Awning 08'- Lippert Electric 12v Power 8' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 10'- Lippert Electric 12v Power 10' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 12'- Lippert Electric 12v Power 12' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 14'- Lippert Electric 12v Power 14' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 16'- Lippert Electric 12v Power 16' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 18'- Lippert Electric 12v Power 18' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 20'- Lippert Electric 12v Power 20' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 22'- Lippert Electric 12v Power 22' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 23'- Lippert Electric 12v Power 23' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Stocked color is gradient black/gray/white. Can order any available Lippert color but will delay build time. (photo for illustration purpose only)

Awning 24'- Lippert Electric 12v Power 24' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Awning 25'- Lippert Electric 12v Power 25' Long w/12V Built-In Battery

Note: Awning length must be at least 2' shorter than your trailer length to allow room for mount brackets. Normally installed on passenger side but can be installed on your choice side location. Includes 12V mini awning battery built in awning arm and wired to your light harness. Will only operate when plugged into your vehicle to trickle charge the awning battery. (can add a separate 12v deep cycle on board battery power supply if desired-see electrical options). Available in gradient white to black or solid black, your choice.  (photo for illustration purpose only)

Weather Proof Shield-ADD To Any Size Awning

Standard awning comes with standard fabric with no storage shield-To protect fabric when rolled up, add this weather proof shield on to any size awning you are purchasing.

Add a Third 3500 lb Axle To Any 3500 lb Tandem Axle Model (Converts 3500 lb Tandem Axle Model to Triple 3500 lb Axles)

Then choose this option to ADD a third 3500 lb drop leaf axle, to upgrade to triple 3500 lb axles. Also includes frame upgrade.

Add a Third 5200 lb Drop Leaf Axle To Any 5200 lb Tandem Axle Model (Converts 5200 lb Tandem Axle Model to Triple 5200 lb Axles)

Unless the trailer size comes standard with tandem 5200# drop leaf axles, you must first purchase the upgrade on any tandem 3500 lb axle model to tandem 5200 lb axle capacity, drop leaf. Then choose this option to ADD a third 5200 lb axle, to upgrade to triple 5200 lb axles.

Narrowed Single Axle-On Any 6' or 7' Wide Model (places wheels/fenders inside trailer) *REQUIRES ADDING 6” MAIN FRAME UPGRADE

NOTE: ALSO REQUIRE UPGRADE TO 6” MAIN FRAME. Choose this to switch to narrow track axles on any single axle 6' or 7' wide model, if you want the wheels and fender wells to be inside the trailer.

Narrowed Tandem Axles-On Any Tandem 6' or 7' Wide Model (places wheels/fenders inside trailer) *Requires Min 6” Main Frame

Choose this to switch to shorter axles on any tandem standard axle 6' or 7' wide model, if you want the wheels and fender wells to be inside the trailer.

Spread Tandem Axles (California) Structure (Only Available on 8.5 Wide w/ Torsion Axle Upgrade)

Must also purchase an upgrade to any capacity ”torsion axles”. (cannot be used with drop leaf axles). Looks best with 7,000 lb torsion axles with the larger 16” wheels, as shown.

Spread TRIPLE Axles (California) Structure (Only Available on 8.5 Wide w/ Torsion Axle Upgrade)

Must also purchase an upgrade to any capacity ”torsion axles”. (cannot be used with drop leaf axles). Works best with 7,000 lb torsion axles with the larger 16” wheels, as shown.

Straight Leaf Spring Axle ILO Standard Drop Leaf Spring Axle-Any Size (Change Fee Only)

If you want straight axles (not the standard drop leaf axle) on any size trailer, this option changes all axles on any trailer you order to straight leaf spring axles. Straight leaf spring axles RAISE the deck level of any trailer about 3-1/2” higher off the ground. NOTE: This change will add an extra 1-2 weeks to the standard build lead time because these straight leaf spring axles are special ordered.

Upgrade 6', 7' or 8.5' Wide TA 3500 lb Drop Leaf Axle to 5,200 lb Drop Leaf Axles AND LARGER 6 lug Wheels

For 6', 7' or 8.5' wide models. Upgrades tandem axle model with standard 5 lug 3500 lb drop leaf axles to 5200 lb 6 lug drop leaf axles and upgrades to larger 15” radial tires. Also upgrades framework.

Upgrade 8.5 Wide (up to 24') From Tandem 3500 lb Drop Leaf to 7,000 lb Drop Leaf Axles w/ 8 Lug 16” Radials

This option upgrades from the standard tandem 3500 lb drop leaf axles on a 8.5 wide tandem axle model (up to 24' long) to 7000 lb drop leaf axles, also includes upgrading all wheels to 16” 8-lug wheels, on any tandem axle model up to 24' long.

Upgrade 8.5 Wide (up to 24') From Tandem 3500 lb Drop Leaf to 7,000 lb Torsion Axles w/ 8 Lug 16” Radials

This option upgrades from the standard tandem 3500 lb drop leaf axles on a 8.5 wide tandem axle model (up to 24' long) to 7000 lb torsion axles, also includes upgrading all wheels to 16” 8-lug wheels., any model up to 24' long.

Upgrade a 7' Wide Single 3500 lb Drop Leaf Axle Model with Brakes to Single 5200 lb Drop Leaf Axle w/Electric Brakes (6 Lug 22575R15 Radials)

Upgrades the axle capacity from 3500lb to 5200lb, upgrades to larger 6 lug wheel & larger 15” tire

Upgrade a 7' Wide Single 3500 lb Drop Leaf Axle Model with Brakes to Single 5200 lb Drop TORSION Axle w/Electric Brakes (6 Lug 22575R15 Radials)

Upgrades the axle capacity from 3500lb to 5200lb, upgrades to a TORSION axle instead of a drop leaf axle, upgrades to larger 6 lug wheel & larger 15” tire

Upgrade a Single 3500 lb Drop Leaf No Brake (Idler) Axle to 5200 lb Torsion Axle w/Electric Brakes (6 Lug 22575R15 Radials)

Upgrades the axle capacity and to a torsion instead of drop leaf axle, adds electric brakes & safety breakaway, upgrades to larger 6 lug wheel & larger 15”  tire

Upgrade a Single 3500 lb Drop Leaf No Brake (Idler) Axle to a 5200 lb Drop Leaf Axle w/Electric Brakes (6 Lug 22575R15 Radials)

Upgrades the axle capacity, adds electric brakes & safety breakaway, upgrades to larger 6 lug wheel & larger 15” tire

Upgrade From 5200 lb Drop Leaf Tandem Axles to 5,200 lb Tandem Torsion Axles

This option upgrades any 8.5  wide tandem model that comes standard with 5200 lb drop leaf axles to 5,200 lb torsion axles w/6 lug wheels and 15” radials.

Upgrade From 5200 lb Tandem Drop Leaf Axles to 7,000 lb Drop Leaf Axles (w/8 lug 16” Radials)

This option upgrades any 8.5 wide tandem axle model that comes standard with 5200 lb drop leaf axles to 7,000 lb drop leaf axles and upgrades from 6-lug wheels and 15” tires to 8-lug wheels with 16” tires.

Upgrade From 5200 lb Tandem Drop Leaf Axles to 7,000 lb Torsion (w/8 lug 16” Radials)

This option upgrades any 8.5 wide tandem axle model that comes standard with 5200 lb drop leaf axles to 7,000 lb torsion axles and upgrades from 6-lug wheels and 15” tires to 8-lug wheels and 16” tires.

Upgrade From 5200 lb TRIPLE Drop Leaf Axles to TRIPLE 7,000 lb DROP LEAF Axles (w/8 lug 16” Radials)

This option upgrades any 8.5  wide triple 5200 lb model that comes standard with TRIPLE 5200 lb drop leaf axles to TRIPLE 7,000 lb drop leaf axles and upgrades from 6-lug wheels and 15” tires to 8-lug wheels and 16” tires.

Upgrade From 5200 lb TRIPLE Drop Leaf Axles to TRIPLE 7,000 lb Torsion Axles (w/8 lug 16” Radials)

This option upgrades any 8.5  wide model that comes standard with TRIPLE 5200 lb drop leaf axles to TRIPLE 7,000 lb torsion axles and upgrades from 6-lug wheels and 15” tires to 8-lug wheels and 16” tires.

Upgrade from Tandem 3500 lb Drop Leaf Axles to 3,500 Lb Tandem Torsion Axles w/Elect Brakes

Upgrades any model with standard 3500 lb tandem drop leaf  axles with brakes to tandem 3500 lb torsion axles (with elec brakes)

Upgrade from Tandem 3500 lb Drop Leaf Axles to 5,200 Lb Tandem Torsion Axles w/Elect Brakes (6 lug 22575R15 Radials)

Upgrades any model with standard 5 lug 3500 lb tandem drop leaf  axles to 5200 lb torsion axles with 6 lug wheels, larger 15” radial tires

Upgrade Standard 3500 lb 7' Wide Single Drop Leaf Axle Model w/Elec Brakes to 3500 lb Torsion Axle w/Elec Brakes

Upgrades a 7' wide single axle model standard with 3500 lb drop leaf electric brake axle, to 3500 lb torsion electric brake axle.

Upgrade Standard 3500/2990 lb Drop Leaf No Brake (Idler) Single Axle to 3,500/2990 lb Torsion Axle w/ Electric Brakes

Upgrades to the 3500 (rated 2990) torsion axle, with electric brakes and safety breakaway from a single 3500 lb drop leaf no brake (idler) axle model.

Upgrade Standard Single Axle 3500/2990 lb (5 Lug) No Brakes (Idler) Axle to Electric Brakes *REQUIRES 4” FRAME UPGRADE

NOTE: MUST ALSO UPGRADE TO AT LEAST 4” MAIN FRAME. Adds electric brakes, a safety breakaway and 7 pin wiring plug to any single axle no brake (idler) standard 3500 lb (rated 2990) single axle model.

Bathroom SHOWER/SINK ONLY Package-No Toilet-(Minimum 7' Inside Ht Required) *Minimum 6” Main Frame Required

App 4'x6'. Package includes:32” shower, 30 gal fresh water holding tank, 50 gal black water holding tank, water heater,  water pump, hand wash sink in base cabinet, one partition wall with door, 12v light,  GFI wall outlet, finished interior walls, ceiling, floor. NOTE: Only wired to 110V electrical service if purchased separately.

Dog Tub Bath Package (Requires Minimum 6” Main Frame)

Package includes dog tub with sprayer, fresh water and gray water holding tanks, water heater.

Full Bathroom Package w/Shower (Minimum 7' Inside Ht Required) *Minimum 6” Main Frame Required

App 4'x6'. Package includes: 32” x 32” shower, toilet, 30 gal fresh water holding tank, 50 gal black water holding tank, water heater, water pump, hand wash sink in base cabinet, 12v light, power roof vent, GFI wall outlet, one partition wall with door, finished interior walls, ceiling, floor. NOTE: Only wired to 110V electrical service if purchased separately.

Grease Trap (14lb) Added to Holding Tank on A Water Service Purchase

Must purchase water service.

Grease Trap (20lb) Added to Holding Tank on A Water Service Purchase

Must purchase water service.

Half Bathroom Only Package-No Shower-(Minimum 6'6' Inside Ht Required) *Minimum 6” Main Frame Required

App 4'x4'. Package includes: toilet, 30 gal fresh water holding tank, 50 gal black water holding tank, water heater,  water pump, hand wash sink in base cabinet, one partition wall with door, 12v light, power roof vent, GFI wall outlet, finished interior walls, ceiling, floor. NOTE: Only wired to 110V electrical service if purchased separately.

Mop Sink 24”x24”-ADDED (No Water Service)

Add on to any water service purchase.

Single Hand Wash 15”x15”x15” Sink in 24”x24” Base Cabinet (NO Water Service)

This extra sink in a cabinet can be ADDED ON to any water service package purchase. Does not include basic water service pack. Must purchase separately if desired.

Single Hand Wash Sink in 36” Base Cabinet (With Full Water Service)

Includes single hand wash sink in a 36” base cabinet, fresh and gray water holding tanks, water heater, pump, city fill and drain.

Sink Splash Guard ADDED w/Any Sink

Add for any sink purchase.

Urinal ADDED to Full or Half Bath Package

If ordering a full or half bath package, you can add this wall urinal that includes braced up wall.

Base & Overhead Cabinets Combo Across Front Wall (Flat or V-Nose) Any 8.5 Wide Model

Use if you want base and overhead cabinets installed across the front wall of your 8.5 wide trailer. Standard in white or you can select any standard metal color. NOTE Cannot be added on a slat top V or rounded V.

Base Cabinet 36” Tall w/Doors-Per Foot (Minimum 3')

If you only want base cabinets choose this option and change quantity in cart to total number of feet of base cabinet you desire. Normally installed across the front wall of a trailer but can be placed at your location choice. Metal white or any standard metal color.

Pull Out Drawer(s) ADDED in Base Cabinet-*Must first add 3' of base cabinet (per each drawer)

First you must add 3' of base cabinet to hold drawer(s). Then choose this option to add drawer(s) in the 3' wide base cabinet. Price is for each drawer, change quantity in cart to desired number of drawers you want in the 3' wide base cabinet, normally 3 or 4 drawers.

Shelf 12” Deep w/Fold-down Brackets-Metal Wrapped ($54 Per Foot-Minimum 3')

Metal wrapped 12” deep shelf/counter on fold down brackets. Add to cart then change quantity to length you desire.

Shelf 18” Deep w/Fold-down Brackets-Metal Wrapped ($64 Per Foot-Minimum 3')

Metal wrapped 18” deep shelf/counter on fold down brackets. Add to cart then change quantity to length you desire.

Shelf 24” Deep Plywood w/Lip Edge-Wall Mounted ($34 per foot) Minimum 3'

Add 24” deep plywood shelf w/lip edge at your wall location. Price is per foot. Add to cart then change cart to your desired shelf length(s).

Shelf Across Depth of Any Size V-Nose Model-Plywood Shelf w/Lip Edge

Add one shelf across front of any V-nose model at your desired height.

Shelf/Counter 12” Deep-Metal Wrapped on Stationary Legs (Min 3') $44 per foot

Choose this if you want a stationary shelf/counter inside any trailer. Your choice wall location. Add to cart then change quantity in cart to desired length.

Shelf/Counter 18” Deep-Metal Wrapped on Stationary Legs (Min 3') $54 per foot

Choose this if you want a stationary 18” deep shelf/counter inside any trailer. Your choice wall location. Add to cart then change quantity in cart to desired length.

Steps & Base Cabinets Built-In Across The Inside Bottom of Riser Wall on Any Gooseneck Model

This will add both built in base cabinets and steps across the bottom of riser for cabinet storage and easy inside access up into the riser area on a gooseneck model.

Steps ONLY Built-In to Access Inside Riser Area on Any Gooseneck Model

This will add steps for your easy inside access up into the riser area on a gooseneck model.

Upper Cabinet w/Doors-Per Foot (Minimum 3')

If you only want upper cabinets choose this option and change quantity in cart to total number of feet of upper cabinet you desire. Normally installed across the front wall of a trailer but can be placed at your location choice. Metal white or any standard metal color. Minimum order is 3'

Complete Concession Water Service & Sinks Package (TA Models Only-Requires Min 6” Main Frame)

NOTE: On models with 4” main frame standard, you must also purchase the separate upgrade to 6” or 8” Main Frame. This Water and Sinks Package includes: Base cabinet with 2 doors, stainless triple dish wash sinks, separate stainless single hand wash sink, 30-40 gal fresh water tank (mounted inside under cabinet) 40-50 gal Gray water holding tank (mounted under trailer), electric water heater, water pump, GFI 110V outlet, city fill and waste outlets. (110V electrical service panel must be purchased separately, if desired.)

Exterior Appearance Decor Package (Any Single Axle Model)

Package includes: ”V-look” slanted front stoneguard on V-nose model, 12” tall ATP bottom trim around sides and rear, ATP fenders.

Exterior Appearance Decor Package (Any Tandem Axle Model)

Package includes: ”V-look” slanted front stoneguard on V-nose model, 12” tall ATP bottom trim around sides and rear, ATP fenders.

Exterior Appearance Decor Package (Any Triple Axle Model)

Package includes: ”V-look” slanted front stoneguard on V-nose model, 12” tall ATP bottom trim around sides and rear, ATP fenders.

Motor Base Plug 15 AMP w/One 110V Inside Outlet-Packaged (For Standard 3-Prong 110V Power)

Choose this to add a 15 AMP motor base standard electrical plug on the outside wired to one 110V inside wall outlet. Add this to be able to plug 110V power from an outside power source using a regular 3-prong extension cord. (cord not included). Gives you 110V power in the inside wall outlet. Add more outlets if desired.

Motorcycle Ready-to-Haul Decor Package (For Single Axle Trailers Any Length )

Package Includes: 24” tall ATP around all sides and rear, ATP rear corner posts, ATP fenders. One pair rear fold down stabilizer jacks.  Aluminum Split Spoke Mag Wheels. Six flush mount floor D-ring tie-downs welded to frame evenly spaced 3 each side front to rear.

Motorcycle Ready-to-Haul Decor Package (For Tandem Axle Trailers Up to 18' Long)

Package Includes: 24” tall ATP around all sides and rear, ATP rear corner posts, ATP fenders. One pair rear fold down stabilizer jacks.  Aluminum Split Spoke Mag Wheels. Six flush mount floor D-ring tie-downs welded to frame evenly spaced 3 each side front to rear.

3' H x 4' L Concession Serving Window w/ Slider Screen & Deluxe Concession Door

Sliding serving window with the 3 x 4 Deluxe Concession Locking Door and door is included in price. (Blackout trailers must add blackout trim on concession door separately)

3' H x 5' L Concession Serving Window w/ Slider Screen & Deluxe Concession Door

Sliding serving window with the 3 x 5 Deluxe Concession Locking Door and door is included in price. (Blackout trailers must add blackout trim on concession door separately)

3' H x 6' L Slider Serving Window w/Slider Screen & Deluxe Concession Door

Serving window fits the 3 x 6 Deluxe Concession Door and the door is included in the price. (Blackout trailers must add blackout trim on concession door separately)

3' H x 8' L Slider Serving Window w/Slider Screen & Deluxe Concession Door

Serving window fits the 3 x 8 Deluxe Concession Door and the door is included in the price. (Blackout trailers must add blackout trim on concession door separately)

4' H x 6' L Slider Serving Window w/Slider Screen & Deluxe Concession Door

Fits the 4 x 6 Deluxe Concession Door and the door is included in the price. (Blackout trailers must add blackout trim on concession door separately)

4' H x 8' L Slider Serving Window w/Slider Screen & Deluxe Concession Door

Serving window fits the 4 x 8 Deluxe Concession Door and the door is included in the price. (Blackout trailers must add blackout trim on concession door separately)

Blackout Concession Door ”Add Blackout Trim” (Any Size Door) For Blackout Trailer

If you order a blacked out exterior trailer with a concession door, must also add this blackout trim for the concession door or it will be aluminum finish.

Deluxe HD 3' H x 6' L Concession Door Only w/gas shocks, locking latches

Placed in your location choice. (Blackout trailers must add blackout trim on concession door separately)

Deluxe HD 3' H x 8' L Concession Door Only w/ gas shocks, locking latches

Placed in your location choice. (Blackout trailers must add blackout trim on concession door separately)

Deluxe HD 3' X 4' Concession Door Only w/Gas Shocks, Locking Latches

Placed in your location choice. (Blackout trailers must add blackout trim on concession door separately)

Deluxe HD 3' X 5' Concession Door Only w/Gas Shocks, Locking Latches

Placed in your location choice. (Blackout trailers must add blackout trim on concession door separately)

Deluxe HD 4' H x 6' L Concession Door Only w/ gas shocks, locking latches

Placed in your location choice. (Blackout trailers must add blackout trim on concession door separately)

Deluxe HD 4' H x 8' L Concession Door Only w/gas shocks, locking latches

Placed in your location choice. (Blackout trailers must add blackout trim on concession door separately)

Double Access Doors Under Any Concession Door

This option adds double access doors under any concession door.

Exterior Metal Covered Fold Down Concession Condiment/Serving Shelf ($64 per foot)

Sold by the foot. Add to cart then update cart to number of feet you want the shelf. Example: 6' long serving window would normally need 6' long fold down shelf under it on the outside.

Marquee Sign Fold Up/Down ADDED on Any Concession Door

This option adds a marquee fold up/down on top of any concession door. (photo for illustration purposes, actual may vary)

Shelf 12” Deep w/Fold-down Brackets-Metal Wrapped ($54 Per Foot-Minimum 3')

Metal wrapped 12” deep shelf/counter on fold down brackets. Add to cart then change quantity to length you desire.

Shelf 18” Deep w/Fold-down Brackets-Metal Wrapped ($64 Per Foot-Minimum 3')

Metal wrapped 18” deep shelf/counter on fold down brackets. Add to cart then change quantity to length you desire.

Shelf 24” Deep Plywood w/Lip Edge-Wall Mounted ($34 per foot) Minimum 3'

Add 24” deep plywood shelf w/lip edge at your wall location. Price is per foot. Add to cart then change cart to your desired shelf length(s).

Shelf Across Depth of Any Size V-Nose Model-Plywood Shelf w/Lip Edge

Add one shelf across front of any V-nose model at your desired height.

Shelf/Counter 12” Deep-Metal Wrapped on Stationary Legs (Min 3') $44 per foot

Choose this if you want a stationary shelf/counter inside any trailer. Your choice wall location. Add to cart then change quantity in cart to desired length.

Shelf/Counter 18” Deep-Metal Wrapped on Stationary Legs (Min 3') $54 per foot

Choose this if you want a stationary 18” deep shelf/counter inside any trailer. Your choice wall location. Add to cart then change quantity in cart to desired length.

Single Access Door Under Any Concession Door

This option adds a single access door under any concession door.

Add 24” Tall Expanded Metal on Side Rails on a Hybrid Open Rear Flatbed Deck ($44 Per Foot of Deck)

All hybrid models are standard with 18” tall open side rails on rear flatbed deck. Choose this option if you want to add open steel 24” tall side rails covered i expanded metal around the open deck area. Add to cart and then UPDATE cart to the number of feet you want converted to your open flatbed deck.

Add 36” Tall Expanded Metal on Side Rails on a Hybrid Open Rear Flatbed Deck ($84 Per Foot of Deck)

All hybrid models are standard with 18” tall open side rails on rear flatbed deck. Choose this option if you want to add open steel 36” tall side rails covered in expanded metal around the open deck area. Add to cart and then UPDATE cart to the number of feet you want converted to your open flatbed deck.

Add Double Rear Doors on Enclosed Box Area on a Hybrid Open Rear Flatbed Deck

Choose this option if you want to add double rear barn swing open doors on the back of the front box area.

Convert Any Model to Hybrid Open Rear Deck Flatbed-Bed Length of Your Choice ($194 per foot)

Choose this to convert any length of your trailer to a hybrid model, with open rear flatbed deck. This doesn't add any length to a trailer, only converts rear length to open flatbed length of your choice. Includes: 4' rear ramp gate, 18” tall open side rails, 2x6 boards on deck area. NOTE: Add to cart and change quantity in cart to length of the open deck you desire.

Convert to Any Length Rear Open Covered Porch Area w/36” Tall Open Rails/Gate (7 or 8.5 Wide Models Only)

Choose this to convert the rear to an open porch area length of your choice. Note: This does NOT add any length to your trailer, it only converts length of your trailer to an open porch area with roof. (Reduces inside box area by length of the porch you choose). Includes 36” tall open side rails, a swing walk through side gate and a removable rear gate. Comes standard with plywood floor. Upgrade available to treated 2x6 porch floor, if desired.

Deck-over UPGRADE Conversation on 8.5 Wide Model-Available on Any Length 8.5 Wide Bumper Pull or Gooseneck

Choose this option if ordering any length 8.5 wide model and you want the deck level (floor) to be over the top of the wheels. This raises the ground clearance by an additional approximately 8” higher than the standard 8.5 wide models, to about 25” of ground clearance.

Expanded Metal (mesh) ADDED on Side Rails of Porch ($74 per foot)

If buying a porch with 36” tall open side rails, choose this if you want expanded metal (mesh) over the side rails. Add to cart and change quantity to number of feet of length of your porch.

Solid Metal ADDED on Side Rails of Porch ($44 per foot)

If buying a porch with 36” tall open side rails, choose this if you want solid metal over the side rails. Add to cart and change quantity to number of feet of length of your porch.

Upgrade Any Rear Porch Floor Area to .063 HD ATP Covered 3/4” Plywood ($64 Per Foot of Porch Area)

Rear porch models come standard with 3/4” raw plywood floor. Choose this option to cover the porch floor area in HD .063  aluminum treadplate (ATP). Add to your cart then UPDATE cart to the number of feet you want to convert to your rear porch area.

Upgrade Rear Open Deck Area on Hybrid Model to Steel Treadplate Floor ($115 per foot)

Choose this option if you are ordering a hybrid model and want to upgrade open deck area floor from standard 2x6 boards to steel treadplate. Add to cart and then change quantity in cart to length of hybrid deck you are ordering.

Upgrade Rear Porch Floor Model to 2x6 Boards (Recommended) $35 Per Foot

Choose this option if you are ordering a rear porch model to upgrade from the standard plywood to 2x6 boards. Add to cart and then UPDATE your cart to how many feet of your trailer you want to convert to a rear covered porch.

UPGRADE to 6' Tall Steel Expanded Metal (Mesh) Load Ramp Gate on Any Hybrid Open Rear Deck Trailer

Standard hybrid trailer with open flatbed deck comes standard with a 4' tall rear gate. . Choose this option to upgrade to a 6' tall rear gate.

4” Square Kingpin Coupler Change on Any Gooseneck ILO Standard 2-5/16” Ball Gooseneck Coupler

This option will change to 4” square king pin coupler on any gooseneck. All gooseneck models come standard with a 2-5/16' ball goose-neck coupler.

54” Extended Triple Tube Tongue-Any Width Model

Adds about 6” to standard tongue length-also adds third center tube for more stability-extra length helps reduce risk of swaying and jackknifing.

5th Wheel Coupler Change on Any Gooseneck ILO Standard 2-5/16” Ball Gooseneck Coupler

This option will change to a 5th wheel coupler on any gooseneck. All gooseneck models come standard with a 2-5/16' ball goose-neck coupler.

60” Extended Triple Tube Tongue-Any Width Model

Adds about 12” to standard tongue length-also adds third center tube for more stability-extra length helps reduce risk of swaying and jackknifing.

66” Extended Triple Tube Tongue-Any Width Model

Adds about 18” to standard tongue length-also adds third center tube for more stability-extra length helps reduce risk of swaying and jackknifing.

72” Long Extended Triple Tube Tongue-Any Width Model

Longest tongue available. Adds about 24”. Also adds third center tube for more stability-extra length helps reduce risk of swaying and jackknifing.

ATP Covered Tongue A-Frame Area

Cover built in over the shape of A-frame tongue, plywood covered in ATP.

Generator ATP Covered 36” x 36” Storage Box On Tongue-Requires Adding 24” Extended Triple Tube Tongue Option (Flat Front Models or 24” Extended Tongue on V-nose Model)

REQUIRES adding your choice of the 24” extended triple tube tongue option separately. Generator box is mounted on tongue, flat front models only. Must add generator slide out platform tray separately, if desired

Generator Platform On Tongue (Requires Extended Triple Tube Tongue Upgrade)

This is a platform built on tongue, constructed with steel frame, plywood insert, covered in ATP. Depending on how big you want the platform, you must also purchase an extended tripe tube tongue.

Removable/Detachable Tongue (Only Available on Standard Length Tongues- Flat Front)

Tongue is made to completely detach from trailer frame when parked. Includes a pair of scissor jacks on front corners of trailer to support trailer when tongue is removed. NOTE: Cannot be used on any models with extended tongue option and must be a flat front model, not available on a V-nose model.

Triple Tube ADDED to Standard Length Tongue-Any Width Model (No Tongue Length Added)

Adds third center tube for more stability.

Upgrade a Standard Stationary Coupler to a ”Pintle Government Style” Adjustable Height Coupler (Any Size)

Upgrades any standard coupler to the  pintle ring government style and adjustable height coupler. Also will get the standard ball coupler loose in trailer.

Upgrade a Standard Stationary Coupler to a 2-5/16” ”Bull Dog” Style Adjustable Height Coupler

Upgrades any standard coupler to the  2-5/16 ”Bull Dog” style and adjustable height coupler

Upgrade a Standard Stationary Coupler to Adjustable Height & Switchable Pintle & 2-5/6” Ball Coupler

Upgrades any standard coupler to an adjustable height, switchable between a pintle ring government style and 2-5/16” ball coupler.

Upgrade from 2” to 2-5/16” Standard Ball Coupler

Increase from a standard 2” latch coupler on single axle models to the 2-5/16” standard latch coupler

Upgrade to Adjustable Height 2-5/16” Coupler (Any Model)

Upgrade from a standard 2” or 2-5/16” stationary coupler to an adjustable height 2-5/16” coupler on any bumper pull model.

54” x 48” Escape Door in a Gull Wing Side (if you want mounted in a gull wing lift-up side)

Choose this option if you are also buying a gull wing lift-up trailer side, and you want an escape door in the gull wing side.

54” x 48” Escape Door in Standard Side Wall (normally used on car hauler trailers)

Usually mounted driver side over wheels on 8.5 wide. Can be placed your location.

Access Door w/Key Lock-24” x 24”

Your placement choice.

Baggage Access Door w/Key Lock-36” x 36”

Your placement choice.

Cable/Fuel Access Door 12” x 12”

Add to your desired location.

Generator ATP Covered 36” x 36” Storage Box On Tongue-Requires Adding 24” Extended Triple Tube Tongue Option (Flat Front Models or 24” Extended Tongue on V-nose Model)

REQUIRES adding your choice of the 24” extended triple tube tongue option separately. Generator box is mounted on tongue, flat front models only. Must add generator slide out platform tray separately, if desired

Generator Platform On Tongue (Requires Extended Triple Tube Tongue Upgrade)

This is a platform built on tongue, constructed with steel frame, plywood insert, covered in ATP. Depending on how big you want the platform, you must also purchase an extended tripe tube tongue.

Generator Slide-Out Platform Tray (add to a generator storage box)

This is a platform tray is on slides that allows you to slide your generator in and out more easily. For use only with purchase of an interior or exterior generator box compartment that must be purchased separately.

Generator Storage Box-Half Inside/Half Outside Compartment On Front-Includes Slider Tray

This is a generator storage box mounted half-way inside the trailer and halfway outside the trailer, standard on driver side of V-nose model. Price includes storage box and slider tray.

Generator Vented Access Door Only 36” x 36”

This is a vented door only, for your access to inside your trailer. Your location placement choice.

Removable Fender Well Box w/Lift-Up Side ”Wing” Door & Step (Tandem Axle 8.5 Wide Only)

This allows you to lift the entire side of the trailer up that's over the fender well area and remove the fender well box. Has a built-in step for easy exit.

Removable Fender Well Box w/Lift-Up Side ”Wing” Door & Step (TRIPLE Axle 8.5 Wide Only)

This allows you to lift the entire side of the trailer up that's over fender well area and remove the fender well box. Has a built-in step for easy exit.

3' Long Aluminum Flap UPGRADE on Any Ramp Door w/Eedges & Big Bumpers

Upgrade from the standard 16” plywood flap. Makes an easier roll up from ground onto the ramp door. Extra long 3' aluminum flap. Includes wedges and bigger rubber bumpers

Add 36” Wide Spring Assist Ramp Load Door in V-Nose

Available on any model 7' or  8.5' wide, placed on either side of V nose.

Add 36” Wide Spring Assist Ramp Load Door on Side

Available on any model 6' wide to 8.5' wide, placed on either side, your choice location.

Add 48” Wide Spring Assist Ramp Load Door in Extended V-Nose Front

Only available on 7' or 8.5 wide models placed in either side of V-nose front. Price includes the required extended V-Nose and triple tube tongue.

Add 48” Wide Spring Assist Ramp Load Door on Side

Available on any model 6' wide to 8.5' wide, placed on either side, your choice location.

Add 60” Wide Spring Assist Ramp Load Door in Extended V-Nose Front (8.5 Wide Only)

Only available on 8.5 wide models placed in either side of V-nose front. Price includes the required extended V-Nose and triple tube tongue.

Add 60” Wide Spring Assist Ramp Load Door on Either Side Only

Can be placed on either side (your location choice) on any 6' wide or wider model.

Add 72” Wide Spring Assist Ramp Load Door on Either Side Only

Can be placed on either side (your location choice) on any 7' wide or wider model.

Add a 24” x54” Side Entry Door w/Flush Key Lock

Normally added on a 5' wide model that does not come standard with a side door. You can add to any trailer model. Your location choice.

ADD a 36”x75” RV Door w/Window and Screen Door

This option is to add a separate 36”x75” RV style door with key lock, with a window in door and a screen door. Photo for illustration purposes only, door design may vary.

Add an Extra 32”x68” Side door w/Flush Key Lock

Add to any trailer model with at least 6'3” inside height. Your choice location.

Add an Extra 32”x75” Side door w/Flush Key Lock

Add to any trailer model with at least 7' inside height. Your choice location.

Add an Extra 36”x 75” Side Door w/Flush Key Lock

Add to any trailer model with at least 7' inside height. Your choice location

Add an Extra 48” x 75” Side Door w/Flush Lock

Add to any trailer model with at least 7' inside height. Your choice location.

Add Bar Lock for Padlock on Any Standard Side Door w/Flush Key Lock

All Quality Cargo trailers with side doors standard come with an RV style flush key lock. Add this bar lock to use with a pad lock for a extra security, if desired.

Aluminum Tread Plate (ATP) on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood door and flap.

Aluminum Tread Plate On Ramp Door & Flap (Any Width Model)

Installed over plywood on door and flap.

Aluminum Treadplate on a Ramp Door & Flap- Any Width Trailer

Installed over the plywood on any ramp door (also installed on flap end)

ATP Transition Flap Between Ramp Door & Floor (Covers Hinges)

Adds a hinged cover flap to make easier roll over between ramp door and trailer floor, any width model.

Barn Rear Door EXTRA PAIR of HINGES (price per each pair)

If ordering a trailer with double rear barn doors, this will add one extra pair of hinges for more door support, if desired.

Barn Swing Double Rear Doors Instead of Standard Ramp Rear Door (6', 7', 8.5' Wide Models) CHANGE FEE ONLY

Change to double barn swing rear doors instead of the standard spring assisted ramp rear door on 6', 7', 8.5' wide model.

Barn Swing Double Rear Doors on Any 5' Wide Model ILO Single Swing Door (Change Fee)

Change to double barn swing rear doors instead of the standard single swing barn door on all 5' wide models. Change fee.

Black and White Checkered Vinyl on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood door and flap.

Double Spring Assist Added on 7 Wide or 8.5 Wide Rear Ramp Door Model

All ramp door models come with one spring assist on the rear ramp door and this is usually fine for most models. If ordering a trailer with 18” or more extra height, especially an 8.5 wide model, this double spring assist option is REQUIRED, for easier raising and lowering of the heavier, taller ramp door. NOTE: If upgrading to the ”Super Duty” ramp door the double spring assist is standard on that door.

Move a Standard Side Door to the REAR In a SOLID WALL ILO Ramp Door (6', 7', 8.5' Wide Models)

ILO a standard rear ramp door. Choose this option if you want to relocate the standard side door from the side of trailer to be mounted in a solid rear wall across the rear of the trailer.

Move a Standard Side Door to the V-Nose Front on Curbside (6', 7', 8.5' Wide Models))

Choose this option if you want to relocate the standard side door from the side of trailer to the front V-nose on curbside.

Partition Wall POCKET DOOR Added

Add this to any partition wall purchase. Door opening will be as wide as possible based on width of trailer.

Ramp Door ”Race Flap” Upgrade-36” Plywood w/Aluminum Struts/Larger 3” Door Bumpers (8.5 Wide Only)

This will upgrade from the standard plywood 16” flap included on the ramp door. 36” plywood flap with aluminum struts supports and door will have the larger 3” rubber bumpers.

Ramp Door Electric Winch w/Battery (Recommended on Ramp Doors 8'6” or Taller)

You should add the double spring assist option to a taller regular or heavy duty ramp door, (double spring assist is standard on the Super Duty ramp door upgrade. If your standard or heavy duty ramp door will be 8'6” tall or taller, consider upgrading to the super duty ramp door, or you might consider adding this ramp door electric winch option due to the extra weight of the taller ramp door.

Ramp Rear Door EXTRA HINGE (price per each)

If ordering a trailer with a rear ramp door, this will add one extra hinge for more door support, if desired. NOTE: 5', 6. 7. wide ramp door models are standard with two (2) door hinges. 8.5 wide models are standard with three (3) door hinges.

Rear Ramp Door WIDER Opening to Approx 94-1/2” (8.5 Wide Models Only)

Choose this option if you need to add maximum width to the rear ramp door an any 8.5 wide model. Adding this option will WIDEN the rear ramp door to about 94-1/2 inches. Note: Standard width rear ramp door is about 90-1/2” so this option adds about 4” more rear door width. Allow for  small variance, exact width NOT guaranteed.

Removable Fender Well Box w/Lift-Up Side ”Wing” Door & Step (Tandem Axle 8.5 Wide Only)

This allows you to lift the entire side of the trailer up that's over the fender well area and remove the fender well box. Has a built-in step for easy exit.

Removable Fender Well Box w/Lift-Up Side ”Wing” Door & Step (TRIPLE Axle 8.5 Wide Only)

This allows you to lift the entire side of the trailer up that's over fender well area and remove the fender well box. Has a built-in step for easy exit.

Rubberized Black Treadplate on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood on ramp door and flap.

Steel Transition Flap Between Ramp Door & Floor (Covers Hinges)

Adds a hinged SYEEL cover flap to make easier roll over between ramp door and trailer floor, any width model.

Step-All Aluminum Low Profile Pull-out Side Door Step

Add under any size side door. All aluminum construction.

Upgrade 5' Wide Model to Ramp Rear Door (Standard w/ Single Swing Barn Door)

Any 5' wide model comes standard with a single swing rear barn door. Choose this option to upgrade the rear door to a ramp door.

Upgrade a Standard 32” Side Door to 36”

Upgrade any model with a standard 32” side door to a 36” door. Must be long enough model for wider door to fit in front of fenders.

Upgrade a Standard 32” Side Door to 48”

Upgrade any model with a standard 32” side door to a 36” door. Must be long enough model for wider door to fit in front of fenders.

Upgrade a Standard 36” Side Door to 48”

Upgrade the 36” standard side door to a 48” (Must be long enough model to accommodate 48” door width in front of fenders)

UPGRADE from a Standard 32” or 36” Side Door to 36”x75” RV Door w/Window and Screen Door

This option is to upgrade from the standard side door to a 36”x75” RV style door with key lock, with a window in door and a screen door. Photo for illustration purposes only, door design may vary.

UPGRADE from a Standard 32” or 36” Side Door to 60” Double Barn Side Doors (Must be long enough model)

This option is to upgrade from the standard side door to 60” wide double barn doors, but trailer must be long enough to accommodate 60” width.

Upgrade Standard or HD Ramp Door to SUPER Duty (4500# capacity) Ramp Door (7'or 8.5 Wide TA Only)

Upgrade from standard 2000# capacity or HD 4500# capacity rear ramp door on any 7' or 8.5 wide models. This door upgrade includes the double spring assist option.

Upgrade Standard Ramp Door (2000# capacity) to Heavy Duty (4500# capacity) Ramp Door (6' or 7' Wide Only)

Upgrade from standard 2000# capacity rear ramp door w/flap standard on any 6'or 7' wide model, to HD 4500# capacity ramp door w/flap. Note: This HD ramp door w/flap comes standard on any 8.5 wide model.

100 AMP Complete Electrical Package

NOTE: All wiring MC metal covered cable to pass code. Package includes: breaker panel box, 100 AMP service, 50 AMP lifeline cable, exterior 50 AMP motor base plug, two 110V interior wall receptacles, two 4' 110v LED ceiling lights w/one switch. NOTE: Ceiling liner of your choice must be purchased separately or wiring will be exposed in ceiling.

30 AMP Complete Electrical Package

NOTE: All wiring MC metal covered cable to pass code. Package includes: breaker panel box, 30 AMP service, 30 AMP lifeline cable, exterior 30 AMP motor base plug, two 110V interior wall receptacles, two 4' 110v LED ceiling lights w/one switch. NOTE: Ceiling liner of your choice must be purchased separately or wiring will be exposed in ceiling.

50 AMP Complete Electrical Package

NOTE: All wiring MC metal covered cable to pass code. Package includes: breaker panel box, 50 AMP service, 50 AMP lifeline cable, exterior 50 AMP motor base plug, two 110V interior wall receptacles, two 4' 110v LED ceiling lights w/one switch. NOTE: Ceiling liner of your choice must be purchased separately or wiring will be exposed in ceiling.

110 Volt 15 AMP Interior Receptacle (Each)

Not wired unless any electrical package is also purchased.

110 Volt 20 AMP Interior Receptacle (Each)

Not wired unless any electrical package is also purchased.

110 Volt Wire Stub & Switch for After-Market Exterior Light Installation (Light Not Included)

When also purchasing an electrical package, choose this to have a wire & switch stubbed in for your after-market exterior light installation.

110 Volt Wire Stub & Switch for Your After-Market Use (Stubbed to Your Inside Location)

When also purchasing an electrical package or at least a panel box, choose this to have a 110v wire stub tied to a switch and connected to your panel box for you to add your after-market electrical item. Wire stub will be ran to your specified interior location.

110V (AC) to 12V (DC) Converter-45 AMP DC

If purchasing an electric package, you can also add this converter, and a deep cycle 12v battery, if desired.

110v 4' LED Ceiling Light Fixture (One)

Add one 4' LED light. (must purchase electrical package to be wired)  Note: Two of these lights are included in any electric package purchased.

110V Exterior or Interior Wall Receptacle (GFI)

Not wired unless an electrical package is also purchased.

12V Battery Storage Compartment-RECESSED in Floor (Requires 6”-8” Frame) Battery Purchased Separately

This is a storage compartment for your after-market battery install, or if you also order a battery separately it will be installed in this floor compartment.

12V On Board Power Supply (12V Battery in Vented Box Mounted Inside)

This gives 12V power wired to all your 12V items. Deep cycle 12v battery is in a vented plastic box mounted inside front of trailer.

12V Side Blinker Lights (one pair)

Will add a blinker light on each side of trailer.

12V Wire Stub-Out w/Switch (for after-market use)

Add as many 12V stub-out wires as you desire, wired to the 12V power supply purchased separately.

220V Wall Outlet (Can Furnish Your Plug Configuration)

Add a 220V wall outlet. Must also purchase 100 AMP electrical package or at least a panel box for this outlet to be wired to panel box. Outlet can be placed at your desired location. Will be a standard 220V plug unless you send details of your desired plug configuration.

Add Extra 12 Volt LED Interior Dome Light (each)

This option adds extra 12v interior dome light. All models come with one dome light & switch standard. You may add as many in your cart as you choose and they will be evenly spaced front to rear.

Back Up Lights (Available any model with electric brakes & 7-pin round harness)

Requires the 7-pin round pigtail standard on any model that has electric brakes.

Dedicated 20 AMP Breaker (each)

Price is for each dedicated 20 AMP breaker you want dedicated to one wall outlet. (110v outlets are purchased separately). You must purchase how many dedicated breakers and specify to what outlets you want dedicated.

Electric Tongue Jack (3000#) w/12V Battery

Photo for illustration purposes only, brand and style may vary. Installed in place of standard manual tongue jack on any bumper pull model

Electric Tongue Jack (5000#) w/12V Battery

Photo for illustration purposes only, brand and style may vary. Installed in place of standard manual tongue jack on any bumper pull model

Extra LED Running Lights (Includes 1-pair of red or amber) for 8.5' Wide Models

Adds one extra pair of side running lights (one light on each side of trailer). Red will be added on rear half of trailer, amber on front half. Add in your cart by the pair, change quantity in cart to how many extra pair you want to add. Specify color you desire in your checkout notes. Example: If you order 2 pair & specify one pair red, one pair amber.

Extra Pair LED Strip Tail Lights

All models come standard with one pair LED strip tail lights. This option will add a second pair.

Motor Base Plug 15 AMP w/One 110V Inside Outlet-Packaged (For Standard 3-Prong 110V Power)

Choose this to add a 15 AMP motor base standard electrical plug on the outside wired to one 110V inside wall outlet. Add this to be able to plug 110V power from an outside power source using a regular 3-prong extension cord. (cord not included). Gives you 110V power in the inside wall outlet. Add more outlets if desired.

Motor Base Plug Only-30 AMP (On Outside Wall)

Choose this to add a 30 AMP motor base electrical plug on  outside. NOTE: Included in 30 AMP electrical package.

Motor Base Plug Only-50 AMP (On Outside Wall)

Choose this to add a 50 AMP motor base electrical plug.NOTE: Included in 100 AMP and 50 AMP electrical packages

Rear 12V Exterior Load Light (each)

Mounted on outside rear of trailer. Add one or more to your cart.

Scene Light-LED Angled Surface Mounted Race Light on Exterior

Add on exterior wall at your location choice.

12” High Aluminum Tread Plate Sides/Rear ($12 PLF) 

Aluminum tread plate design 12” high around all sides and rear. Calculated at per foot x length of any width model.

12” High Anodized (Smooth) Aluminum on Sides/Rear ($12 PLF)

Smooth anodized aluminum finish 12” high around all sides and rear. Calculated at per foot x length of any width model.

24” High Aluminum Tread Plate Sides/Rear (Per Linear Ft) 

Aluminum tread plate design 24” high around all sides and rear. Calculated at per foot x length of any width model.

24” High Anodized, ATP or Colored Metal Sides/Rear ($18 PLF) 

Calculated at per foot x length of any width model.

24” High BLACK ATP Sides/Rear ($24 PLF) 

BLACK Aluminum tread plate (ATP) design 24” high around all sides and rear. Calculated at per foot x length of any width model.

3” Bottom Trim w/DOT Tape ADDED to Any Size up to 24' Long (Standard on 26' & Longer) $10 PLF

NOTE: this is standard on 26' and longer models. Adds wider bottom trim and DOT reflector tape on bottom. Price calculated at per liner foot x length of trailer.

8” High Anodized (Smooth) Aluminum on Sides/Rear ($10 PLF)

Smooth anodized aluminum finish 8” high around all sides and rear. Calculated at per foot x length of any width model.

Add Aluminum Tread Plate (ATP) Metal Rear Corner Covers on Any Model

Can be added on any model.

Add Anodized (Smooth) Aluminum Strip Separating Colors on Any 2-Color Combo Exterior

When purchasing any two color combo model, add this decorative anodized (smooth) aluminum divider strip as a separator between the two colors. Otherwise, the two colors of metal will meet together.

Add Anodized (Smooth) Metal Front Corners on Any Size V-Nose (comes standard on 8.5 wide V-Nose models)

Choose this option to add smooth front corner covers on any width V-Nose model.

Add Anodized (Smooth) Metal Rear Corner Covers on Any Model

Can be added on any model.

Add ATP Metal Front Corners on Any 5', 6', 7' Wide V-Nose Model

Choose this option to add ATP front corner vertical covers on any 5., 6', 7, wide V-Nose model.

Blackout Package Upgrade All Black Trim-Any Trailer ($21 PLF)

Any trailer can be built with the trim in all black as a ”blackout model” and also standard black steel wheels are included with the blackout package. You can blackout the trim on any exterior metal color.

Flat Front Instead of Standard V-Nose Front-All Models (Free Change)

This is a no charge change for any width model.

Rear Winged Top-NO LIGHTS-Any Width Model

Add this option for a rear wing top with NO lights in wing,  on any model. Pictured with the optional blackout package sold separately.

Rear Winged Top-w/10” Lights-Any Width Model

Add this option for a rear wing top with lights in wing on any model. Pictured with the optional blackout package sold separately.

Roll Cast Front Cap Corners (8.5 Wide Models-Flat Front Only)

Add Roll Cast Front Cap Corners to 8.5 Wide Model (Flat Front Only)

Slant Top V on Any V-Nose Model

This option will slant the roof top on any standard V-nose model.

Upgrade 6' or 7' Wide Tandem Axle Model to Aluminum Tread Plate ATP Tear Drop Fenders

Upgrades a tandem axle model from standard smooth fenders to ATP tread plate fenders

Upgrade Any Single Axle Model to Aluminum Tread Plate (ATP) Fenders

Upgrade any single axle model to ATP aluminum tread plate fenders instead of the standard smooth aluminum fenders.

Upgrade Bumper Pull Model to .080 PolyCor Exterior (Aluminum on Thermoplastic Core) $29 PLF (Limited Colors)

Aluminum Tread Plate (ATP) on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood door and flap.

Aluminum Tread Plate Floor-Any Width Model ($36 Per Linear Foot) 

Installed over standard plywood floor. Calculated by the x length of trailer on any width model

Aluminum Tread Plate On Ramp Door & Flap (Any Width Model)

Installed over plywood on door and flap.

Black and White Checkered Tile Vinyl Floor ($35 Per Linear Foot)

Installed over plywood floor. Calculated x length on any width model.  

Black and White Checkered Vinyl on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood door and flap.

Car Runners-18” Wide ATP on Floor over Plywood (Pair) $15 PLF

Installed one on each side of trailer in standard location. Price calculated x length of trailer.  

Car Runners-24” Wide ATP on Floor over Plywood (Pair) $18 PLF

Installed one on each side of trailer in standard location. Price calculated x length of trailer.  

Car Runners-30” Wide ATP on Floor over Plywood (Pair) $21 PLF

Installed one on each side of trailer in standard location. Price calculated x length of trailer.  

Carpeted Floor-Black Indoor/Outdoor on Floor ($44 Per Linear Foot)

Installed over plywood floor. Calculated x length on any width model.  

Dark Gray Marble Design Vinyl Floor ($35 Per Linear Foot)

Installed over plywood floor. Calculated x length on any width model.  

Double 3/4” Plywood Floor Deck (1-1/2”)-Any Width Model ($26 PLF)

Choose this option to double the standard 3/4” plywood floor for added strength and durability. Price is calculated per linear foot x length of any width model.

Ramp-overs for Driving Over Interior Wheel Well Boxes (8.5 Wide Models Only) $165 PLF

Wheel well ramp-overs, one on each side inside the trailer to drive a vehicle up and over the top of the steel interior wheel well boxes. Constructed covered in Aluminum Treadplate over plywood. Calculated by the linear foot of trailer length. Only available on 8.5 wide models.

Rubberized Black Treadplate on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood on ramp door and flap.

Rubberized Treadplate Floor-Any Width Model ($35 PLF)

Installed over the plywood floor on any width trailer. Calculated by linear foot x length of trailer.

Spare Tire Floor Recessed Storage Compartment (8.5' Models) w/6” or 8” Main Frame

Recessed in the trailer floor. Inside access storage for one spare wheel/tire. Available on 20' or longer  8.5' wide models only . Photo for illustration purposes only, finished product may vary.

Steel 1/4” Treadplate Floor ILO Plywood ($124 Per Linear Foot)

Installed in lieu of a plywood floor. Calculated x length on any width model.  

Steel 1/8” Treadplate Floor ILO Plywood ($94 Per Linear Foot)

Installed in lieu of a plywood floor. Calculated x length on any width model.  

Upgrade to ”Pressure Treated” 3/4” Plywood Floor ($20 PLF)

Choose this option to upgrade from the standard 3/4” plywood floor to pressure treated 3/4” plywood. Price calculated x per linear foot of trailer, any width model.

Add 03” Interior Height ($10 per linear ft) ONLY Available to Add on 6' or 7' Wide Models

This option is ONLY available on 6' or 7' wide models standard with 6'3” inside height, to increase inside height to 6'6”. Adds to inside trailer standard height and rear opening height on 6' or 7' wide models ONLY. Price calculated per linear foot x length of trailer.

Add 06” Interior Height ($12 per linear ft) Any Width Model

Adds 6” to inside trailer standard height and rear opening height on any width model. Price calculated per linear foot x length of trailer.

Add 09” Interior Height ($16 per linear ft) ONLY Available to Add on 6' or 7' Wide Models

This option is ONLY available on 6' or 7' wide models standard with 6'3” inside height, to increase inside height to 7'. Adds to inside trailer standard height and rear opening height on 6' or 7' wide models ONLY. Price calculated per linear foot x length of trailer.

Add 12” Interior Height ($20 per linear ft) Any width Model

Adds interior height to trailer and rear opening height. Price calculated per linear foot x length of trailer.

Add 18” Interior Height ($25 per linear ft) Any Width Model *REQUIRES UPGRADING TO SUPER DUTY RAMP DOOR

REQUIRES UPGRADING TO SUPER DUTY RAMP DOOR! Add 18” to the standard interior height and rear door opening height. Price calculated per linear foot x length of trailer.

Add 24” Interior Height ($38 per linear ft) Any Width Model *REQUIRES UPGRADING TO 12” OC WALL POSTS & TO SUPER DUTY RAMP DOOR

REQUIRES OTHER UPGRADES! Increases the interior height and rear opening height of any width model. Price calculated per linear foot x length of trailer.

Add 30” Interior Height ($42 per linear ft) Any Width Model *REQUIRES UPGRADING TO 12” OC WALL POSTS & TO SUPER DUTY RAMP DOOR

REQUIRES OTHER UPGRADES! Increases the interior height and rear opening height of any width model. Price calculated per linear foot x length of trailer.

Add 36” Interior Height ($48 per linear ft) Any Width Model *REQUIRES UPGRADING TO 12” OC WALL POSTS & TO SUPER DUTY RAMP DOOR

REQUIRES OTHER UPGRADES! Increases the interior height and rear opening height of any width model. Price calculated per linear foot x length of trailer.

Add 42” Interior Height ($56 per linear ft) Any Width Model *REQUIRES UPGRADING TO 12” OC WALL POSTS & TO SUPER DUTY RAMP DOOR

REQUIRES OTHER UPGRADES! Increases the interior height and rear opening height of any width model. Price calculated per linear foot x length of trailer.

Add 48” Interior Height ($62 per linear ft) Any Width Model *REQUIRES UPGRADING TO 12” WALL POSTS & TO SUPER DUTY RAMP DOOR

REQUIRES OTHER UPGRADES! Increases the interior height and rear opening height of any width model. Price calculated per linear foot x length of trailer.

Add 54” Interior Height ($70 per linear ft) Any Width Model *REQUIRES UPGRADING TO 12” OC Wall Posts & TO SUPER DUTY RAMP DOOR

REQUIRES OTHER UPGRADES! Increases the interior height and rear opening height of any width model. Price calculated per linear foot x length of trailer.

REDUCE Inside/Overall Height on Any Width Quality Cargo Model ($10 PLF)

Choose this option to REDUCE the standard inside/overall height of any width model. Allow for at least a 1” variance. Price is calculated x per linear foot of length of any width model

Add 12” High ATP Interior Kickplate Around Walls ($17 Per Linear Foot)

This ads a 12” high aluminum tread plate (ATP) kickplate around the interior walls of any width trailer. Calculated x the length on any width trailer.

Add 12” High Black Rubber Tread Interior Kickplate Around Walls ($19 Per Linear Foot)

This ads a 12” black rubber tread kickplate around the interior walls of any width trailer. Calculated x the length on any width trailer.

Aluminum Metal on Ceiling ($36 Per Linear Foot)

Installed metal ceiling liner. Any standard free metal color choice. Calculated x length of any width model.

Aluminum Metal on Walls ($44 Per Linear Foot)

Installed on all walls (not included on the ramp door). Any color standard metal. Purchase a ramp door covering separately if desired. Calculated x length on any width model.

Aluminum Tread Plate (ATP) Metal on Walls ($45 Per Linear Foot)

Installed on all walls (not included on the ramp door). ATP-Aluminum tread plate metal. Purchase a ramp door covering separately if desired. Calculated x length on any width model.

Aluminum Tread Plate (ATP) on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood door and flap.

Aluminum Tread Plate On Ramp Door & Flap (Any Width Model)

Installed over plywood on door and flap.

Black and White Checkered Vinyl on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood door and flap.

Ceiling Insulation ($15 PLF) Also Requires a Ceiling Liner Purchase to Hold Insulation  

Requires a ceiling liner type of your choice to hold up the ceiling insulation.  Ceiling liner must be purchased separately. Calculated x length on any width model.

Loft/Shelf (Built width of trailer starting at front-minimum 4') $200 per foot

Usually on trailer with at least 12” extra height, depending on how low from ceiling you want the loft shelf. Plywood loft installed full width of trailer. Not designed for extra heavy loading. Add to cart, change quantity in cart to desired number of feet of loft. Minimum 4' required.

Partition Wall 3/8 Plywood Finish (no door)

Placed at your chosen location. No thru door included. Purchase any size door separately under door options, if desired.

Partition Wall POCKET DOOR Added

Add this to any partition wall purchase. Door opening will be as wide as possible based on width of trailer.

Partition Wall w/Matching Interior Finish-No Door) *Must purchase interior wall finish choice separately

Placed at your chosen location. No thru door included. Wall will be covered in the same interior trailer wall covering you must purchase separately. Purchase any size door separately under door options, if desired.

Raw Luan (Thin Plywood) Ceiling Liner ($12 Per Linear Foot)

Installed as ceiling liner, raw thin plywood finish. Our least expensive ceiling liner. Calculated by the foot x trailer length on any width model.

Rubberized Black Treadplate on Ramp Door & Flap-Any Width Trailer

Installed over the standard plywood on ramp door and flap.

Steps & Base Cabinets Built-In Across The Inside Bottom of Riser Wall on Any Gooseneck Model

This will add both built in base cabinets and steps across the bottom of riser for cabinet storage and easy inside access up into the riser area on a gooseneck model.

Steps ONLY Built-In to Access Inside Riser Area on Any Gooseneck Model

This will add steps for your easy inside access up into the riser area on a gooseneck model.

Upgrade From Standard 3/8” to Pressure Treated 3/8” Plywood Walls ($35 PLF)

This upgrades any width model from standard 3/8” plywood walls to pressure treated 3/8” plywood walls. Calculated x the linear foot length of any width trailer.

Wall Insulation ($20 PLF)

Insulation behind the plywood walls. Calculated x length on any width model.

Walls Completely Covered (Floor to Ceiling) in Black Carpet-Any Width Model Up to 8' Inside Height ($94 PLF)

Fully covered black carpet on all side walls, floor to ceiling, up to an inside height of 8'. Price calculated per linear foot x length of any width model.

Walls Covered 36” High in Black Carpet-Any Width Model ($44 PLF)

Walls covered 36” high with black carpet on all side walls. Price calculated per linear foot x length of any width model.

White Vinyl On Ceiling ($20 PLF)

Installed white vinyl ceiling liner

White Vinyl On Walls ($28 PLF)

Installed over standard plywood wall. Price x per linear foot of any width model.

Wood Shelf 24” Deep w/Lip Mounted Inside Across 5', 6' or 7' Wide V-Nose or Flat Front Model (per shelf)

Mounted on front wall.

Wood Shelf 24” Deep w/Lip Mounted Inside Across 8.5 Wide V-Nose or Flat Front Model (per shelf)

Mounted on front wall.

Complete Concession Water Service & Sinks Package (TA Models Only-Requires Min 6” Main Frame)

NOTE: On models with 4” main frame standard, you must also purchase the separate upgrade to 6” or 8” Main Frame. This Water and Sinks Package includes: Base cabinet with 2 doors, stainless triple dish wash sinks, separate stainless single hand wash sink, 30-40 gal fresh water tank (mounted inside under cabinet) 40-50 gal Gray water holding tank (mounted under trailer), electric water heater, water pump, GFI 110V outlet, city fill and waste outlets. (110V electrical service panel must be purchased separately, if desired.)

Grease Trap (14lb) Added to Holding Tank on A Water Service Purchase

Must purchase water service.

Grease Trap (20lb) Added to Holding Tank on A Water Service Purchase

Must purchase water service.

Mop Sink 24”x24”-ADDED (No Water Service)

Add on to any water service purchase.

Propane Tank Steel Storage Cage ONLY & Covered in ATP-(For 100 lb Tank)

Steel propane storage cage only and covered in aluminum treadplate (ATP). Used to store 100 lb propane tank. Price per each cage. Generally mounted on front of trailer. NOTE: Propane tank not offered.

Propane Tank Steel Storage Cage ONLY-(For 100 lb Tank)

Steel propane storage cage only to store 100 lb propane tank. Price per each cage. Generally mounted on front of trailer. NOTE: Propane tank not offered.

Shelf 24” Deep Plywood w/Lip Edge-Wall Mounted ($34 per foot) Minimum 3'

Add 24” deep plywood shelf w/lip edge at your wall location. Price is per foot. Add to cart then change cart to your desired shelf length(s).

Shelf Across Depth of Any Size V-Nose Model-Plywood Shelf w/Lip Edge

Add one shelf across front of any V-nose model at your desired height.

Shelf/Counter 12” Deep-Metal Wrapped on Stationary Legs (Min 3') $44 per foot

Choose this if you want a stationary shelf/counter inside any trailer. Your choice wall location. Add to cart then change quantity in cart to desired length.

Shelf/Counter 18” Deep-Metal Wrapped on Stationary Legs (Min 3') $54 per foot

Choose this if you want a stationary 18” deep shelf/counter inside any trailer. Your choice wall location. Add to cart then change quantity in cart to desired length.

Single Hand Wash 15”x15”x15” Sink in 24”x24” Base Cabinet (NO Water Service)

This extra sink in a cabinet can be ADDED ON to any water service package purchase. Does not include basic water service pack. Must purchase separately if desired.

Single Hand Wash Sink in 36” Base Cabinet (With Full Water Service)

Includes single hand wash sink in a 36” base cabinet, fresh and gray water holding tanks, water heater, pump, city fill and drain.

Sink Splash Guard ADDED w/Any Sink

Add for any sink purchase.

Vent Hood System-04' Long (Requires Minimum 7' Interior Height)

Complete 4' long vent hood system, with one exhaust fan. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-05' Long (Requires Minimum 7' Interior Height)

Complete 5' long vent hood system, with one exhaust fan. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-06' Long (Requires Minimum 7' Interior Height)

Complete 6' long vent hood system, with one exhaust fan. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-07' Long (Requires Minimum 7' Interior Height)

Complete 7' long vent hood system, with one exhaust fan. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-08' Long (Requires Minimum 7' Interior Height)

Complete 8' long vent hood system, with one exhaust fan. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-09' Long (Requires Minimum 7' Interior Height)

Complete 9' long vent hood system, with one exhaust fan. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-10' Long (Requires Minimum 7' Interior Height)

Complete 10' long vent hood system, with one exhaust fan. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-11' Long w/Twin Exhaust Fans (Requires Minimum 7' Interior Height)

Complete 11' long vent hood system, with TWO exhaust fans. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

Vent Hood System-12' Long w/Twin Exhaust Fans (Requires Minimum 7' Interior Height)

Complete 12' long vent hood system, with TWO exhaust fans. NOTE: Fire suppression system NOT included-requires your after-market certified 3rd party install.

8' x 10' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

8' x 12' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

8' x 8' Aluminum Observation Deck w/Rails, Ladder, ATP Covered Deck Floor (8.5 Wide Models Only)

Includes: Aluminum tread plate (ATP) covered and trimmed plywood deck floor, fold-down rails, access ladder. Can be installed on flat front or V-nose 8.5 wide models.

Aluminum Exterior Ladder (For Roof Access)

Normally installed on front of any width trailer (flat on V-Nose). Can be installed on curb (passenger) side of any 5',6',7' wide model. Cannot be installed on side of 8.5 wide model. Specify your desired ladder placement location in your checkout notes.

Aluminum Roof Ladder Rack Cross Arm (per each arm installed) Minimum 2 Arms Required

Requires a minimum of 2 arms. Each arm rated to hold a max 175-200 lbs. Recommended to not be installed farther apart than 6'

Ladder Rack-Side Mounted (Includes One Pair) *Not Available on 8.5 Wide Models

Includes two side mounted ladder hanger racks (one pair). Only available on 5'-6'-7' wide models. Illegal to hang on side of 8.5 wide models.

One Piece Aluminum Roof-Any Width Model ($15 PLF)

Add this for any width trailer model. (Standard roofs are seamed Galvalume metal with high tech roof sealant) Calculated per linear foot x trailer length.

Upgrade to 12” On Center Roof Braces-Any Width Model ($16 PLF)

Upgrade any width model from standard 24” to 12” on center roof brace members. Price is calculated per linear foot x trailer length.

Upgrade to 16” On Center Roof Braces-Any Width Model ($10 PLF)

Upgrade any width model from standard 24” to 16” on center roof brace members. Price is calculated per linear foot x trailer length.

Walk-On Roof Available on 6', 7' or 8.5 Wide Models ($50 PLF)

Choose this option to have a full walk-on roof. Includes: 12” on center roof cross bow members, 3/4” plywood on top of roof bows and a one piece aluminum roof. Price is calculated per linear foot x full length of trailer ordered.

Add Bar Lock for Padlock on Any Standard Side Door w/Flush Key Lock

All Quality Cargo trailers with side doors standard come with an RV style flush key lock. Add this bar lock to use with a pad lock for a extra security, if desired.

Bogey Roller Wheels Welded to Frame Under Rear (Pair)

Steel bogey wheels price is for one pair, welded under rear frame to protect rear of trailer from dragging when going over steep inclines . Photo for illustration purposes only, size and location set may vary.

Caster Roller Wheel on Any Tongue Jack (cannot be added on a flip up jack)

Choose to add a roller caster wheel on your standard tongue jack.

Drop Leg Rear Stabilizer Jacks (1-Pair) 

One pair drop leg telescoping jacks mounted inside rear, one on each rear corner.

E-Track (Steel) Mounted VERTICALLY In Side Walls ($30 per foot)

Steel flush mounted VERTICLE wall E-track.  Must calculate total feet to purchase, determined by inside height of trailer and how many vertical tracks you desire on each side wall, from floor to ceiling. Add to cart and then update quantity in cart to desired number of feet. We will want you to furnish a hand drawing showing desired placement of tracks.

E-Track (Vertical Wall) Top Re-enforcing Brace Only ($35 per each)

If purchasing vertical wall E-track, you can ADD this diagonal brace at the top of each run of vertical mounted wall E-track for additional re-enforcement. Will be exposed and extend approx 12” out/down from ceiling. Price is each and one required for each run of vertical wall E-track.

E-Track Welded Flush Mount in Floor ($20 Per Foot)

Minimum order one run x overall length of trailer you are ordering. Floor E-track with steel backer is welded in framework, flush mounted with floor. Change to how many total linear feet you desire in your cart at checkout. Example: 20' trailer with two runs of floor E-track requires 40' total be added to cart.

E-Track Welded Flush Mount in Wall ($18 Per Foot)

Must order minimum one run x length of your trailer. Steel E-track is welded into framework and flush mounted in the plywood wall. Order it by the linear foot. Determine how many runs you want on each side wall, change the total feet in your cart before checkout. Standard height is 36” above finished floor unless you specify otherwise at time of order. Example: 20' trailer with one run down each wall requires 37' of E-track in your cart. (40' less 3' for side door). For two runs down each wall requires 77' (80' less 3' for side door)

Electric Tongue Jack (3000#) w/12V Battery

Photo for illustration purposes only, brand and style may vary. Installed in place of standard manual tongue jack on any bumper pull model

Electric Tongue Jack (5000#) w/12V Battery

Photo for illustration purposes only, brand and style may vary. Installed in place of standard manual tongue jack on any bumper pull model

Floor Mount D-Rings (Each)

Welded to frame, flush mounted in your location choice. (8.5 wide models come standard with 2 in front and 2 in rear)

Fold Down Stabilizer Jacks (1-Pair) 

One pair adjustable fold down jack standard mounted one on each rear corner. Can also be mounted on front corners, but must specify.

Scissor Stabilizer Jacks (1-pair) 5,000# Capacity

Normally welded on rear corners. 2nd pair can also be welded on front corners if you specify. Price is for one pair.

Tongue Flip-up (2000#) Jack UPGRADE From Standard Stationary Jack

This option will upgrade from the standard 2000# tongue jack to a side rail mounted flip-up tongue 2000# jack. Not recommended for larger tandem axle models with heavier tongue weight. (Cannot be used with a caster wheel added)

Tongue Jack Set Farther Back (Flat Front or V-Nose w/Extended Tongue)

This option moves the tongue jack on any width model back farther away from the standard location near the coupler in order to miss the truck tailgate when down. (Can only be used on a flat front model. To add on a V-nose model you must also order an extended tongue to give enough room)

Upgrade from Standard 2,000 lb to 5,000 lb Tongue Jack

Installed in place of the standard 2,000 lb tongue jack

Upgrade from Standard Tongue Jack to a HD Square Sidewinder Jack

Installed in place of the standard 2,000 lb tongue jack

Upgrade to 7,000 lb Drop Leg Tongue Jack- 8.5 Wide Models

Upgrades from standard tongue jack. Only available on 8.5' wide models.

Upgrade to 8,000 lb Drop Leg Tongue Jack- 8.5 Wide Models

Upgrades from standard tongue jack. Only available on 8.5' wide models.

Wall Mount D-Rings (Each)

Your choice location, screwed into side wall normally 36” above floor unless you specify differently.

Winch Box (steel) Recessed in Floor w/Cable Roller (6” or 8” Main Frame Required)

Winch box recessed in floor at your desired location. For your after-market winch onstall.

Winch Plate (Steel) Welded in Frame Under Plywood-In Front

Steel plate welded to frame in center front. Is under plywood floor of trailer for your after-market winch mounting.

Shadow Box/Tailgater 3x4 Box w/Locking Door, 110V Outlet, Carpeted

Includes: Plywood shadow box with 3x4 locking concession door, one 110v receptacle, carpeted inside box. Perfect for television in your tailgate trailer. (Must add electrical service separately if desired)

Shadow Box/Tailgater 3x5 Box w/Locking Door, 110V Outlet, Carpeted

Includes: Plywood shadow box with 3x5 locking concession door, one 110v receptacle, carpeted inside box. Perfect for television in your tailgate trailer. (Must add electrical service separately if desired)

Shadow Box/Tailgater 3x6 Box w/Locking Door, 110V Outlet, Carpeted

Includes: Plywood shadow box with 3x6 locking concession door, one 110v receptacle, carpeted inside box. Perfect for television in your tailgate trailer. (Must add electrical service separately if desired)

Shadow Box/Tailgater 3x8 Box w/Locking Door, 110V Outlet, Carpeted

Includes: Plywood shadow box with 3x8 locking concession door, one 110v receptacle, carpeted inside box. Perfect for television in your tailgate trailer. (Must add electrical service separately if desired)

Shadow Box/Tailgater 4x6 Box w/Locking Door, 110V Outlet, Carpeted

Includes: Plywood shadow box with 4x6 locking concession door, one 110v receptacle, carpeted inside box. Perfect for television in your tailgate trailer. (Must add electrical service separately if desired)

Shadow Box/Tailgater 4x8 Box w/Locking Door, 110V Outlet, Carpeted

Includes: Plywood shadow box with 4x8 locking concession door, one 110v receptacle, carpeted inside box. Perfect for television in your tailgate trailer. (Must add electrical service separately if desired)

Bunk Bed (mattresses not included)

Bunk bed only. No mattresses

Bunk Bed-ADD Safety Rail (each)

If ordering a bunk bed and desire a safety rail, add this option.

Full Size Bed w/Mattress

Full size bed includes mattress.

Queen Fold-up Bed w/Mattress

Queen size bed with mattress.

Single Fold-down Bed (mattress not included)

Fold-down single bed.

Sofa/Single Bed Combo

Combination sofa and converts to single bed.

Aluminum Tread Plate (ATP) Covered Plywood on Tongue (Also Requires An Extended Tongue Purchase)

If you are also purchasing any length extended tongue , you may choose this option to add an ATP covered plywood section over the A-frame tongue area.

Caster Roller Wheel on Any Tongue Jack (cannot be added on a flip up jack)

Choose to add a roller caster wheel on your standard tongue jack.

Deck-over UPGRADE Conversation on 8.5 Wide Model-Available on Any Length 8.5 Wide Bumper Pull or Gooseneck

Choose this option if ordering any length 8.5 wide model and you want the deck level (floor) to be over the top of the wheels. This raises the ground clearance by an additional approximately 8” higher than the standard 8.5 wide models, to about 25” of ground clearance.

Extended 3' Long V-Nose

This option adds length to a standard V-nose

Extended 4' Long V-Nose

This option adds length to a standard V-nose

Flat Front Instead of Standard V-Nose Front-All Models (Free Change)

This is a no charge change for any width model.

Framed Opening In Trailer Wall/Ceiling-For Your After Market Use (Specify Size & Location)

Add this if you need a framed opening welded in the trailer wall (or ceiling) for your after market install of anything. This is NOT a roof A/C brace. NOTE: This frame will be welded as close to your specified location as possible. The metal will be over the outside and the plywood will be cut out on the inside. You must provide the size of opening desired and the specified location.

Generator Platform On Tongue (Requires Extended Triple Tube Tongue Upgrade)

This is a platform built on tongue, constructed with steel frame, plywood insert, covered in ATP. Depending on how big you want the platform, you must also purchase an extended tripe tube tongue.

Generator Slide-Out Platform Tray (add to a generator storage box)

This is a platform tray is on slides that allows you to slide your generator in and out more easily. For use only with purchase of an interior or exterior generator box compartment that must be purchased separately.

Gooseneck Model Changed to Tapered Nose Front

Change any gooseneck model from standard flat front to a tapered nose front, Looses inside space in riser.

Gooseneck Model Changed to V-Nose Front

Change any gooseneck model from standard flat front to V-nose front, Looses inside space in riser.

Gussets Added on Rear Door Frame Corners-Any Size Trailer

If you want a heavier supported rear door frame than the standard framework, this option adds a gusset on all four corners of the rear door framework for extra strength and support.

Move a Standard Side Door to the REAR In a SOLID WALL ILO Ramp Door (6', 7', 8.5' Wide Models)

ILO a standard rear ramp door. Choose this option if you want to relocate the standard side door from the side of trailer to be mounted in a solid rear wall across the rear of the trailer.

Move a Standard Side Door to the V-Nose Front on Curbside (6', 7', 8.5' Wide Models))

Choose this option if you want to relocate the standard side door from the side of trailer to the front V-nose on curbside.

Ramp-overs for Driving Over Interior Wheel Well Boxes (8.5 Wide Models Only) $165 PLF

Wheel well ramp-overs, one on each side inside the trailer to drive a vehicle up and over the top of the steel interior wheel well boxes. Constructed covered in Aluminum Treadplate over plywood. Calculated by the linear foot of trailer length. Only available on 8.5 wide models.

Rear Winged Top-NO LIGHTS-Any Width Model

Add this option for a rear wing top with NO lights in wing,  on any model. Pictured with the optional blackout package sold separately.

Rear Winged Top-w/10” Lights-Any Width Model

Add this option for a rear wing top with lights in wing on any model. Pictured with the optional blackout package sold separately.

Slant Top V on Any V-Nose Model

This option will slant the roof top on any standard V-nose model.

Tongue Jack Set Farther Back (Flat Front or V-Nose w/Extended Tongue)

This option moves the tongue jack on any width model back farther away from the standard location near the coupler in order to miss the truck tailgate when down. (Can only be used on a flat front model. To add on a V-nose model you must also order an extended tongue to give enough room)

Upgrade Any Model Standard w/ 3” to a 4” Main Frame ($12 PLF)

This upgrades any model standard with a 2x3” main frame to a 2x4” main frame. Calculated at per linear foot x trailer length.

Upgrade Any Model Standard w/ 3” to a 6” Main Frame ($25 PLF)

This upgrades any model standard with a 2x3” main frame to a 2x6” main frame. Calculated at per linear foot x trailer length.

Upgrade Any Model Standard w/ 4” to a 6” Main Frame ($15 PLF)

This upgrades any model standard with a 2x4” main frame to a 2x6” main frame. Calculated at per linear foot x trailer length.

Upgrade Any Model Standard w/ 4” to a 8” Main Frame ($30 PLF)

This upgrades any model standard with a 2x4” main frame to a 2x8” main frame. Calculated at per linear foot x trailer length.

Upgrade Any Model Standard with 6” to 8” Main Frame ($30 PLF)

This upgrades any model standard with a 6” main frame to a 8” main frame. Calculated at per linear foot x trailer length.

Upgrade to 12” On Center Floor Braces (Any Width) $18 PLF

Upgrade any width model to 12” on center floor brace members. Price calculated per liner foot x trailer length.

Upgrade to 12” On Center Roof Braces-Any Width Model ($16 PLF)

Upgrade any width model from standard 24” to 12” on center roof brace members. Price is calculated per linear foot x trailer length.

Upgrade to 12” On Center Wall Posts-Any Width ($24 PLF)

Upgrade any width model from standard 16” to 12” on center wall post members. Price calculated per linear foot x trailer length.

Upgrade to 16” On Center Roof Braces-Any Width Model ($10 PLF)

Upgrade any width model from standard 24” to 16” on center roof brace members. Price is calculated per linear foot x trailer length.

Walk-On Roof Available on 6', 7' or 8.5 Wide Models ($50 PLF)

Choose this option to have a full walk-on roof. Includes: 12” on center roof cross bow members, 3/4” plywood on top of roof bows and a one piece aluminum roof. Price is calculated per linear foot x full length of trailer ordered.

13,500 BTU A/C with Heat Strip (includes roof brace & wire)

Roof mounted normally centered in trailer. (Can be changed to your specified roof location). If multiple A/C's are purchased will normally be evenly spaced in roof. Price includes the required wire and brace but 110V electrical service package must be purchased separately, unless you plan to install your electrical service after-market..

15,000 BTU A/C with Heat Strip (includes roof brace & wire)

Roof mounted normally centered in trailer unless otherwise specified in checkout notes when ordered. Price includes the required wire and brace.

A/C Brace & Wire Stub to Mount an After-Market Roof A/C Unit

Buy the brace & wire stub without buying an A/C, for your use to install a future A/C. Placed centered in roof with wire stub to front wall.

A/C Brace Only to Mount an After-Market Roof A/C Unit (No Wire Stub)

Buy the roof mount brace only without buying an A/C, for your use to install a future A/C. Placed centered in roof with no wire stub.

A/C Wall Thermostat (Bluetooth) Requires One Thermostat per AC Unit (per each)

Add an optional wall mount AC thermostat, Bluetooth compatible, for a roof mount AC unit. Note: Controls are only on the AC inside roof base unit if no thermostat is purchased, so trailers with tall inside height usually need a wall thermostat.

Add a Manual Non-Powered Roof Vent (Each)

Add this option if you want a manual roof vent centered in trailer roof. All trailers come standard with one pair of plastic flow thru side wall vents.

Add Extra Plastic Flow Thru Side Wall Vents (1 pair)

Choose this option to add a 2nd pair of stationary plastic flow through side air vents. One pair comes standard on all models. Mounted 1 front and 1 rear

Aluminum 2-Way Sidewall Vents-(One Pair)

Choose this to add 2-way deluxe aluminum air vents. All Quality Cargo models come standard with plastic flow thru side wall vents. Mounted 1- front, 1- rear

Max Air Roof Vent Cover Installed

If you purchase a roof vent and want to be able to keep it open while driving or during the rain when camping, etc. add this cover.

Mini Split 12k BTU A/C System w/Heat w/ONE Blower Head-w/Remote Control-w/Exterior Expanded Metal Cover Cage

Includes ONE inside blower head, remote control, exterior unit mounted and covered in protective expanded metal (wire mesh) cage. Normally mounted on flat or V-front exterior.

Mini Split 18k BTU A/C System w/Heat w/THREE Blower Heads-w/Remote Control-w/Exterior Expanded Metal Cover Cage

Includes THREE inside blower heads, remote control, exterior unit mounted and covered in protective expanded metal (wire mesh) cage. Normally mounted on flat or V-front exterior.

Mini Split 18k BTU A/C System w/Heat w/TWO Blower Heads-w/Remote Control-w/Exterior Expanded Metal Cover Cage

Includes TWO inside blower heads, remote control, exterior unit mounted and covered in protective expanded metal (wire mesh) cage. Normally mounted on flat or V-front exterior.

Mini Split 24k BTU A/C System w/Heat w/ONE Blower Head-w/Remote Control-w/Exterior Expanded Metal Cover Cage

Includes ONE inside blower head, remote control, exterior unit mounted and covered in protective expanded metal (wire mesh) cage. Normally mounted on flat or V-front exterior.

Roof Vent w/Fan (12V or 110V Powered)

Add this if you want to have a roof vent with a powered exhaust fan. Available as 12V or 110V but you must add an electrical package for the 110V power or it will be 12V power from your vehicle 12V power supply, the same as your 12V inside dome light.

Upgrade to a Manual Non-Powered Roof Vent From Standard Plastic Flow Thru Vents

Add this option if you want to UPGRADE from the standard plastic flow thru side air vents to a manual roof vent centered in trailer roof. All trailers come standard with one pair of plastic flow thru side wall vents.

One 15” Standard Steel 5 Lug Matching Radial Spare Wheel/Tire (Fits 3500# Axle)

This spare fits any standard 3500/2990 lb 5 lug axle model. Shown mounted on wall bracket that must be purchased separately if desired. Photo may not be exact, for illustration purposes only.

One 15” Standard Steel 6-Lug Matching Spare Wheel/Radial Tire-(2257515) Fits 5200 lb Axle

This spare fits a 6 lug 5200 Lb axle

One 16” Standard Steel 8-Lug Matching Spare Wheel/Radial Tire (23580R16-E) Fits 7,000 lb Axle

This spare fits a 7,000 lb 8 lug axle

One Matching Spare 15” 5-Lug Spider Alloy Mag Wheel w/Radial Tire (Fits 5-Lug 3500/2990 lb Axle)

Choose this to add a matching spider alloy mag spare wheel/tire for any 5-lug 3500/2290 axle model. Must add an inside or outside front mount bracket separately if desired, or spare will be loose in trailer.

One Matching Spare 15” 6-Lug Spider Alloy Mag Wheel w/Radial Tire (Fits 6-Lug 5200 lb Axle)

Choose this to add a matching spider alloy mag spare wheel/tire for any 6-lug 5200 lb axle model. Must add an inside or outside front mount bracket separately if desired, or spare will be loose in trailer.

One Matching Spare 16” 8-Lug Spider Alloy Mag Wheel w/Radial Tire (Fits 8-Lug 7000 lb Axle)

Choose this to add a matching spider alloy mag spare wheel/tire for any 8-lug 7000 lb axle model. Must add an inside or outside front mount bracket separately if desired, or spare will be loose in trailer.

Spare Tire Floor Recessed Storage Compartment (8.5' Models) w/6” or 8” Main Frame

Recessed in the trailer floor. Inside access storage for one spare wheel/tire. Available on 20' or longer  8.5' wide models only . Photo for illustration purposes only, finished product may vary.

Spare Tire Mast Tongue Mount-”Bracket Only”-Outside Front Mount w/Required Extended Tongue

To fit any size spare wheel purchased separately. Mounted on outside front with extended tongue included to accommodate spare.

Spare Tire Mount-”Bracket Only”-Inside Mount (or Outside on Flat Front or V-nose w/Extended Tongue)

To fit any size spare wheel purchased separately. Can be placed at any inside location. Normally mounted on inside front wall curbside by side door. Can be mounted outside front only on a flat front model or a V-nose model aith at least 12” extended tongue added separately.

Upgrade 3500 lb Tandem Axles to Spider Mag/Radial Tire (20575R15-C)

Upgrades all 4 wheels on any tandem axle 3500 lb 5-lug axle model

Upgrade Any Single 5200 lb Axle Model to Spider Mag Rims w/2257515 Radial Tires (fits 6 lug single axle 5200 lb)

Upgrades both wheels to spider alloy mags from standard 6 lug steel wheels.

Upgrade Any Tandem 5200 lb Axles Model to Spider Mag Rims w/2257515 Radial Tires (fits 6 lug 5200 lb tandem axles)

Upgrades all 4 wheels to spider alloy mags from the standard steel 6 lug wheels

Upgrade Any Triple 5200 lb Axles Model to Spider Mag Rims w/2257515 Radial Tires (fits 6 lug 5200 lb Triple axles)

Upgrades all 6 wheels to spider mags on a 5200 lb triple axle model with 6 lug wheels.

Upgrade Any Triple 7000 lb Axles Model to Spider Mag Rims w/2358016E Radial Tires (fits 8 lug 7000 lb Triple axles)

Upgrades all 6 wheels on a triple 7k axle model from standard 8 lug steel wheels to spider alloy mags.

Upgrade Single 5 Lug 3500/2990 lb Axle to Spider Mag/Radial Tire (20575R15-C)

Upgrades both wheels from standard steel wheels on any single axle 5 lug 3500/2990 lb model

Upgrade Tandem Axle 7,000 lb Model to 16” Spider Mag Rims w/23580R16-E Radials (Fits 7,000 lb 8 Lug Axles)

Upgrades all 4 wheels to spider mag alloy wheels on tandem axle model with 8 lug axles.

15”x 18” Stationary Window

Normally used in a side door.

30” High X 15” Wide Vertical Slider Window w/Screen

Can be installed in your location choice.

30” Wide X 15” High Horizontal Slider Window w/Screen

Can be installed in your location choice on any side wall.

30” Wide x 30” High Side-to-Side Slider Window w/Screen

Your choice location in side wall

Lexan (Plexi-Glass Style) Stationary Window-Any Size up to 4x8

Choose your size up to 4x8. Any size is same price.