tandem 5200# torsion to triple 8000# torsion axles. Also upgrades to 10” main frame and upgrades to 8-lug 16” wheels. This increases axle capacity and adds a third axle and increases the GVWR from 10,400# to 24,000#

      Choose this option to upgrade any tandem axle gooseneck model from the standard tandem 5200# torsion to triple 8000# torsion axles. Also upgrades to 10” main frame and upgrades to 8-lug 16” wheels. This increases axle capacity and adds a third axle and increases the GVWR from 10,400# to 24,000#

      $5,199.00

      (Deposit: $5,199.00)
      Add to Cart

      Upgrade Any TA Gooseneck From Standard 5200# Tandem Torsion Axles to 7000# Torsion Axles

      Choose this option to upgrade any tandem axle gooseneck model from 5200# torsion to 7000# torsion axles. Also upgrades from 6-lug 15” wheels to 8-lug 16” wheels.

      Choose this option to upgrade any tandem axle gooseneck model from 5200# torsion to 7000# torsion axles. Also upgrades from 6-lug 15” wheels to 8-lug 16” wheels.

      $999.00

      (Deposit: $999.00)
      Add to Cart

      Upgrade Any TA Gooseneck From Standard 5200# Tandem Torsion Axles to 8000# Torsion Axles

      Choose this option to upgrade any tandem axle gooseneck model from 5200# torsion to 8000# torsion axles. Also upgrades frame to 10” and upgrades from 6-lug 15” wheels to 8-lug 16” wheels.

      Choose this option to upgrade any tandem axle gooseneck model from 5200# torsion to 8000# torsion axles. Also upgrades frame to 10” and upgrades from 6-lug 15” wheels to 8-lug 16” wheels.

      $2,999.00

      (Deposit: $2,999.00)
      Add to Cart

      Upgrade Any TA Gooseneck From Standard 7000# Tandem Torsion Axles to 10,000# Torsion Axles

      Choose this option to upgrade any tandem axle gooseneck model from 7000# torsion to 10,000# torsion axles.

      Choose this option to upgrade any tandem axle gooseneck model from 7000# torsion to 10,000# torsion axles.

      $5,999.00

      (Deposit: $5,999.00)
      Add to Cart

      Upgrade Any TA Gooseneck From Standard 7000# Tandem Torsion Axles to 8000# Torsion Axles

      Choose this option to upgrade any tandem axle gooseneck model from 7000# torsion to 8000# torsion axles.

      Choose this option to upgrade any tandem axle gooseneck model from 7000# torsion to 8000# torsion axles.

      $2,899.00

      (Deposit: $2,899.00)
      Add to Cart

      Upgrade Any TA Gooseneck From Standard 7000# TANDEM Torsion Axles to TRIPLE 10,000# Torsion Axles (Adds 3rd Axle)

      Choose this option to upgrade any tandem axle gooseneck model from tandem 7000# torsion to triple 10,000# torsion axles. Upgrades the axle capacity and adds a 3rd axle.

      Choose this option to upgrade any tandem axle gooseneck model from tandem 7000# torsion to triple 10,000# torsion axles. Upgrades the axle capacity and adds a 3rd axle.

      $8,799.00

      (Deposit: $8,799.00)
      Add to Cart

      Upgrade Any TRIPLE Axle Gooseneck From Standard 7000# Triple Torsion Axles to 10,000# Torsion Axles

      Choose this option to upgrade any standard TRIPLE axle gooseneck model from 7000# torsion to 10,000# torsion axles.

      Choose this option to upgrade any standard TRIPLE axle gooseneck model from 7000# torsion to 10,000# torsion axles.

      $7,999.00

      (Deposit: $7,999.00)
      Add to Cart

      Upgrade Any TRIPLE Axle Gooseneck From Standard 7000# Triple Torsion Axles to 8000# Torsion Axles

      Choose this option to upgrade any standard TRIPLE axle gooseneck model from 7000# torsion to 8000# torsion axles.

      Choose this option to upgrade any standard TRIPLE axle gooseneck model from 7000# torsion to 8000# torsion axles.

      $4,899.00

      (Deposit: $4,899.00)
      Add to Cart

      Upgrade From 8” I-Beam Main Frame to 10” I-Beam Main Frame (For 26' or Longer Goosenecks or Bumper Pulls) REQUIRED on ANY Model w/8k or 10k Axles Upgrade

      Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are also upgrading tandem axles to 8k or 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering 8k or 10k axle upgrade on any tandem axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

      Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are also upgrading tandem axles to 8k or 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering 8k or 10k axle upgrade on any tandem axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

      $500.00

      (Deposit: $500.00)
      Add to Cart
    • Dog Tub w/Water Service (Requires Minimum 7' Wide TA Model)

      Includes: Dog bath tub w/sprayer, holding tanks with fill/drain valves, 2.5 gal 110V water heater, 12V or 110V water pump. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      Includes: Dog bath tub w/sprayer, holding tanks with fill/drain valves, 2.5 gal 110V water heater, 12V or 110V water pump. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      $5,499.00

      (Deposit: $5,499.00)
      Add to Cart

      Full-Bath 4'x6' (with shower) Package (Requires Minimum 7' Wide TA Model)

      This full-bath takes up 6' of inside box length. Includes: 32”x32” shower, toilet, holding tanks with fill/drain valves, 110V 2.5 gal water heater, choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light & roof vent, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      This full-bath takes up 6' of inside box length. Includes: 32”x32” shower, toilet, holding tanks with fill/drain valves, 110V 2.5 gal water heater, choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light & roof vent, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      $3,999.00

      (Deposit: $3,999.00)
      Add to Cart

      Half-Bath (no shower) Package-(Requires Minimum 7' Wide TA Model)

      This half-bath takes 4' of inside box length. Includes: Toilet, holding tanks with fill/drain valves, 2.5 gal 110V water heater,  choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      This half-bath takes 4' of inside box length. Includes: Toilet, holding tanks with fill/drain valves, 2.5 gal 110V water heater,  choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      $2,999.00

      (Deposit: $2,999.00)
      Add to Cart

      Shower & Sink Package-NO TOILET (Requires Minimum 7' Wide TA Model)

      This package has no toilet. Includes: 32”x32” shower, holding tanks with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      This package has no toilet. Includes: 32”x32” shower, holding tanks with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump, hand wash sink in base cabinet, plywood walls with door, 12V light, GFI wall outlet. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      $3,599.00

      (Deposit: $3,599.00)
      Add to Cart

      Shower ONLY w/Water Service (Requires Minimum 7' Wide TA Model)

      This package has no toilet, no sink, only a shower. Includes: 32”x32” shower, holding tanks with fill/drain valves, 2.5 gal 110V water heater, 12V or 110V water pump, plywood divider wall with door. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      This package has no toilet, no sink, only a shower. Includes: 32”x32” shower, holding tanks with fill/drain valves, 2.5 gal 110V water heater, 12V or 110V water pump, plywood divider wall with door. (NOTE: Power source is not included in package. Must purchase 12V battery power or 110V electrical power service separately if desired).

      $1,999.00

      (Deposit: $1,999.00)
      Add to Cart

      Tankless On-Demand Water Heater UPGRADE

      This will upgrade from a standard 2.5 gal 110V water heater to an on-demand tankless 110V water heater. Must purchase electrical service separately if desired.

      This will upgrade from a standard 2.5 gal 110V water heater to an on-demand tankless 110V water heater. Must purchase electrical service separately if desired.

      $400.00

      (Deposit: $400.00)
      Add to Cart

      Toilet Only w/Water Supply (Minimum 7' Wide Tandem Axle Model)

      Includes: Toilet, holding tanks, fill and drain valves, cabinet, 12V battery power supply & 12V water pump, w/walls.

      Includes: Toilet, holding tanks, fill and drain valves, cabinet, 12V battery power supply & 12V water pump, w/walls.

      $1,699.00

      (Deposit: $1,699.00)
      Add to Cart

      Urinal Added to Any Toilet Bath Package (wall mounted)

      Add a urinal on the wall with any bath package you purchase separately that also has a toilet.

      Add a urinal on the wall with any bath package you purchase separately that also has a toilet.

      $1,099.00

      (Deposit: $1,099.00)
      Add to Cart

      Water Heater UPGRADE From Standard 2.5 Gal to 12 Gal

      If you are purchasing any water package separately that includes the 2.5 gal water heater, and want to upgrade to a larger capacity hot water heater, this will upgrade from the standard 2.5 gal to 12 gal capacity 110V water heater. Note: Electrical must be purchased separately if desired.

      If you are purchasing any water package separately that includes the 2.5 gal water heater, and want to upgrade to a larger capacity hot water heater, this will upgrade from the standard 2.5 gal to 12 gal capacity 110V water heater. Note: Electrical must be purchased separately if desired.

      $799.00

      (Deposit: $799.00)
      Add to Cart
    • 24” Wide Wardrobe Closet Floor-to-Ceiling (No Shelves)

      Adds one 24” wide wardrobe closet your choice wall location.

      Adds one 24” wide wardrobe closet your choice wall location.

      $795.00

      (Deposit: $795.00)
      Add to Cart

      Base ”L” Shaped 36” High Cabinets Across Front Wall-Any Width Model (Must be a flat front)

      This adds 36” high base cabinets with doors and countertop across the front wall of any width flat front trailer, with the L cabinet turning the corner.

      This adds 36” high base cabinets with doors and countertop across the front wall of any width flat front trailer, with the L cabinet turning the corner.

      $1,200.00

      (Deposit: $1,200.00)
      Add to Cart

      Base Cabinets By the Foot-(36” High) Deluxe Aluminum Frame w/Aluminum Over Plywood Countertop ($110 per foot)

      Base cabinets with doors only, installed on side walls by the foot. Constructed with 5/16” square aluminum frame covered in .024 white aluminum metal. Add to cart then update cart to number of feet of cabinet you desire.

      Base cabinets with doors only, installed on side walls by the foot. Constructed with 5/16” square aluminum frame covered in .024 white aluminum metal. Add to cart then update cart to number of feet of cabinet you desire.

      $110.00

      (Deposit: $110.00)
      Add to Cart

      Base Cabinets Only w/Set of (4) Drawers Included-Straight Across 7' Wide Model (V-Nose Front Wall Only)

      This adds only the 36” high base cabinets with doors, also includes a set of four drawers, with countertop across front wall on a 7' wide model. Has to be a V-nose front.

      This adds only the 36” high base cabinets with doors, also includes a set of four drawers, with countertop across front wall on a 7' wide model. Has to be a V-nose front.

      $975.00

      (Deposit: $975.00)
      Add to Cart

      Base Cabinets Only w/Set of (4) Drawers Included-Straight Across 8.5' Wide Model (V-Nose Front Wall Only)

      This adds only the 36” high base cabinets with doors, also includes a set of four drawers, with countertop across front wall on a 8.5' wide model. Has to be a V-nose front.

      This adds only the 36” high base cabinets with doors, also includes a set of four drawers, with countertop across front wall on a 8.5' wide model. Has to be a V-nose front.

      $1,175.00

      (Deposit: $1,175.00)
      Add to Cart

      Base Cabinets Only-Straight Across 6' Wide Model V-Front or Flat Front Wall

      This adds only the 36” high base cabinets with doors and countertop across front wall on a 6' wide model.

      This adds only the 36” high base cabinets with doors and countertop across front wall on a 6' wide model.

      $649.00

      (Deposit: $649.00)
      Add to Cart

      Base Cabinets Only-Straight Across 7' Wide Model V-Front or Flat Front Wall

      This adds only the 36” high base cabinets with doors and countertop across front wall on a 7' wide model.

      This adds only the 36” high base cabinets with doors and countertop across front wall on a 7' wide model.

      $725.00

      (Deposit: $725.00)
      Add to Cart

      Base Cabinets Only-Straight Across 8.5' Wide Model V-Front or Flat Front Wall

      This adds only the 36” high base cabinets with doors and countertop across front wall on a 8.5 ' wide model.

      This adds only the 36” high base cabinets with doors and countertop across front wall on a 8.5 ' wide model.

      $800.00

      (Deposit: $800.00)
      Add to Cart

      Countertop Work Table-Aluminum Covered Over Plywood-24” Deep ($80 Per foot)

      This table top is plywood covered in mill finish aluminum. Can be added on your choice side wall location. Price is per foot. Add to cart then update cart to number of total feet of work table you desire.

      This table top is plywood covered in mill finish aluminum. Can be added on your choice side wall location. Price is per foot. Add to cart then update cart to number of total feet of work table you desire.

      $80.00

      (Deposit: $80.00)
      Add to Cart

      Countertop Work Table-Stainless Steel (non-polished) 24” Deep ($130 Per foot)

      Can be added on your choice side wall location. Price is per foot. Add to cart then update cart to number of total feet of work table you desire.

      Can be added on your choice side wall location. Price is per foot. Add to cart then update cart to number of total feet of work table you desire.

      $130.00

      (Deposit: $130.00)
      Add to Cart

      Drawers (Set of 4) Added in Any Base Cabinets

      If you are adding 36” high base cabinets and want to add a set of four drawers in the cabinets, add this option along with your base cabinet selection.

      If you are adding 36” high base cabinets and want to add a set of four drawers in the cabinets, add this option along with your base cabinet selection.

      $375.00

      (Deposit: $375.00)
      Add to Cart

      Fenderwell Cabinets Any 8.5 Wide Tandem Axle-Up to 90” Inside Height

      Cabinets installed over the inside fender well box on either side.

      Cabinets installed over the inside fender well box on either side.

      $1,050.00

      (Deposit: $1,050.00)
      Add to Cart

      Fenderwell Cabinets Any 8.5 Wide Tandem Axle-w/Over 90” Inside Height

      Cabinets installed over the inside fender well box on either side.

      Cabinets installed over the inside fender well box on either side.

      $1,295.00

      (Deposit: $1,295.00)
      Add to Cart

      Fenderwell Cabinets Any 8.5 Wide TRIPLE Axle-Up to 90” Inside Height

      Cabinets installed over the inside fender well box on either side.

      Cabinets installed over the inside fender well box on either side.

      $1,200.00

      (Deposit: $1,200.00)
      Add to Cart

      Fenderwell Cabinets Any 8.5 Wide TRIPLE Axle-w/Over 90” Inside Height

      Cabinets installed over the inside fender well box on either side.

      Cabinets installed over the inside fender well box on either side.

      $1,600.00

      (Deposit: $1,600.00)
      Add to Cart

      Serving-Prep Shelf w/Fold-Down Brackets-12” Deep Wrapped In Aluminum ($50 per foot)

      This is a 12” fold down shelf on brackets for inside or outside use, normally outside under a concession door, but can be used inside. Add to cart then update cart to how long you want each fold-down shelf you desire.

      This is a 12” fold down shelf on brackets for inside or outside use, normally outside under a concession door, but can be used inside. Add to cart then update cart to how long you want each fold-down shelf you desire.

      $50.00

      (Deposit: $50.00)
      Add to Cart

      Serving-Prep Shelf w/Fold-Down Brackets-18” Deep Wrapped In Aluminum ($55 per foot)

      This is a 18” fold down shelf on brackets for inside or outside use, normally outside under a concession door, but can be used inside. Add to cart then update cart to how long you want each fold-down shelf you desire.

      This is a 18” fold down shelf on brackets for inside or outside use, normally outside under a concession door, but can be used inside. Add to cart then update cart to how long you want each fold-down shelf you desire.

      $50.00

      (Deposit: $50.00)
      Add to Cart

      Shelf on Wall-24” Deep Plywood w/Lip ($30 per foot)

      Plywood shelf with a lip edge. Mounted your choice wall location. Price is per foot. Add to cart then update cart to number of feet of shelf you want.

      Plywood shelf with a lip edge. Mounted your choice wall location. Price is per foot. Add to cart then update cart to number of feet of shelf you want.

      $30.00

      (Deposit: $30.00)
      Add to Cart

      Shelf w/Legs-12” Deep Wrapped in Aluminum ($40 per foot)

      This is a 12” deep shelf on stationary legs. Can be placed on any wall at your height choice. Price is per foot and per shelf. Add to cart then update cart to how long you want the shelf.

      This is a 12” deep shelf on stationary legs. Can be placed on any wall at your height choice. Price is per foot and per shelf. Add to cart then update cart to how long you want the shelf.

      $40.00

      (Deposit: $40.00)
      Add to Cart

      Shelf w/Legs-18” Deep Wrapped in Aluminum ($45 per foot)

      This is a 18” deep shelf on stationary legs. Can be placed on any wall at your height choice. Price is per foot and per shelf. Add to cart then update cart to how long you want the shelf.

      This is a 18” deep shelf on stationary legs. Can be placed on any wall at your height choice. Price is per foot and per shelf. Add to cart then update cart to how long you want the shelf.

      $45.00

      (Deposit: $45.00)
      Add to Cart

      Upper Cabinets By The Foot-(18” High) Aluminum Frame Covered in Aluminum Metal ($75 Per Foot)

      Upper cabinets with doors. Built with 5/16” aluminum tube frame covered in .024 white metal. Installed on side wall. Add to cart then upgrade cart to number of feet of upper cabinet you desire. Price is per foot.

      Upper cabinets with doors. Built with 5/16” aluminum tube frame covered in .024 white metal. Installed on side wall. Add to cart then upgrade cart to number of feet of upper cabinet you desire. Price is per foot.

      $75.00

      (Deposit: $75.00)
      Add to Cart

      Upper Cabinets Only-Straight Across 6' Wide Model V-Front or Flat Front Wall

      This adds only the 18” high upper cabinets with doors across front wall on a 6' wide model.

      This adds only the 18” high upper cabinets with doors across front wall on a 6' wide model.

      $600.00

      (Deposit: $600.00)
      Add to Cart

      Upper Cabinets Only-Straight Across 7' Wide Model V-Front or Flat Front Wall

      This adds only the 18” high upper cabinets with doors across front wall on a 7' wide model.

      This adds only the 18” high upper cabinets with doors across front wall on a 7' wide model.

      $625.00

      (Deposit: $625.00)
      Add to Cart

      Upper Cabinets Only-Straight Across 8.5' Wide Model V-Front or Flat Front Wall

      This adds only the 18” high upper cabinets with doors across front wall on a 8.5' wide model.

      This adds only the 18” high upper cabinets with doors across front wall on a 8.5' wide model.

      $650.00

      (Deposit: $650.00)
      Add to Cart
    • 3' High x 10' Long (Longest Available) Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,750.00

      (Deposit: $1,750.00)
      Add to Cart

      3' High x 10' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $825.00

      (Deposit: $825.00)
      Add to Cart

      3' High x 4' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $450.00

      (Deposit: $450.00)
      Add to Cart

      3' High x 4' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,295.00

      (Deposit: $1,295.00)
      Add to Cart

      3' High x 5' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $525.00

      (Deposit: $525.00)
      Add to Cart

      3' High x 5' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,325.00

      (Deposit: $1,325.00)
      Add to Cart

      3' High x 6' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $575.00

      (Deposit: $575.00)
      Add to Cart

      3' High x 6' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,450.00

      (Deposit: $1,450.00)
      Add to Cart

      3' High x 8' Long Concession Lift-up Door (pic may not be exact door size-for illustration only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $625.00

      (Deposit: $625.00)
      Add to Cart

      3' High x 8' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,495.00

      (Deposit: $1,495.00)
      Add to Cart

      4' High x 2' Long Concession Lift-up Door

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $600.00

      (Deposit: $600.00)
      Add to Cart

      4' High x 2' Wide (Smallest) Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,550.00

      (Deposit: $1,550.00)
      Add to Cart

      4' High x 6' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $700.00

      (Deposit: $700.00)
      Add to Cart

      4' High x 6' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,595.00

      (Deposit: $1,595.00)
      Add to Cart

      4' High x 8' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $750.00

      (Deposit: $750.00)
      Add to Cart

      4' High x 8' Long Concession Lift-up Door w/Slider Glass Serving Window (pic not exact size-illustration purpose only)

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking concession door with the full width slider glass serving window. Mounted at your location choice. NOTE: If purchasing blackout package and want concession door exterior trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $1,675.00

      (Deposit: $1,675.00)
      Add to Cart

      5' High x 10' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $925.00

      (Deposit: $925.00)
      Add to Cart

      5' High x 8' Long Concession Lift-up Door (pic may not be exact size-illustration purposes only)

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      Lift-up locking door only (no window). Mounted at your location choice. NOTE: If purchasing blackout package and want concession door trim also blacked out, you must purchase the trim blackout option separately or trim will be aluminum finish.

      $800.00

      (Deposit: $800.00)
      Add to Cart

      Blackout Frame Trim on Any Size Concession Door

      If purchasing a blackout trailer and also ordering a concession door, if you want the trim on concession door also blacked out, you must also purchase this option separately.

      If purchasing a blackout trailer and also ordering a concession door, if you want the trim on concession door also blacked out, you must also purchase this option separately.

      $150.00

      (Deposit: $150.00)
      Add to Cart

      Fold-Down Door Under Any Size Concession Door

      Add  this fold-down door for access under a concession door.

      Add  this fold-down door for access under a concession door.

      $250.00

      (Deposit: $250.00)
      Add to Cart

      Gull Wing Lift Up Awning Door on Side-Any Model (Price Per Foot of Door Width)

      Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

      Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

      $140.00

      (Deposit: $140.00)
      Add to Cart

      Marquee Fold-Down Sign Option Added to Any Concession Door ($50 Per Foot of Concession Door Length)

      If ordering a concession door and want the fold-down marquee sign option added on top of door, choose this option. Price is x per foot of the length concession door you order. Add to cart then update cart to door length. Example: 3 x 6 concession door=6' of marquee added to cart.

      If ordering a concession door and want the fold-down marquee sign option added on top of door, choose this option. Price is x per foot of the length concession door you order. Add to cart then update cart to door length. Example: 3 x 6 concession door=6' of marquee added to cart.

      $50.00

      (Deposit: $50.00)
      Add to Cart
    • 6' Tall Rear Ramp Gate on Hybrid ILO Standard 4' Tall Ramp

      Choose this is you want a taller rear ramp gate on a hybrid model.

      Choose this is you want a taller rear ramp gate on a hybrid model.

      $249.00

      (Deposit: $249.00)
      Add to Cart

      Aluminum Tread Plate (ATP) Down Sides w/Long Open Rails on Hybrid Model ($10 per foot of hybrid deck)

      Add on any hybrid. Price is per foot of deck length. Add to cart then update cart to quantity matching your chosen hybrid deck length.

      Add on any hybrid. Price is per foot of deck length. Add to cart then update cart to quantity matching your chosen hybrid deck length.

      $10.00

      (Deposit: $10.00)
      Add to Cart

      Bi-Fold Rear Ramp on Hybrid Model

      Ramp gate folds.

      Ramp gate folds.

      $179.00

      (Deposit: $179.00)
      Add to Cart

      Bi-Fold Rear Ramp w/ Spring Assist on Hybrid Model

      Ramp gate folds and has the added spring assist.

      Ramp gate folds and has the added spring assist.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      Bi-Fold Rear Ramp w/ Spring Assist w/ 36” Tall Open Sides on Hybrid Model

      Increases from standard 24” open sides to 36” open sides. Ramp gate folds and has the added spring assist.

      Increases from standard 24” open sides to 36” open sides. Ramp gate folds and has the added spring assist.

      $449.00

      (Deposit: $449.00)
      Add to Cart

      Double Rear Barn Doors on Enclosed Box on Hybrid Model

      Add double rear door access to enclosed box area from hybrid deck.

      Add double rear door access to enclosed box area from hybrid deck.

      $425.00

      (Deposit: $425.00)
      Add to Cart

      Expanded Metal (Mesh) Added to Standard 24” Open Sides on Any Hybrid Model ($26 per foot of open deck length)

      Choose this option to add expanded wire mesh on the standard open 24” rails on a hybrid conversion. Price is per foot of hybrid deck. Add to cart then update cart to number of feet of open rear deck you are purchasing.

      Choose this option to add expanded wire mesh on the standard open 24” rails on a hybrid conversion. Price is per foot of hybrid deck. Add to cart then update cart to number of feet of open rear deck you are purchasing.

      $26.00

      (Deposit: $26.00)
      Add to Cart

      Expanded Metal (Mesh) Covered Taller 36” Sides on Any Hybrid Model ($35 per foot of open deck length)

      Choose this option to increase to 36” tall sides and with expanded wire mesh on 36” tall rails on a hybrid conversion. Price is per foot of hybrid deck. Add to cart then update cart to number of feet of open rear deck you are purchasing.

      Choose this option to increase to 36” tall sides and with expanded wire mesh on 36” tall rails on a hybrid conversion. Price is per foot of hybrid deck. Add to cart then update cart to number of feet of open rear deck you are purchasing.

      $35.00

      (Deposit: $35.00)
      Add to Cart

      Hybrid Rear Open Deck Conversion ($20 Per Foot of Open Deck) *Shown w/other available options

      Shown in picture with optional upgrade to wire mesh sides and double rear barn doors. Chose this to CONVERT the rear of a standard 7' or 8.5' wide model to an open rear deck. Price includes: 4' tall rear ramp gate, 24” tall open side rails, treated 2x6 deck floor. Price is per foot times the length you want your open deck. Example: 8.5x20' trailer with 12' open rear deck will have 8' enclosed front box and 12' open rear deck. Add to cart then change quantity in cart to how long you want your open deck. This only converts length to open deck, does NOT add any trailer length.

      Shown in picture with optional upgrade to wire mesh sides and double rear barn doors. Chose this to CONVERT the rear of a standard 7' or 8.5' wide model to an open rear deck. Price includes: 4' tall rear ramp gate, 24” tall open side rails, treated 2x6 deck floor. Price is per foot times the length you want your open deck. Example: 8.5x20' trailer with 12' open rear deck will have 8' enclosed front box and 12' open rear deck. Add to cart then change quantity in cart to how long you want your open deck. This only converts length to open deck, does NOT add any trailer length.

      $20.00

      (Deposit: $20.00)
      Add to Cart

      Porch Floor Upgraded to 1/8” Steel ILO Standard ATP Covered Plywood ($110 per foot of porch)

      This upgrades to an all steel floor deck from the standard ATP  covered plywood deck that comes included in the porch conversion price. Add as many feet of steel floor into your cart to match the number of feet you selected for your porch length.

      This upgrades to an all steel floor deck from the standard ATP  covered plywood deck that comes included in the porch conversion price. Add as many feet of steel floor into your cart to match the number of feet you selected for your porch length.

      $110.00

      (Deposit: $110.00)
      Add to Cart

      Rear Porch-Convert Trailer Length to Any Size Porch ($140 per foot of porch)

      This option will CONVERT the rear section of any 7' or 8.5 wide model to a covered rear porch. Price includes: Your choice of 36” tall open side rails, or half wall covered in matching exterior metal, ATP covering over standard plywood floor. Price is per foot x the length you want your porch. This only converts length to a porch, does NOT add any length to your trailer. Add to cart, then update cart to the number of feet length you want your rear porch. Example: 8.5 x 20' trailer, with 8' porch purchase. Enclosed box will be 12' and porch will be 8'

      This option will CONVERT the rear section of any 7' or 8.5 wide model to a covered rear porch. Price includes: Your choice of 36” tall open side rails, or half wall covered in matching exterior metal, ATP covering over standard plywood floor. Price is per foot x the length you want your porch. This only converts length to a porch, does NOT add any length to your trailer. Add to cart, then update cart to the number of feet length you want your rear porch. Example: 8.5 x 20' trailer, with 8' porch purchase. Enclosed box will be 12' and porch will be 8'

      $0.00

      (Deposit: $0.00)
      Add to Cart
    • Access Door 24” x 24”

      Add on any model at your location choice.

      Add on any model at your location choice.

      $199.00

      (Deposit: $199.00)
      Add to Cart

      Baggage Door 36” x 36”

      Add on any model at your location choice.

      Add on any model at your location choice.

      $229.00

      (Deposit: $229.00)
      Add to Cart

      Cable/Fuel Door 12” x 12”

      Add on any model at your location choice.

      Add on any model at your location choice.

      $159.00

      (Deposit: $159.00)
      Add to Cart

      Cooler Insulated Compartment w/Tray, Slides, Solid Door

      Add on any model.

      Add on any model.

      $850.00

      (Deposit: $850.00)
      Add to Cart

      Generator Door 36” x 36” (Non-vented)

      Add on any model at your location choice.

      Add on any model at your location choice.

      $229.00

      (Deposit: $229.00)
      Add to Cart

      Generator Door 36” x 36” (Vented)

      Add on any model at your location choice. Door is approximately 36” x 36”

      Add on any model at your location choice. Door is approximately 36” x 36”

      $329.00

      (Deposit: $329.00)
      Add to Cart

      Generator Inside Slide-out Tray w/Slides (Fits 36” Wide Inside Generator Storage Box)

      If you are purchasing the generator inside storage box separately, choose this if you want o add a slide-out tray for your generator to be mounted on.

      If you are purchasing the generator inside storage box separately, choose this if you want o add a slide-out tray for your generator to be mounted on.

      $219.00

      (Deposit: $219.00)
      Add to Cart

      Generator Platform Mounted on 60” Extended Triple Tube Tongue-Covered in ATP (Flat Front Models)

      Yhis is a platform available only on flat front models. Select flat front option separately or if you choose this option your trailer will automatically switch to a flat front to accommodate platform..

      Yhis is a platform available only on flat front models. Select flat front option separately or if you choose this option your trailer will automatically switch to a flat front to accommodate platform..

      $550.00

      (Deposit: $550.00)
      Add to Cart

      Generator Protruding Storage Box in Front-1/2 Inside-1/2 Outside w/Slider Tray

      Stores generator on a slider tray and is half in and half out of trailer front.

      Stores generator on a slider tray and is half in and half out of trailer front.

      $995.00

      (Deposit: $995.00)
      Add to Cart

      Generator Storage Box Inside Trailer w/36” Vented Generator Door (36” High x 36” Wide x 36” Deep)

      Note: Net opening about 34” x 34”. For generator storage only, cannot run a generator when inside box. Normally installed near front of trailer on driver side. Can be placed at your location choice. Must add generator slider tray separately if desired, to mount your generator on and slide-out to run generator.

      Note: Net opening about 34” x 34”. For generator storage only, cannot run a generator when inside box. Normally installed near front of trailer on driver side. Can be placed at your location choice. Must add generator slider tray separately if desired, to mount your generator on and slide-out to run generator.

      $779.00

      (Deposit: $779.00)
      Add to Cart

      Generator Storage Box on Front Tongue (36”x36”) Requires Flat Front & Extended Tongue Options

      ATP covered storage box for your generator. Mounted on front tongue and you must switch to a flat front (no V-nose) and add an extended tongue option to have room on the tongue area.

      ATP covered storage box for your generator. Mounted on front tongue and you must switch to a flat front (no V-nose) and add an extended tongue option to have room on the tongue area.

      $675.00

      (Deposit: $675.00)
      Add to Cart

      Gull Wing Lift Up Awning Door on Side-Any Model (Price Per Foot of Door Width)

      Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

      Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

      $140.00

      (Deposit: $140.00)
      Add to Cart

      Vent Panel-Louvered (Stationary) 24”x24”

      Can be placed in a side door or in the side wall at your specified location.

      Can be placed in a side door or in the side wall at your specified location.

      $135.00

      (Deposit: $135.00)
      Add to Cart

      Vent Panel-Louvered (Stationary) 36”x36”

      Can be placed in the side wall at your specified location.

      Can be placed in the side wall at your specified location.

      $175.00

      (Deposit: $175.00)
      Add to Cart
    • 36” Wide Ramp Door In the Front V-Nose

      Add in V-nose normally on curbside, on any V-nose model.

      Add in V-nose normally on curbside, on any V-nose model.

      $500.00

      (Deposit: $500.00)
      Add to Cart

      36” Wide Side Ramp Door

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      $490.00

      (Deposit: $490.00)
      Add to Cart

      48” Wide Ramp Door In the Front V-Nose w/15” Extended Triple Tube Tongue & V-Nose

      Add in V-nose normally on curbside, on any V-nose model. Also includes the required 15” triple tube tongue & V-nose.

      Add in V-nose normally on curbside, on any V-nose model. Also includes the required 15” triple tube tongue & V-nose.

      $699.00

      (Deposit: $699.00)
      Add to Cart

      48” Wide Side Ramp Door

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      $600.00

      (Deposit: $600.00)
      Add to Cart

      60” Wide Ramp Door In the Front V-Nose w/15” Extended Triple Tube Tongue & V-Nose

      Add in V-nose normally on curbside, on any V-nose model. Also includes the required 15” extended triple tube tongue & V-nose.

      Add in V-nose normally on curbside, on any V-nose model. Also includes the required 15” extended triple tube tongue & V-nose.

      $825.00

      (Deposit: $825.00)
      Add to Cart

      60” Wide Side Ramp Door

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      $725.00

      (Deposit: $725.00)
      Add to Cart

      72” Wide Side Ramp Door

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      Add on side of any trailer provided trailer length will accommodate your chosen location.

      $850.00

      (Deposit: $850.00)
      Add to Cart

      Aluminum Tread Plate (ATP) Covering on Any Rear Ramp Door & Flap

      Covers any plywood ramp door and flap in aluminum tread plate (ATP).

      Covers any plywood ramp door and flap in aluminum tread plate (ATP).

      $250.00

      (Deposit: $250.00)
      Add to Cart

      ATP Covering on Standard 16” Plywood Ramp Door Flap Only

      Add ATP covering just on the standard 16” ramp door flap.

      Add ATP covering just on the standard 16” ramp door flap.

      $45.00

      (Deposit: $45.00)
      Add to Cart

      Barn Swing Rear Doors ILO Ramp Door-Any Size-(Change Fee)

      Choose this change option if you want double rear swing barn doors instead of the standard ramp rear door on any size. Also will delete the no-show beavertail floor on all 8.5 wide models. (photo for illustration purposes only)

      Choose this change option if you want double rear swing barn doors instead of the standard ramp rear door on any size. Also will delete the no-show beavertail floor on all 8.5 wide models. (photo for illustration purposes only)

      $20.00

      (Deposit: $20.00)
      Add to Cart

      Double Spring Assist on Rear Ramp Door (required on any ramp door over 7'6” tall)

      Adds a second spring and assists in raising or lowering rear ramp door.

      Adds a second spring and assists in raising or lowering rear ramp door.

      $199.00

      (Deposit: $199.00)
      Add to Cart

      Escape Door (Blackout Frame) 54” x 48” w/Bar Lock (used with a blackout trailer)

      If purchasing blackout package separately, this is the escape door option to add. Normally used on 8.5 wide car hauler models and mounted over fenders on driver side for easy side exit.

      If purchasing blackout package separately, this is the escape door option to add. Normally used on 8.5 wide car hauler models and mounted over fenders on driver side for easy side exit.

      $449.00

      (Deposit: $449.00)
      Add to Cart

      Escape Door 54” x 48” w/Bar Lock

      Normally used on 8.5 wide car hauler models and mounted over fenders on driver side for easy side exit.

      Normally used on 8.5 wide car hauler models and mounted over fenders on driver side for easy side exit.

      $399.00

      (Deposit: $399.00)
      Add to Cart

      Gull Wing Lift Up Awning Door on Side-Any Model (Price Per Foot of Door Width)

      Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

      Can be added on side of any model at your location choice(s). You choose width, door goes from the floor to ceiling level on any height model. Price is per foot x width of the door size you choose, by adding the number of feet in the shopping cart. Example: You want a 6' wide door, add to cart and change quantity in cart to 6.

      $140.00

      (Deposit: $140.00)
      Add to Cart

      Ramp Door & Flap Covered in ATP-Any Size Ramp Door

      Covers any ramp door and the flap end in aluminum tread plate.

      Covers any ramp door and the flap end in aluminum tread plate.

      $250.00

      (Deposit: $250.00)
      Add to Cart

      Ramp Door & Flap Covered in Black Rubber Tread Plate-Any Size Ramp Door

      Covers any ramp door and the flap end in black rubber tread plate.

      Covers any ramp door and the flap end in black rubber tread plate.

      $235.00

      (Deposit: $235.00)
      Add to Cart

      Rubber Tread Plate (Black) Covering on Any Rear Ramp Door & Flap

      Covers any plywood ramp door and flap in RTP.

      Covers any plywood ramp door and flap in RTP.

      $275.00

      (Deposit: $275.00)
      Add to Cart

      Side Added 32” x 66” RV Type Door w/Window and Full Screen Door (Fits 6' & 7' Wide Models)

      This adds a camper RV type door with a window in door and a full screen door. Can be placed at your location choice in any 6' or 7' wide trailer side.

      This adds a camper RV type door with a window in door and a full screen door. Can be placed at your location choice in any 6' or 7' wide trailer side.

      $699.00

      (Deposit: $699.00)
      Add to Cart

      Side Added 36” x 78” RV Type Door w/Window and Full Screen Door (Fits 8.5' Wide Models)

      This adds a camper RV type door with a window in door and a full screen door. Can be placed at your location choice in any 8.5 wide trailer side. (or a 6' or 7' wide model with height added to at least 81” inside height)

      This adds a camper RV type door with a window in door and a full screen door. Can be placed at your location choice in any 8.5 wide trailer side. (or a 6' or 7' wide model with height added to at least 81” inside height)

      $799.00

      (Deposit: $799.00)
      Add to Cart

      Side Door Added-24” x 78” w/Bar Lock

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      $150.00

      (Deposit: $150.00)
      Add to Cart

      Side Door Added-32” x 70” w/Flush Key Lock

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      $270.00

      (Deposit: $270.00)
      Add to Cart

      Side Door Added-32” x 78” w/Flush Key Lock

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      $295.00

      (Deposit: $295.00)
      Add to Cart

      Side Door Added-36” x 70” w/Flush Key Lock

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      $325.00

      (Deposit: $325.00)
      Add to Cart

      Side Door Added-36” x 78” w/Flush Key Lock

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      $350.00

      (Deposit: $350.00)
      Add to Cart

      Side Door Added-48” x 78” w/Flush Key Lock

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      Adds additional side door in your choice side location. Requires trailer with enough inside height.

      $395.00

      (Deposit: $395.00)
      Add to Cart

      Side Door Moved Into V-Nose Front

      This will move any standard side door from side of trailer into the curbside front V-nose.

      This will move any standard side door from side of trailer into the curbside front V-nose.

      $40.00

      (Deposit: $40.00)
      Add to Cart

      Side Door Pull-out RV Style Door Step

      Can be added under any side door. Mounted in frame under side door. Manually pulled in and out.

      Can be added under any side door. Mounted in frame under side door. Manually pulled in and out.

      $259.00

      (Deposit: $259.00)
      Add to Cart

      Side Double Door Added-60” x 78”

      Adds additional side double doors in your choice side location. Requires trailer with enough inside height and length to accommodate door.

      Adds additional side double doors in your choice side location. Requires trailer with enough inside height and length to accommodate door.

      $750.00

      (Deposit: $750.00)
      Add to Cart

      Steel 1/8”Tread Plate In Lieu of Plywood on Any Rear Ramp Door & Flap

      Converts any width model with a ramp door from plywood ramp rear door with plywood ground end flap, to 1/8” steel tread plate on ramp door with steel flap on ground end. (NOTE: steel transition flap over hinges must be purchased separately if desired).

      Converts any width model with a ramp door from plywood ramp rear door with plywood ground end flap, to 1/8” steel tread plate on ramp door with steel flap on ground end. (NOTE: steel transition flap over hinges must be purchased separately if desired).

      $975.00

      (Deposit: $975.00)
      Add to Cart

      Transition Flap (Steel) Ramp Door onto Floor

      Add on any ramp rear door model to cover the hinge open space area between door and trailer floor for easier crossover.

      Add on any ramp rear door model to cover the hinge open space area between door and trailer floor for easier crossover.

      $149.00

      (Deposit: $149.00)
      Add to Cart

      Transition Flap-Aluminum Tread Plate (ATP) Ramp Door onto Floor

      Add on any ramp rear door model to cover the hinge open space area between door and trailer floor for easier crossover.

      Add on any ramp rear door model to cover the hinge open space area between door and trailer floor for easier crossover.

      $100.00

      (Deposit: $100.00)
      Add to Cart

      Upgrade 6' or 7' Wide to HD Ramp Door (4500# Capacity)

      Choose this to upgrade from the standard 2000# capacity ramp rear door. Note: This HD door comes standard on 8.5 wide models.

      Choose this to upgrade from the standard 2000# capacity ramp rear door. Note: This HD door comes standard on 8.5 wide models.

      $325.00

      (Deposit: $325.00)
      Add to Cart

      Upgrade 8.5 Wide to Super Duty Ramp Rear Door (6000# Capacity) To Max 8'6 Tall Door Height

      Choose this to upgrade from the standard HD (4500#) capacity ramp rear door. Includes: 2x6 tubing, 1/4” angle, double spring assist, pads. When adding additional height to trailer, this super duty door height can only go up to 8'6” tall max.

      Choose this to upgrade from the standard HD (4500#) capacity ramp rear door. Includes: 2x6 tubing, 1/4” angle, double spring assist, pads. When adding additional height to trailer, this super duty door height can only go up to 8'6” tall max.

      $550.00

      (Deposit: $550.00)
      Add to Cart

      Upgrade Any Width Side Door to 48” Side Ramp Door

      Converts any standard side door to a 48” wide ramp door. Must be sure you have ample room in front of fenders on side.

      Converts any standard side door to a 48” wide ramp door. Must be sure you have ample room in front of fenders on side.

      $475.00

      (Deposit: $475.00)
      Add to Cart

      Upgrade Any Width Side Door to 60” Side Ramp Door

      Converts any standard side door to a 48” wide ramp door. Must have ample room in front of fenders for door width to fit.

      Converts any standard side door to a 48” wide ramp door. Must have ample room in front of fenders for door width to fit.

      $595.00

      (Deposit: $595.00)
      Add to Cart

      Upgrade Standard 32” Side Door (6' or 7' Wide Models) to 32” x 66” RV Door w/Window and Full Screen Door

      This upgrades to a camper RV door with a window in door and a full screen door.

      This upgrades to a camper RV door with a window in door and a full screen door.

      $450.00

      (Deposit: $450.00)
      Add to Cart

      Upgrade Standard 32” Side Door to 36” (6' or 7' Wide Models)

      Upgrades door width

      Upgrades door width

      $99.00

      (Deposit: $99.00)
      Add to Cart

      Upgrade Standard 32” Side Door to 48” (6' or 7' Wide Models)

      Upgrades door width. Must have ample room on side in front of fenders.

      Upgrades door width. Must have ample room on side in front of fenders.

      $195.00

      (Deposit: $195.00)
      Add to Cart

      Upgrade Standard 36” Side Door (8.5 Wide Models) to 36” x 78” RV Door w/Window and Full Screen Door

      This upgrades to a camper type RV door with a window in door and a full screen door.

      This upgrades to a camper type RV door with a window in door and a full screen door.

      $525.00

      (Deposit: $525.00)
      Add to Cart

      Upgrade Standard 36” Side Door to 48” (8.5 Wide Models)

      Upgrades door width. Must have ample room on side in front of fenders.

      Upgrades door width. Must have ample room on side in front of fenders.

      $100.00

      (Deposit: $100.00)
      Add to Cart

      Upgrade Standard 36” Side Door to 48” DOUBLE Side Door (8.5 Wide Models)

      Upgrades door width and from single to double door. Must have ample room on side in front of fenders.

      Upgrades door width and from single to double door. Must have ample room on side in front of fenders.

      $499.00

      (Deposit: $499.00)
      Add to Cart

      Upgrade Standard 36” Side Door to 60” DOUBLE Side Door (8.5 Wide Models)

      Upgrades door width and from single to double door. Must have ample room on side in front of fenders.

      Upgrades door width and from single to double door. Must have ample room on side in front of fenders.

      $599.00

      (Deposit: $599.00)
      Add to Cart

      Upgrade to Longer 36” Plywood Flap & Covered in ATP on Ramp Door w/Wedges & Big Bumpers

      Upgrades from standard 16” plywood flap on ramp door to 36” plywood flap and covered in aluminum treadplate.

      Upgrades from standard 16” plywood flap on ramp door to 36” plywood flap and covered in aluminum treadplate.

      $325.00

      (Deposit: $325.00)
      Add to Cart

      Upgrade to Longer 36” Plywood Flap on Ramp Door w/Wedges & Big Bumpers

      Upgrades from standard 16” plywood flap on ramp door

      Upgrades from standard 16” plywood flap on ramp door

      $200.00

      (Deposit: $200.00)
      Add to Cart

      Wider Opening Rear Ramp Door on 8.5 Wide Models w/Slimline LED Lights & Twist Door Locks

      Available on 8.5 wide models. This adds the most possible width opening on any 8.5 model rear ramp door.

      Available on 8.5 wide models. This adds the most possible width opening on any 8.5 model rear ramp door.

      $450.00

      (Deposit: $450.00)
      Add to Cart
    • 100 AMP ”Jumbo” Electrical Package

      Required for models adding larger amounts of electrical items, 220 outlets, dedicated breaker service, etc. Includes: (2)-standard interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 100 AMP panel box service (30 slots each side same size panel box as in a residence), inverter, heavier AMP lifeline cord.

      Required for models adding larger amounts of electrical items, 220 outlets, dedicated breaker service, etc. Includes: (2)-standard interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 100 AMP panel box service (30 slots each side same size panel box as in a residence), inverter, heavier AMP lifeline cord.

      $1,599.00

      (Deposit: $1,599.00)
      Add to Cart

      100 AMP Basic Electrical Package

      Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 100 AMP panel box service, (10 slots each side) inverter, 50 AMP lifeline cord.

      Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 100 AMP panel box service, (10 slots each side) inverter, 50 AMP lifeline cord.

      $1,199.00

      (Deposit: $1,199.00)
      Add to Cart

      30 AMP Basic Electrical Package

      Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 30 AMP panel box service, inverter, 30 AMP lifeline cord.

      Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 30 AMP panel box service, inverter, 30 AMP lifeline cord.

      $799.00

      (Deposit: $799.00)
      Add to Cart

      50 AMP Basic Electrical Package

      Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 50 AMP panel box service, inverter, 50 AMP lifeline cord.

      Includes: (2)-interior wall receptacles, (1)-110V switch, (2) 12V-12” x 48” LED lights, 50 AMP panel box service, inverter, 50 AMP lifeline cord.

      $899.00

      (Deposit: $899.00)
      Add to Cart
    • 110V 20 AMP Wall Receptacle (ea)

      Adds extra 110V wall outlet.

      Adds extra 110V wall outlet.

      $25.00

      (Deposit: $25.00)
      Add to Cart

      110V GFI 20 AMP Receptacle (Interior or Exterior)

      Adds a GFI outlet.

      Adds a GFI outlet.

      $45.00

      (Deposit: $45.00)
      Add to Cart

      110V Stub-out w/Switch (For After-market use)

      If purchasing a 110V electrical package with panel box, and you need a wire stub ran to a point in the trailer for your after-market install of an electrical item, add this stub with a wall switch.

      If purchasing a 110V electrical package with panel box, and you need a wire stub ran to a point in the trailer for your after-market install of an electrical item, add this stub with a wall switch.

      $90.00

      (Deposit: $90.00)
      Add to Cart

      12V Battery ”On Board” 12V Power-In a Box (vented)

      Choose this to have all your 12v items wired to 12v on board battery power.

      Choose this to have all your 12v items wired to 12v on board battery power.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      12V Exterior Marker Light-Extra Red or Amber (ea ) Minimum 2

      Must order in pairs (takes one marker light on each side). Add to cart then update quantity in cart to even numbers (Example 2,4,6) Specify red or amber in your checkout notes. Add as many extra lights as you want.

      Must order in pairs (takes one marker light on each side). Add to cart then update quantity in cart to even numbers (Example 2,4,6) Specify red or amber in your checkout notes. Add as many extra lights as you want.

      $15.00

      (Deposit: $15.00)
      Add to Cart

      12V Inside LED Dome Light (each)

      All trailers come standard with one 12V inside dome light. Add as many extra dome lights as you desire. Normally they will be evenly spaced in trailer unless otherwise specified.

      All trailers come standard with one 12V inside dome light. Add as many extra dome lights as you desire. Normally they will be evenly spaced in trailer unless otherwise specified.

      $40.00

      (Deposit: $40.00)
      Add to Cart

      12V Interior Wall Switch for 12V Lights (each)

      Additional wall light switch for any 12V lights.

      Additional wall light switch for any 12V lights.

      $15.00

      (Deposit: $15.00)
      Add to Cart

      12V LED 24” Exterior Racing Light w/Switch (ea)

      For exterior wall mount. Your choice location on any side. Includes a switch. Multiple lights will all be on one switch.

      For exterior wall mount. Your choice location on any side. Includes a switch. Multiple lights will all be on one switch.

      $195.00

      (Deposit: $195.00)
      Add to Cart

      220V Interior Receptacle (Requires Minimum 50 AMP Panel Box Service)

      Must send picture of your 220 plug configuration or the most common will be installed. Receptacle on an included double pole 30 AMP dedicated breaker.

      Must send picture of your 220 plug configuration or the most common will be installed. Receptacle on an included double pole 30 AMP dedicated breaker.

      $175.00

      (Deposit: $175.00)
      Add to Cart

      30 AMP Motorbase Exterior Plug w/Twist-Lock Cord ILO of Standard Lifeline Floor Drop Cord

      Choose this to switch to a a loose twist-lock cord to supply power through an exterior motor base plug instead of the standard inside drop lifeline cord.

      Choose this to switch to a a loose twist-lock cord to supply power through an exterior motor base plug instead of the standard inside drop lifeline cord.

      $149.00

      (Deposit: $149.00)
      Add to Cart

      48” 12V Interior LED Light (each)

      Choose this to add extra inside 12V 48” strip light. Price per each light.

      Choose this to add extra inside 12V 48” strip light. Price per each light.

      $75.00

      (Deposit: $75.00)
      Add to Cart

      50 AMP Motor Base Exterior Plug w/Twist-Lock Cord ILO of Standard Lifeline Floor Drop Cord

      Choose this to switch to a a loose twist-lock cord to supply power through an exterior motor base plug instead of the standard inside drop lifeline cord.

      Choose this to switch to a a loose twist-lock cord to supply power through an exterior motor base plug instead of the standard inside drop lifeline cord.

      $179.00

      (Deposit: $179.00)
      Add to Cart

      7-Way Round Light Plug & Harness UPGRADE from Standard Flat 4-Pin Plug

      If adding back-up lights to a single axle trailer with no brakes, this plug is required. Single axle no brake trailers come with only a flat 4-pin light plug. This upgrades any single axle trailer from a flat 4-pin plug to the 7-way round plug and harness standard on trailers that have electric brakes.

      If adding back-up lights to a single axle trailer with no brakes, this plug is required. Single axle no brake trailers come with only a flat 4-pin light plug. This upgrades any single axle trailer from a flat 4-pin plug to the 7-way round plug and harness standard on trailers that have electric brakes.

      $30.00

      (Deposit: $30.00)
      Add to Cart

      72” 12V Interior LED Light (each)

      Choose this to add extra inside 12V light 72” long. Price per each light.

      Choose this to add extra inside 12V light 72” long. Price per each light.

      $95.00

      (Deposit: $95.00)
      Add to Cart

      Back-up (Reverse) 12V LED Lights (Requires 7-Way Light Plug Harness)

      If adding to a single axle no brake trailer, must also purchase the 7-way plug upgrade separately for back-up light functionality.

      If adding to a single axle no brake trailer, must also purchase the 7-way plug upgrade separately for back-up light functionality.

      $60.00

      (Deposit: $60.00)
      Add to Cart

      Dedicated 20 AMP Breaker in Electrical Service Panel Box (each)

      If you are also purchasing a breaker panel box or electrical package with a panel box,  and you want a breaker in the panel box dedicated to one electrical outlet, add this option and specify in your checkout notes what you want on the dedicated service breaker. Does NOT include any outlet which must be purchased separately if desired.

      If you are also purchasing a breaker panel box or electrical package with a panel box,  and you want a breaker in the panel box dedicated to one electrical outlet, add this option and specify in your checkout notes what you want on the dedicated service breaker. Does NOT include any outlet which must be purchased separately if desired.

      $50.00

      (Deposit: $50.00)
      Add to Cart

      Dual LED 12V Tail Lights (pair)

      Add on any model to have a double set of tail lights.

      Add on any model to have a double set of tail lights.

      $65.00

      (Deposit: $65.00)
      Add to Cart

      Exterior 12V LED Light w/Switch (porch light by side door)

      Add to any trailer. Normally mounted outside by side door.

      Add to any trailer. Normally mounted outside by side door.

      $69.00

      (Deposit: $69.00)
      Add to Cart

      Exterior 12V LED Rear Load Light (each)

      Price per each light. Most buyers want at least two.

      Price per each light. Most buyers want at least two.

      $60.00

      (Deposit: $60.00)
      Add to Cart

      Motor Base 15 AMP 3-Prong 110V Exterior Plug w/One Inside Wall Receptacle

      This is a standard 3-prong motor base plug on the outside of your trailer, used to connect your standard extension cord (cord not included) from a 110V power source.  (generator, power supply at a campground,  from your truck inverter if equipped, etc). Feeds 110V power to the inside wall outlet to give you 110V electric power in the outlet.

      This is a standard 3-prong motor base plug on the outside of your trailer, used to connect your standard extension cord (cord not included) from a 110V power source.  (generator, power supply at a campground,  from your truck inverter if equipped, etc). Feeds 110V power to the inside wall outlet to give you 110V electric power in the outlet.

      $150.00

      (Deposit: $150.00)
      Add to Cart

      Side 12V Blinker Lights (also called mid-ship turn lights)

      Add on any model.

      Add on any model.

      $59.00

      (Deposit: $59.00)
      Add to Cart

      Upgrade Electrical Wiring to Heavier 12/2 Wire (required on heavy concession options models)

      The factory may require you to purchase this upgrade if your amount of electrical service components need the heavier wire. Upgrades from standard size wiring to heavier 12/2 wiring on entire electrical install.

      The factory may require you to purchase this upgrade if your amount of electrical service components need the heavier wire. Upgrades from standard size wiring to heavier 12/2 wiring on entire electrical install.

      $400.00

      (Deposit: $400.00)
      Add to Cart

      UPGRADE the Standard 12V Inside Dome Light to 12V LED 48” Strip Light

      All models come with one 12V inside dome light. Choose this option if you want to upgrade from the free dome light to a 48” LED strip light.

      All models come with one 12V inside dome light. Choose this option if you want to upgrade from the free dome light to a 48” LED strip light.

      $60.00

      (Deposit: $60.00)
      Add to Cart

      Wall Receptacle Wired on Separate Breaker (per each recept)

      If you desire any standard wall receptacle to be wired on a separate individual breaker, add this option for each one you want on a separate breaker .

      If you desire any standard wall receptacle to be wired on a separate individual breaker, add this option for each one you want on a separate breaker .

      $25.00

      (Deposit: $25.00)
      Add to Cart
    • Aluminum BLACK Tread Plate (ATP) 24” Tall Aluminum Sides & Rear ($20 PLF)

      Adds 24” tall BLACK aluminum tread plate (ATP), around the sides and rear. Price calculated per linear foot x length of any width model.

      Adds 24” tall BLACK aluminum tread plate (ATP), around the sides and rear. Price calculated per linear foot x length of any width model.

      $760.00

      (Deposit: $760)
      Add to Cart

      Aluminum Colored Metal 24” Tall Sides & Rear ($18 PLF)

      24” tall aluminum colored metal around the sides and rear. Request color choice to check availability. Price calculated per linear foot x length of any width model.

      24” tall aluminum colored metal around the sides and rear. Request color choice to check availability. Price calculated per linear foot x length of any width model.

      $684.00

      (Deposit: $684)
      Add to Cart

      Aluminum Tread Plate (ATP) 24” Tall Aluminum Sides & Rear ($16 PLF)

      Adds 24” tall aluminum tread plate (ATP) same as the front rock guard, around the sides and rear. Price calculated per linear foot x length of any width model.

      Adds 24” tall aluminum tread plate (ATP) same as the front rock guard, around the sides and rear. Price calculated per linear foot x length of any width model.

      $608.00

      (Deposit: $608)
      Add to Cart

      Anodized (smooth) 24” Tall Aluminum Sides & Rear ($15 PLF)

      Adds 24” tall smooth anodized aluminum around the sides and rear. Price calculated per linear foot x length of any width model.

      Adds 24” tall smooth anodized aluminum around the sides and rear. Price calculated per linear foot x length of any width model.

      $570.00

      (Deposit: $570)
      Add to Cart

      Black .040 Exterior Metal Upgrade ($40 PLF)

      Upgrade from standard free .024 thickness white to .040 thickness BLACK exterior metal. Price calculated per linear foot x  length of any width model.

      Upgrade from standard free .024 thickness white to .040 thickness BLACK exterior metal. Price calculated per linear foot x  length of any width model.

      $1,520.00

      (Deposit: $1520)
      Add to Cart

      BLACK Fenders-UPGRADE on Any Size Trailer-ILO Standard Aluminum Fenders (pair)

      If you want black fenders instead of the standard aluminum finish fenders on any size trailer, add this option to upgrade both fenders.

      If you want black fenders instead of the standard aluminum finish fenders on any size trailer, add this option to upgrade both fenders.

      $125.00

      (Deposit: $125.00)
      Add to Cart

      Black Steel Modular Wheels (UPGRADE) ILO Standard Silver Modular Wheels ($10 per each wheel)

      Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

      Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

      $10.00

      (Deposit: $10.00)
      Add to Cart

      Blackout Exterior Trim w/Any Exterior Color Choice ($16 PLF)

      This will change the following trim only to black: All bottom and top trim, side door trim and the bar lock and hasp, front ATP stone guard and vertical nose plate. DOES NOT CHANGE FENDERS (standard aluminum) OR WHEELS TO BLACK (from standard silver mod wheel). MUST  PURCASE black fenders and/or black steel modular wheels options separately if desired. If ordering concession door, must add black trim on concession door separately if desired.

      This will change the following trim only to black: All bottom and top trim, side door trim and the bar lock and hasp, front ATP stone guard and vertical nose plate. DOES NOT CHANGE FENDERS (standard aluminum) OR WHEELS TO BLACK (from standard silver mod wheel). MUST  PURCASE black fenders and/or black steel modular wheels options separately if desired. If ordering concession door, must add black trim on concession door separately if desired.

      $608.00

      (Deposit: $608)
      Add to Cart

      Brite Dip Aluminum Front Header Cap w/Cast Corners (7'or 8.5' Wide Models Only)

      Only available on 7' wide and 8.5 wide models with the flat front.

      Only available on 7' wide and 8.5 wide models with the flat front.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      Rear Spoiler w/ Two 12V Flood Lights (reduces rear door opening height by 12”) Extra Trailer Height Recommended.

      Adds extended on top rear of any width model. Will reduce rear door opening height by 12”, so if you want the door height to stay normal, add 12” extra trailer height. (recommended)

      Adds extended on top rear of any width model. Will reduce rear door opening height by 12”, so if you want the door height to stay normal, add 12” extra trailer height. (recommended)

      $499.00

      (Deposit: $499.00)
      Add to Cart

      Screwless Metal Exterior ($15 PLF)

      Metal is not screwed on sides but adhered to all wall posts by hi-tech adhesive. Can be selected for use on any standard .024 or .030 metal EXCEPT BLACK. (Not available on PolyMetal or .040 metal). Price is calculated per linear foot x length of any width model.

      Metal is not screwed on sides but adhered to all wall posts by hi-tech adhesive. Can be selected for use on any standard .024 or .030 metal EXCEPT BLACK. (Not available on PolyMetal or .040 metal). Price is calculated per linear foot x length of any width model.

      $570.00

      (Deposit: $570)
      Add to Cart

      Semi-Screwless Metal Exterior ($10 PLF)

      Metal is screwed at joints and adhered to all other wall posts by hi-tech adhesive. Can be selected for use on any standard .024 or .030 metal. (Not available on PolyMetal or .040 metal). Price is calculated per linear foot x length of any width model.

      Metal is screwed at joints and adhered to all other wall posts by hi-tech adhesive. Can be selected for use on any standard .024 or .030 metal. (Not available on PolyMetal or .040 metal). Price is calculated per linear foot x length of any width model.

      $380.00

      (Deposit: $380)
      Add to Cart

      Upgrade Any Width Trailer to .080 PolyMetal Core Backed Aluminum ($28 PLF) Limited Colors Available

      This is the patented PolyMetal product used extensively in the sign industry. It's aluminum metal adhered on a hard poly core backing with a total thickness of .080 and gives the smoothest exterior looking finish. Available only in the following color choices: Orange, Yellow, Bright Green, Silver Frost, Black, Charcoal Gray, White, Red, Bright Blue, Champagne. Add this item to your cart and then SPECIFY your color choice at checkout in the ”checkout notes” section. Price is calculated at per linear foot x trailer length on any width model.

      This is the patented PolyMetal product used extensively in the sign industry. It's aluminum metal adhered on a hard poly core backing with a total thickness of .080 and gives the smoothest exterior looking finish. Available only in the following color choices: Orange, Yellow, Bright Green, Silver Frost, Black, Charcoal Gray, White, Red, Bright Blue, Champagne. Add this item to your cart and then SPECIFY your color choice at checkout in the ”checkout notes” section. Price is calculated at per linear foot x trailer length on any width model.

      $1,064.00

      (Deposit: $1064)
      Add to Cart

      White .040 Exterior Metal Upgrade ($35 PLF)

      Upgrade from standard free .024 thickness white to .040 thickness white exterior metal. Price calculated per linear foot x  length of any width model.

      Upgrade from standard free .024 thickness white to .040 thickness white exterior metal. Price calculated per linear foot x  length of any width model.

      $1,330.00

      (Deposit: $1330)
      Add to Cart
    • 06” Additional Height on Any Width Model ($15 PLF)

      This option adds 6” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

      This option adds 6” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

      $570.00

      (Deposit: $570)
      Add to Cart

      12” Additional Height on Any Width Model ($24 PLF)

      This option adds 12” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

      This option adds 12” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

      $912.00

      (Deposit: $912)
      Add to Cart

      18” Additional Height on Any Width Model ($35 PLF)

      This option adds 18” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

      This option adds 18” to the standard overall, inside and rear door header heights. Price is calculated per linear foot x length of trailer on any width model.

      $1,330.00

      (Deposit: $1330)
      Add to Cart

      24” Additional Height on Any Width Model ($42 PLF)

      ALSO REQUIRES ADDING DOUBLE SPRING ASSIST ON RAMP DOOR IF YOU WANT REAR DOOR HEIGHT TALLER THAN 7'6”. IF NO DOUBLE ASSIST ADDED DOOR HEIGHT WILL MAX AT 7'6” REGARDLESS OF INSIDE HEIGHT. This option adds 24” to the standard overall & inside  heights & door header height if you also purchase the double spring assist on ramp door separately. Price for extra height is calculated per linear foot x length of trailer on any width model.

      ALSO REQUIRES ADDING DOUBLE SPRING ASSIST ON RAMP DOOR IF YOU WANT REAR DOOR HEIGHT TALLER THAN 7'6”. IF NO DOUBLE ASSIST ADDED DOOR HEIGHT WILL MAX AT 7'6” REGARDLESS OF INSIDE HEIGHT. This option adds 24” to the standard overall & inside  heights & door header height if you also purchase the double spring assist on ramp door separately. Price for extra height is calculated per linear foot x length of trailer on any width model.

      $1,596.00

      (Deposit: $1596)
      Add to Cart

      Double Spring Assist on Rear Ramp Door (required on any ramp door over 7'6” tall)

      Adds a second spring and assists in raising or lowering rear ramp door.

      Adds a second spring and assists in raising or lowering rear ramp door.

      $199.00

      (Deposit: $199.00)
      Add to Cart

      REDUCE the Overall Height of Any Width Trailer ($15 PLF)

      Choose this option if you want to REDUCE the standard height of any width trailer. Will reduce overall, inside and door header heights. Price is calculated per linear foot x length of any width model. Indicate your desired OVERALL trailer height in the notes section on the checkout page. (allow for minor variance).

      Choose this option if you want to REDUCE the standard height of any width trailer. Will reduce overall, inside and door header heights. Price is calculated per linear foot x length of any width model. Indicate your desired OVERALL trailer height in the notes section on the checkout page. (allow for minor variance).

      $570.00

      (Deposit: $570)
      Add to Cart
    • ATP 18” Wide Floor Runners-Pair ($24 PLF)

      These 18” wide aluminum tread plate (ATP) runners are placed full length of trailer on top of floor, spaced where your car tires would roll over floor. Price is calculated per linear foot x length of trailer.

      These 18” wide aluminum tread plate (ATP) runners are placed full length of trailer on top of floor, spaced where your car tires would roll over floor. Price is calculated per linear foot x length of trailer.

      $912.00

      (Deposit: $912)
      Add to Cart

      ATP 24” Wide Floor Runners-Pair ($30 PLF)

      These 24” wide aluminum tread plate (ATP) runners are placed full length of trailer on top of floor, spaced where your car tires would roll over floor. Price is calculated per linear foot x length of trailer.

      These 24” wide aluminum tread plate (ATP) runners are placed full length of trailer on top of floor, spaced where your car tires would roll over floor. Price is calculated per linear foot x length of trailer.

      $1,140.00

      (Deposit: $1140)
      Add to Cart

      ATP Covered Wheel Well Ramp-Overs on 8.5 Wide Inside (15' Long x 18” Wide)

      Add this to drive vehicle up over inside wheel well boxes.

      Add this to drive vehicle up over inside wheel well boxes.

      $2,399.00

      (Deposit: $2,399.00)
      Add to Cart

      ATP Covered Wheel Well Ramp-Overs on 8.5 Wide Inside (17' Long x 18” Wide)

      Add this to drive vehicle up over inside wheel well boxes.

      Add this to drive vehicle up over inside wheel well boxes.

      $2,699.00

      (Deposit: $2,699.00)
      Add to Cart

      Ceiling Liner-(ATP) Aluminum Tread Plate ($52 PLF)

      Aluminum tread plate finished ceiling. Price calculated per linear foot x length of any width model.

      Aluminum tread plate finished ceiling. Price calculated per linear foot x length of any width model.

      $1,976.00

      (Deposit: $1976)
      Add to Cart

      Ceiling Liner-Black Metal ($42 PLF)

      Black metal finished ceiling. Price calculated per linear foot x length of any width model.

      Black metal finished ceiling. Price calculated per linear foot x length of any width model.

      $1,596.00

      (Deposit: $1596)
      Add to Cart

      Ceiling Liner-Raw Luan Plywood ($24 PLF)

      Raw Luan (thin plywood) finished ceiling. Price calculated per linear foot x length of any width model.

      Raw Luan (thin plywood) finished ceiling. Price calculated per linear foot x length of any width model.

      $912.00

      (Deposit: $912)
      Add to Cart

      Ceiling Liner-White Metal ($38 PLF)

      White metal finished ceiling. Price calculated per linear foot x length of any width model.

      White metal finished ceiling. Price calculated per linear foot x length of any width model.

      $1,444.00

      (Deposit: $1444)
      Add to Cart

      Floor Covered in Black & White Checkered Vinyl ($36 PLF)

      Available on any width model. Price calculated per linear foot x length of any width trailer.

      Available on any width model. Price calculated per linear foot x length of any width trailer.

      $1,368.00

      (Deposit: $1368)
      Add to Cart

      Floor Covered in Dark Gray Marble Vinyl ($38 PLF)

      Available on any width model. Price calculated per linear foot x length of any width trailer.

      Available on any width model. Price calculated per linear foot x length of any width trailer.

      $1,444.00

      (Deposit: $1444)
      Add to Cart

      Floor UPGRADED to 1/8” Steel Plate ILO Standard Plywood ($120 PLF)

      Upgrade from the standard 3/4” plywood floor to 1/8” steel floor. Price calculated per linear foot x length of any width model.

      Upgrade from the standard 3/4” plywood floor to 1/8” steel floor. Price calculated per linear foot x length of any width model.

      $4,560.00

      (Deposit: $4560)
      Add to Cart

      Floor UPGRADED to 3/4” Pressure Treated Plywood ILO Standard Plywood ($22 PLF)

      Upgrade the standard 3/4” plywood floor to pressure treated 3/4” plywood. Price calculated per linear foot x length of any width model.

      Upgrade the standard 3/4” plywood floor to pressure treated 3/4” plywood. Price calculated per linear foot x length of any width model.

      $836.00

      (Deposit: $836)
      Add to Cart

      Floor UPGRADED to DOUBLE 3/4” (1-1/2” thickness) Plywood ($20 PLF)

      Upgrade the standard 3/4” plywood floor to double layer of 3/4” plywood. Price calculated per linear foot x length of any width model.

      Upgrade the standard 3/4” plywood floor to double layer of 3/4” plywood. Price calculated per linear foot x length of any width model.

      $760.00

      (Deposit: $760)
      Add to Cart

      Floor UPGRADED to Steel Tread Plate ILO Standard Plywood ($140 PLF)

      Upgrade from the standard 3/4” plywood floor to steel tread plate floor. Price calculated per linear foot x length of any width model.

      Upgrade from the standard 3/4” plywood floor to steel tread plate floor. Price calculated per linear foot x length of any width model.

      $5,320.00

      (Deposit: $5320)
      Add to Cart

      Floor-Aluminum Tread Plate (ATP) HD Thicker .063 ($65 PLF)

      Floor covered in heavy duty .063 thickness ATP.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      Floor covered in heavy duty .063 thickness ATP.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      $2,470.00

      (Deposit: $2470)
      Add to Cart

      Floor-Aluminum Tread Plate (ATP) Over Floor Deck ($40 PLF)

      Floor covered in ATP.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      Floor covered in ATP.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      $1,520.00

      (Deposit: $1520)
      Add to Cart

      Floor-Black Indoor/Outdoor Carpet Over Floor Deck ($25 PLF)

      Floor covered in black indoor/outdoor carpet.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      Floor covered in black indoor/outdoor carpet.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      $950.00

      (Deposit: $950)
      Add to Cart

      Floor-Black Rubber Tread Plate Over Floor Deck ($36 PLF)

      Floor covered in black rubber tread plate.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      Floor covered in black rubber tread plate.  Available on any width model. Price calculated per linear foot x length of any width trailer.

      $1,368.00

      (Deposit: $1368)
      Add to Cart

      Insulation in Walls & Ceiling Combo-Any Width Model ($30 PLF) Requires a Ceiling Liner Purchase

      Must also purchase a ceiling liner of your choice to hold up ceiling insulation. Adds insulation in walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

      Must also purchase a ceiling liner of your choice to hold up ceiling insulation. Adds insulation in walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

      $1,140.00

      (Deposit: $1140)
      Add to Cart

      Insulation in Walls-Any Width Model ($15 PLF)

      This is bead board foam insulation sheeting, installed between plywood wall and outside metal. Price calculated per linear foot x length of any width model.

      This is bead board foam insulation sheeting, installed between plywood wall and outside metal. Price calculated per linear foot x length of any width model.

      $570.00

      (Deposit: $570)
      Add to Cart

      Kick-Plate 12” High 3/4” Plywood-Any Width Model ($10 PLF)

      12” high 3/4” plywood kick plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      12” high 3/4” plywood kick plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      $380.00

      (Deposit: $380)
      Add to Cart

      Kick-Plate 12” High Aluminum Tread Plate (ATP)-Any Width Model ($15 PLF)

      12” high aluminum tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      12” high aluminum tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      $570.00

      (Deposit: $570)
      Add to Cart

      Kick-Plate 12” High Black Rubber Tread Plate-Any Width Model ($17 PLF)

      12” high black rubber tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      12” high black rubber tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      $646.00

      (Deposit: $646)
      Add to Cart

      Kick-Plate 24” High 3/4” Plywood-Any Width Model ($18 PLF)

      24” high 3/4” plywood kick plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      24” high 3/4” plywood kick plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      $684.00

      (Deposit: $684)
      Add to Cart

      Kick-Plate 24” High Black Rubber Tread Plate-Any Width Model ($30 PLF)

      24” high black rubber tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      24” high black rubber tread plate plate installed around inside of trailer walls to add protection from equipment, etc. Price calculated per linear foot x length of trailer on any width model.

      $1,140.00

      (Deposit: $1140)
      Add to Cart

      Metal Covered (Colored) Walls & Ceiling Combo-Any Width Model ($120 PLF)

      Available in charcoal gray, red, pewter or black colored metal walls and ceiling on any width model. Specify your color choice in your checkout notes. Price calculated at per linear foot x length of trailer.

      Available in charcoal gray, red, pewter or black colored metal walls and ceiling on any width model. Specify your color choice in your checkout notes. Price calculated at per linear foot x length of trailer.

      $4,560.00

      (Deposit: $4560)
      Add to Cart

      Metal Covered (Stainless Steel) Walls & Ceiling Combo-Any Width Model ($350 PLF)

      Stainless steel covered walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

      Stainless steel covered walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

      $13,300.00

      (Deposit: $13300)
      Add to Cart

      Metal Covered (White) Walls & Ceiling Combo-Any Width Model ($95 PLF)

      Add white metal walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

      Add white metal walls and ceiling on any width model. Price calculated at per linear foot x length of trailer.

      $3,610.00

      (Deposit: $3610)
      Add to Cart

      Partition Wall-Any Width & Height Trailer (No Door)

      This will add a plywood covered wall with no door across the width of any trailer at your location choice.

      This will add a plywood covered wall with no door across the width of any trailer at your location choice.

      $600.00

      (Deposit: $600.00)
      Add to Cart

      Partition Wall-Any Width & Height Trailer (With 32” Pocket Slider Door)

      This will add a plywood covered wall with a 32” wide pocket slider door door across the width of any trailer at your location choice.

      This will add a plywood covered wall with a 32” wide pocket slider door door across the width of any trailer at your location choice.

      $999.00

      (Deposit: $999.00)
      Add to Cart

      Partition Wall-Any Width & Height Trailer (With 32” Walk-Thru Door)

      This will add a plywood covered wall with a 32” wide walk through door across the width of any trailer at your location choice.

      This will add a plywood covered wall with a 32” wide walk through door across the width of any trailer at your location choice.

      $799.00

      (Deposit: $799.00)
      Add to Cart

      Ramp Door & Flap Covered in ATP-Any Size Ramp Door

      Covers any ramp door and the flap end in aluminum tread plate.

      Covers any ramp door and the flap end in aluminum tread plate.

      $250.00

      (Deposit: $250.00)
      Add to Cart

      Ramp Door & Flap Covered in Black Rubber Tread Plate-Any Size Ramp Door

      Covers any ramp door and the flap end in black rubber tread plate.

      Covers any ramp door and the flap end in black rubber tread plate.

      $235.00

      (Deposit: $235.00)
      Add to Cart

      Walls Covered 36” High in Black Carpet-Any Width Model ($28 PLF)

      36” high black carpet on side walls. Price calculated per linear foot x length of any width model.

      36” high black carpet on side walls. Price calculated per linear foot x length of any width model.

      $1,064.00

      (Deposit: $1064)
      Add to Cart

      Walls Covered in Aluminum Tread Plate (ATP)-Any Width Model ($98 PLF)

      Finished walls covered in ATP. Price calculated per linear foot x length of any width model.

      Finished walls covered in ATP. Price calculated per linear foot x length of any width model.

      $3,724.00

      (Deposit: $3724)
      Add to Cart

      Walls Covered in Colored Aluminum Metal-Any Width Model ($60 PLF)

      Finished walls covered in colored white or other standard available color aluminum metal. Price calculated per linear foot x length of any width model.

      Finished walls covered in colored white or other standard available color aluminum metal. Price calculated per linear foot x length of any width model.

      $2,280.00

      (Deposit: $2280)
      Add to Cart

      Walls Covered in Mill Finish Aluminum Metal-Any Width Model ($50 PLF)

      Finished walls covered with the mill unfinished side of aluminum metal. Price calculated per linear foot x length of any width model.

      Finished walls covered with the mill unfinished side of aluminum metal. Price calculated per linear foot x length of any width model.

      $1,900.00

      (Deposit: $1900)
      Add to Cart

      Walls UPGRADED to 3/8” Pressure Treated Plywood ILO Standard Plywood ($40 PLF)

      Upgrade the standard 3/8” plywood walls to pressure treated 3/8” plywood. Price calculated per linear foot x length of any width model.

      Upgrade the standard 3/8” plywood walls to pressure treated 3/8” plywood. Price calculated per linear foot x length of any width model.

      $1,520.00

      (Deposit: $1520)
      Add to Cart

      Wheel Well Interior Boxes Covered in Aluminum Tread Plate (8.5 Wide Models)

      The steel wheel well boxes covered in ATP on any 8.5 wide model. Note: If ordering metal walls and ceiling combination this option is included.

      The steel wheel well boxes covered in ATP on any 8.5 wide model. Note: If ordering metal walls and ceiling combination this option is included.

      $120.00

      (Deposit: $120.00)
      Add to Cart

      Winch Plate in Frame

      This adds a steel winch plate welded in frame under plywood floor in front center of trailer for your after-market winch install.

      This adds a steel winch plate welded in frame under plywood floor in front center of trailer for your after-market winch install.

      $99.00

      (Deposit: $99.00)
      Add to Cart
    • Dish Wash 3-Sinks w/Hand Wash Sink in Base Cabinet w/Water Service Package (Requires Min 7' Wide Tandem Axle Model)

      Includes: 3-sink dish wash sinks, single hand wash sink all in a base cabinet, large 30 gal fresh water holding tank, 40 gal waste water holding tank,  with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump.  (NOTE: Power source is not included. Must purchase 12V battery power or 110V electrical power service separately if desired). Normally installed across flat front wall on 8.5' wide models.

      Includes: 3-sink dish wash sinks, single hand wash sink all in a base cabinet, large 30 gal fresh water holding tank, 40 gal waste water holding tank,  with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump.  (NOTE: Power source is not included. Must purchase 12V battery power or 110V electrical power service separately if desired). Normally installed across flat front wall on 8.5' wide models.

      $3,699.00

      (Deposit: $3,699.00)
      Add to Cart

      Hot Plate, Mini-Fridge, Microwave, Small Sink in Cabinet w/Water Supply (no water heater) Requires Minimum 6' Wide Tandem Axle Model

      Great for camping. Package includes: 110V hot plate, mini-fridge & microwave in a cabinet, with a small hand sink. Water tanks for fresh water and waste water, your choice 12V or 110V water pump. Must add 12V and/or 110V power service separately if desired.

      Great for camping. Package includes: 110V hot plate, mini-fridge & microwave in a cabinet, with a small hand sink. Water tanks for fresh water and waste water, your choice 12V or 110V water pump. Must add 12V and/or 110V power service separately if desired.

      $2,499.00

      (Deposit: $2,499.00)
      Add to Cart

      Kitchen Sink in Full Base Cabinet w/Water Service

      This is one kitchen sink in a base cabinet. Includes: Sink, base cabinet, holding tanks with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump.  (NOTE: Power source is not included. Must purchase 12V battery power or 110V electrical power service separately if desired).

      This is one kitchen sink in a base cabinet. Includes: Sink, base cabinet, holding tanks with fill/drain valves, 2.5 gal 110V water heater, choice of 12V or 110V water pump.  (NOTE: Power source is not included. Must purchase 12V battery power or 110V electrical power service separately if desired).

      $2,999.00

      (Deposit: $2,999.00)
      Add to Cart

      Kitchen Sink in Full Base Cabinet-NO Water Service

      This is one kitchen hand sink in a base cabinet. Includes: Sink in a base cabinet only. Choose this if you will be adding plumbing after-market, or choose this if you are also purchasing a bathroom full water service package and this sink can be tied to that same plumbing service.

      This is one kitchen hand sink in a base cabinet. Includes: Sink in a base cabinet only. Choose this if you will be adding plumbing after-market, or choose this if you are also purchasing a bathroom full water service package and this sink can be tied to that same plumbing service.

      $1,049.00

      (Deposit: $1,049.00)
      Add to Cart

      Sink Splash Guard

      Add a splash guard on any sink purchased.

      Add a splash guard on any sink purchased.

      $149.00

      (Deposit: $149.00)
      Add to Cart

      Tankless On-Demand Water Heater UPGRADE

      This will upgrade from a standard 2.5 gal 110V water heater to an on-demand tankless 110V water heater. Must purchase electrical service separately if desired.

      This will upgrade from a standard 2.5 gal 110V water heater to an on-demand tankless 110V water heater. Must purchase electrical service separately if desired.

      $400.00

      (Deposit: $400.00)
      Add to Cart

      Water Heater UPGRADE From Standard 2.5 Gal to 12 Gal

      If you are purchasing any water package separately that includes the 2.5 gal water heater, and want to upgrade to a larger capacity hot water heater, this will upgrade from the standard 2.5 gal to 12 gal capacity 110V water heater. Note: Electrical must be purchased separately if desired.

      If you are purchasing any water package separately that includes the 2.5 gal water heater, and want to upgrade to a larger capacity hot water heater, this will upgrade from the standard 2.5 gal to 12 gal capacity 110V water heater. Note: Electrical must be purchased separately if desired.

      $799.00

      (Deposit: $799.00)
      Add to Cart

      Water Holding Tanks ONLY-Installed & Stubbed Out (Minimum 7' Wide Tandem Axle Model)

      If you want the fresh water and gray water holding tanks installed in a trailer you are ordering, this option is only for the tanks installed and they will only be stubbed out for your after-market plumbing completion.

      If you want the fresh water and gray water holding tanks installed in a trailer you are ordering, this option is only for the tanks installed and they will only be stubbed out for your after-market plumbing completion.

      $699.00

      (Deposit: $699.00)
      Add to Cart
    • 10' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $5,699.00

      (Deposit: $5,699.00)
      Add to Cart

      11' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $6,199.00

      (Deposit: $6,199.00)
      Add to Cart

      12' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $6,399.00

      (Deposit: $6,399.00)
      Add to Cart

      12' Long x 36” Wide Vented Range Hood w/TWO (2) Exhaust Fans

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $7,699.00

      (Deposit: $7,699.00)
      Add to Cart

      13' Long x 36” Wide Vented Range Hood w/TWO (2) Exhaust Fans

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $7,799.00

      (Deposit: $7,799.00)
      Add to Cart

      4' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $3,499.00

      (Deposit: $3,499.00)
      Add to Cart

      4' Long x 42” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $3,699.00

      (Deposit: $3,699.00)
      Add to Cart

      5' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $3,799.00

      (Deposit: $3,799.00)
      Add to Cart

      6' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $3,999.00

      (Deposit: $3,999.00)
      Add to Cart

      7' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $4,299.00

      (Deposit: $4,299.00)
      Add to Cart

      8' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $4,899.00

      (Deposit: $4,899.00)
      Add to Cart

      9' Long x 36” Wide Vented Range Hood w/Single Exhaust Fan

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      Requires minimum 7' inside trailer height. Installed in your side wall location choice, with required rooftop exhaust vent. Electrical service not wired to hood unless you also purchase an electrical package with panel box separately.

      $5,199.00

      (Deposit: $5,199.00)
      Add to Cart

      Propane Tank Cage Only-19” x 19” for 100# Tank (each)

      Can be mounted on rear (with no door or only a walk-thru door) or on front tongue. If tongue mounted as in picture, requires extended tongue purchased separately. Propane tank cage only. Fits 100# tank. Price per each storage cage.

      Can be mounted on rear (with no door or only a walk-thru door) or on front tongue. If tongue mounted as in picture, requires extended tongue purchased separately. Propane tank cage only. Fits 100# tank. Price per each storage cage.

      $210.00

      (Deposit: $210.00)
      Add to Cart
    • BLACK Fenders-UPGRADE on Any Size Trailer-ILO Standard Aluminum Fenders (pair)

      If you want black fenders instead of the standard aluminum finish fenders on any size trailer, add this option to upgrade both fenders.

      If you want black fenders instead of the standard aluminum finish fenders on any size trailer, add this option to upgrade both fenders.

      $125.00

      (Deposit: $125.00)
      Add to Cart

      Black Steel Modular Wheels (UPGRADE) ILO Standard Silver Modular Wheels ($10 per each wheel)

      Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

      Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

      $10.00

      (Deposit: $10.00)
      Add to Cart

      Blackout Exterior Trim w/Any Exterior Color Choice ($16 PLF)

      This will change the following trim only to black: All bottom and top trim, side door trim and the bar lock and hasp, front ATP stone guard and vertical nose plate. DOES NOT CHANGE FENDERS (standard aluminum) OR WHEELS TO BLACK (from standard silver mod wheel). MUST  PURCASE black fenders and/or black steel modular wheels options separately if desired. If ordering concession door, must add black trim on concession door separately if desired.

      This will change the following trim only to black: All bottom and top trim, side door trim and the bar lock and hasp, front ATP stone guard and vertical nose plate. DOES NOT CHANGE FENDERS (standard aluminum) OR WHEELS TO BLACK (from standard silver mod wheel). MUST  PURCASE black fenders and/or black steel modular wheels options separately if desired. If ordering concession door, must add black trim on concession door separately if desired.

      $608.00

      (Deposit: $608)
      Add to Cart

      Blackout UPGRADE on 12” or 24” Tall Anodized (or ATP) If Ordering Motorcycle Decor Package ($16 PLF)

      If ordering a motorcycle decor package that includes 12” or 24” anodized (smooth) or the ATP upgrade around trailer bottom, and you want it blacked out, add this option. Price calculated at times per linear foot of trailer length.

      If ordering a motorcycle decor package that includes 12” or 24” anodized (smooth) or the ATP upgrade around trailer bottom, and you want it blacked out, add this option. Price calculated at times per linear foot of trailer length.

      $608.00

      (Deposit: $608)
      Add to Cart

      Motorcycle Hauler 12” Tall Decor Package w/Mags-6' or 7' Wide Single Axle Models

      Add on any single axle 6' or 7' wide model any length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      Add on any single axle 6' or 7' wide model any length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      $625.00

      (Deposit: $625.00)
      Add to Cart

      Motorcycle Hauler 12” Tall Decor Package w/Mags-6' or 7' Wide Tandem Axle Models

      Add on any tandem axle 6' or 7' wide model any length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      Add on any tandem axle 6' or 7' wide model any length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      $775.00

      (Deposit: $775.00)
      Add to Cart

      Motorcycle Hauler 12” Tall Decor Package w/Mags-8.5 Wide Tandem Axle Models (Only up to 24')

      Add on any tandem axle 8.5 wide model up to 24' in length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      Add on any tandem axle 8.5 wide model up to 24' in length. Package Incudes: 12” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      $800.00

      (Deposit: $800.00)
      Add to Cart

      Motorcycle Hauler 24” Tall Decor Package w/Mags-6' or 7' Wide Single Axle Models

      Add on any single axle 6' or 7' wide model any length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      Add on any single axle 6' or 7' wide model any length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      $725.00

      (Deposit: $725.00)
      Add to Cart

      Motorcycle Hauler 24” Tall Decor Package w/Mags-6' or 7' Wide Tandem Axle Models

      Add on any tandem axle 6' or 7' wide model any length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      Add on any tandem axle 6' or 7' wide model any length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      $875.00

      (Deposit: $875.00)
      Add to Cart

      Motorcycle Hauler 24” Tall Decor Package w/Mags-8.5 Wide Tandem Axle Models (Only up to 24')

      Add on any tandem axle 8.5 wide model up to 24' in length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      Add on any tandem axle 8.5 wide model up to 24' in length. Package Incudes: 24” tall anodized (smooth aluminum) around all sides and rear and on all four corners. Pair of rear fold-down stabilizer jacks, six (6) floor flush mount D-ring tie-downs, aluminum mags w/black inlay, a pair of two-way aluminum deluxe side wall air vents.

      $900.00

      (Deposit: $900.00)
      Add to Cart

      Motorcycle Hauler Decor Package UPGRADE to ATP ILO Anodized (Smooth) Sides, Rear, Corners

      This upgrades any motorcycle hauler decor package you choose, on any size trailer, from the standard anodized aluminum decor included in the package to aluminum tread plate (ATP).

      This upgrades any motorcycle hauler decor package you choose, on any size trailer, from the standard anodized aluminum decor included in the package to aluminum tread plate (ATP).

      $150.00

      (Deposit: $150.00)
      Add to Cart

      Race Ready Complete Package-Any 8.5 Wide Model (For 18' to 24' Long)

      Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

      Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

      $6,199.00

      (Deposit: $6,199.00)
      Add to Cart

      Race Ready Complete Package-Any 8.5 Wide Model (For 26' to 30' Long)

      Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

      Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

      $6,899.00

      (Deposit: $6,899.00)
      Add to Cart

      Race Ready Complete Package-Any 8.5 Wide Model (For 32' to 36' Long)

      Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

      Race Ready Package Includes:**BASE & OVERHEAD CABINETS ACROSS FRONT WALL (V-nose or Flat Front) **ATP, RTP, OR VINYL FLOORING ON BOX FLOOR, RAMP & FLAP**48” X 54” ESCAPE DOOR**48” SIDE DOOR W/ STEPWELL & FLUSHLOCK AND BARLOCK**TRIPLE TUBE TONGUE**FRONT AND REAR ANODIZED OR ATP CORNERS**WHITE METAL OR MILL FINISH WALLS & CEILING**30 AMP ELEC PKG (PANEL BOX, (2) RECEPTS, INVERTER, (2) 12v 48” STRIP LIGHTS)**(2) 12V EXTERIOR RACE LIGHTS**(2) 12V REAR LOADING LIGHTS**(1) 12V DEEP CYCLE BATTERY

      $7,499.00

      (Deposit: $7,499.00)
      Add to Cart

      Race Ready Package-Upgrade Any Race Ready Complete Package from 30 AMP to 50 AMP Electric Service

      If you are ordering a RACE READY PACKAGE with the standard 30 AMP electrical service included, and you desire a 50 AMP panel electric service ILO of the 30 AMP service included in the package, add this option.

      If you are ordering a RACE READY PACKAGE with the standard 30 AMP electrical service included, and you desire a 50 AMP panel electric service ILO of the 30 AMP service included in the package, add this option.

      $100.00

      (Deposit: $100.00)
      Add to Cart
    • 8' x 10' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

      Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

      Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

      $3,399.00

      (Deposit: $3,399.00)
      Add to Cart

      8' x 12' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

      Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

      Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

      $3,699.00

      (Deposit: $3,699.00)
      Add to Cart

      8' x 8' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

      Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

      Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

      $2,999.00

      (Deposit: $2,999.00)
      Add to Cart

      Brite Dip Aluminum Front Header Cap w/Cast Corners (7'or 8.5' Wide Models Only)

      Only available on 7' wide and 8.5 wide models with the flat front.

      Only available on 7' wide and 8.5 wide models with the flat front.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      Ladder Rack Arms (Cut-Down Low Profile) Aluminum (each) Min 2 Required

      Roof ladder rack arms ”cut down” low as possible to the roof top for lower height cross arms above trailer top. Mounted to top side with braces and cross arms. Requires minimum of two (2) arms. Max capacity of each arm approximately 200 lbs. Recommend one every 4-6 feet between arm spacing, depending on your load.

      Roof ladder rack arms ”cut down” low as possible to the roof top for lower height cross arms above trailer top. Mounted to top side with braces and cross arms. Requires minimum of two (2) arms. Max capacity of each arm approximately 200 lbs. Recommend one every 4-6 feet between arm spacing, depending on your load.

      $220.00

      (Deposit: $220.00)
      Add to Cart

      Ladder Rack Arms-Aluminum (each) Min 2 Required

      Roof ladder rack arms mounted to top side with braces and cross arms. Requires minimum of two (2) arms. Max capacity of each arm approximately 200 lbs. Recommend one arm every 4-6 feet between arm spacing, depending on your load.

      Roof ladder rack arms mounted to top side with braces and cross arms. Requires minimum of two (2) arms. Max capacity of each arm approximately 200 lbs. Recommend one arm every 4-6 feet between arm spacing, depending on your load.

      $160.00

      (Deposit: $160.00)
      Add to Cart

      One-Piece Aluminum Roof (UPGRADE) Any Width Model ($25 PLF)

      If you want an all aluminum metal roof top in one piece with no seams, choose this option. Price is calculated per linear foot x length of any width model.

      If you want an all aluminum metal roof top in one piece with no seams, choose this option. Price is calculated per linear foot x length of any width model.

      $950.00

      (Deposit: $950)
      Add to Cart

      One-Piece Rubber Roof (RV Style) UPGRADE on 6' or 7' Wide Models-7/16” OSB Underlayment ($25 PLF)

      6' and 7' wide models come standard with a galvalume (galvanized aluminum) metal seamed roof. If you want a rubberized roof top as on campers, supported by 7/16” OSB underlayment, add this option. (Rubber roof is included as standard on all 8.5 wide models). Price calculated per linear foot x trailer length.

      6' and 7' wide models come standard with a galvalume (galvanized aluminum) metal seamed roof. If you want a rubberized roof top as on campers, supported by 7/16” OSB underlayment, add this option. (Rubber roof is included as standard on all 8.5 wide models). Price calculated per linear foot x trailer length.

      $950.00

      (Deposit: $950)
      Add to Cart

      Walk-on Roof Full Length on Any Width Model ($20 PLF)

      Includes 3/4” OSB under liner installed under full length of trailer roof with 12” on center roof cross bow members. Price is calculated per linear foot x length of any width model.

      Includes 3/4” OSB under liner installed under full length of trailer roof with 12” on center roof cross bow members. Price is calculated per linear foot x length of any width model.

      $760.00

      (Deposit: $760)
      Add to Cart
    • Bed-Full Size w/Mattress

      $1,099.00

      (Deposit: $1,099.00)
      Add to Cart

      Bed-Queen Size Fold-up w/Mattress

      $1,699.00

      (Deposit: $1,699.00)
      Add to Cart

      Bed-Single Fold-down w/Mattress

      $949.00

      (Deposit: $949.00)
      Add to Cart

      Bunk Bed & Rails w/Mattresses

      $1,899.00

      (Deposit: $1,899.00)
      Add to Cart

      Sofa & Single Bed Combo

      $1,099.00

      (Deposit: $1,099.00)
      Add to Cart
    • 3000# Electric Tongue Jack w/Battery-Upgrade from Standard 2000# Manual Jack

      This upgrades from a standard manual wind jack to 12V electric 3000# capacity tongue jack and includes the 12V battery.

      This upgrades from a standard manual wind jack to 12V electric 3000# capacity tongue jack and includes the 12V battery.

      $449.00

      (Deposit: $449.00)
      Add to Cart

      5000# Electric Tongue Jack w/Battery-Upgrade from Standard 2000# Manual Jack

      This upgrades from a standard manual wind jack to 12V electric 5000# capacity tongue jack and includes the 12V battery.

      This upgrades from a standard manual wind jack to 12V electric 5000# capacity tongue jack and includes the 12V battery.

      $649.00

      (Deposit: $649.00)
      Add to Cart

      5000# Tongue Jack Upgrade (From Standard 2000#)

      This will upgrade from a standard 2000# tongue jack to 5000#.

      This will upgrade from a standard 2000# tongue jack to 5000#.

      $60.00

      (Deposit: $60.00)
      Add to Cart

      7000# Drop Leg Tongue Jack-Upgrade From Standard 2000# Jack

      This upgrades from the standard 2000# tongue jack

      This upgrades from the standard 2000# tongue jack

      $119.00

      (Deposit: $119.00)
      Add to Cart

      8000# Drop Leg Tongue Jack-Upgrade From Standard 2000# Jack

      This upgrades from the standard 2000# tongue jack

      This upgrades from the standard 2000# tongue jack

      $139.00

      (Deposit: $139.00)
      Add to Cart

      Bogey Roller Wheels Under Rear of Trailer Frame (Pair)

      Add to any model. Steel roller bogey wheels welded underneath rear frame to lift trailer up if pulling over steep terrain.

      Add to any model. Steel roller bogey wheels welded underneath rear frame to lift trailer up if pulling over steep terrain.

      $225.00

      (Deposit: $225.00)
      Add to Cart

      Caster (Dolly) Wheel on Tongue Jack

      Can be added to most tongue jacks, but not the drop leg HD jacks.

      Can be added to most tongue jacks, but not the drop leg HD jacks.

      $45.00

      (Deposit: $45.00)
      Add to Cart

      D-Ring Floor Flush Mounted Tie-Downs w/Steel Backer Plate In Frame (each)

      Can be placed at your location choice. Add as many to cart as you desire. Price per each.

      Can be placed at your location choice. Add as many to cart as you desire. Price per each.

      $22.00

      (Deposit: $22.00)
      Add to Cart

      D-Ring Ties-Wall Mounted (each)

      Normally installed 36” above floor level but can be placed at your location choice. Add as many to cart as you desire. Price per each.

      Normally installed 36” above floor level but can be placed at your location choice. Add as many to cart as you desire. Price per each.

      $15.00

      (Deposit: $15.00)
      Add to Cart

      E-Track (Steel) Flush Mounted in Floor (price per foot)

      Steel flush mounted floor E-track. Must purchase by row  x full length of your trailer. Example: 20' trailer with two rows of floor  E-track  will require 40' total of floor E-track. Add to cart and then update quantity in cart to desired number of feet.

      Steel flush mounted floor E-track. Must purchase by row  x full length of your trailer. Example: 20' trailer with two rows of floor  E-track  will require 40' total of floor E-track. Add to cart and then update quantity in cart to desired number of feet.

      $15.00

      (Deposit: $15.00)
      Add to Cart

      E-Track (Steel) Flush Mounted In Wall (price per foot)

      Steel flush mounted E-track. Must purchase by row  x full length of your trailer. Example: 20' trailer with one row of wall E-track on each side will require 37' total of wall E-track. Driver side = 20', curbside = 17' (deducting 3' for side door). Add to cart and then update quantity in cart to desired number of feet.

      Steel flush mounted E-track. Must purchase by row  x full length of your trailer. Example: 20' trailer with one row of wall E-track on each side will require 37' total of wall E-track. Driver side = 20', curbside = 17' (deducting 3' for side door). Add to cart and then update quantity in cart to desired number of feet.

      $12.00

      (Deposit: $12.00)
      Add to Cart

      Fold-down Rear Stabilizer Jacks (pair)

      Add under rear corners on any model. 1000# capacity

      Add under rear corners on any model. 1000# capacity

      $79.00

      (Deposit: $79.00)
      Add to Cart

      Scissor Jacks (5000#) w/Handle-One Pair

      Add a pair of 5000# scissor stabilizer jacks to any model. (Mounted on rear corners but can also be added to front corners if specified).

      Add a pair of 5000# scissor stabilizer jacks to any model. (Mounted on rear corners but can also be added to front corners if specified).

      $189.00

      (Deposit: $189.00)
      Add to Cart

      Side Wind Jack Handle Instead of Standard Top Wind Handle

      All models come standard with a top wind tongue jack. This changes to a side wind jack handle.

      All models come standard with a top wind tongue jack. This changes to a side wind jack handle.

      $65.00

      (Deposit: $65.00)
      Add to Cart

      Side-Wind Square HD 5000# Tongue Jack Upgrade-From Standard 2000# Top Wind Jack

      Upgrades to the square sidewinder HD jack from standard top wind 2000# jack.

      Upgrades to the square sidewinder HD jack from standard top wind 2000# jack.

      $115.00

      (Deposit: $115.00)
      Add to Cart

      Steel Skid Plates Under Rear Corners (pair)

      Add on any trailer under framework to help protect rear of trailer if drags over terrain.

      Add on any trailer under framework to help protect rear of trailer if drags over terrain.

      $99.00

      (Deposit: $99.00)
      Add to Cart

      Swing-Up Swivel Tongue Jack Upgrade (Only available in 2000#)

      Upgrades the standard 2000# tongue jack to a swivel-up tongue jack.

      Upgrades the standard 2000# tongue jack to a swivel-up tongue jack.

      $79.00

      (Deposit: $79.00)
      Add to Cart

      Winch Plate in Frame

      This adds a steel winch plate welded in frame under plywood floor in front center of trailer for your after-market winch install.

      This adds a steel winch plate welded in frame under plywood floor in front center of trailer for your after-market winch install.

      $99.00

      (Deposit: $99.00)
      Add to Cart
    • 10' Wide Fold-Down STAGE on Trailer Side (8.5 Wide Models Only)

      Stage will protrude out the distance based on the trailer side height. Price includes: 10' wide stage, HD jacks to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box, recessed in floor battery/box storage compartment.

      Stage will protrude out the distance based on the trailer side height. Price includes: 10' wide stage, HD jacks to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box, recessed in floor battery/box storage compartment.

      $4,399.00

      (Deposit: $4,399.00)
      Add to Cart

      14' Wide Fold-Down STAGE on Trailer Side (8.5 Wide Models Only)

      Stage will protrude out the distance based on the trailer side height. Price includes: 10' wide stage, HD jacks to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box, recessed in floor battery/box storage compartment.

      Stage will protrude out the distance based on the trailer side height. Price includes: 10' wide stage, HD jacks to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box, recessed in floor battery/box storage compartment.

      $4,999.00

      (Deposit: $4,999.00)
      Add to Cart

      18' Wide Fold-Down STAGE on Trailer Side (8.5 Wide Models Only)

      Stage will protrude out the distance based on the trailer side height. Price includes: 10' wide stage, HD jacks to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box, recessed in floor battery/box storage compartment.

      Stage will protrude out the distance based on the trailer side height. Price includes: 10' wide stage, HD jacks to support open stage, 5000# 12V winch mounted on winch plate to raise & lower stage, 12V deep cycle battery to power winch, plastic battery safety box, recessed in floor battery/box storage compartment.

      $5,599.00

      (Deposit: $5,599.00)
      Add to Cart

      36” Tall Rails Added On Stage w/Steps

      Add this to any size stage you select to add rails and access steps.

      Add this to any size stage you select to add rails and access steps.

      $999.00

      (Deposit: $999.00)
      Add to Cart
    • 12” On Center Floor Cross Members-Upgrade on Any Width Model ($10 PLF)

      Choose this to upgrade any width model to 12” on center floor cross members. Price calculated per linear foot x length of any width model.

      Choose this to upgrade any width model to 12” on center floor cross members. Price calculated per linear foot x length of any width model.

      $380.00

      (Deposit: $380)
      Add to Cart

      12” On Center Roof Cross Members-Upgrade on Any Width Model ($14 PLF)

      Choose this to upgrade to 12” on center roof bow cross members, any width. Price calculated per linear foot x length of trailer.

      Choose this to upgrade to 12” on center roof bow cross members, any width. Price calculated per linear foot x length of trailer.

      $532.00

      (Deposit: $532)
      Add to Cart

      12” On Center Wall Posts-Upgrade on Any Width Model ($15 PLF)

      Choose this to upgrade to 12” on center wall posts on any width model. Price calculated per linear foot x length of trailer.

      Choose this to upgrade to 12” on center wall posts on any width model. Price calculated per linear foot x length of trailer.

      $570.00

      (Deposit: $570)
      Add to Cart

      6” I-Beam Main Frame Upgrade on Any Standard 3” or 4” Tube Frame Model

      Upgrade any size standard with a 3” or 4” tube main frame to 6” I-Beam main frame.

      Upgrade any size standard with a 3” or 4” tube main frame to 6” I-Beam main frame.

      $225.00

      (Deposit: $225.00)
      Add to Cart

      6” Tongue Frame Upgraded to 8” Tongue Frame (must add separately if desired with 8” main frame upgrade)

      Only if you are upgrading a 6” main frame model to 8” main frame in the structure upgrades, and also want the tongue frame upgraded to 8” then also add this option for a flat charge. Tongue frame is not upgraded with frame upgrade to 8” unless you add this option.

      Only if you are upgrading a 6” main frame model to 8” main frame in the structure upgrades, and also want the tongue frame upgraded to 8” then also add this option for a flat charge. Tongue frame is not upgraded with frame upgrade to 8” unless you add this option.

      $249.00

      (Deposit: $249.00)
      Add to Cart

      A/C Roof Brace Only (For Your After-Market A/C Install)

      Only adds a roof brace to hold your after-market A/C. Normally centered in roof.

      Only adds a roof brace to hold your after-market A/C. Normally centered in roof.

      $50.00

      (Deposit: $50.00)
      Add to Cart

      A/C Roof Brace w/Wire Stub (For Your After-Market A/C Install)

      Adds a roof brace to hold A/C and a wire stub ran to your panel box if electrical service also purchased separately, or stub will be to front wall. Normally centered in roof.

      Adds a roof brace to hold A/C and a wire stub ran to your panel box if electrical service also purchased separately, or stub will be to front wall. Normally centered in roof.

      $149.00

      (Deposit: $149.00)
      Add to Cart

      Bogey Roller Wheels Under Rear of Trailer Frame (Pair)

      Add to any model. Steel roller bogey wheels welded underneath rear frame to lift trailer up if pulling over steep terrain.

      Add to any model. Steel roller bogey wheels welded underneath rear frame to lift trailer up if pulling over steep terrain.

      $225.00

      (Deposit: $225.00)
      Add to Cart

      Extra Bracing Added for Rear Gussets-Any Trailer Size

      Add this if you want extra bracing for rear of trailer gussets for extra rear frame strength.

      Add this if you want extra bracing for rear of trailer gussets for extra rear frame strength.

      $100.00

      (Deposit: $100.00)
      Add to Cart

      Flat Front on All Width Bumper Pull Models-Changes Trailer From V-Nose to Flat Front

      Choose this to change from the standard V-nose front to a flat front on any width bumper pull model. Note: Only 8.5 wide flat front will also have anodized front corners. Must add anodized front corners on any other width model, if desired.

      Choose this to change from the standard V-nose front to a flat front on any width bumper pull model. Note: Only 8.5 wide flat front will also have anodized front corners. Must add anodized front corners on any other width model, if desired.

      $20.00

      (Deposit: $20.00)
      Add to Cart

      Recessed Battery Storage Compartment in Floor

      Store a 12V battery in floor storage compartment. Battery must be purchased separately

      Store a 12V battery in floor storage compartment. Battery must be purchased separately

      $279.00

      (Deposit: $279.00)
      Add to Cart

      Rounded (Soft) Front-Changes Trailer from the Standard V (Pointed) Nose

      Choose this is you want to change any V-nose bumper pull model to the more rounded front in lieu of the standard pointed front V-nose. (Cannot be used with the slant top V-option).

      Choose this is you want to change any V-nose bumper pull model to the more rounded front in lieu of the standard pointed front V-nose. (Cannot be used with the slant top V-option).

      $25.00

      (Deposit: $25.00)
      Add to Cart

      Slanted Top on V-Nose Covered in ATP

      Adds the slanted V-top on any width standard V-nose model. Cannot be used with the rounded soft nose option.

      Adds the slanted V-top on any width standard V-nose model. Cannot be used with the rounded soft nose option.

      $199.00

      (Deposit: $199.00)
      Add to Cart

      Steel Skid Plates Under Rear Corners (pair)

      Add on any trailer under framework to help protect rear of trailer if drags over terrain.

      Add on any trailer under framework to help protect rear of trailer if drags over terrain.

      $99.00

      (Deposit: $99.00)
      Add to Cart

      Tapered Front Nose Riser on Any Gooseneck (changes from standard flat nose)

      This option tapers the standard flat front on any gooseneck model to allow more clearance for turning and clearing truck cab. Reduces inside riser space.

      This option tapers the standard flat front on any gooseneck model to allow more clearance for turning and clearing truck cab. Reduces inside riser space.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      Upgrade Any 8.5 Wide to EXTRA Long 4' V-Nose, 15” Extended Triple Tube Tongue w/Sidewind Jack Included

      This adds about two feet to the standard V-nose length on any bumper pull model. Makes a very sharp pointed V nose. Also adds 15” tongue length and triple tube tongue. Also includes the required upgrade to side wind tongue jack.

      This adds about two feet to the standard V-nose length on any bumper pull model. Makes a very sharp pointed V nose. Also adds 15” tongue length and triple tube tongue. Also includes the required upgrade to side wind tongue jack.

      $349.00

      (Deposit: $349.00)
      Add to Cart

      Upgrade Any 8.5 Wide to Longer 3' V-Nose w/Sidewind Tongue Jack Included

      This adds about a foot to the standard V-nose length on any bumper pull model, does not add tongue length. Also includes the required upgrade to side wind jack.

      This adds about a foot to the standard V-nose length on any bumper pull model, does not add tongue length. Also includes the required upgrade to side wind jack.

      $225.00

      (Deposit: $225.00)
      Add to Cart

      Upgrade From 8” I-Beam Main Frame to 10” I-Beam Main Frame (For 26' or Longer Goosenecks or Bumper Pulls) REQUIRED on ANY Model w/8k or 10k Axles Upgrade

      Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are also upgrading tandem axles to 8k or 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering 8k or 10k axle upgrade on any tandem axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

      Available on any 26' or longer models that are standard with 8” I-beam Main Frame.  This frame upgrade is REQUIRED on any model if you are also upgrading tandem axles to 8k or 10k capacity!  If you are ordering any gooseneck model or any bumper pull model 26' or longer, that comes standard with 8” I-Beam main frame, choose this option to upgrade the frame to 10” I-beam. If you are ordering 8k or 10k axle upgrade on any tandem axle model, you must also add this 10” frame upgrade to your order. Price is a flat charge.

      $500.00

      (Deposit: $500.00)
      Add to Cart

      Upgrade From a Standard 6” I-Beam Frame to 6” Tube Frame (Flat Charge Any Size)

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 6” tubing frame. Price is a flat charge for any size.

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 6” tubing frame. Price is a flat charge for any size.

      $300.00

      (Deposit: $300.00)
      Add to Cart

      Upgrade From a Standard 6” I-Beam Frame to 8” Tube Frame ($49 PLF)

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 8” tubing frame. Price is calculated x per linear foot of trailer length.

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 8” tubing frame. Price is calculated x per linear foot of trailer length.

      $1,862.00

      (Deposit: $1862)
      Add to Cart

      Upgrade From a Standard 6” I-Beam Frame to DOUBLE 6” I-Beam Frame ($20 PLF)

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to a DOUBLE 6”  I-Beam  frame. Price is calculated x per linear foot of trailer length.

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to a DOUBLE 6”  I-Beam  frame. Price is calculated x per linear foot of trailer length.

      $760.00

      (Deposit: $760)
      Add to Cart

      Upgrade From a Standard 6” to 8” I-Beam Frame ($16 PLF)

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 8”. Price is calculated x per linear foot of trailer length.

      If you are ordering any model size that comes standard with a 6” I-Beam frame, choose this to upgrade the frame to 8”. Price is calculated x per linear foot of trailer length.

      $608.00

      (Deposit: $608)
      Add to Cart

      Upgrade From a Standard 8” I-Beam Frame to 8” Tube Frame ($29 PLF)

      If you are ordering any model size that comes standard with a 8” I-Beam frame, choose this to upgrade the frame to 8” tubing frame. Price calculated x per linear foot of trailer length.

      If you are ordering any model size that comes standard with a 8” I-Beam frame, choose this to upgrade the frame to 8” tubing frame. Price calculated x per linear foot of trailer length.

      $1,102.00

      (Deposit: $1102)
      Add to Cart

      Upgrade From a Standard 8” I-Beam Frame to DOUBLE 8” I-Beam Frame ($22 PLF)

      If you are ordering any model size that comes standard with a 8” I-Beam frame, choose this to upgrade the frame to a DOUBLE 8”  I-Beam  frame. Price is calculated x per linear foot of trailer length.

      If you are ordering any model size that comes standard with a 8” I-Beam frame, choose this to upgrade the frame to a DOUBLE 8”  I-Beam  frame. Price is calculated x per linear foot of trailer length.

      $836.00

      (Deposit: $836)
      Add to Cart

      V-Nose Front Riser on Any Gooseneck Model (Changes from Standard Flat Front Riser)

      Available on any gooseneck model but reduces inside riser space.

      Available on any gooseneck model but reduces inside riser space.

      $249.00

      (Deposit: $249.00)
      Add to Cart
    • 15” Extra Length w/Triple Tube Added To Standard Tongue on SINGLE Axle Model

      Adds 15” to overall tongue length and adds a center tube on tongue on any SINGLE axle model.

      Adds 15” to overall tongue length and adds a center tube on tongue on any SINGLE axle model.

      $225.00

      (Deposit: $225.00)
      Add to Cart

      15” Extra Length w/Triple Tube Added To Standard Tongue on Tandem Axle Model

      Adds 15” to overall tongue length and adds a center tube on tongue on any tandem axle model.

      Adds 15” to overall tongue length and adds a center tube on tongue on any tandem axle model.

      $125.00

      (Deposit: $125.00)
      Add to Cart

      24” Extra Length w/Triple Tube Added To Standard Tongue On SINGLE Axle Model

      Adds 24” extra length to overall tongue length and adds a center tube on any single axle model.

      Adds 24” extra length to overall tongue length and adds a center tube on any single axle model.

      $300.00

      (Deposit: $300.00)
      Add to Cart

      24” Extra Length w/Triple Tube Added To Standard Tongue On Tandem Axle Model

      Adds 24” extra length to overall tongue length and adds a center tube on any tandem axle model.

      Adds 24” extra length to overall tongue length and adds a center tube on any tandem axle model.

      $195.00

      (Deposit: $195.00)
      Add to Cart

      4” Square Kingpin Coupler Upgrade on Any Gooseneck Model

      Choose this option to upgrade any gooseneck standard 2-5/16” coupler to a kingpin coupler.

      Choose this option to upgrade any gooseneck standard 2-5/16” coupler to a kingpin coupler.

      $399.00

      (Deposit: $399.00)
      Add to Cart

      5th Wheel Coupler Upgrade on Any Gooseneck Model

      Choose this option to upgrade any gooseneck standard 2-5/16” coupler to a 5th wheel coupler.

      Choose this option to upgrade any gooseneck standard 2-5/16” coupler to a 5th wheel coupler.

      $389.00

      (Deposit: $389.00)
      Add to Cart

      6” Tongue Frame Upgraded to 8” Tongue Frame (must add separately if desired with 8” main frame upgrade)

      Only if you are upgrading a 6” main frame model to 8” main frame in the structure upgrades, and also want the tongue frame upgraded to 8” then also add this option for a flat charge. Tongue frame is not upgraded with frame upgrade to 8” unless you add this option.

      Only if you are upgrading a 6” main frame model to 8” main frame in the structure upgrades, and also want the tongue frame upgraded to 8” then also add this option for a flat charge. Tongue frame is not upgraded with frame upgrade to 8” unless you add this option.

      $249.00

      (Deposit: $249.00)
      Add to Cart

      Adjustable Height 2-5/16” Ball Coupler-Upgrade from Standard Stationary Coupler

      Choose this to upgrade any model to an adjustable height 2-5/16” ball coupler

      Choose this to upgrade any model to an adjustable height 2-5/16” ball coupler

      $189.00

      (Deposit: $189.00)
      Add to Cart

      Adjustable Height Pintle (Military) Coupler-Upgrade 8.5 Wide from Standard Stationary Coupler

      Choose this to upgrade any 8.5 wide model to an adjustable height pintle ring (military type) coupler

      Choose this to upgrade any 8.5 wide model to an adjustable height pintle ring (military type) coupler

      $179.00

      (Deposit: $179.00)
      Add to Cart

      ATP Cover Contoured to Fit A-Frame Tongue

      Used on flat front models or V-nose models with longer extended tongue. Shaped to fit on top of the A-frame open tongue area.

      Used on flat front models or V-nose models with longer extended tongue. Shaped to fit on top of the A-frame open tongue area.

      $149.00

      (Deposit: $149.00)
      Add to Cart

      ATP Covered Wood Platform On Tongue (For small generator)

      Used on flat front models or V-nose models with longer extended tongue. Can only be built to fit available open tongue space.

      Used on flat front models or V-nose models with longer extended tongue. Can only be built to fit available open tongue space.

      $179.00

      (Deposit: $179.00)
      Add to Cart

      Detachable Tongue w/5k Jack Upgrade & 5000# Pair of Scissor Jacks (Only Available on Flat Front Models)

      You must also select the change to flat front option when ordering detachable tongue. Tongue is fully removable from the front frame of the trailer. Price includes the required 5000# scissor jacks under front corners to hold up the trailer with tongue removed.

      You must also select the change to flat front option when ordering detachable tongue. Tongue is fully removable from the front frame of the trailer. Price includes the required 5000# scissor jacks under front corners to hold up the trailer with tongue removed.

      $899.00

      (Deposit: $899.00)
      Add to Cart

      Hitch Receiver Added to Rear of Any Model

      This will add a hitch receiver under the rear of any model for your use to attached a second tow behind trailer. (Check your state DMV for legality)

      This will add a hitch receiver under the rear of any model for your use to attached a second tow behind trailer. (Check your state DMV for legality)

      $250.00

      (Deposit: $250.00)
      Add to Cart

      Steel Generator Platform On Tongue (For larger generator)

      Used on flat front models. Can only be built to fit available open tongue space.

      Used on flat front models. Can only be built to fit available open tongue space.

      $249.00

      (Deposit: $249.00)
      Add to Cart

      Tongue A-Frame Covered in ATP (Requires Flat Front and/or Extended Tongue)

      Choose this to have the open A-frame tongue section on any bumper pull model covered in ATP. Normally used on a flat front model with or without extended tongue.

      Choose this to have the open A-frame tongue section on any bumper pull model covered in ATP. Normally used on a flat front model with or without extended tongue.

      $149.00

      (Deposit: $149.00)
      Add to Cart

      Tool Storage Box on Tongue (Flat Front or Extended Tongue w/V-Nose)

      Add on any model. Requires a flat front or extended tongue on a V-nose model.

      Add on any model. Requires a flat front or extended tongue on a V-nose model.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      Weight Distribution Kit Installed on Bumper Pull Model

      Choose this to have a weight distribution kit system pre-installed onto your trailer tongue.

      Choose this to have a weight distribution kit system pre-installed onto your trailer tongue.

      $699.00

      (Deposit: $699.00)
      Add to Cart
    • A/C Roof Brace Only (For Your After-Market A/C Install)

      Only adds a roof brace to hold your after-market A/C. Normally centered in roof.

      Only adds a roof brace to hold your after-market A/C. Normally centered in roof.

      $50.00

      (Deposit: $50.00)
      Add to Cart

      A/C Roof Brace w/Wire Stub (For Your After-Market A/C Install)

      Adds a roof brace to hold A/C and a wire stub ran to your panel box if electrical service also purchased separately, or stub will be to front wall. Normally centered in roof.

      Adds a roof brace to hold A/C and a wire stub ran to your panel box if electrical service also purchased separately, or stub will be to front wall. Normally centered in roof.

      $149.00

      (Deposit: $149.00)
      Add to Cart

      A/C Unit (15k) w/Heat Strip (Includes required roof brace and wire stub)

      Normally centered in roof. If no electrical package is also purchased, stub will be to front wall.

      Normally centered in roof. If no electrical package is also purchased, stub will be to front wall.

      $1,399.00

      (Deposit: $1,399.00)
      Add to Cart

      A/C Wall Thermostat w/ Bluetooth (Requires A Thermostat per A/C Unit Purchased)

      Add to use with separate A/C purchase.

      Add to use with separate A/C purchase.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      Maxx-Air Roof Vent Cover Shell (each)

      Add to cover any roof vent. Allows roof vent to remain open while driving or in rain.

      Add to cover any roof vent. Allows roof vent to remain open while driving or in rain.

      $79.00

      (Deposit: $79.00)
      Add to Cart

      Roof Vent-Manual Non-Powered (each)

      Add manual roof vent. Normally centered in trailer. Can be placed at your chosen roof location.

      Add manual roof vent. Normally centered in trailer. Can be placed at your chosen roof location.

      $99.00

      (Deposit: $99.00)
      Add to Cart

      Side Vents-Stationary Plastic (pair)

      All models come standard with one pair stationary side air vents. Choose this option to add another pair.

      All models come standard with one pair stationary side air vents. Choose this option to add another pair.

      $45.00

      (Deposit: $45.00)
      Add to Cart

      Side Vents-Upgrade to Aluminum or Black Two Way-Open/Close-UPGRADE (pair)

      Choose this to upgrade from the standard plastic stationary side vents to two-way aluminum side vents,

      Choose this to upgrade from the standard plastic stationary side vents to two-way aluminum side vents,

      $89.00

      (Deposit: $89.00)
      Add to Cart
    • 5-Lug Single Axle Model-Upgrade to Aluminum Mags (Fits 3500# Axle)

      Upgrades both wheels on a single axle from standard 5-lug steel wheels (fits 3500/2990 axle) to aluminum mags.

      Upgrades both wheels on a single axle from standard 5-lug steel wheels (fits 3500/2990 axle) to aluminum mags.

      $275.00

      (Deposit: $275.00)
      Add to Cart

      5-Lug Tandem Axle Model-Upgrade to Aluminum Mags (Fits 3500# Axle)

      Upgrades all 4 wheels from standard 5-lug steel wheels (fits 3500/2990 axle) to aluminum mags.

      Upgrades all 4 wheels from standard 5-lug steel wheels (fits 3500/2990 axle) to aluminum mags.

      $550.00

      (Deposit: $550.00)
      Add to Cart

      6-Lug Single Axle-Upgrade to Aluminum Mags (Fits 5200# Axle)

      If you purchase the upgrade on a single axle model to 5200 lb 6-lug axle. This option upgrades both wheels from standard 6-lug steel wheels (fits 5200# axle) to aluminum mags.

      If you purchase the upgrade on a single axle model to 5200 lb 6-lug axle. This option upgrades both wheels from standard 6-lug steel wheels (fits 5200# axle) to aluminum mags.

      $300.00

      (Deposit: $300.00)
      Add to Cart

      6-Lug Tandem Axle-Upgrade to Aluminum Mags (Fits 5200# Axles)

      Must first purchase axle upgrade on any trailer standard with 3500# axles. This option upgrades all 4 wheels on a tandem 5200#  axle model from 6-lug steel wheels (fits 5200# axle) to aluminum mags.

      Must first purchase axle upgrade on any trailer standard with 3500# axles. This option upgrades all 4 wheels on a tandem 5200#  axle model from 6-lug steel wheels (fits 5200# axle) to aluminum mags.

      $600.00

      (Deposit: $600.00)
      Add to Cart

      6-Lug Triple Axle-Upgrade to Aluminum Mags (Fits 5200# Axles)

      This option upgrades all 6 wheels on a triple 5200# axle model from 6-lug steel wheels (fits 5200# axle) to aluminum mags.

      This option upgrades all 6 wheels on a triple 5200# axle model from 6-lug steel wheels (fits 5200# axle) to aluminum mags.

      $900.00

      (Deposit: $900.00)
      Add to Cart

      8-Lug Tandem Axle-Upgrade to Aluminum Mags (Fits 7000# or 8000# Axles)

      This option upgrades all 4 wheels on a tandem 7000# or 8000# axle model from 8-lug steel wheels to aluminum mags.

      This option upgrades all 4 wheels on a tandem 7000# or 8000# axle model from 8-lug steel wheels to aluminum mags.

      $700.00

      (Deposit: $700.00)
      Add to Cart

      8-Lug Triple Axle-Upgrade to Aluminum Mags (Fits 7000# or 8000# Axles)

      This option upgrades all 6 wheels on a triple 7000# or 8000# axle model from 8-lug steel wheels to aluminum mags.

      This option upgrades all 6 wheels on a triple 7000# or 8000# axle model from 8-lug steel wheels to aluminum mags.

      $1,050.00

      (Deposit: $1,050.00)
      Add to Cart

      Black Steel Modular Wheels (UPGRADE) ILO Standard Silver Modular Wheels ($10 per each wheel)

      Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

      Choose this to upgrade any size trailer wheel from standard steel silver to black steel wheels. Add to cart then update quantity in cart to match number of wheels on trailer you are ordering. Number wheels required: SA=2, TA=4, Triple axle =6

      $10.00

      (Deposit: $10.00)
      Add to Cart

      Center Caps for Standard Steel Wheels (Set of 4) Fits Any Model w/Tandem 5-lug 3500# Axles

      Add on any tandem axle with 5-lug standard steel wheels. Price is for set of 4.

      Add on any tandem axle with 5-lug standard steel wheels. Price is for set of 4.

      $60.00

      (Deposit: $60.00)
      Add to Cart

      Center Caps for Standard Steel Wheels (Set of 4) Fits Any Model w/Tandem 6-lug 5200# Axles

      Add on any tandem axle with 6-lug standard steel wheels. Price is for set of 4.

      Add on any tandem axle with 6-lug standard steel wheels. Price is for set of 4.

      $75.00

      (Deposit: $75.00)
      Add to Cart

      Center Caps for Standard Steel Wheels (Set of 4) Fits Any Model w/Tandem 8-lug 7000# or 8000# Axles

      Add on any tandem axle with 8-lug standard steel wheels. Price is for set of 4.

      Add on any tandem axle with 8-lug standard steel wheels. Price is for set of 4.

      $90.00

      (Deposit: $90.00)
      Add to Cart

      Recessed Spare Tire Storage Compartment in Floor (8.5 Wide Only)

      Adds a recessed spare tire storage compartment in front trailer floor area on 8.5 wide model.

      Adds a recessed spare tire storage compartment in front trailer floor area on 8.5 wide model.

      $299.00

      (Deposit: $299.00)
      Add to Cart

      Spare 17.5” Wheel/Tire 14 Ply to Fit 10,000# 8- Lug Axle (each)

      Standard steel 17.5” wheel with standard 14 ply 8- lug spare to fit 10,000# axle model.

      Standard steel 17.5” wheel with standard 14 ply 8- lug spare to fit 10,000# axle model.

      $450.00

      (Deposit: $450.00)
      Add to Cart

      Spare 17.5” Wheel/Tire 16 Ply to Fit 10,000# 8 Lug Axle (each)

      Standard steel 17.5” wheel with upgraded 16 ply 8- lug spare to fit 10,000# axle model.

      Standard steel 17.5” wheel with upgraded 16 ply 8- lug spare to fit 10,000# axle model.

      $485.00

      (Deposit: $485.00)
      Add to Cart

      Spare Tire Mount Bracket on Inside of Trailer

      Inside spare mount bracket for any size spare wheel. Normally installed on curbside front V-nose wall (or flat front wall) down low, for easy access from side door. If you want another inside location mount, you must specify in your checkout notes.

      Inside spare mount bracket for any size spare wheel. Normally installed on curbside front V-nose wall (or flat front wall) down low, for easy access from side door. If you want another inside location mount, you must specify in your checkout notes.

      $69.00

      (Deposit: $69.00)
      Add to Cart

      Spare Tire Mount Bracket on Outside Front (Requires Flat Front or Must Add Extended Tongue on V-Nose Model)

      Outside spare mount bracket. Will fit on a flat front model or a V-nose only with extended tongue purchased separately.